- 21 Dec, 2017 25 commits
-
-
Bert Kenward authored
While the Linux driver doesn't use CTPIO ('cut-through programmed I/O'), other drivers on the same port might, so if we're responsible for reporting per-port stats we need to include the CTPIO stats. Signed-off-by:Bert Kenward <bkenward@solarflare.com> Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
There's no explicit capability bit, so we just condition them on having efx->num_mac_stats >= MC_CMD_MAC_NSTATS_V2. Signed-off-by:
-
Edward Cree authored
Medford2 NICs support more than MC_CMD_MAC_NSTATS stats, and report the new count in a field of MC_CMD_GET_CAPABILITIES_V4. This also means that the end generation count moves (it is, as before, the last 64 bits of the DMA buffer, but that is no longer MC_CMD_MAC_GENERATION_END). So read num_mac_stats from the GET_CAPABILITIES response, if present; otherwise assume MC_CMD_MAC_NSTATS; and always use num_mac_stats - 1 rather than MC_CMD_MAC_GENERATION_END. Signed-off-by:
-
Edward Cree authored
Signed-off-by:
-
Ganesh Goudar authored
Add device id's 0x50ac, 0x6087 for T5 and T6 cards respectively. Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Jie Deng authored
Get rid of custom hex_dump_to_buffer(). The output is slightly changed, i.e. each byte followed by white space. Note, we don't use print_hex_dump() here since the original code uses nedev_dbg(). Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Jie Deng <jiedeng@synopsys.com> Signed-off-by:
-
Russell King authored
Attaching more than one PHY to phylink is bad news, as we store a pointer to the PHY in a single location. Error out if more than one PHY is attempted to be attached. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Christian Lamparter authored
The RGMII spec allows compliance for devices that implement an internal delay on TXC and/or RXC inside the transmitter. This patch adds the necessary RGMII_[RX|TX]ID mode code to handle such PHYs with the emac driver. Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
Christian Lamparter authored
The ibm_emac driver predates the PHY_INTERFACE_MODE_* enums by a few years. And while the driver has been retrofitted to use the PHYLIB, the old definitions have stuck around to this day. This patch replaces all occurences of PHY_MODE_* with the respective equivalent PHY_INTERFACE_MODE_* enum. And finally, it purges the old macros for good. Signed-off-by:
-
Christian Lamparter authored
phy_modes() in the common phy.h already defines the same phy mode names in lower case. The deleted rgmii_mode_name() is used only in one place and for a "notice-level" printk. Hence, it will not be missed. Signed-off-by:
-
David S. Miller authored
Alexander Aring says: ==================== net: sched: sch: introduce extack support this patch series basically add support for extack in common qdisc handling. Additional it adds extack pointer to common qdisc callback handling this offers per qdisc implementation to setting the extack message for each failure over netlink. The extack message will be set deeper in qdisc functions but going not deeper as net core api. For qdisc module callback handling, the extack will not be set. This will be part of per qdisc extack handling. I also want to prepare patches to handle extack per qdisc module... so there will come a lot of more patches, just cut them down to make it reviewable. There are some above 80-chars width warnings, which I ignore because it looks more ugly otherwise. This patch-series based on patches by David Ahern which gave me some hints how to deal with extack support. Cc: David Ahern <dsahern@gmail.com> changes since v4: - rebase on current net-next/master - fix several typos (also David Ahren to Ahern, I am sorry) - Add acked by Jamal changes since v3: - remove patch 2/2 lib: nlattr: set extack msg if validate_nla fails since David Ahern has a better solution - Remove check on net admin permission since -EPERM indicates it already - Change rtab to "rate table" - this is what it's stands for - Fix cbs *not* support messages - Fix tcf block error message for allocation, allocation will be still there because there are multiple places which returns -ENOMEM - Finnally also took care about sch_atm, sorry somehow I forgot this one and I hope I didn't forgot any sch implementation to add new callback parameters changes since v2: - add fix coding style patch to catch all checkpatch warnings - add patch for setting netlink extack msg if validate_nla fails - changes in handle generic qdisc errors - remove NL_SET_ERR_MSG from memory allocation errors - remove NL_SET_ERR_MSG from device not found - change STAB to table size - add various new patches to add extack support for common TC functions like qdisc_get_rtab, tcf_block_get, qdisc_alloc and qdisc_create_dflt - users which are interessted in the detailed error messages can assign extack, otherwise NULL. - Add sch_cbq as example for qdisc_ops callback: init, qdisc_class_ops callbacks: change and graft - Add sch_cbs as example for qdisc_ops callback: change - Add sch_drr as example for qdisc_class ops callbacks: tcf_block ==================== Signed-off-by: -
Alexander Aring authored
This patch adds extack support for the drr qdisc implementation by adding NL_SET_ERR_MSG in validation of user input. Also it serves to illustrate a use case of how the infrastructure ops api changes are to be used by individual qdiscs. Cc: David Ahern <dsahern@gmail.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Alexander Aring <aring@mojatatu.com> Signed-off-by:
-
Alexander Aring authored
This patch adds extack support for the cbs qdisc implementation by adding NL_SET_ERR_MSG in validation of user input. Also it serves to illustrate a use case of how the infrastructure ops api changes are to be used by individual qdiscs. Cc: David Ahern <dsahern@gmail.com> Acked-by:
-
Alexander Aring authored
