Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2022-05-13

1) Cleanups for the code behind the XFRM offload API. This is a
   preparation for the extension of the API for policy offload.
   From Leon Romanovsky.

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
  xfrm: drop not needed flags variable in XFRM offload struct
  net/mlx5e: Use XFRM state direction instead of flags
  netdevsim: rely on XFRM state direction instead of flags
  ixgbe: propagate XFRM offload state direction instead of flags
  xfrm: store and rely on direction to construct offload flags
  xfrm: rename xfrm_state_offload struct to allow reuse
  xfrm: delete not used number of external headers
  xfrm: free not used XFRM_ESP_NO_TRAILER flag
====================

Link: https://lore.kernel.org/r/20220513151218.4010119-1-steffen.klassert@secunet.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If CONFIG_PTP_1588_CLOCK=m and CONFIG_SFC_SIENA=y, the siena driver will fail to link:

drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_remove_channel':
ptp.c:(.text+0xa28): undefined reference to `ptp_clock_unregister'
drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_probe_channel':
ptp.c:(.text+0x13a0): undefined reference to `ptp_clock_register'
ptp.c:(.text+0x1470): undefined reference to `ptp_clock_unregister'
drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_pps_worker':
ptp.c:(.text+0x1d29): undefined reference to `ptp_clock_event'
drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_siena_ptp_get_ts_info':
ptp.c:(.text+0x301b): undefined reference to `ptp_clock_index'

To fix this build error, make SFC_SIENA depends on PTP_1588_CLOCK.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: d48523cb ("sfc: Copy shared files needed for Siena (part 2)")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220513012721.140871-1-renzhijie2@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Michael Chan says:

====================
bnxt_en: Updates for net-next

This small patchset updates the firmware interface, adds timestamping
support for all receive packets, and adds revised NVRAM package error
messages for ethtool and devlink.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of always returning -ENOPKG, decode the firmware error
code further when the HWRM_NVM_INSTALL_UPDATE firmware call fails.
Return a more suitable error code to userspace and log an error
in dmesg.

This is version 2 of the earlier patch that was reverted:

02acd399 ("bnxt_en: parse result field when NVRAM package install fails")

In this new version, if the call is made through devlink instead of
ethtool, we'll also set the error message in extack.

Link: https://lore.kernel.org/netdev/20220307141358.4d52462e@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add driver support to enable timestamping on all RX packets
that are received by the NIC. This capability can be requested
by the applications using SIOCSHWTSTAMP ioctl with filter type
HWTSTAMP_FILTER_ALL.

Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For correctness, we need to configure the packet filters for timestamping
during bnxt_open.  This way they are always configured after firmware
reset or chip reset.  We should not assume that the filters will always
be retained across resets.

This patch modifies the ioctl handler and always configures the PTP
filters in the bnxt_open() path.

Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The main changes are timestamp support for all RX packets and new PCIe
statistics.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This driver was using the TX IRQ handler to perform all TX completion
tasks. Under heavy TX network load, this can cause significant irqs-off
latencies (found to be in the hundreds of microseconds using ftrace).
This can cause other issues, such as overrunning serial UART FIFOs when
using high baud rates with limited UART FIFO sizes.

Switch to using a NAPI poll handler to perform the TX completion work
to get this out of hard IRQ context and avoid the IRQ latency impact.
A separate poll handler is used for TX and RX since they have separate
IRQs on this controller, so that the completion work for each of them
stays on the same CPU as the interrupt.

Testing on a Xilinx MPSoC ZU9EG platform using iperf3 from a Linux PC
through a switch at 1G link speed showed no significant change in TX or
RX throughput, with approximately 941 Mbps before and after. Hard IRQ
time in the TX throughput test was significantly reduced from 12% to
below 1% on the CPU handling TX interrupts, with total hard+soft IRQ CPU
usage dropping from about 56% down to 48%.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The axienet_start_xmit function was updating the tx_bd_tail variable
multiple times, with potential rollbacks on error or invalid
intermediate positions, even though this variable is also used in the
TX completion path. Use READ_ONCE where this variable is read and
WRITE_ONCE where it is written to make this update more atomic, and
move the write before the MMIO write to start the transfer, so it is
protected by that implicit write barrier.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

INET_MATCH() runs without holding a lock on the socket.

We probably need to annotate most reads.

