- 17 Mar, 2006 9 commits
-
-
Michael Ellerman authored
My patch (d7a5b2ff) to always panic if lmb_alloc() fails is broken because it checks alloc < 0, but should be checking alloc == 0. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Christoph Hellwig authored
The spidernet drivers uses request_firmware() and thus needs to select FW_LOADER. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Grant Likely authored
Needed due to changes in ppc_sys.c. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Adrian Cox authored
While adding USB support to an MV64360 based board this week, I discovered that all MV64x60 boards in the kernel have platform_notify functions marked with __init. This causes an oops if a device is added after boot. The patch below removes the __init markers. I do not have all these boards to test on, but the change seems very unlikely to break anything else. Signed-off-by: Adrian Cox <adrian@humboldt.co.uk> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Olaf Hering authored
Dump a stream of rawbytes with a new 'dr' command. Produces less output and it is simpler to feed the output to scripts. Also, dr has no dumpsize limits. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Christoph Hellwig authored
Typical use for of_find_node_by_name and of_find_node_by_type is to iterate over all nodes of a given type/name. Add a helper macro to do that (in spirit of the list_for_each* macros). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Eric Sesterhenn authored
This converts arch/ppc to kzalloc usage. Crosscompile tested with allyesconfig. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
At present, the powerpc pmd_bad() and pud_bad() macros return false unless the given pmd or pud is zero. This patch makes these tests more thorough, checking if the given pmd or pud looks like a plausible pte page or pmd page pointer respectively. This can result in helpful error messages when messing with the pagetable code. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
-
- 16 Mar, 2006 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge: powerpc: update defconfigs [PATCH] powerpc: properly configure DDR/P5IOC children devs [PATCH] powerpc: remove duplicate EXPORT_SYMBOLS [PATCH] powerpc: RTC memory corruption [PATCH] powerpc: enable NAP only on cpus who support it to avoid memory corruption [PATCH] powerpc: Clarify wording for CRASH_DUMP Kconfig option [PATCH] powerpc/64: enable CONFIG_BLK_DEV_SL82C105 [PATCH] powerpc: correct cacheflush loop in zImage powerpc: Fix problem with time going backwards powerpc: Disallow lparcfg being a module
-
Paul Mackerras authored
Signed-off-by: Paul Mackerras <paulus@samba.org>
-
John Rose authored
The dynamic add path for PCI Host Bridges can fail to configure children adapters under P5IOC controllers. It fails to properly fixup bus/device resources, and it fails to properly enable EEH. Both of these steps need to occur before any children devices are enabled in pci_bus_add_devices(). Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Olaf Hering authored
remove warnings when building a 64bit kernel. smp_call_function triggers also with 32bit kernel. WARNING: vmlinux: duplicate symbol 'smp_call_function' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:164:EXPORT_SYMBOL(smp_call_function); arch/powerpc/kernel/smp.c:300:EXPORT_SYMBOL(smp_call_function); WARNING: vmlinux: duplicate symbol 'ioremap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:113:EXPORT_SYMBOL(ioremap); arch/powerpc/mm/pgtable_64.c:321:EXPORT_SYMBOL(ioremap); WARNING: vmlinux: duplicate symbol '__ioremap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:117:EXPORT_SYMBOL(__ioremap); arch/powerpc/mm/pgtable_64.c:322:EXPORT_SYMBOL(__ioremap); WARNING: vmlinux: duplicate symbol 'iounmap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:118:EXPORT_SYMBOL(iounmap); arch/powerpc/mm/pgtable_64.c:323:EXPORT_SYMBOL(iounmap); Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Michael Neuling authored
We should be memset'ing the data we are pointing to, not the pointer itself. This is in an error path so we probably don't hit it much. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
This patch fixes incorrect setting of powersave_nap to 1 on all PowerMacs, potentially causing memory corruption on some models. This bug was introuced by me during the 32/64 bits merge. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
The wording of the CRASH_DUMP Kconfig option is not very clear. It gives you a kernel that can be used _as_ the kdump kernel, not a kernel that can boot into a kdump kernel. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Olaf Hering authored
Enable the onboard IDE driver for p610, p615 and p630. They have the CD connected to this card. All other RS/6000 systems with this controller have no connectors and dont need this option. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Olaf Hering authored
Correct the loop for cacheflush. No idea where I copied the code from, but the original does not work correct. Maybe the flush is not needed. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
