- 22 Sep, 2016 35 commits
-
-
Sean Young authored
Currently we do not know what variant (bit length) of the nec protocol is used, other than from guessing from the length of the scancode. Now nec will be handled the same way as the sony protocol or the rc6 protocol; one variant per bit length. In the future we might want to expose the rc protocol type to userspace and we don't want to be introducing this world of pain into userspace too. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Sean Young authored
The hardware does not decode the 16, 20 or 24 bit variety. Signed-off-by:
-
Sean Young authored
When reporting decoded protocol use the enum rather than the bitmap. Signed-off-by:
-
Heiner Kallweit authored
Simplify the code a little. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
ir_raw_event_handle is called anyway after the hw fifo content stored in nvt->buf[] has been written to the kfifo. There is not really a benefit in the potential additional call to ir_raw_event_handle whilst nvt->buf[] is being processed. Getting rid of this additional call allows to simplify the code. Signed-off-by:
-
Heiner Kallweit authored
The call to nvt_get_rx_ir_data and nvt_process_rx_ir_data from the ISR is protected with spinlock nvt->lock. Therefore it's guaranteed that nvt->pkts is 0 when entering nvt_get_rx_ir_data (as nvt->pkts is set to 0 at the end of nvt_process_rx_ir_data). Having said that we can remove b_idx. Signed-off-by:
-
Heiner Kallweit authored
When removing module nuvoton-cir I get a fifo overrun warning. It turned out to be caused by a spurious interrupt when the logical CIR device is being disabled (although no interrupt source bit being set). Reading the interrupt status register returns 0xff, therefore the fifo overrun bit is mistakenly interpreted as being set. Fix this by ignoring interrupts when interrupt source and status register reads return 0xff. Signed-off-by:
-
Heiner Kallweit authored
When removing module ir_lirc_codec I got this deadlock warning. Fix this by introducing a separate mutex to protect access to available_protocols instead of using ir_raw_handler_lock for this purpose. ====================================================== [ INFO: possible circular locking dependency detected ] 4.7.0-next-20160729 #1 Not tainted ------------------------------------------------------- rmmod/2542 is trying to acquire lock: (&dev->lock){+.+.+.}, at: [<ffffffffa03b1267>] ir_raw_handler_unregister+0x77/0xd0 [rc_core] but task is already holding lock: (ir_raw_handler_lock){+.+.+.}, at: [<ffffffffa03b1212>] ir_raw_handler_unregister+0x22/0xd0 [rc_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (ir_raw_handler_lock){+.+.+.}: [<ffffffff810ab1f2>] lock_acquire+0xb2/0x1e0 [<ffffffff815c087f>] mutex_lock_nested+0x5f/0x360 [<ffffffffa03b1403>] ir_raw_get_allowed_protocols+0x13/0x30 [rc_core] [<ffffffffa03af8ea>] store_protocols+0x2fa/0x480 [rc_core] [<ffffffff8143e143>] dev_attr_store+0x13/0x20 [<ffffffff81213c50>] sysfs_kf_write+0x40/0x50 [<ffffffff81212f60>] kernfs_fop_write+0x150/0x1e0 [<ffffffff81197613>] __vfs_write+0x23/0x120 [<ffffffff81198740>] vfs_write+0xb0/0x190 [<ffffffff81199a34>] SyS_write+0x44/0xa0 [<ffffffff815c55a5>] entry_SYSCALL_64_fastpath+0x18/0xa8 -> #0 (&dev->lock){+.+.+.}: [<ffffffff810aac8c>] __lock_acquire+0x10fc/0x1270 [<ffffffff810ab1f2>] lock_acquire+0xb2/0x1e0 [<ffffffff815c087f>] mutex_lock_nested+0x5f/0x360 [<ffffffffa03b1267>] ir_raw_handler_unregister+0x77/0xd0 [rc_core] [<ffffffffa03c8c05>] ir_lirc_codec_exit+0x10/0x12 [ir_lirc_codec] [<ffffffff810e1b88>] SyS_delete_module+0x168/0x220 [<ffffffff815c55a5>] entry_SYSCALL_64_fastpath+0x18/0xa8 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(ir_raw_handler_lock); lock(&dev->lock); lock(ir_raw_handler_lock); lock(&dev->lock); *** DEADLOCK *** 1 lock held by rmmod/2542: #0: (ir_raw_handler_lock){+.+.+.