- 07 Dec, 2016 14 commits
-
-
Willem de Bruijn authored
Add support for attaching an eBPF object by file descriptor. The iptables binary can be called with a path to an elf object or a pinned bpf object. Also pass the mode and path to the kernel to be able to return it later for iptables dump and save. Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Marcelo Ricardo Leitner authored
Andrey Konovalov reported that this vmalloc call is based on an userspace request and that it's spewing traces, which may flood the logs and cause DoS if abused. Florian Westphal also mentioned that this call should not trigger OOM killer. This patch brings the vmalloc call in sync to kmalloc and disables the warn trace on allocation failure and also disable OOM killer invocation. Note, however, that under such stress situation, other places may trigger OOM killer invocation. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Pablo Neira Ayuso authored
This patch adds support for set flushing, that consists of walking over the set elements if the NFTA_SET_ELEM_LIST_ELEMENTS attribute is set. This patch requires the following changes: 1) Add set->ops->deactivate_one() operation: This allows us to deactivate an element from the set element walk path, given we can skip the lookup that happens in ->deactivate(). 2) Add a new nft_trans_alloc_gfp() function since we need to allocate transactions using GFP_ATOMIC given the set walk path happens with held rcu_read_lock. Signed-off-by: -
Pablo Neira Ayuso authored
This new function allows us to deactivate one single element, this is required by the set flush command that comes in a follow up patch. Signed-off-by: -
Pablo Neira Ayuso authored
Context is not modified by nft_trans_alloc(), so constify it. Signed-off-by: -
Davide Caratti authored
SCTP GSO and hardware can do CRC32c computation after netfilter processing, so we can avoid calling sctp_compute_checksum() on skb if skb->ip_summed is equal to CHECKSUM_PARTIAL. Moreover, set skb->ip_summed to CHECKSUM_NONE when the NAT code computes the CRC, to prevent offloaders from computing it again (on ixgbe this resulted in a transmission with wrong L4 checksum). Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Liping Zhang authored
Otherwise, DHCP Discover packets(0.0.0.0->255.255.255.255) may be dropped incorrectly. Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Pablo Neira Ayuso authored
This patch adds the netlink code to filter out dump of stateful objects, through the NFTA_OBJ_TYPE netlink attribute. Signed-off-by: -
Pablo Neira Ayuso authored
This patch allows us to refer to stateful object dictionaries, the source register indicates the key data to be used to look up for the corresponding state object. We can refer to these maps through names or, alternatively, the map transaction id. This allows us to refer to both anonymous and named maps. Signed-off-by: -
Pablo Neira Ayuso authored
This patch allows you to refer to stateful objects from set elements. This provides the infrastructure to create maps where the right hand side of the mapping is a stateful object. This allows us to build dictionaries of stateful objects, that you can use to perform fast lookups using any arbitrary key combination. Signed-off-by: -
Pablo Neira Ayuso authored
Notify on depleted quota objects. The NFT_QUOTA_F_DEPLETED flag indicates we have reached overquota. Add pointer to table from nft_object, so we can use it when sending the depletion notification to userspace. Signed-off-by: -
Pablo Neira Ayuso authored
Introduce nf_tables_obj_notify() to notify internal state changes in stateful objects. This is used by the quota object to report depletion in a follow up patch. Signed-off-by: -
Pablo Neira Ayuso authored
This patch adds a new NFT_MSG_GETOBJ_RESET command perform an atomic dump-and-reset of the stateful object. This also comes with add support for atomic dump and reset for counter and quota objects. Signed-off-by: -
Pablo Neira Ayuso authored
Add a new attribute NFTA_QUOTA_CONSUMED that displays the amount of quota that has been already consumed. This allows us to restore the internal state of the quota object between reboots as well as to monitor how wasted it is. This patch changes the logic to account for the consumed bytes, instead of the bytes that remain to be consumed. Signed-off-by:
-
- 06 Dec, 2016 17 commits
-
-
Pablo Neira Ayuso authored
This new expression allows us to refer to existing stateful objects from rules. Signed-off-by: -
Pablo Neira Ayuso authored
Register a new quota stateful object type into the new stateful object infrastructure. Signed-off-by: -
Pablo Neira Ayuso authored
Register a new percpu counter stateful object type into the stateful object infrastructure. Signed-off-by: -
Pablo Neira Ayuso authored
This patch augments nf_tables to support stateful objects. This new infrastructure allows you to create, dump and delete stateful objects, that are identified by a user-defined name. This patch adds the generic infrastructure, follow up patches add support for two stateful objects: counters and quotas. This patch provides a native infrastructure for nf_tables to replace nfacct, the extended accounting infrastructure for iptables. Signed-off-by: -
