- 08 Jul, 2022 9 commits
-
-
Kuniyuki Iwashima authored
A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing. This patch changes proc_douintvec_minmax() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_douintvec_minmax() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side. Fixes: 61d9b56a ("sysctl: add unsigned int range support") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing. This patch changes proc_dointvec_minmax() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_dointvec_minmax() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing. This patch changes proc_douintvec() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_douintvec() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side. Fixes: e7d316a0 ("sysctl: handle error writing UINT_MAX to u32 fields") Signed-off-by:
-
Kuniyuki Iwashima authored
A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing. This patch changes proc_dointvec() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_dointvec() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Steven Rostedt (Google) authored
The trace event sock_exceed_buf_limit saves the prot->sysctl_mem pointer and then dereferences it in the TP_printk() portion. This is unsafe as the TP_printk() portion is executed at the time the buffer is read. That is, it can be seconds, minutes, days, months, even years later. If the proto is freed, then this dereference will can also lead to a kernel crash. Instead, save the sysctl_mem array into the ring buffer and have the TP_printk() reference that instead. This is the proper and safe way to read pointers in trace events. Link: https://lore.kernel.org/all/20220706052130.16368-12-kuniyu@amazon.com/ Cc: stable@vger.kernel.org Fixes: 3847ce32 ("core: add tracepoints for queueing skb to rcvbuf") Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by:
-
Pavel Skripkin authored
Accidentally noticed, that this driver is the only user of while (time_after(jiffies...)). It looks like typo, because likely this while loop will finish after 1st iteration, because time_after() returns true when 1st argument _is after_ 2nd one. There is one possible problem with this poll loop: the scheduler could put the thread to sleep, and it does not get woken up for OCELOT_FDMA_CH_SAFE_TIMEOUT_US. During that time, the hardware has done its thing, but you exit the while loop and return -ETIMEDOUT. Fix it by using sane poll API that avoids all problems described above Fixes: 753a026c ("net: ocelot: add FDMA support") Suggested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220706132845.27968-1-paskripkin@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2022-07-06 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2022-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Ring the TX doorbell on DMA errors net/mlx5e: Fix capability check for updating vnic env counters net/mlx5e: CT: Use own workqueue instead of mlx5e priv net/mlx5: Lag, correct get the port select mode str net/mlx5e: Fix enabling sriov while tc nic rules are offloaded net/mlx5e: kTLS, Fix build time constant test in RX net/mlx5e: kTLS, Fix build time constant test in TX net/mlx5: Lag, decouple FDB selection and shared FDB net/mlx5: TC, allow offload from uplink to other PF's VF ==================== Link: https://lore.kernel.org/r/20220706231309.38579-1-saeed@kernel.orgSigned-off-by:
-
Siddharth Vadapalli authored
Renaming interfaces using udevd depends on the interface being registered before its netdev is registered. Otherwise, udevd reads an empty phys_port_name value, resulting in the interface not being renamed. Fix this by registering the interface before registering its netdev by invoking am65_cpsw_nuss_register_devlink() before invoking register_netdev() for the interface. Move the function call to devlink_port_type_eth_set(), invoking it after register_netdev() is invoked, to ensure that netlink notification for the port state change is generated after the netdev is completely initialized. Fixes: 58356eb3 ("net: ti: am65-cpsw-nuss: Add devlink support") Signed-off-by:
Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://lore.kernel.org/r/20220706070208.12207-1-s-vadapalli@ti.comSigned-off-by:
-
Jon Hunter authored