}, at: [<ffffffffa03b1212>] ir_raw_handler_unregister+0x22/0xd0 [rc_core] stack backtrace: CPU: 0 PID: 2542 Comm: rmmod Not tainted 4.7.0-next-20160729 #1 Hardware name: ZOTAC ZBOX-CI321NANO/ZBOX-CI321NANO, BIOS B246P105 06/01/2015 0000000000000000 ffff88006e607cc0 ffffffff812715f5 ffffffff8232b230 ffffffff8232b230 ffff88006e607d00 ffffffff810a846e 00000000790107f0 ffff880079010818 ffff8800790107f0 1efeb9f4f0dd2e6f ffff880079010000 Call Trace: [<ffffffff812715f5>] dump_stack+0x68/0x93 [<ffffffff810a846e>] print_circular_bug+0x1be/0x210 [<ffffffff810aac8c>] __lock_acquire+0x10fc/0x1270 [<ffffffff810bcead>] ? debug_lockdep_rcu_enabled+0x1d/0x20 [<ffffffff810ab1f2>] lock_acquire+0xb2/0x1e0 [<ffffffffa03b1267>] ? ir_raw_handler_unregister+0x77/0xd0 [rc_core] [<ffffffff815c087f>] mutex_lock_nested+0x5f/0x360 [<ffffffffa03b1267>] ? ir_raw_handler_unregister+0x77/0xd0 [rc_core] [<ffffffff810a980e>] ? trace_hardirqs_on_caller+0xee/0x1b0 [<ffffffffa03b1267>] ir_raw_handler_unregister+0x77/0xd0 [rc_core] [<ffffffffa03c8c05>] ir_lirc_codec_exit+0x10/0x12 [ir_lirc_codec] [<ffffffff810e1b88>] SyS_delete_module+0x168/0x220 [<ffffffff815c55a5>] entry_SYSCALL_64_fastpath+0x18/0xa8 Signed-off-by: -
Ole Ernst authored
This partly reverts commit 078600f5. Due to the relocation of input_register_device() call, holding down a button on an IR remote no longer resulted in repeated key down events. Signed-off-by:
Ole Ernst <olebowle@gmx.com> Tested-by:
Matthias Reichl <hias@horus.com> Signed-off-by:
-
Antti Palosaari authored
Use regmap for I2C register access. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Check demod and ts locks and report lock status according to those. Signed-off-by:
-
Antti Palosaari authored
Use correct device for logging functions as we now have it due to proper I2C client bindings. Signed-off-by:
-
Antti Palosaari authored
Add I2C driver bindings in order to support proper I2C driver registration with driver core. Signed-off-by:
-
Antti Palosaari authored
Return DVBv5 statistics via legacy DVBv3 API. Signed-off-by:
-
Antti Palosaari authored
Implement dvbv5 statistics for DVB-C. Signed-off-by:
-
Antti Palosaari authored
Implement dvbv5 statistics for DVB-T2. Signed-off-by:
-
Antti Palosaari authored
Implement dvbv5 statistics for DVB-T. Signed-off-by:
-
Antti Palosaari authored
Use 64-bit calculation. Return error if tuner does not provide get_if_frequency() callback. All currently used tuners has it. Signed-off-by:
-
Sakari Ailus authored
New IOCTLs (especially for the request API) do not necessarily need the graph mutex acquired. Leave this up to the drivers. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Sakari Ailus authored
Refactor copying the IOCTL argument structs from the user space and back, in order to reduce code copied around and make the implementation more robust. As a result, the copying is done while not holding the graph mutex. Signed-off-by:
-
Sakari Ailus authored
Each IOCTL handler can be listed in an array instead of using a large and cumbersome switch. Do that. Signed-off-by:
-
Sakari Ailus authored
Preparation for refactoring media IOCTL handling to unify common parts. Signed-off-by:
-
Sylwester Nawrocki authored
Instead of relying on the "simple-bus" compatible and the driver core populating FIMC-IS child devices make the fimc-is driver populating its child devices. This prevents issues related to accessing ISP_I2C clock registers with corresponding power domain switched off, which popped out after applying some pending IOMMU driver patches. Now the I2C_ISP child devices will be instantiated only when required parent device drivers are initialized and ready. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Since commit 04f59143 ("i2c: let I2C masters ignore their children for PM") the power.ignore_children flag is set when registering an I2C adapter. Since I2C transfers are not managed by the fimc-isp-i2c driver its clients use pm_runtime_* calls directly to communicate required power state of the bus controller. However, when the power.ignore_children flag is set that doesn't work, so clear that flag back after registering the adapter. While at it drop pm_runtime_enable() call on the i2c_adapter as it is already done by the I2C subsystem when registering I2C adapter. This patch is meant as a minimal change to fix the regression, eventually the I2C_ISPx clock handling will be moved to the top level fimc-is driver and whole runtime PM code is going to be dropped from the fimc-is-i2c module. Cc: <stable@vger.kernel.org> # 4.7+ Reported-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Suppresses warnings like: s5p-fimc-md camera: Entity type for entity S5C73M3-OIF was not initialized! Signed-off-by:
-
Sylwester Nawrocki authored
Suppresses warning like: s5p-fimc-md camera: Entity type for entity S5K6A3 13-0010 was not initialized! Signed-off-by:
-
Sylwester Nawrocki authored
Suppresses following warnings: s5p-fimc-md camera: Entity type for entity FIMC.0 was not initialized! s5p-fimc-md camera: Entity type for entity FIMC.1 was not initialized! s5p-fimc-md camera: Entity type for entity s5p-mipi-csis.0 was not initialized! s5p-fimc-md camera: Entity type for entity s5p-mipi-csis.1 was not initialized! s5p-fimc-md camera: Entity type for entity FIMC-LITE.0 was not initialized! s5p-fimc-md camera: Entity type for entity FIMC-LITE.1 was not initialized! s5p-fimc-md camera: Entity type for entity FIMC-IS-ISP was not initialized! Signed-off-by:
-
Marek Szyprowski authored
There is no need to keep all clocks prepared all the time. Call to clk_prepare/unprepare can be done on demand from runtime pm callbacks (it is allowed to call sleeping functions from that context). Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
This patch adds 3 more clocks to Exynos4 ISP driver. Enabling them is needed to make the hardware operational. Till now it worked only because those clocks were registered with IGNORE_UNUSED flag and were enabled by default after SoC reset. Signed-off-by:
-
Christophe JAILLET authored
It is likely that checking the result of the memory allocation just above is expected here. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Marek Szyprowski authored
Use generic helpers instead of open-coding usage of runtime PM for system sleep PM, which was potentially broken for some corner cases. Signed-off-by:
-
Marek Szyprowski authored
Use generic helpers instead of open-coding usage of runtime PM for system sleep PM, which was potentially broken for some corner cases. Signed-off-by:
-
Mauro Carvalho Chehab authored
As warned by linuxdoc[1] tool, using: $ for i in $(git grep kernel-doc Documentation/media/kapi/|cut -d: -f4); do kernel-lintdoc --sloppy $i; done include/media/v4l2-dev.h:118 :WARN: function name from comment differs: v4l2_prio_close <--> v4l2_prio_check include/media/v4l2-mc.h:56 [kernel-doc WARN] : enum name from comment differs: if_vid_dec_index <--> if_vid_dec_pad_index include/media/v4l2-mc.h:71 [kernel-doc WARN] : enum name from comment differs: if_aud_dec_index <--> if_aud_dec_pad_index include/media/v4l2-mem2mem.h:396 [kernel-doc WARN] : function name from comment differs: v4l2_m2m_num_src_bufs_ready <--> v4l2_m2m_num_dst_bufs_ready drivers/media/dvb-core/dvb_math.h:28 [kernel-doc WARN] : function name from comment differs: cintlog2 <--> intlog2 include/media/v4l2-subdev.h:215 [kernel-doc WARN] : struct name from comment differs: s_radio <--> v4l2_subdev_tuner_ops include/media/v4l2-subdev.h:890 [kernel-doc WARN] : function name from comment differs: v4l2_set_subdevdata <--> v4l2_set_subdev_hostdata include/media/v4l2-subdev.h:901 [kernel-doc WARN] : function name from comment differs: v4l2_get_subdevdata <--> v4l2_get_subdev_hostdata drivers/media/dvb-core/dvb_ringbuffer.h:196 [kernel-doc WARN] : function name from comment differs: dvb_ringbuffer_writeuser <--> dvb_ringbuffer_write_user include/media/videobuf2-core.h:399 [kernel-doc WARN] : struct name from comment differs: vb2_ops <--> vb2_buf_ops include/media/media-entity.h:132 [kernel-doc ERROR] : duplicate parameter definition 'source' include/media/media-entity.h:477 [kernel-doc WARN] : function name from comment differs: media_entity_enum_test <--> media_entity_enum_test_and_set include/media/media-entity.h:535 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_pad include/media/media-entity.h:544 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_link include/media/media-entity.h:553 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_intf include/media/media-entity.h:562 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> intf_to_devnode include/media/rc-core.h:234 [kernel-doc WARN] : function name from comment differs: rc_open <--> rc_close include/media/v4l2-ctrls.h:397 [kernel-doc WARN] : missing initial short description of 'v4l2_ctrl_handler_init' include/media/v4l2-dev.h:118 [kernel-doc WARN] : function name from comment differs: v4l2_prio_close <--> v4l2_prio_check include/media/v4l2-event.h:225 [kernel-doc WARN] : missing initial short description of 'v4l2_src_change_event_subscribe' [1] https://return42.github.io/linuxdoc/linux.html The above are real issues at the documentation. On several cases, caused by cut-and-paste. Fix them. Signed-off-by: -