Florian Westphal authored
... so we can use current skb instead of working with a clone. Signed-off-by:
-
Florian Westphal authored
The caller assumes that < 0 means that skb was stolen (or free'd). All other return values continue skb processing. nf_hook_slow returns 3 different return value types: A) a (negative) errno value: the skb was dropped (NF_DROP, e.g. by iptables '-j DROP' rule). B) 0. The skb was stolen by the hook or queued to userspace. C) 1. all hooks returned NF_ACCEPT so the caller should invoke the okfn so packet processing can continue. nft ingress facility currently doesn't have the 'okfn' that the NF_HOOK() macros use; there is no nfqueue support either. So 1 means that nf_hook_ingress() caller should go on processing the skb. In order to allow use of NF_STOLEN from ingress we need to translate this to an errno number, else we'd crash because we continue with already-free'd (or about to be free-d) skb. The errno value isn't checked, its just important that its less than 0, so return -1. Signed-off-by:
-
Gao Feng authored
I lost one test case in the last commit for xt_multiport. For example, the rule is "-m multiport --dports 22,80,443". When first port is unmatched and the second is matched, the curent codes could not return the right result. It would return false directly when the first port is unmatched. Fixes: dd2602d0 ("netfilter: xt_multiport: Use switch case instead of multiple condition checks") Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
-
Pablo Neira Ayuso authored
This patch adds a new flag that signals the kernel to update layer 4 checksum if the packet field belongs to the layer 4 pseudoheader. This implicitly provides stateless NAT 1:1 that is useful under very specific usecases. Since rules mangling layer 3 fields that are part of the pseudoheader may potentially convey any layer 4 packet, we have to deal with the layer 4 checksum adjustment using protocol specific code. This patch adds support for TCP, UDP and ICMPv6, since they include the pseudoheader in the layer 4 checksum calculation. ICMP doesn't, so we can skip it. Signed-off-by: -
Liping Zhang authored
Otherwise, if fib lookup fail, *dest will be filled with garbage value, so reverse path filtering will not work properly: # nft add rule x prerouting fib saddr oif eq 0 drop Fixes: f6d0cbcf ("netfilter: nf_tables: add fib expression") Signed-off-by:
-
Liping Zhang authored
Acctually ntohl and htonl are identical, so this doesn't affect anything, but it is conceptually wrong. Signed-off-by:
-
Florian Westphal authored
instead of allocating each xt_counter individually, allocate 4k chunks and then use these for counter allocation requests. This should speed up rule evaluation by increasing data locality, also speeds up ruleset loading because we reduce calls to the percpu allocator. As Eric points out we can't use PAGE_SIZE, page_allocator would fail on arches with 64k page size. Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Florian Westphal authored
Keeps some noise away from a followup patch. Signed-off-by:
-
Florian Westphal authored
On SMP we overload the packet counter (unsigned long) to contain percpu offset. Hide this from callers and pass xt_counters address instead. Preparation patch to allocate the percpu counters in page-sized batch chunks. Signed-off-by:
-
Aaron Conole authored
This is to facilitate converting from a singly-linked list to an array of elements. Signed-off-by:
Aaron Conole <aconole@bytheb.org> Signed-off-by:
-
Aaron Conole authored
During nfhook traversal we only need a very small subset of nf_hook_ops members. We need: - next element - hook function to call - hook function priv argument Bridge netfilter also needs 'thresh'; can be obtained via ->orig_ops. nf_hook_entry struct is now 32 bytes on x86_64. A followup patch will turn the run-time list into an array that only stores hook functions plus their priv arguments, eliminating the ->next element. Suggested-by:
-
Aaron Conole authored
This allows easier future refactoring. Signed-off-by:
-
Florian Westphal authored
nf_defrag modules for ipv4 and ipv6 export an empty stub function. Any module that needs the defragmentation hooks registered simply 'calls' this empty function to create a phony module dependency -- modprobe will then load the defrag module too. This extends netfilter ipv4/ipv6 defragmentation modules to delay the hook registration until the functionality is requested within a network namespace instead of module load time for all namespaces. Hooks are only un-registered on module unload or when a namespace that used such defrag functionality exits. We have to use struct net for this as the register hooks can be called before netns initialization here from the ipv4/ipv6 conntrack module init path. There is no unregister functionality support, defrag will always be active once it was requested inside a net namespace. The reason is that defrag has impact on nft and iptables rulesets (without defrag we might see framents). Signed-off-by:
