- 14 Jul, 2020 40 commits
-
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit e55f3c37 ] If this is in "transceiver" mode the the ->qwork isn't required and is a NULL pointer. This can lead to a NULL dereference when we call destroy_workqueue(udc->qwork). Fixes: 3517c31a ("usb: gadget: mv_udc: use devm_xxx for probe") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
yu kuai authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 586745f1 ] if of_find_device_by_node() succeed, imx_suspend_alloc_ocram() doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation. Fixes: 1579c7b9 ("ARM: imx53: Set DDR pins to high impedance when in suspend to RAM.") Signed-off-by:
yu kuai <yukuai3@huawei.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Fan Guo authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit a17f4bed ] If ib_dma_mapping_error() returns non-zero value, ib_mad_post_receive_mads() will jump out of loops and return -ENOMEM without freeing mad_priv. Fix this memory-leak problem by freeing mad_priv in this case. Fixes: 2c34e68f ("IB/mad: Check and handle potential DMA mapping errors") Link: https://lore.kernel.org/r/20200612063824.180611-1-guofan5@huawei.comSigned-off-by:
Fan Guo <guofan5@huawei.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Qiushi Wu authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 4ddf4739 ] kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb7183" fixed a similar problem. Fixes: 0bb54905 ("efi: Add esrt support") Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Link: https://lore.kernel.org/r/20200528183804.4497-1-wu000273@umn.eduSigned-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
-
Zhang Xiaoxu authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 6b690402 ] CIFS implements the fallocate(FALLOC_FL_ZERO_RANGE) with send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the remote file to zero, but local page cache not update, then the data inconsistent with server, which leads the xfstest generic/008 failed. So we need to remove the local page caches before send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. After next read, it will re-cache it. Fixes: 30175628 ("[SMB3] Enable fallocate -z support for SMB3 mounts") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Cc: stable@vger.kernel.org # v3.17 Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Zhang Xiaoxu authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit acc91c2d ] When punch hole success, we also can read old data from file: # strace -e trace=pread64,fallocate xfs_io -f -c "pread 20 40" \ -c "fpunch 20 40" -c"pread 20 40" file pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40 fallocate(3, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 20, 40) = 0 pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40 CIFS implements the fallocate(FALLOCATE_FL_PUNCH_HOLE) with send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the remote file to zero, but local page caches not updated, then the local page caches inconsistent with server. Also can be found by xfstests generic/316. So, we need to remove the page caches before send the SMB ioctl(FSCTL_SET_ZERO_DATA) to server. Fixes: 31742c5a ("enable fallocate punch hole ("fallocate -p") for SMB3") Suggested-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit b3d71abd ] USB2 devices with LPM enabled may interrupt the system suspend: [ 932.510475] usb 1-7: usb suspend, wakeup 0 [ 932.510549] hub 1-0:1.0: hub_suspend [ 932.510581] usb usb1: bus suspend, wakeup 0 [ 932.510590] xhci_hcd 0000:00:14.0: port 9 not suspended [ 932.510593] xhci_hcd 0000:00:14.0: port 8 not suspended .. [ 932.520323] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400e03 .. [ 932.591405] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16 [ 932.591414] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -16 [ 932.591418] PM: Device 0000:00:14.0 failed to suspend async: error -16 During system suspend, USB core will let HC suspends the device if it doesn't have remote wakeup enabled and doesn't have any children. However, from the log above we can see that the usb 1-7 doesn't get bus suspended due to not in U0. After a while the port finished U2 -> U0 transition, interrupts the suspend process. The observation is that after disabling LPM, port doesn't transit to U0 immediately and can linger in U2. xHCI spec 4.23.5.2 states that the maximum exit latency for USB2 LPM should be BESL + 10us. The BESL for the affected device is advertised as 400us, which is still not enough based on my testing result. So let's use the maximum permitted latency, 10000, to poll for U0 status to solve the issue. Cc: stable@vger.kernel.org Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200624135949.22611-6-mathias.nyman@linux.intel.