Laurent Pinchart authored
Shorten the tables by removing row numbers in comments, allowing for later insertion of rows with minimal diffs. All changes have been generated by the following script. import io import re import sys def process_table(fname, data): if fname.endswith('hist-v4l2.rst'): data = re.sub(u'\n{1,2}\t( ?) -( ?) ?', u'\n\t\\1 -\\2', data, flags = re.MULTILINE) data = re.sub(u'\n(\t| )- \.\. row [0-9]+\n\t ?-( ?) ?', u'\\1* -\\2', data, flags = re.MULTILINE) else: data = re.sub(u'\n{1,2} -( ?) ?', u'\n -\\1', data, flags = re.MULTILINE) data = re.sub(u'(\n?)(\n\n - \.\. row 1\n)', u'\n\\2', data, flags = re.MULTILINE) data = re.sub(u'\n - \.\. row [0-9]+\n -( ?) ?', u' * -\\1', data, flags = re.MULTILINE) data = re.sub(u'\n - \.\. row [0-9]+\n \.\. (_[A-Z0-9_`-]*:)', u'\n - .. \\1', data, flags = re.MULTILINE) data = re.sub(u'\n - \.\. (_[A-Z0-9_`-]*:)\n -', u' * .. \\1\n\n -', data, flags = re.MULTILINE) data = re.sub(u'^ - ', u' -', data, flags = re.MULTILINE) data = re.sub(u'^(\t{1,2}) ', u'\\1', data, flags = re.MULTILINE) return data def process_file(fname, data): buf = io.StringIO(data) output = '' in_table = False table_separator = 0 for line in buf.readlines(): if line.find('.. flat-table::') != -1: in_table = True table = '' elif in_table and not re.match('^[\t\n]|( )', line): in_table = False output += process_table(fname, table) if in_table: table += line else: output += line if in_table: in_table = False output += process_table(fname, table) return output fname = sys.argv[1] data = file(fname, 'rb').read().decode('utf-8') data = process_file(fname, data) file(fname, 'wb').write(data.encode('utf-8')) Signed-off-by: -
Laurent Pinchart authored
Fix a few indentation issues to enable automated table reorganization by a regex-based script. Signed-off-by:
-
- 19 Sep, 2016 5 commits
-
-
git://git.lwn.net/linux.gitMauro Carvalho Chehab authored
Merge back from docs-next in order to get the cdomain extension. With such extension, the number of warnings when building docs in nitpick mode reduced from 22 to 2 warnings. * docs-next/docs-next: docs/driver-model: fix typo DMA-API-HOWTO: <asm/generic/scatterlist.h> is no more doc-rst:c-domain: function-like macros arguments doc-rst:c-domain: fix sphinx version incompatibility Documentation/filesystems: Fixed typo docs: Don't format internal MPT docs docs: split up serial-interfaces.rst docs: Pull the HSI documentation together docs: Special-case function-pointer parameters in kernel-doc docs: make kernel-doc handle varargs properly x86: fix memory ranges in mm documentation documentation/scsi: Remove nodisconnect parameter doc: ioctl: Add some clarifications to botching-up-ioctls docs: split up the driver book Docs: sphinxify device-drivers.tmpl
-
Ulrich Hecht authored
Signed-off-by:
Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by:
-
Ulrich Hecht authored
Adds G_EDID and S_EDID. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
-
Niklas Söderlund authored
The driver is maintained and supported, document it as such. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Niklas Söderlund authored
The HW can capture both ODD and EVEN fields in separate buffers so it's possible to support V4L2_FIELD_ALTERNATE. This patch add support for this mode. At probe time and when S_STD is called the driver will default to use V4L2_FIELD_INTERLACED if the subdevice reports V4L2_FIELD_ALTERNATE. The driver will only change the field type if the subdevice implements G_STD, if not it will keep the default at V4L2_FIELD_ALTERNATE. The user can always explicitly ask for V4L2_FIELD_ALTERNATE in S_FMT and the driver will use that field format. Signed-off-by:
-