This patch makes INET_MATCH() an inline function
to ease our changes.

v2:

We remove the 32bit version of it, as modern compilers
should generate the same code really, no need to
try to be smarter.

Also make 'struct net *net' the first argument.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rarely some of the test cases fail. Make the test more robust by increasing
the timeout of ping commands to 5 seconds.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Lukas Wunner says:

====================
Polling be gone on LAN95xx

Do away with link status polling on LAN95xx USB Ethernet
and rely on interrupts instead, thereby reducing bus traffic,
CPU overhead and improving interface bringup latency.

Link to v2:
https://lore.kernel.org/netdev/cover.1651574194.git.lukas@wunner.de/

Only change since v2:

* Patch [5/7]:
  * Drop call to __irq_enter_raw() which worked around a warning in
    generic_handle_domain_irq().  That warning is gone since
    792ea6a0 (queued on tip.git/irq/urgent).
    (Marc Zyngier, Thomas Gleixner)
====================

If reading the Interrupt Source Flag register fails with -ENODEV, then
the PHY has been hot-removed and the correct response is to bail out
instead of throwing a WARN splat and attempting to suspend the PHY.
The PHY should be stopped in due course anyway as the kernel
asynchronously tears down the device.

Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cache the interrupt mask to avoid re-reading it from the PHY upon every
interrupt.

This will simplify a subsequent commit which detects hot-removal in the
interrupt handler and bails out.

Analyzing and debugging PHY transactions also becomes simpler if such
redundant reads are avoided.

Last not least, interrupt overhead and latency is slightly improved.

Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Link status of SMSC LAN95xx chips is polled once per second, even though
they're capable of signaling PHY interrupts through the MAC layer.

Forward those interrupts to the PHY driver to avoid polling.  Benefits
are reduced bus traffic, reduced CPU overhead and quicker interface
bringup.

Polling was introduced in 2016 by commit d69d1694 ("usbnet:
smsc95xx: fix link detection for disabled autonegotiation").
Back then, the LAN95xx driver neglected to enable the ENERGYON interrupt,
hence couldn't detect link-up events when auto-negotiation was disabled.
The proper solution would have been to enable the ENERGYON interrupt
instead of polling.

Since then, PHY handling was moved from the LAN95xx driver to the SMSC
PHY driver with commit 05b35e7e ("smsc95xx: add phylib support").
That PHY driver is capable of link detection with auto-negotiation
disabled because it enables the ENERGYON interrupt.

Note that signaling interrupts through the MAC layer not only works with
the integrated PHY, but also with an external PHY, provided its
interrupt pin is attached to LAN95xx's nPHY_INT pin.

In the unlikely event that the interrupt pin of an external PHY is
attached to a GPIO of the SoC (or not connected at all), the driver can
be amended to retrieve the irq from the PHY's of_node.

To forward PHY interrupts to phylib, it is not sufficient to call
phy_mac_interrupt().  Instead, the PHY's interrupt handler needs to run
so that PHY interrupts are cleared.  That's because according to page
119 of the LAN950x datasheet, "The source of this interrupt is a level.
The interrupt persists until it is cleared in the PHY."

https://www.microchip.com/content/dam/mchp/documents/UNG/ProductDocuments/DataSheets/LAN950x-Data-Sheet-DS00001875D.pdf

Therefore, create an IRQ domain with a single IRQ for the PHY.  In the
future, the IRQ domain may be extended to support the 11 GPIOs on the
LAN95xx.

Normally the PHY interrupt should be masked until the PHY driver has
cleared it.  However masking requires a (sleeping) USB transaction and
interrupts are received in (non-sleepable) softirq context.  I decided
not to mask the interrupt at all (by using the dummy_irq_chip's noop
->irq_mask() callback):  The USB interrupt endpoint is polled in 1 msec
intervals and normally that's sufficient to wake the PHY driver's IRQ
thread and have it clear the interrupt.  If it does take longer, worst
thing that can happen is the IRQ thread is woken again.  No big deal.

Because PHY interrupts are now perpetually enabled, there's no need to
selectively enable them on suspend.  So remove all invocations of
smsc95xx_enable_phy_wakeup_interrupts().

In smsc95xx_resume(), move the call of phy_init_hw() before
usbnet_resume() (which restarts the status URB) to ensure that the PHY
is fully initialized when an interrupt is handled.

Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch> # from a PHY perspective
Cc: Andre Edich <andre.edich@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a PHY interrupt is signaled, the SMSC LAN95xx driver updates the
MAC full duplex mode and PHY flow control registers based on cached data
in struct phy_device:

  smsc95xx_status()                 # raises EVENT_LINK_RESET
    usbnet_deferred_kevent()
      smsc95xx_link_reset()         # uses cached data in phydev

Simultaneously, phylib polls link status once per second and updates
that cached data:

  phy_state_machine()
    phy_check_link_status()
      phy_read_status()
        lan87xx_read_status()
          genphy_read_status()      # updates cached data in phydev

If smsc95xx_link_reset() wins the race against genphy_read_status(),
the registers may be updated based on stale data.

E.g. if the link was previously down, phydev->duplex is set to
DUPLEX_UNKNOWN and that's what smsc95xx_link_reset() will use, even
though genphy_read_status() may update it to DUPLEX_FULL afterwards.

PHY interrupts are currently only enabled on suspend to trigger wakeup,
so the impact of the race is limited, but we're about to enable them
perpetually.

Avoid the race by delaying execution of smsc95xx_link_reset() until
phy_state_machine() has done its job and calls back via
smsc95xx_handle_link_change().

Signaling EVENT_LINK_RESET on wakeup is not necessary because phylib
picks up link status changes through polling.  So drop the declaration
of a ->link_reset() callback.

Note that the semicolon on a line by itself added in smsc95xx_status()
is a placeholder for a function call which will be added in a subsequent
commit.  That function call will actually handle the INT_ENP_PHY_INT_
interrupt.

Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

smsc95xx_reset() resets the PHY behind the PHY driver's back, which
seems like a bad idea generally.  Remove that portion of the function.

We're about to use PHY interrupts instead of polling to detect link
changes on SMSC LAN95xx chips.  Because smsc95xx_reset() is called from
usbnet_open(), PHY interrupt settings are lost whenever the net_device
is brought up.

There are two other callers of smsc95xx_reset(), namely smsc95xx_bind()
and smsc95xx_reset_resume(), and both may indeed benefit from a PHY
reset.  However they already perform one through their calls to
phy_connect_direct() and phy_init_hw().

Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Gabriel Hojda <ghojda@yo2urs.ro>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Upon receiving data from the Interrupt Endpoint, the SMSC LAN95xx driver
attempts to clear the signaled interrupts by writing "all ones" to the
Interrupt Status Register.

However the driver only ever enables a single type of interrupt, namely
the PHY Interrupt.  And according to page 119 of the LAN950x datasheet,
its bit in the Interrupt Status Register is read-only.  There's no other
way to clear it than in a separate PHY register:

https://www.microchip.com/content/dam/mchp/documents/UNG/ProductDocuments/DataSheets/LAN950x-Data-Sheet-DS00001875D.pdf

Consequently, writing "all ones" to the Interrupt Status Register is
pointless and can be dropped.

Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 2c9d6c2b ("usbnet: run unbind() before unregister_netdev()")
sought to fix a use-after-free on disconnect of USB Ethernet adapters.

It turns out that a different fix is necessary to address the issue:
https://lore.kernel.org/netdev/18b3541e5372bc9b9fc733d422f4e698c089077c.1650177997.git.lukas@wunner.de/

So the commit was not necessary.

The commit made binding and unbinding of USB Ethernet asymmetrical:
Before, usbnet_probe() first invoked the ->bind() callback and then
register_netdev().  usbnet_disconnect() mirrored that by first invoking
unregister_netdev() and then ->unbind().

Since the commit, the order in usbnet_disconnect() is reversed and no
longer mirrors usbnet_probe().

One consequence is that a PHY disconnected (and stopped) in ->unbind()
is afterwards stopped once more by unregister_netdev() as it closes the
netdev before unregistering.  That necessitates a contortion in ->stop()
because the PHY may only be stopped if it hasn't already been
disconnected.

Reverting the commit allows making the call to phy_stop() unconditional
in ->stop().

Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove .owner field if calls are used which set it automatically.
./drivers/net/ethernet/sunplus/spl2sw_driver.c:569:3-8: No need to set
.owner here. The core will do it.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently If use page pool allocation stats to analysis a RX performance
degradation problem. These stats only count for pages allocate from
page_pool_alloc_pages. But nic drivers such as hns3 use
page_pool_dev_alloc_frag to allocate pages, so page stats in this API
should also be counted.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clean the following coccicheck warning:

./drivers/net/ethernet/sunplus/spl2sw_driver.c:217:27-28: WARNING
opportunity for swap().

./drivers/net/ethernet/sunplus/spl2sw_driver.c:222:27-28: WARNING
opportunity for swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Martin KaFai Lau says:

====================
net: inet: Retire port only listening_hash

This series is to retire the port only listening_hash.

The listen sk is currently stored in two hash tables,
listening_hash (hashed by port) and lhash2 (hashed by port and address).

After commit 0ee58dad ("net: tcp6: prefer listeners bound to an address")
and commit d9fbc7f6 ("net: tcp: prefer listeners bound to an address"),
the TCP-SYN lookup fast path does not use listening_hash.

The commit 05c0b357 ("tcp: seq_file: Replace listening_hash with lhash2")
also moved the seq_file (/proc/net/tcp) iteration usage from
listening_hash to lhash2.

There are still a few listening_hash usages left.
One of them is inet_reuseport_add_sock() which uses the listening_hash
to search a listen sk during the listen() system call.  This turns
out to be very slow on use cases that listen on many different
VIPs at a popular port (e.g. 443).  [ On top of the slowness in
adding to the tail in the IPv6 case ]. A latter patch has a
selftest to demonstrate this case.

This series takes this chance to move all remaining listening_hash
usages to lhash2 and then retire listening_hash.
====================

Link: https://lore.kernel.org/r/20220512000546.188616-1-kafai@fb.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch adds a test that has 300 VIPs listening on port 443.
Each VIP:443 will have 80 listening socks by using SO_REUSEPORT.
Thus, it will have 24000 listening socks.

Before removing the port only listening_hash, all socks will be in the
same port 443 bucket and inet_reuseport_add_sock() spends much time to
walk through the bucket.  After removing the port only listening_hash
and move all usage to the port+addr lhash2, each bucket in the
ideal case has 80 sk which is much smaller than before.

Here is the test result from a qemu:
Before: listen 24000 socks took 210.210485362 (~210s)
 After: listen 24000 socks took 0.207173      (~210ms)
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The listen sk is currently stored in two hash tables,
listening_hash (hashed by port) and lhash2 (hashed by port and address).

After commit 0ee58dad ("net: tcp6: prefer listeners bound to an address")
and commit d9fbc7f6 ("net: tcp: prefer listeners bound to an address"),
the TCP-SYN lookup fast path does not use listening_hash.

The commit 05c0b357 ("tcp: seq_file: Replace listening_hash with lhash2")
also moved the seq_file (/proc/net/tcp) iteration usage from
listening_hash to lhash2.

There are still a few listening_hash usages left.
One of them is inet_reuseport_add_sock() which uses the listening_hash
to search a listen sk during the listen() system call.  This turns
out to be very slow on use cases that listen on many different
VIPs at a popular port (e.g. 443).  [ On top of the slowness in
adding to the tail in the IPv6 case ].  The latter patch has a
selftest to demonstrate this case.

This patch takes this chance to move all remaining listening_hash
usages to lhash2 and then retire listening_hash.

Since most changes need to be done together, it is hard to cut
the listening_hash to lhash2 switch into small patches.  The
changes in this patch is highlighted here for the review
purpose.

1. Because of the listening_hash removal, lhash2 can use the
   sk->sk_nulls_node instead of the icsk->icsk_listen_portaddr_node.
   This will also keep the sk_unhashed() check to work as is
   after stop adding sk to listening_hash.

   The union is removed from inet_listen_hashbucket because
   only nulls_head is needed.

2. icsk->icsk_listen_portaddr_node and its helpers are removed.

3. The current lhash2 users needs to iterate with sk_nulls_node
   instead of icsk_listen_portaddr_node.

   One case is in the inet[6]_lhash2_lookup().

   Another case is the seq_file iterator in tcp_ipv4.c.
   One thing to note is sk_nulls_next() is needed
   because the old inet_lhash2_for_each_icsk_continue()
   does a "next" first before iterating.

