- 03 Apr, 2014 36 commits
-
-
Thomas Petazzoni authored
commit e3a8786c upstream. Commit 5445eaf3 ('mvneta: Try to fix mvneta when compiled as module') fixed the mvneta driver to make it work properly when loaded as a module in SGMII configuration, which was tested successful by the author on the Armada XP OpenBlocks AX3, which uses SGMII. However, it turns out that the Armada XP GP, which uses RGMII, is affected by a similar problem: its SERDES configuration is lost when mvneta is loaded as a module, because this configuration is set by the bootloader, and then lost because the clock is gated by the clock framework until the mvneta driver is loaded again and the clock is re-enabled. However, it turns out that for the RGMII case, setting the SERDES configuration is not sufficient: the PCS enable bit in the MVNETA_GMAC_CTRL_2 register must also be set, like in the SGMII configuration. Therefore, this commit reworks the SGMII/RGMII initialization: the only difference between the two now is a different SERDES configuration, all the rest is identical. In detail, to achieve this, the commit: * Renames MVNETA_SGMII_SERDES_CFG to MVNETA_SERDES_CFG because it is not specific to SGMII, but also used on RGMII configurations. * Adds a MVNETA_RGMII_SERDES_PROTO definition, that must be used as the MVNETA_SERDES_CFG value in RGMII configurations. * Removes the mvneta_gmac_rgmii_set() and mvneta_port_sgmii_config() functions, and instead directly do the SGMII/RGMII configuration in mvneta_port_up(), from where those functions where called. It is worth mentioning that mvneta_gmac_rgmii_set() had an 'enable' parameter that was always passed as '1', so it was pretty useless. * Reworks the mvneta_port_up() function to set the MVNETA_SERDES_CFG register to the appropriate value depending on the RGMII vs. SGMII configuration. It also unconditionally set the PCS_ENABLE bit (was already done for SGMII, but is now also needed for RGMII), and sets the PORT_RGMII bit (which was already done for both SGMII and RGMII). This commit was successfully tested with mvneta compiled as a module, on both the OpenBlocks AX3 (SGMII configuration) and the Armada XP GP (RGMII configuration). Reported-by:
Steve McIntyre <steve@einval.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Thomas Petazzoni authored
commit a79121d3 upstream. Bit 3 of the MVNETA_GMAC_CTRL_2 is actually used to enable the PCS, not the PSC: there was a typo in the name of the define, which this commit fixes. Signed-off-by:
-
Al Viro authored
commit e825196d upstream. In all callchains leading to prepend_name(), the value left in *buflen is eventually discarded unused if prepend_name() has returned a negative. So we are free to do what prepend() does, and subtract from *buflen *before* checking for underflow (which turns into checking the sign of subtraction result, of course). Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Artem Fetishev authored
commit 825600c0 upstream. On x86 uniprocessor systems topology_physical_package_id() returns -1 which causes rapl_cpu_prepare() to leave rapl_pmu variable uninitialized which leads to GPF in rapl_pmu_init(). See arch/x86/kernel/cpu/perf_event_intel_rapl.c. It turns out that physical_package_id and core_id can actually be retreived for uniprocessor systems too. Enabling them also fixes rapl_pmu code. Signed-off-by:
Artem Fetishev <artem_fetishev@epam.com> Cc: Stephane Eranian <eranian@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Daniel Vetter authored
commit 8ee661b5 upstream. It apparently blows up on some machines. This functionally reverts commit 828c7908 Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Wed Oct 16 09:21:30 2013 -0700 drm/i915: Disable GGTT PTEs on GEN6+ suspend Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64841Reported-and-Tested-by:
Brad Jackson <bjackson0971@gmail.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Todd Previte <tprevite@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Scott Wood authored
commit 5f12c5ec upstream. Fixes a build break due to the undeclared use of irq_of_parse_and_map() and of_iomap(). This build break was apparently introduced while the driver was unbuildable due to the bug fixed by 62c19c9d ("i2c: Remove usage of orphaned symbol OF_I2C"). When 62c19c was added in v3.14-rc7, the driver was enabled again, breaking the powerpc mpc85xx_defconfig and mpc85xx_smp_defconfig. 62c19c is marked for stable, so this should go there as well. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