There is a long-standing issue with the Synopsys DWC Ethernet driver for Tegra194 where random system crashes have been observed [0]. The problem occurs when the split header feature is enabled in the stmmac driver. In the bad case, a larger than expected buffer length is received and causes the calculation of the total buffer length to overflow. This results in a very large buffer length that causes the kernel to crash. Why this larger buffer length is received is not clear, however, the feedback from the NVIDIA design team is that the split header feature is not supported for Tegra194. Therefore, disable split header support for Tegra194 to prevent these random crashes from occurring. [0] https://lore.kernel.org/linux-tegra/b0b17697-f23e-8fa5-3757-604a86f3a095@nvidia.com/ Fixes: 67afd6d1 ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20220706083913.13750-1-jonathanh@nvidia.comSigned-off-by:
-
- 07 Jul, 2022 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bpf, netfilter, can, and bluetooth. Current release - regressions: - bluetooth: fix deadlock on hci_power_on_sync Previous releases - regressions: - sched: act_police: allow 'continue' action offload - eth: usbnet: fix memory leak in error case - eth: ibmvnic: properly dispose of all skbs during a failover Previous releases - always broken: - bpf: - fix insufficient bounds propagation from adjust_scalar_min_max_vals - clear page contiguity bit when unmapping pool - netfilter: nft_set_pipapo: release elements in clone from abort path - mptcp: netlink: issue MP_PRIO signals from userspace PMs - can: - rcar_canfd: fix data transmission failed on R-Car V3U - gs_usb: gs_usb_open/close(): fix memory leak Misc: - add Wenjia as SMC maintainer" * tag 'net-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) wireguard: Kconfig: select CRYPTO_CHACHA_S390 crypto: s390 - do not depend on CRYPTO_HW for SIMD implementations wireguard: selftests: use microvm on x86 wireguard: selftests: always call kernel makefile wireguard: selftests: use virt machine on m68k wireguard: selftests: set fake real time in init r8169: fix accessing unset transport header net: rose: fix UAF bug caused by rose_t0timer_expiry usbnet: fix memory leak in error case Revert "tls: rx: move counting TlsDecryptErrors for sync" mptcp: update MIB_RMSUBFLOW in cmd_sf_destroy mptcp: fix local endpoint accounting selftests: mptcp: userspace PM support for MP_PRIO signals mptcp: netlink: issue MP_PRIO signals from userspace PMs mptcp: Acquire the subflow socket lock before modifying MP_PRIO flags mptcp: Avoid acquiring PM lock for subflow priority changes mptcp: fix locking in mptcp_nl_cmd_sf_destroy() net/mlx5e: Fix matchall police parameters validation net/sched: act_police: allow 'continue' action offload net: lan966x: hardcode the number of external ports ... -
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: - Tag Intel pin control as supported in MAINTAINERS - Fix a NULL pointer exception in the Aspeed driver - Correct some NAND functions in the Sunxi A83T driver - Use the right offset for some Sunxi pins - Fix a zero base offset in the Freescale (NXP) i.MX93 - Fix the IRQ support in the STM32 driver * tag 'pinctrl-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: stm32: fix optional IRQ support to gpios pinctrl: imx: Add the zero base flag for imx93 pinctrl: sunxi: sunxi_pconf_set: use correct offset pinctrl: sunxi: a83t: Fix NAND function name for some pins pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux() MAINTAINERS: Update Intel pin control to Supported
-
Linus Torvalds authored
These are indeed "should not happen" situations, but it turns out recent changes made the 'task_is_stopped_or_trace()' case trigger (fix for that exists, is pending more testing), and the BUG_ON() makes it unnecessarily hard to actually debug for no good reason. It's been that way for a long time, but let's make it clear: BUG_ON() is not good for debugging, and should never be used in situations where you could just say "this shouldn't happen, but we can continue". Use WARN_ON_ONCE() instead to make sure it gets logged, and then just continue running. Instead of making the system basically unusuable because you crashed the machine while potentially holding some very core locks (eg this function is commonly called while holding 'tasklist_lock' for writing). Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Jakub Kicinski authored
Jason A. Donenfeld says: ==================== wireguard patches for 5.19-rc6 1) A few small fixups to the selftests, per usual. Of particular note is a fix for a test flake that occurred on especially fast systems that boot in less than a second. 2) An addition during this cycle of some s390 crypto interacted with the way wireguard selects dependencies, resulting in linker errors reported by the kernel test robot. So Vladis sent in a patch for that, which also required a small preparatory fix moving some Kconfig symbols around. ==================== Link: https://lore.kernel.org/r/20220707003157.526645-1-Jason@zx2c4.comSigned-off-by:
-
Vladis Dronov authored