The recent changes to keep gettimeofday in sync with xtime had the side effect that it was occasionally possible for the time reported by gettimeofday to go back by a microsecond. There were two reasons: (1) when we recalculated the offsets used by gettimeofday every 2^31 timebase ticks, we lost an accumulated fractional microsecond, and (2) because the update is done some time after the notional start of jiffy, if ntp is slowing the clock, it is possible to see time go backwards when the timebase factor gets reduced. This fixes it by (a) slowing the gettimeofday clock by about 1us in 2^31 timebase ticks (a factor of less than 1 in 3.7 million), and (b) adjusting the timebase offsets in the rare case that the gettimeofday result could possibly go backwards (i.e. when ntp is slowing the clock and the timer interrupt is late). In this case the adjustment will reduce to zero eventually because of (a). Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3362/1: [cleanup] - duplicate decleration of mem_fclk_21285 [ARM] 3365/1: [cleanup] header for compat.c exported functions [ARM] 3364/1: [cleanup] warning fix - definitions for enable_hlt and disable_hlt [ARM] 3363/1: [cleanup] process.c - fix warnings [ARM] 3358/1: [S3C2410] add missing SPI DMA resources [ARM] 3357/1: enable frontlight on collie [ARM] Fix "thead" typo
-
Al Viro authored
This fixes not one, but _two_, silly (but admittedly hard to hit) bugs in the ext2 filesystem "readdir()" function. It also cleans up the code to avoid the unnecessary goto mess. The bugs were related to re-valiating the f_pos value after somebody had either done an "lseek()" on the directory to an invalid offset, or when the offset had become invalid due to a file being unlinked in the directory. The code would not only set the f_version too eagerly, it would also not update f_pos appropriately for when the offset fixup took place. When that happened, we'd occasionally subsequently fail the readdir() even when we shouldn't (no real harm done, but an ugly printk, and obviously you would end up not necessarily seeing all entries). Thanks to Masoud Sharbiani <masouds@google.com> who noticed the problem and had a test-case for it, and also fixed up a thinko in the first version of this patch. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Masoud Sharbiani <masouds@google.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 15 Mar, 2006 14 commits
-
-
Ben Dooks authored
Patch from Ben Dooks arch/arm/kernel/setup.c declares mem_fclk_21285 when this is already declared in include/asm-arm/system.h Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Ben Dooks authored
Patch from Ben Dooks arch/arm/kernel/compat.c exports two functions, convert_to_tag_list and squash_mem_tags which are not defined in any header files, and not used outside arch/arm/kernel. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Ben Dooks authored
Patch from Ben Dooks The enable_hlt and disable_hlt should be declared in include/asm/setup.h. This fixes sparse errors from arch/arm/kernel/process.c Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Ben Dooks authored
Patch from Ben Dooks Fix the following warnings from sparse: arch/arm/kernel/process.c:86:6: warning: symbol 'default_idle' was not declared. Should it be static? arch/arm/kernel/process.c:378:5: warning: symbol 'dump_fpu' was not declared. Should it be static? Include <linux/elfcore.h> for dump_fpu() decleration, and make default_idle() static as it is not used outside the file. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Adrian Bunk authored
The Coverity checker spotted the following bug in dup_namespace(): <-- snip --> if (!new_ns->root) { up_write(&namespace_sem); kfree(new_ns); goto out; } ... out: return new_ns; <-- snip --> Callers expect a non-NULL result to not be freed. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Albrecht Dreß authored
Patch from Albrecht Dre Add DMA resources to s3c2410 spi platform devices - dma_(alloc|free)_coherent should now work as expected. Signed-off-by: Albrecht Dre <albrecht.dress@lios-tech.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Pavel Machek authored
Patch from Pavel Machek Enable frontlight during collie bootup, so that display is actually readable in anything other than bright sunlight. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Christoph Lameter authored
It seems that setting scheduling policy and priorities is also the kind of thing that might be performed in apps that also use the NUMA API, so it would seem consistent to use CAP_SYS_NICE for NUMA also. So use CAP_SYS_NICE for controlling migration permissions. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Christoph Lameter authored
Update the documentation for page migration. - Fix up bits and pieces in cpusets.txt - Rework text in vm/page-migration to be clearer and reflect the final version of page migration in 2.6.16. Mention Andi Kleen's numactl package that contains user space tools for page migration via libnuma. Add reference to numa_maps and to the manpage in numactl. - Add todo list for outstanding issues Signed-off-by: Christoph Lameter <clameter@sgi.com> Acked-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Christoph Lameter authored
page migration currently simply retries a couple of times if try_to_unmap() fails without inspecting the return code. However, SWAP_FAIL indicates that the page is in a vma that has the VM_LOCKED flag set (if ignore_refs ==1). We can check for that return code and avoid retrying the migration. migrate_page_remove_references() now needs to return a reason why the failure occured. So switch migrate_page_remove_references to use -Exx style error messages. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Smith authored
It seems this patch got dropped (it was in addition to the `s390: improve response code handling in chsc_enable_facility()' patch). Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
git://oss.sgi.com:8090/oss/git/rc-fixesLinus Torvalds authored
* git://oss.sgi.com:8090/oss/git/rc-fixes: Fix a direct I/O locking issue revealed by the new mutex code.