-
- 04 Dec, 2016 9 commits
-
-
Florian Westphal authored
This switch (default on) can be used to disable automatic registration of connection tracking functionality in newly created network namespaces. This means that when net namespace goes down (or the tracker protocol module is unloaded) we *might* have to unregister the hooks. We can either add another per-netns variable that tells if the hooks got registered by default, or, alternatively, just call the protocol _put() function and have the callee deal with a possible 'extra' put() operation that doesn't pair with a get() one. This uses the latter approach, i.e. a put() without a get has no effect. Conntrack is still enabled automatically regardless of the new sysctl setting if the new net namespace requires connection tracking, e.g. when NAT rules are created. Signed-off-by:
-
Florian Westphal authored
This makes use of nf_ct_netns_get/put added in previous patch. We add get/put functions to nf_conntrack_l3proto structure, ipv4 and ipv6 then implement use-count to track how many users (nft or xtables modules) have a dependency on ipv4 and/or ipv6 connection tracking functionality. When count reaches zero, the hooks are unregistered. This delays activation of connection tracking inside a namespace until stateful firewall rule or nat rule gets added. This patch breaks backwards compatibility in the sense that connection tracking won't be active anymore when the protocol tracker module is loaded. This breaks e.g. setups that ctnetlink for flow accounting and the like, without any '-m conntrack' packet filter rules. Followup patch restores old behavour and makes new delayed scheme optional via sysctl. Signed-off-by:
-
Florian Westphal authored
so that conntrack core will add the needed hooks in this namespace. Signed-off-by:
-
Florian Westphal authored
MASQUERADE, S/DNAT and REDIRECT already call functions that depend on the conntrack module. However, since the conntrack hooks are now registered in a lazy fashion (i.e., only when needed) a symbol reference is not enough. Thus, when something is added to a nat table, make sure that it will see packets by calling nf_ct_netns_get() which will register the conntrack hooks in the current netns. An alternative would be to add these dependencies to the NAT table. However, that has problems when using non-modular builds -- we might register e.g. ipv6 conntrack before its initcall has run, leading to NULL deref crashes since its per-netns storage has not yet been allocated. Adding the dependency in the modules instead has the advantage that nat table also does not register its hooks until rules are added. Signed-off-by:
-
Florian Westphal authored
currently aliased to try_module_get/_put. Will be changed in next patch when we add functions to make use of ->net argument to store usercount per l3proto tracker. This is needed to avoid registering the conntrack hooks in all netns and later only enable connection tracking in those that need conntrack. Signed-off-by:
-
Florian Westphal authored
since adf05168 ("netfilter: remove ip_conntrack* sysctl compat code") the only user (ipv4 tracker) sets this to an empty stub function. After this change nf_ct_l3proto_pernet_register() is also empty, but this will change in a followup patch to add conditional register of the hooks. Signed-off-by:
-
Davide Caratti authored
CONFIG_NF_CT_PROTO_UDPLITE is no more a tristate. When set to y, connection tracking support for UDPlite protocol is built-in into nf_conntrack.ko. footprint test: $ ls -l net/netfilter/nf_conntrack{_proto_udplite,}.ko \ net/ipv4/netfilter/nf_conntrack_ipv4.ko \ net/ipv6/netfilter/nf_conntrack_ipv6.ko (builtin)|| udplite| ipv4 | ipv6 |nf_conntrack ---------++--------+--------+--------+-------------- none || 432538 | 828755 | 828676 | 6141434 UDPlite || - | 829649 | 829362 | 6498204 Signed-off-by: -
Davide Caratti authored
CONFIG_NF_CT_PROTO_SCTP is no more a tristate. When set to y, connection tracking support for SCTP protocol is built-in into nf_conntrack.ko. footprint test: $ ls -l net/netfilter/nf_conntrack{_proto_sctp,}.ko \ net/ipv4/netfilter/nf_conntrack_ipv4.ko \ net/ipv6/netfilter/nf_conntrack_ipv6.ko (builtin)|| sctp | ipv4 | ipv6 | nf_conntrack ---------++--------+--------+--------+-------------- none || 498243 | 828755 | 828676 | 6141434 SCTP || - | 829254 | 829175 | 6547872 Signed-off-by: -
Davide Caratti authored
CONFIG_NF_CT_PROTO_DCCP is no more a tristate. When set to y, connection tracking support for DCCP protocol is built-in into nf_conntrack.ko. footprint test: $ ls -l net/netfilter/nf_conntrack{_proto_dccp,}.ko \ net/ipv4/netfilter/nf_conntrack_ipv4.ko \ net/ipv6/netfilter/nf_conntrack_ipv6.ko (builtin)|| dccp | ipv4 | ipv6 | nf_conntrack ---------++--------+--------+--------+-------------- none || 469140 | 828755 | 828676 | 6141434 DCCP || - | 830566 | 829935 | 6533526 Signed-off-by:
-