Select the new implementation of CHACHA20 for S390 when available. It is faster than the generic software implementation, but also prevents some linker errors in certain situations. Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/linux-kernel/202207030630.6SZVkrWf-lkp@intel.com/Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Jason A. Donenfeld authored
Various accelerated software implementation Kconfig values for S390 were mistakenly placed into drivers/crypto/Kconfig, even though they're mainly just SIMD code and live in arch/s390/crypto/ like usual. This gives them the very unusual dependency on CRYPTO_HW, which leads to problems elsewhere. This patch fixes the issue by moving the Kconfig values for non-hardware drivers into the usual place in crypto/Kconfig. Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jason A. Donenfeld authored
This makes for faster tests, faster compile time, and allows us to ditch ACPI finally. Signed-off-by:
-
Jason A. Donenfeld authored
These selftests are used for much more extensive changes than just the wireguard source files. So always call the kernel's build file, which will do something or nothing after checking the whole tree, per usual. Signed-off-by:
-
Jason A. Donenfeld authored
This should be a bit more stable hopefully. Signed-off-by:
-
Jason A. Donenfeld authored
Not all platforms have an RTC, and rather than trying to force one into each, it's much easier to just set a fixed time. This is necessary because WireGuard's latest handshakes parameter is returned in wallclock time, and if the system time isn't set, and the system is really fast, then this returns 0, which trips the test. Turning this on requires setting CONFIG_COMPAT_32BIT_TIME=y, as musl doesn't support settimeofday without it. Signed-off-by:
-
Heiner Kallweit authored
66e4c8d9 ("net: warn if transport header was not set") added a check that triggers a warning in r8169, see [0]. The commit referenced in the Fixes tag refers to the change from which the patch applies cleanly, there's nothing wrong with this commit. It seems the actual issue (not bug, because the warning is harmless here) was introduced with bdfa4ed6 ("r8169: use Giant Send"). [0] https://bugzilla.kernel.org/show_bug.cgi?id=216157 Fixes: 8d520b4d ("r8169: work around RTL8125 UDP hw bug") Reported-by:
Erhard F. <erhard_f@mailbox.org> Tested-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/1b2c2b29-3dc0-f7b6-5694-97ec526d51a0@gmail.comSigned-off-by:
-
Duoming Zhou authored
There are UAF bugs caused by rose_t0timer_expiry(). The root cause is that del_timer() could not stop the timer handler that is running and there is no synchronization. One of the race conditions is shown below: (thread 1) | (thread 2) | rose_device_event | rose_rt_device_down | rose_remove_neigh rose_t0timer_expiry | rose_stop_t0timer(rose_neigh) ... | del_timer(&neigh->t0timer) | kfree(rose_neigh) //[1]FREE neigh->dce_mode //[2]USE | The rose_neigh is deallocated in position [1] and use in position [2]. The crash trace triggered by POC is like below: BUG: KASAN: use-after-free in expire_timers+0x144/0x320 Write of size 8 at addr ffff888009b19658 by task swapper/0/0 ... Call Trace: <IRQ> dump_stack_lvl+0xbf/0xee print_address_description+0x7b/0x440 print_report+0x101/0x230 ? expire_timers+0x144/0x320 kasan_report+0xed/0x120 ? expire_timers+0x144/0x320 expire_timers+0x144/0x320 __run_timers+0x3ff/0x4d0 run_timer_softirq+0x41/0x80 __do_softirq+0x233/0x544 ... This patch changes rose_stop_ftimer() and rose_stop_t0timer() in rose_remove_neigh() to del_timer_sync() in order that the timer handler could be finished before the resources such as rose_neigh and so on are deallocated. As a result, the UAF bugs could be mitigated. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220705125610.77971-1-duoming@zju.edu.cnSigned-off-by:
-
Oliver Neukum authored
usbnet_write_cmd_async() mixed up which buffers need to be freed in which error case. v2: add Fixes tag v3: fix uninitialized buf pointer Fixes: 877bd862 ("usbnet: introduce usbnet 3 command helpers") Signed-off-by:
Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220705125351.17309-1-oneukum@suse.comSigned-off-by:
-
- 06 Jul, 2022 18 commits
-
-
Maxim Mikityanskiy authored