-
Nathan Scott authored
Affects only XFS (i.e. DIO_OWN_LOCKING case) - currently it is not possible to get i_mutex locking correct when using DIO_OWN direct I/O locking in a filesystem due to indeterminism in the possible return code/lock/unlock combinations. This can cause a direct read to attempt a double i_mutex unlock inside XFS. We're now ensuring __blockdev_direct_IO always exits with the inode i_mutex (still) held for a direct reader. Tested with the three different locking modes (via direct block device access, ext3 and XFS) - both reading and writing; cannot find any regressions resulting from this change, and it clearly fixes the mutex_unlock warning originally reported here: http://marc.theaimsgroup.com/?l=linux-kernel&m=114189068126253&w=2Signed-off-by: Nathan Scott <nathans@sgi.com> Acked-by: Christoph Hellwig <hch@lst.de>
-
- 14 Mar, 2006 5 commits
-
-
Dave Kleikamp authored
This fixes a race where lsn could be cleared before taking the lock Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] zfcp: fix device registration issues [SCSI] scsi_transport_fc: fix FC_HOST_NUM_ATTRS [SCSI] scsi: aha152x pcmcia driver needs spi transport [SCSI] zfcp: correctly set this_id for hosts [SCSI] Add Brownie to blacklist
-
Maneesh Soni authored
lapic_shutdown() re-enables interrupts which is un-desirable for panic case, so use local_irq_save() and local_irq_restore() to keep the irqs disabled for kexec on panic case, and close a possible race window while kdump shutdown as shown in this stack trace -- BUG: spinlock lockup on CPU#1, bash/4396, c52781a0 [<c01c1870>] _raw_spin_lock+0xb7/0xd2 [<c029e148>] _spin_lock+0x6/0x8 [<c011b33f>] scheduler_tick+0xe7/0x328 [<c0128a7c>] update_process_times+0x51/0x5d [<c0114592>] smp_apic_timer_interrupt+0x4f/0x58 [<c01141ff>] lapic_shutdown+0x76/0x7e [<c0104d7c>] apic_timer_interrupt+0x1c/0x30 [<c01141ff>] lapic_shutdown+0x76/0x7e [<c0116659>] machine_crash_shutdown+0x83/0xaa [<c013cc36>] crash_kexec+0xc1/0xe3 [<c029e148>] _spin_lock+0x6/0x8 [<c013cc22>] crash_kexec+0xad/0xe3 [<c0215280>] __handle_sysrq+0x84/0xfd [<c018d937>] write_sysrq_trigger+0x2c/0x35 [<c015e47b>] vfs_write+0xa2/0x13b [<c015ea73>] sys_write+0x3b/0x64 [<c0103c69>] syscall_call+0x7/0xb Signed-off-by: Maneesh Soni <maneesh@in.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
This reverts commit c33d4568. Andrew Clayton and Hugh Dickins report that it's broken for them and causes strange page table and slab corruption, and spontaneous reboots. Let's get it right next time. Cc: Andrew Clayton <andrew@rootshell.co.uk> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Dave Peterson authored
- Disable the EDAC sysfs code. The sysfs interface that EDAC presents to user space needs more thought, and is likely to change substantially. Therefore disable it for now so users don't start depending on it in its current form. - Disable the default behavior of calling panic() when an uncorrectible error is detected (since for now, there is no sysfs interface that allows the user to configure this behavior). Signed-off-by: David S. Peterson <dsp@llnl.gov> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-