David Vrabel authored
commit 5926f87f upstream. This reverts commit a9c8e4be. PTEs in Xen PV guests must contain machine addresses if _PAGE_PRESENT is set and pseudo-physical addresses is _PAGE_PRESENT is clear. This is because during a domain save/restore (migration) the page table entries are "canonicalised" and uncanonicalised". i.e., MFNs are converted to PFNs during domain save so that on a restore the page table entries may be rewritten with the new MFNs on the destination. This canonicalisation is only done for PTEs that are present. This change resulted in writing PTEs with MFNs if _PAGE_PROTNONE (or _PAGE_NUMA) was set but _PAGE_PRESENT was clear. These PTEs would be migrated as-is which would result in unexpected behaviour in the destination domain. Either a) the MFN would be translated to the wrong PFN/page; b) setting the _PAGE_PRESENT bit would clear the PTE because the MFN is no longer owned by the domain; or c) the present bit would not get set. Symptoms include "Bad page" reports when munmapping after migrating a domain. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Wei Liu authored
commit 09ed3d5b upstream. Xen balloon driver will update ballooned out pages' P2M entries to point to scratch page for PV guests. In 24f69373 ("xen/balloon: don't alloc page while non-preemptible", kmap_flush_unused was moved after updating P2M table. In that case for 32 bit PV guest we might end up with P2M X -----> S (S is mfn of balloon scratch page) M2P Y -----> X (Y is mfn in persistent kmap entry) kmap_flush_unused() iterates through all the PTEs in the kmap address space, using pte_to_page() to obtain the page. If the p2m and the m2p are inconsistent the incorrect page is returned. This will clear page->address on the wrong page which may cause subsequent oopses if that page is currently kmap'ed. Move the flush back between get_page and __set_phys_to_machine to fix this. Signed-off-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Hans de Goede authored
commit 6797b39e upstream. The cypress PS/2 trackpad models supported by the cypress_ps2 driver emulate BTN_RIGHT events in firmware based on the finger position, as part of this no motion events are sent when the finger is in the button area. The INPUT_PROP_BUTTONPAD property is there to indicate to userspace that BTN_RIGHT events should be emulated in userspace, which is not necessary in this case. When INPUT_PROP_BUTTONPAD is advertised userspace will wait for a motion event before propagating the button event higher up the stack, as it needs current abs x + y data for its BTN_RIGHT emulation. Since in the cypress_ps2 pads don't report motion events in the button area, this means that clicks in the button area end up being ignored, so INPUT_PROP_BUTTONPAD actually causes problems for these touchpads, and removing it fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76341Reported-by:
Adam Williamson <awilliam@redhat.com> Tested-by:
Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Hans de Goede authored
commit 8a0435d9 upstream. This extends Benjamin Tissoires manual min/max quirk table with support for the ThinkPad X240. Signed-off-by:
-
Benjamin Tissoires authored
commit 421e08c4 upstream. The new Lenovo Haswell series (-40's) contains a new Synaptics touchpad. However, these new Synaptics devices report bad axis ranges. Under Windows, it is not a problem because the Windows driver uses RMI4 over SMBus to talk to the device. Under Linux, we are using the PS/2 fallback interface and it occurs the reported ranges are wrong. Of course, it would be too easy to have only one range for the whole series, each touchpad seems to be calibrated in a different way. We can not use SMBus to get the actual range because I suspect the firmware will switch into the SMBus mode and stop talking through PS/2 (this is the case for hybrid HID over I2C / PS/2 Synaptics touchpads). So as a temporary solution (until RMI4 land into upstream), start a new list of quirks with the min/max manually set. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Dmitry Torokhov authored