TX doorbells may be postponed, because sometimes the driver knows that another packet follows (for example, when xmit_more is true, or when a MPWQE session is closed before transmitting a packet). However, the DMA mapping may fail for the next packet, in which case a new WQE is not posted, the doorbell isn't updated either, and the transmission of the previous packet will be delayed indefinitely. This commit fixes the described rare error flow by posting a NOP and ringing the doorbell on errors to flush all the previous packets. The MPWQE session is closed before that. DMA mapping in the MPWQE flow is moved to the beginning of mlx5e_sq_xmit_mpwqe, because empty sessions are not allowed. Stop room always has enough space for a NOP, because the actual TX WQE is not posted. Fixes: e586b3b0 ("net/mlx5: Ethernet Datapath files") Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Gal Pressman authored
The existing capability check for vnic env counters only checks for receive steering discards, although we need the counters update for the exposed internal queue oob counter as well. This could result in the latter counter not being updated correctly when the receive steering discards counter is not supported. Fix that by checking whether any counter is supported instead of only the steering counter capability. Fixes: 0cfafd4b ("net/mlx5e: Add device out of buffer counter") Signed-off-by:
Gal Pressman <gal@nvidia.com> Reviewed-by:
-
Roi Dayan authored
Allocate a ct priv workqueue instead of using mlx5e priv one so flushing will only be of related CT entries. Also move flushing of the workqueue before rhashtable destroy otherwise entries won't be valid. Fixes: b069e14f ("net/mlx5e: CT: Fix queued up restore put() executing after relevant ft release") Signed-off-by:
Roi Dayan <roid@nvidia.com> Reviewed-by:
Oz Shlomo <ozsh@nvidia.com> Signed-off-by:
-
Liu, Changcheng authored
mode & mode_flags is updated at the end of mlx5_activate_lag which may not reflect the actual mode as shown in below logic: mlx5_activate_lag(struct mlx5_lag *ldev, |-- unsigned long flags = 0; |-- err = mlx5_lag_set_flags(ldev, mode, tracker, shared_fdb, &flags); |-- err = mlx5_create_lag(ldev, tracker, mode, flags); |-- mlx5_get_str_port_sel_mode(ldev); |-- ldev->mode = mode; |-- ldev->mode_flags = flags; Use mode & flag as parameters to get port select mode info. Fixes: 94db3317 ("net/mlx5: Support multiport eswitch mode") Signed-off-by:Liu, Changcheng <jerrliu@nvidia.com> Reviewed-by:
Eli Cohen <elic@nvidia.com> Reviewed-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
-
Paul Blakey authored
There is a total of four 4M entries flow tables. In sriov disabled mode, ct, ct_nat and post_act take three of them. When adding the first tc nic rule in this mode, it will take another 4M table for the tc <chain,prio> table. If user then enables sriov, the legacy flow table tries to take another 4M and fails, and so enablement fails. To fix that, have legacy fdb take the next available maximum size from the fs ft pool. Fixes: 4a98544d ("net/mlx5: Move chains ft pool to be used by all firmware steering") Signed-off-by:
Paul Blakey <paulb@nvidia.com> Reviewed-by:
-
Tariq Toukan authored
Use the correct constant (TLS_DRIVER_STATE_SIZE_RX) in the comparison against the size of the private RX TLS driver context. Fixes: 1182f365 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Signed-off-by:
-
Tariq Toukan authored
Use the correct constant (TLS_DRIVER_STATE_SIZE_TX) in the comparison against the size of the private TX TLS driver context. Fixes: df8d8667 ("net/mlx5e: kTLS, Use kernel API to extract private offload context") Signed-off-by:
-
Mark Bloch authored
Multiport eswitch is required to use native FDB selection instead of affinity, This was achieved by passing the shared_fdb flag down the HW lag creation path. While it did accomplish the goal of setting FDB selection mode to native, it had the side effect of also creating a shared FDB configuration. This created a few issues: - TC rules are inserted into a non active FDB, which means traffic isn't offloaded as all traffic will reach only a single FDB. - All wire traffic is treated as if a single physical port received it; while this is true for a bond configuration, this shouldn't be the case for multiport eswitch. Create a new flag MLX5_LAG_MODE_FLAG_FDB_SEL_MODE_NATIVE to indicate what FDB selection mode should be used. Fixes: 94db3317 ("net/mlx5: Support multiport eswitch mode") Signed-off-by:
-
Eli Cohen authored
Redirecting traffic from uplink to a VF is a legal operation of mulitport eswitch mode. Remove the limitation. Fixes: 94db3317 ("net/mlx5: Support multiport eswitch mode") Signed-off-by:
Maor Dickman <maord@nvidia.com> Reviewed-by:
-
https://github.com/openrisc/linuxLinus Torvalds authored
Pull OpenRISC fixes from Stafford Horne: "Fixups for OpenRISC found during recent testing: - An OpenRISC irqchip fix to stop acking level interrupts which was causing issues on SMP platforms - A comment typo fix in our unwinder code" * tag 'for-linus' of https://github.com/openrisc/linux: openrisc: unwinder: Fix grammar issue in comment irqchip: or1k-pic: Undefine mask_ack for level triggered hardware -