4. Move the remaining listening_hash usage to lhash2

   inet_reuseport_add_sock() which this series is
   trying to improve.

   inet_diag.c and mptcp_diag.c are the final two
   remaining use cases and is moved to lhash2 now also.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch folds lhash2 related functions into __inet_hash and
inet_unhash.  This will make the removal of the listening_hash
in a latter patch easier to review.

First, this patch folds inet_hash2 into __inet_hash.

For unhash, the current call sequence is like
inet_unhash() => __inet_unhash() => inet_unhash2().
The specific testing cases in __inet_unhash() are mostly related
to TCP_LISTEN sk and its caller inet_unhash() already has
the TCP_LISTEN test, so this patch folds both __inet_unhash() and
inet_unhash2() into inet_unhash().

Note that all listening_hash users also have lhash2 initialized,
so the !h->lhash2 check is no longer needed.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

After commit 0ee58dad ("net: tcp6: prefer listeners bound to an address")
and commit d9fbc7f6 ("net: tcp: prefer listeners bound to an address"),
the count is no longer used.  This patch removes it.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Martin Habets says:

====================
Make sfc-siena.ko specific to Siena

This series is a follow-up to the one titled "Move Siena into
a separate subdirectory".
It enhances the new sfc-siena.ko module to differentiate it from sfc.ko.

	Patches

Patches 1-5 create separate Kconfig options for Siena, and adjusts the
various names used for work items and directories.
Patch 6 reinstates SRIOV functionality in sfc-siena.ko.

	Testing

Various build tests were done such as allyesconfig, W=1 and sparse.
The new sfc-siena.ko and sfc.ko modules were tested on a machine with NICs
for both modules in them.
Inserting the updated sfc.ko and the new sfc-siena.ko modules at the same
time works, and no work items and directories exist with the same name.
====================

Link: https://lore.kernel.org/r/165228589518.696.7119477411428288875.stgit@palantir17.mph.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

They were removed in the first series since they were not used for EF10.
Put that code back for Siena, with the prototypes in siena_sriov.h
since that file is a more applicable place for it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Change the clock name and work queue names to differentiate them from
the names used in sfc.ko.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a Siena Kconfig option and use it in stead of the sfc one.
Rename the internal variable for the 'mcdi_logging_default' module
parameter to avoid a naming conflict with the one in sfc.ko.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a Siena Kconfig option and use it in stead of the sfc one.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a Siena Kconfig option and use it in stead of the sfc one.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a Siena Kconfig option and use it in stead of the sfc one.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Vladimir Oltean says:

====================
Restructure struct ocelot_port

This patch set represents preparation for further work. It adds an
"index" field to struct ocelot_port, and populates it from the Felix DSA
driver and Ocelot switchdev driver.

The users of struct ocelot_port :: index are the same users as those of
struct ocelot_port_private :: chip_port.
====================

Link: https://lore.kernel.org/r/20220511100637.568950-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the ocelot switch lib is unaware of the index of a struct
ocelot_port, since that is kept in the encapsulating structures of outer
drivers (struct dsa_port :: index, struct ocelot_port_private :: chip_port).

With the upcoming increase in complexity associated with assigning DSA
tag_8021q CPU ports to certain user ports, it becomes necessary for the
switch lib to be able to retrieve the index of a certain ocelot_port.

Therefore, introduce a new u8 to ocelot_port (same size as the chip_port
used by the ocelot switchdev driver) and rework the existing code to
populate and use it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Reorder members of struct ocelot_port to eliminate holes and reduce
structure size. Pahole says:

Before:

struct ocelot_port {
        struct ocelot *            ocelot;               /*     0     8 */
        struct regmap *            target;               /*     8     8 */
        bool                       vlan_aware;           /*    16     1 */

        /* XXX 7 bytes hole, try to pack */

        const struct ocelot_bridge_vlan  * pvid_vlan;    /*    24     8 */
        unsigned int               ptp_skbs_in_flight;   /*    32     4 */
        u8                         ptp_cmd;              /*    36     1 */

        /* XXX 3 bytes hole, try to pack */

        struct sk_buff_head        tx_skbs;              /*    40    96 */
        /* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */
        u8                         ts_id;                /*   136     1 */

        /* XXX 3 bytes hole, try to pack */

        phy_interface_t            phy_mode;             /*   140     4 */
        bool                       is_dsa_8021q_cpu;     /*   144     1 */
        bool                       learn_ena;            /*   145     1 */