commit e4dbedc7 upstream. We should not be using static variable mousedev_mix in methods that can be called before that singleton gets assigned. While at it let's add open and close methods to mousedev structure so that we do not need to test if we are dealing with multiplexor or normal device and simply call appropriate method directly. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=71551Reported-by:
GiulioDP <depasquale.giulio@gmail.com> Tested-by:
-
Theodore Ts'o authored
commit 00a1a053 upstream. Use cmpxchg() to atomically set i_flags instead of clearing out the S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the EXT4_IMMUTABLE_FL, EXT4_APPEND_FL flags, since this opens up a race where an immutable file has the immutable flag cleared for a brief window of time. Reported-by:
John Sullivan <jsrhbz@kanargh.force9.co.uk> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Martin Schwidefsky authored
commit ca5de58b upstream. With git commit 79c74ecb "s390/time,vdso: convert to the new update_vsyscall interface" the new update_vsyscall function already does the sum of xtime and wall_to_monotonic. The old update_vsyscall function only copied the wall_to_monotonic offset. The vdso code needs to be modified to take this into consideration. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Ping Cheng authored
commit b5fd2a3e upstream. Two tablets in this series support both pen and touch. One (Intuos S) only supports pen. This patch also updates the driver to process wireless devices that do not support touch interface. Tested-by:
Jason Gerecke <killertofu@gmail.com> Acked-by:
Chris Bagwell <chris@cnpbagwell.com> Signed-off-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
-
Michal Kubecek authored
commit 2a971354 upstream. If a fwmark is passed to ip_vs_conn_new(), it is passed in vaddr, not daddr. Therefore we should set AF to AF_UNSPEC in vaddr assignment (like we do in ip_vs_ct_in_get()), otherwise we may copy only first 4 bytes of an IPv6 address into cp->daddr. Signed-off-by:
Bogdano Arendartchuk <barendartchuk@suse.com> Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
David Howells authored
commit 7026f192 upstream. When FS-Cache allocates an object, the following sequence of events can occur: -->fscache_alloc_object() -->cachefiles_alloc_object() [via cache->ops->alloc_object] <--[returns new object] -->fscache_attach_object() <--[failed] -->cachefiles_put_object() [via cache->ops->put_object] -->fscache_object_destroy() -->fscache_objlist_remove() -->rb_erase() to remove the object from fscache_object_list. resulting in a crash in the rbtree code. The problem is that the object is only added to fscache_object_list on the success path of fscache_attach_object() where it calls fscache_objlist_add(). So if fscache_attach_object() fails, the object won't have been added to the objlist rbtree. We do, however, unconditionally try to remove the object from the tree. Thanks to NeilBrown for finding this and suggesting this solution. Reported-by:
NeilBrown <neilb@suse.de> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
-
Dongmao Zhang authored
commit ece35848 upstream. The recovery time for a failed node was taking a long time because the failed node could not perform the full shutdown process. Removing the linger time speeds this up. The dlm does not care what happens to messages to or from the failed node. Signed-off-by:
Dongmao Zhang <dmzhang@suse.com> Signed-off-by:
David Teigland <teigland@redhat.com> Signed-off-by:
-
Andy Adamson authored
commit f9c96fcc upstream. Fix a dynamic session slot leak where a slot is preallocated and I/O is resent through the MDS. Signed-off-by:
Andy Adamson <andros@netapp.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Jeff Layton authored
commit 4db72b40 upstream. If the setting of NFS_INO_INVALIDATING gets reordered to before the clearing of NFS_INO_INVALID_DATA, then another task may hit a race window where both appear to be clear, even though the inode's pages are still in need of invalidation. Fix this by adding the appropriate memory barriers. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit 17dfeb91 upstream. Commit d529ef83 (NFS: fix the handling of NFS_INO_INVALID_DATA flag in nfs_revalidate_mapping) introduces a potential race, since it doesn't test the value of nfsi->cache_validity and set the bitlock in nfsi->flags atomically. Signed-off-by:
-
Jeff Layton authored
commit d529ef83 upstream. There is a possible race in how the nfs_invalidate_mapping function is handled. Currently, we go and invalidate the pages in the file and then clear NFS_INO_INVALID_DATA. The problem is that it's possible for a stale page to creep into the mapping after the page was invalidated (i.e., via readahead). If another writer comes along and sets the flag after that happens but before invalidate_inode_pages2 returns then we could clear the flag without the cache having been properly invalidated. So, we must clear the flag first and then invalidate the pages. Doing this however, opens another race: It's possible to have two concurrent read() calls that end up in nfs_revalidate_mapping at the same time. The first one clears the NFS_INO_INVALID_DATA flag and then goes to call nfs_invalidate_mapping. Just before calling that though, the other task races in, checks the flag and finds it cleared. At that point, it trusts that the mapping is good and gets the lock on the page, allowing the read() to be satisfied from the cache even though the data is no longer valid. These effects are easily manifested by running diotest3 from the LTP test suite on NFS. That program does a series of DIO writes and buffered reads. The operations are serialized and page-aligned but the existing code fails the test since it occasionally allows a read to come out of the cache incorrectly. While mixing direct and buffered I/O isn't recommended, I believe it's possible to hit this in other ways that just use buffered I/O, though that situation is much harder to reproduce. The problem is that the checking/clearing of that flag and the invalidation of the mapping really need to be atomic. Fix this by serializing concurrent invalidations with a bitlock. At the same time, we also need to allow other places that check NFS_INO_INVALID_DATA to check whether we might be in the middle of invalidating the file, so fix up a couple of places that do that to look for the new NFS_INO_INVALIDATING flag. Doing this requires us to be careful not to set the bitlock unnecessarily, so this code only does that if it believes it will be doing an invalidation. Signed-off-by:
-
Weston Andros Adamson authored
commit 471252cd upstream. cond_resched_lock(cinfo->lock) is called everywhere else while holding the cinfo->lock spinlock. Not holding this lock while calling transfer_commit_list in filelayout_recover_commit_reqs causes the BUG below. It's true that we can't hold this lock while calling pnfs_put_lseg, because that might try to lock the inode lock - which might be the same lock as cinfo->lock. To reproduce, mount a 2 DS pynfs server and run an O_DIRECT command that crosses a stripe boundary and is not page aligned, such as: dd if=/dev/zero of=/mnt/f bs=17000 count=1 oflag=direct BUG: sleeping function called from invalid context at linux/fs/nfs/nfs4filelayout.c:1161 in_atomic(): 0, irqs_disabled(): 0, pid: 27, name: kworker/0:1 2 locks held by kworker/0:1/27: #0: (events){.+.+.+}, at: [<ffffffff810501d7>] process_one_work+0x175/0x3a5 #1: ((&dreq->work)){+.+...}, at: [<ffffffff810501d7>] process_one_work+0x175/0x3a5 CPU: 0 PID: 27 Comm: kworker/0:1 Not tainted 3.13.0-rc3-branch-dros_testing+ #21 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 Workqueue: events nfs_direct_write_schedule_work [nfs] 0000000000000000 ffff88007a39bbb8 ffffffff81491256 ffff88007b87a130 ffff88007a39bbd8 ffffffff8105f103 ffff880079614000 ffff880079617d40 ffff88007a39bc20 ffffffffa011603e ffff880078988b98 0000000000000000 Call Trace: [<ffffffff81491256>] dump_stack+0x4d/0x66 [<ffffffff8105f103>] __might_sleep+0x100/0x105 [<ffffffffa011603e>] transfer_commit_list+0x94/0xf1 [nfs_layout_nfsv41_files] [<ffffffffa01160d6>] filelayout_recover_commit_reqs+0x3b/0x68 [nfs_layout_nfsv41_files] [<ffffffffa00ba53a>] nfs_direct_write_reschedule+0x9f/0x1d6 [nfs] [<ffffffff810705df>] ? mark_lock+0x1df/0x224 [<ffffffff8106e617>] ? trace_hardirqs_off_caller+0x37/0xa4 [<ffffffff8106e691>] ? trace_hardirqs_off+0xd/0xf [<ffffffffa00ba8f8>] nfs_direct_write_schedule_work+0x9d/0xb7 [nfs] [<ffffffff810501d7>] ? process_one_work+0x175/0x3a5 [<ffffffff81050258>] process_one_work+0x1f6/0x3a5 [<ffffffff810501d7>] ? process_one_work+0x175/0x3a5 [<ffffffff8105187e>] worker_thread+0x149/0x1f5 [<ffffffff81051735>] ? rescuer_thread+0x28d/0x28d [<ffffffff81056d74>] kthread+0xd2/0xda [<ffffffff81056ca2>] ? __kthread_parkme+0x61/0x61 [<ffffffff8149e66c>] ret_from_fork+0x7c/0xb0 [<ffffffff81056ca2>] ? __kthread_parkme+0x61/0x61 Signed-off-by:
Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
-
Christoph Hellwig authored
commit 1f90ee27 upstream. i_dio_count is used to protect dio access against truncate. We want to make sure there are no dio reads pending either when doing a truncate. I suspect on plain NFS things might work even without this, but once we use a pnfs layout driver that access backing devices directly things will go bad without the proper synchronization. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
commit 2a009ec9 upstream. We need to have the I/O fully finished before telling the truncate code that we are done. Signed-off-by:
-
Christoph Hellwig authored
commit 9811cd57 upstream. nfs_file_direct_write only updates the inode size if it succeeded and returned the number of bytes written. But in the AIO case nfs_direct_wait turns the return value into -EIOCBQUEUED and we skip the size update. Instead the aio completion path should updated it, which this patch does. The implementation is a little hacky because there is no obvious way to find out we are called for a write in nfs_direct_complete. Signed-off-by:
-
Alexander Aring authored
commit a8c22754 upstream. The correct way to check on IPV6_ADDR_SCOPE_LINKLOCAL is to check with the ipv6_addr_src_scope function. Currently this can't be work, because ipv6_addr_scope returns a int with a mask of IPV6_ADDR_SCOPE_MASK (0x00f0U) and IPV6_ADDR_SCOPE_LINKLOCAL is 0x02. So the condition is always false. Signed-off-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
-
Trond Myklebust authored
commit f22e5edd upstream. Andy Adamson reports: The state manager is recovering expired state and recovery OPENs are being processed. If kswapd is pruning inodes at the same time, a deadlock can occur when kswapd calls evict_inode on an NFSv4.1 inode with a layout, and the resultant layoutreturn gets an error that the state mangager is to handle, causing the layoutreturn to wait on the (NFS client) cl_rpcwaitq. At the same time an open is waiting for the inode deletion to complete in __wait_on_freeing_inode. If the open is either the open called by the state manager, or an open from the same open owner that is holding the NFSv4 sequence id which causes the OPEN from the state manager to wait for the sequence id on the Seqid_waitqueue, then the state is deadlocked with kswapd. The fix is simply to have layoutreturn ignore all errors except NFS4ERR_DELAY. We already know that layouts are dropped on all server reboots, and that it has to be coded to deal with the "forgetful client model" that doesn't send layoutreturns. Reported-by:
-
Andy Adamson authored
commit c297c8b9 upstream. Otherwise RPCSEC_GSS_DESTROY messages are not sent. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Olaf Hering authored
commit f5d2b7c2 upstream. Documentation/fb/modedb.txt states that video=option should be considered a global option. But video_setup and fb_get_options are not coded that way. Instead its required to boot with video=driver:option to set a given option in drvier. This is cumbersome because it requires to know in advance which driver will be active for a given board/kernel. The following patch implements the documented catchall for the fbdev drivers. It is now possible to boot with video=XxY without the need to know the active driver in advance. The specific case it tries to fix is syslinux in the SUSE installer which offers a menu to set a display resolution. Right now this just appends the vga= option the kernel. But in addition to vga= it should be possible to pass a generic video=XxY for all framebuffer/drm drivers. With this change forcing a certain window size of VM displays is now much easier. Today the video= option is stored in a global fb_mode_option. But unfortunately only drm uses it. Note: this change introduces a small memleak if video=option is actually used because fb_mode_option is const. Most drivers use strsep to get to individual options. This could be fixed in a followup patch which always releases the option string in every caller of fb_get_options. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Toshi Kani authored