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This became largish as it includes the pending ASoC fixes. Almost all changes are device-specific small fixes, while many of them are coverage for mixer issues that were detected by selftest. In addition, usual suspects for HD/USB-audio are there" * tag 'sound-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (43 commits) ALSA: cs46xx: Fix missing snd_card_free() call at probe error ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0) ALSA: usb-audio: Add quirk for Fiero SC-01 ALSA: hda/realtek: Add quirk for Clevo L140PU ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices ASoC: madera: Fix event generation for rate controls ASoC: madera: Fix event generation for OUT1 demux ASoC: cs47l15: Fix event generation for low power mux control ASoC: cs35l41: Add ASP TX3/4 source to register patch ASoC: dapm: Initialise kcontrol data for mux/demux controls ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error ASoC: cs35l41: Correct some control names ASoC: wm5110: Fix DRE control ASoC: wm_adsp: Fix event for preloader MAINTAINERS: update ASoC Qualcomm maintainer email-id ASoC: rockchip: i2s: switch BCLK to GPIO ASoC: SOF: Intel: disable IMR boot when resuming from ACPI S4 and S5 states ASoC: SOF: pm: add definitions for S4 and S5 states ASoC: SOF: pm: add explicit behavior for ACPI S1 and S2 ASoC: SOF: Intel: hda: Fix compressed stream position tracking ...
-
Gal Pressman authored
This reverts commit 284b4d93. When using TLS device offload and coming from tls_device_reencrypt() flow, -EBADMSG error in tls_do_decryption() should not be counted towards the TLSTlsDecryptError counter. Move the counter increase back to the decrypt_internal() call site in decrypt_skb_update(). This also fixes an issue where: if (n_sgin < 1) return -EBADMSG; Errors in decrypt_internal() were not counted after the cited patch. Fixes: 284b4d93 ("tls: rx: move counting TlsDecryptErrors for sync") Cc: Jakub Kicinski <kuba@kernel.org> Reviewed-by:
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Path manager fixes for 5.19 The MPTCP userspace path manager is new in 5.19, and these patches fix some issues in that new code. Patches 1-3 fix path manager locking issues. Patches 4 and 5 allow userspace path managers to change priority of established subflows using the existing MPTCP_PM_CMD_SET_FLAGS generic netlink command. Includes corresponding self test update. Patches 6 and 7 fix accounting of available endpoint IDs and the MPTCP_MIB_RMSUBFLOW counter. ==================== Signed-off-by: -
Geliang Tang authored
This patch increases MPTCP_MIB_RMSUBFLOW mib counter in userspace pm destroy subflow function mptcp_nl_cmd_sf_destroy() when removing subflow. Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment") Signed-off-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
In mptcp_pm_nl_rm_addr_or_subflow() we always mark as available the id corresponding to the just removed address. The used bitmap actually tracks only the local IDs: we must restrict the operation when a (local) subflow is removed. Fixes: a88c9e49 ("mptcp: do not block subflows creation on errors") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Kishen Maloor authored
This change updates the testing sample (pm_nl_ctl) to exercise the updated MPTCP_PM_CMD_SET_FLAGS command for userspace PMs to issue MP_PRIO signals over the selected subflow. E.g. ./pm_nl_ctl set 10.0.1.2 port 47234 flags backup token 823274047 rip 10.0.1.1 rport 50003 userspace_pm.sh has a new selftest that invokes this command. Fixes: 259a834f ("selftests: mptcp: functional tests for the userspace PM type") Acked-by:
Kishen Maloor <kishen.maloor@intel.com> Signed-off-by:
-
Kishen Maloor authored
This change updates MPTCP_PM_CMD_SET_FLAGS to allow userspace PMs to issue MP_PRIO signals over a specific subflow selected by the connection token, local and remote address+port. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/286 Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment") Acked-by:
-
Mat Martineau authored
When setting up a subflow's flags for sending MP_PRIO MPTCP options, the subflow socket lock was not held while reading and modifying several struct members that are also read and modified in mptcp_write_options(). Acquire the subflow socket lock earlier and send the MP_PRIO ACK with that lock already acquired. Add a new variant of the mptcp_subflow_send_ack() helper to use with the subflow lock held. Fixes: 06706542 ("mptcp: add the outgoing MP_PRIO support") Acked-by:
-