        /* XXX 6 bytes hole, try to pack */

        struct net_device *        bond;                 /*   152     8 */
        bool                       lag_tx_active;        /*   160     1 */

        /* XXX 1 byte hole, try to pack */

        u16                        mrp_ring_id;          /*   162     2 */

        /* XXX 4 bytes hole, try to pack */

        struct net_device *        bridge;               /*   168     8 */
        int                        bridge_num;           /*   176     4 */
        u8                         stp_state;            /*   180     1 */

        /* XXX 3 bytes hole, try to pack */

        int                        speed;                /*   184     4 */

        /* size: 192, cachelines: 3, members: 18 */
        /* sum members: 161, holes: 7, sum holes: 27 */
        /* padding: 4 */
};

After:

struct ocelot_port {
        struct ocelot *            ocelot;               /*     0     8 */
        struct regmap *            target;               /*     8     8 */
        struct net_device *        bond;                 /*    16     8 */
        struct net_device *        bridge;               /*    24     8 */
        const struct ocelot_bridge_vlan  * pvid_vlan;    /*    32     8 */
        phy_interface_t            phy_mode;             /*    40     4 */
        unsigned int               ptp_skbs_in_flight;   /*    44     4 */
        struct sk_buff_head        tx_skbs;              /*    48    96 */
        /* --- cacheline 2 boundary (128 bytes) was 16 bytes ago --- */
        u16                        mrp_ring_id;          /*   144     2 */
        u8                         ptp_cmd;              /*   146     1 */
        u8                         ts_id;                /*   147     1 */
        u8                         stp_state;            /*   148     1 */
        bool                       vlan_aware;           /*   149     1 */
        bool                       is_dsa_8021q_cpu;     /*   150     1 */
        bool                       learn_ena;            /*   151     1 */
        bool                       lag_tx_active;        /*   152     1 */

        /* XXX 3 bytes hole, try to pack */

        int                        bridge_num;           /*   156     4 */
        int                        speed;                /*   160     4 */

        /* size: 168, cachelines: 3, members: 18 */
        /* sum members: 161, holes: 1, sum holes: 3 */
        /* padding: 4 */
        /* last cacheline: 40 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is no longer used since commit 7c4bb540 ("net: dsa: tag_ocelot:
create separate tagger for Seville").
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Vladimir Oltean says:

====================
DSA changes for multiple CPU ports (part 1)

I am trying to enable the second internal port pair from the NXP LS1028A
Felix switch for DSA-tagged traffic via "ocelot-8021q". This series
represents part 1 (of an unknown number) of that effort.

It does some preparation work, like managing host flooding in DSA via a
dedicated method, and removing the CPU port as argument from the tagging
protocol change procedure.

In terms of driver-specific changes, it reworks the 2 tag protocol
implementations in the Felix driver to have a structured data format.
It enables host flooding towards all tag_8021q CPU ports. It dynamically
updates the tag_8021q CPU port used for traps. It also fixes a bug
introduced by a previous refactoring/oversimplification commit in
net-next.
====================

Link: https://lore.kernel.org/r/20220511095020.562461-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The error handling for the current tagging protocol change procedure is
a bit brittle (we dismantle the previous tagging protocol entirely
before setting up the new one). By identifying which parts of a tagging
protocol are unique to itself and which parts are shared with the other,
we can implement a protocol change procedure where error handling is a
bit more robust, because we start setting up the new protocol first, and
tear down the old one only after the setup of the specific and shared
parts succeeded.

The protocol change is a bit too open-coded too, in the area of
migrating host flood settings and MDBs. By identifying what differs
between tagging protocols (the forwarding masks for host flooding) we
can implement a more straightforward migration procedure which is
handled in the shared portion of the protocol change, rather than
individually by each protocol.

Therefore, a more structured approach calls for the introduction of a
structure of function pointers per tagging protocol. This covers setup,
teardown and the host forwarding mask. In the future it will also cover
how to prepare for a new DSA master.

The initial tagging protocol setup (at driver probe time) and the final
teardown (at driver removal time) are also adapted to call into the
structured methods of the specific protocol in current use. This is
especially relevant for teardown, where we previously called
felix_del_tag_protocol() only for the first CPU port. But by not
specifying which CPU port this is for, we gain more flexibility to
support multiple CPU ports in the future.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>