commit a85eba88 upstream. When ACPI SLIT table has an I/O locality (i.e. a locality unique to an I/O device), numa_set_distance() emits this warning message: NUMA: Warning: node ids are out of bound, from=-1 to=-1 distance=10 acpi_numa_slit_init() calls numa_set_distance() with pxm_to_node(), which assumes that all localities have been parsed with SRAT previously. SRAT does not list I/O localities, where as SLIT lists all localities including I/Os. Hence, pxm_to_node() returns NUMA_NO_NODE (-1) for an I/O locality. I/O localities are not supported and are ignored today, but emitting such warning message leads to unnecessary confusion. Change acpi_numa_slit_init() to avoid calling numa_set_distance() with NUMA_NO_NODE. Signed-off-by:
Toshi Kani <toshi.kani@hp.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Oliver Neukum authored
commit 16c0c4e1 upstream. The AVX2 implementation also uses BMI2 instructions, but doesn't test for their availability. The assumption that AVX2 and BMI2 always go together is false. Some Haswells have AVX2 but not BMI2. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jeff Mahoney authored
commit d0ce7b85 upstream. Commit 8116188f ("nouveau/acpi: hook up to the MXM method for mux switching.") broke the build on non-x86 architectures due to the new dependency on MXM and MXM being an x86 platform driver. It built previously since the vga switcheroo registration routines were zereod out on !X86. The code was built in but unused. This patch makes all of the DSM code depend on CONFIG_VGA_SWITCHEROO, allowing it to build on non-x86 and shrinking the module size as well. [rdunlap@infradead.org: fix build eror when VGA_SWITCHEROO is not enabled] Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
J. Bruce Fields authored
commit a3f432bf upstream. This check was added by Al Viro with d9e80b7d "nfs d_revalidate() is too trigger-happy with d_drop()", with the explanation that we don't want to remove the root of a disconnected tree, which will still be included on the s_anon list. But DCACHE_DISCONNECTED does *not* actually identify dentries that are disconnected from the dentry tree or hashed on s_anon. IS_ROOT() is the way to do that. Also add a comment from Al's commit to remind us why this check is there. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Reviewed-by:
-
David Howells authored
commit 57be4a78 upstream. struct x509_certificate needs struct tm declaring by #inclusion of linux/time.h prior to its definition. Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Josh Boyer <jwboyer@redhat.com> Signed-off-by:
-
Bockholdt Arne authored
commit 22e580d0 upstream. Corrected the MWAIT flag for C-State C6 on Intel Avoton/Rangeley processors. Signed-off-by:
Arne Bockholdt <linux-kernel@bockholdt.com> Acked-by:
Len Brown <len.brown@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
- 01 Apr, 2014 3 commits
-
-
Len Brown authored
commit fab04b22 upstream. Support the "Intel(R) Atom(TM) Processor C2000 Product Family", formerly code-named Avoton. It is based on the next generation Intel Atom processor architecture, formerly code-named Silvermont. Signed-off-by:
-
James Ralston authored
commit afc65924 upstream. This patch adds the SMBus Device IDs for the Intel Wildcat Point-LP PCH. Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
-
Takashi Iwai authored
commit 7fe30711 upstream. The current code for controlling mic mute LED in patch_sigmatel.c blindly assumes that there is a single capture switch. But, there can be multiple multiple ones, and each of them flips the state, ended up in an inconsistent state. For fixing this problem, this patch adds kcontrol to be passed to the hook function so that the callee can check which switch is being accessed. In stac_capture_led_hook(), the state is checked as a bitmask, and turns on the LED when all capture switches are off. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
- 31 Mar, 2014 1 commit
-
-
Jiri Slaby authored
-