This patch adds extack support for the cbq qdisc implementation by adding NL_SET_ERR_MSG in validation of user input. Also it serves to illustrate a use case of how the infrastructure ops api changes are to be used by individual qdiscs. Cc: David Ahern <dsahern@gmail.com> Acked-by:
-
Alexander Aring authored
This patch adds extack support for the function qdisc_create_dflt which is a common used function in the tc subsystem. Callers which are interested in the receiving error can assign extack to get a more detailed information why qdisc_create_dflt failed. The function qdisc_create_dflt will also call an init callback which can fail by any per-qdisc specific handling. Cc: David Ahern <dsahern@gmail.com> Acked-by:
-
Alexander Aring authored
This patch adds extack support for the function qdisc_alloc which is a common used function in the tc subsystem. Callers which are interested in the receiving error can assign extack to get a more detailed information why qdisc_alloc failed. Cc: David Ahern <dsahern@gmail.com> Acked-by:
-
Alexander Aring authored
This patch adds extack support for the function tcf_block_get which is a common used function in the tc subsystem. Callers which are interested in the receiving error can assign extack to get a more detailed information why tcf_block_get failed. Cc: David Ahern <dsahern@gmail.com> Acked-by:
-
Alexander Aring authored
This patch adds extack support for the function qdisc_get_rtab which is a common used function in the tc subsystem. Callers which are interested in the receiving error can assign extack to get a more detailed information why qdisc_get_rtab failed. Cc: David Ahern <dsahern@gmail.com> Acked-by:
-
Alexander Aring authored
This patch adds extack support for graft callback to prepare per-qdisc specific changes for extack. Cc: David Ahern <dsahern@gmail.com> Acked-by:
-
Alexander Aring authored
This patch adds extack support for block callback to prepare per-qdisc specific changes for extack. Cc: David Ahern <dsahern@gmail.com> Acked-by:
-
Alexander Aring authored
This patch adds extack support for class change callback api. This prepares to handle extack support inside each specific class implementation. Cc: David Ahern <dsahern@gmail.com> Acked-by:
-
Alexander Aring authored
This patch adds extack support for change callback for qdisc ops structtur to prepare per-qdisc specific changes for extack. Cc: David Ahern <dsahern@gmail.com> Acked-by:
-
Alexander Aring authored
This patch adds extack support for init callback to prepare per-qdisc specific changes for extack. Cc: David Ahern <dsahern@gmail.com> Acked-by:
-
Alexander Aring authored
This patch adds extack support for generic qdisc handling. The extack will be set deeper to each called function which is not part of netdev core api. Cc: David Ahern <dsahern@gmail.com> Acked-by:
-
Alexander Aring authored
This patch fix checkpatch issues for upcomming patches according to the sched api file. It changes mostly how to check on null pointer. Acked-by:
-
- 20 Dec, 2017 15 commits
-
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/net: updates 2017-12-20 Please apply the following patch series for 4.16. Nothing too exciting, mostly just beating the qeth L3 code into shape. ==================== Signed-off-by: -
Julian Wiedmann authored
There's a common helper for parsing an IP address string, let's use it. Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
The TSO and IQD paths already need to fix-up the current values, and OSA will require more flexibility in the future as well. So just let the caller specify the data length. Signed-off-by:
-
Julian Wiedmann authored
Consolidate the cast type translation, move the passthru path out of the RCU-guarded section, and use the appropriate rtable helpers when determining the next-hop address. Signed-off-by:
-
Julian Wiedmann authored
The L3 packet descriptor's 'dest_addr' field is used for a different purpose in RX descriptors. Clean up the hard-coded byte accesses and try to be more self-documenting. Signed-off-by:
-
Julian Wiedmann authored
When 1. an skb has no neighbour, and 2. skb->protocol is not IP[V6], we select the skb's cast type based on its destination MAC address. The multicast check is currently restricted to Multicast IP-mapped MACs. Extend it to also cover non-IP Multicast MACs. Signed-off-by:
-
Julian Wiedmann authored
Use the proper helpers to check for multicast IP addressing, and remove some ancient Token Ring code. Signed-off-by:
-
Julian Wiedmann authored
Instead of assuming that skb->data points to the Ethernet header, use the right helper and struct to access the Ethertype field. Signed-off-by:
-
Julian Wiedmann authored
Once all of qeth_l3_set_rx_mode()'s single-use helpers are folded back in, the two implementations actually look quite similar. So improve the readability by converting both set_rx_mode() routines to a common format. This also allows us to walk ip_mc_htable just once, instead of three times. Signed-off-by:
-
Julian Wiedmann authored
Be a little more self-documenting, and get rid of OSA_ADDR_LEN. Signed-off-by:
-
Julian Wiedmann authored
For adding/removing a MAC address, use just one helper each that handles both unicast and multicast. Saves one level of indirection for multicast addresses, while improving the error reporting for unicast addresses. Signed-off-by:
-
Julian Wiedmann authored
Instead of tracking the uc/mc state in each MAC address object, just check the multicast bit in the address itself. Signed-off-by:
-
Julian Wiedmann authored
commit "s390/qeth: use ip*_eth_mc_map helpers" removed the last occurrence of CONFIG_IPV6-dependent code. Signed-off-by:
-
Julian Wiedmann authored
Get rid of some wrapper indirection, and stop accessing the skb at hard-coded offsets. Signed-off-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable qeth_reply.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
David Windsor <dwindsor@gmail.com> Reviewed-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> [jwi: removed the WARN_ONs. Use CONFIG_REFCOUNT_FULL if you care.] Signed-off-by:
-