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 220345e9 ] The USB-audio mixer code holds a linked list of usb_mixer_elem_list, and several operations are performed for each mixer element. A few of them (snd_usb_mixer_notify_id() and snd_usb_mixer_interrupt_v2()) assume each mixer element being a usb_mixer_elem_info object that is a subclass of usb_mixer_elem_list, cast via container_of() and access it members. This may result in an out-of-bound access when a non-standard list element has been added, as spotted by syzkaller recently. This patch adds a new field, is_std_info, in usb_mixer_elem_list to indicate that the element is the usb_mixer_elem_info type or not, and skip the access to such an element if needed. Reported-by: syzbot+fb14314433463ad51625@syzkaller.appspotmail.com Reported-by: syzbot+2405ca3401e943c538b5@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200624122340.9615-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 8c558076 ] Introduce a new macro for iterating over mixer element list for avoiding the open codes in many places. Also the open-coded container_of() and the forced cast to struct usb_mixer_elem_info are replaced with another simple macro, too. No functional changes but just readability improvement. Signed-off-by:
-
Daniel Mack authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 191227d9 ] miniDSP USBStreamer UAC2 devices send clock validity changes with the control field set to zero. The current interrupt handler ignores all packets if the control field does not match the mixer element's, but it really should only do that in case that field is needed to distinguish multiple elements with the same ID. This patch implements a logic that lets notifications packets pass if the element ID is unique for a given device. Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
-
Julian Scheel authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit b2500b58 ] When an interrupt occurs, the value of at least one of the belonging controls should have changed. To make sure they get re-read from device on the next read, invalidate the cache. This was correctly implemented for uac2 already, but missing for uac1. Signed-off-by:
Julian Scheel <julian@jusst.de> Signed-off-by:
-
Joakim Tjernlund authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 03894573 upstream. USB_DEVICE(0x0424, 0x274e) can send data before cdc_acm is ready, causing garbage chars on the TTY causing stray input to the shell and/or login prompt. Signed-off-by:
Joakim Tjernlund <joakim.tjernlund@infinera.com> Cc: stable@vger.kernel.org Acked-by:
Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20200605105418.22263-1-joakim.tjernlund@infinera.comSigned-off-by:
-
Al Cooper authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit a73d9d9c upstream. Unable to complete the enumeration of a USB TV Tuner device. Per XHCI spec (4.6.5), the EP state field of the input context shall be cleared for a set address command. In the special case of an FS device that has "MaxPacketSize0 = 8", the Linux XHCI driver does not do this before evaluating the context. With an XHCI controller that checks the EP state field for parameter context error this causes a problem in cases such as the device getting reset again after enumeration. When that field is cleared, the problem does not occur. This was found and fixed by Sasi Kumar. Cc: stable@vger.kernel.org Signed-off-by:
Al Cooper <alcooperx@gmail.com> Signed-off-by:
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit dceea670 upstream. EP_STATE_MASK should be 0x7 instead of 0xf xhci spec 6.2.3 shows that the EP state field in the endpoint context data structure consist of bits [2:0]. The old value included a bit from the next field which fortunately is a RsvdZ region. So hopefully this hasn't caused too much harm Cc: stable@vger.kernel.org Signed-off-by:
-
Yick W. Tse authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit c9808bbf upstream. fix error "clock source 41 is not valid, cannot use" [] New USB device found, idVendor=154e, idProduct=1002, bcdDevice= 1.00 [] New USB device strings: Mfr=1, Product=2, SerialNumber=0 [] Product: DCD-1500RE [] Manufacturer: D & M Holdings Inc. [] [] clock source 41 is not valid, cannot use [] usbcore: registered new interface driver snd-usb-audio Signed-off-by:
Yick W. Tse <y_w_tse@yahoo.com.hk> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1373857985.210365.1592048406997@mail.yahoo.comSigned-off-by:
-
Tang Bin authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 44ed240d upstream. If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ehci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 1bcc5aa8 ("USB: Add initial S5P EHCI driver") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20200602114708.28620-1-tangbin@cmss.chinamobile.comSigned-off-by:
-
Longfang Liu authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 1ddcb71a upstream. A Synopsys USB2.0 core used in Huawei Kunpeng920 SoC has a bug which might cause the host controller not issuing ping. Bug description: After indicating an Interrupt on Async Advance, the software uses the doorbell mechanism to delete the Next Link queue head of the last executed queue head. At this time, the host controller still references the removed queue head(the queue head is NULL). NULL reference causes the host controller to lose the USB device. Solution: After deleting the Next Link queue head, when has_synopsys_hc_bug set to 1，the software can write one of the valid queue head addresses to the ASYNCLISTADDR register to allow the host controller to get the valid queue head. in order to solve that problem, this patch set the flag for Huawei Kunpeng920 There are detailed instructions and solutions in this patch: commit 2f7ac6c1 ("USB: ehci: add workaround for Synopsys HC bug") Signed-off-by:
Longfang Liu <liulongfang@huawei.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/1591588019-44284-1-git-send-email-liulongfang@huawei.comSigned-off-by:
-
Dongdong Liu authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 72f2ff0d upstream. The PCIe Root Port in Hip06/Hip07 SoCs advertises an MSI capability, but it cannot generate MSIs. It can transfer MSI/MSI-X from downstream devices, but does not support MSI/MSI-X itself. Add a quirk to prevent use of MSI/MSI-X by the Root Port. [bhelgaas: changelog, sort vendor ID #define, drop device ID #define] Signed-off-by:
Dongdong Liu <liudongdong3@huawei.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Gabriele Paoloni <gabriele.paoloni@huawei.com> Reviewed-by:
Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by:
-
Tomasz Meresiński authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 5d802192 upstream. The Logitech C922, just like other Logitech webcams, needs the USB_QUIRK_DELAY_INIT or it will randomly not respond after device connection Signed-off-by:
Tomasz Meresiński <tomasz@meresinski.eu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200603203347.7792-1-tomasz@meresinski.euSigned-off-by:
-
Minas Harutyunyan authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 207324a3 upstream. During dwc2 driver probe, after gadget registration to the udc class driver, if exist any builtin function driver it immediately bound to dwc2 and after init host side (dwc2_hcd_init()) stucked in host mode. Patch postpone gadget registration after host side initialization done. Fixes: 117777b2 ("usb: dwc2: Move gadget probe function into platform code") Reported-by:
kbuild test robot <lkp@intel.com> Tested-by:
Marek Vasut <marex@denx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/f21cb38fecc72a230b86155d94c7e60c9cb66f58.1591690938.git.hminas@synopsys.comSigned-off-by:
-
Chuhong Yuan authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 07c112fb upstream. This driver misses calling iounmap() in remove to undo the ioremap() called in probe. Add the missed call to fix it. Fixes: f54aab6e ("usb: ohci-sm501 driver") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Acked-by:
-
Wang Hai authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit ea2fce88 ] Commit a84d0164 ("mld: fix memory leak in mld_del_delrec()") fixed the memory leak of MLD, but missing the ipv6_mc_destroy_dev() path, in which mca_sources are leaked after ma_put(). Using ip6_mc_clear_src() to take care of the missing free. BUG: memory leak unreferenced object 0xffff8881113d3180 (size 64): comm "syz-executor071", pid 389, jiffies 4294887985 (age 17.943s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 ff 02 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 ................ backtrace: [<000000002cbc483c>] kmalloc include/linux/slab.h:555 [inline] [<000000002cbc483c>] kzalloc include/linux/slab.h:669 [inline] [<000000002cbc483c>] ip6_mc_add1_src net/ipv6/mcast.c:2237 [inline] [<000000002cbc483c>] ip6_mc_add_src+0x7f5/0xbb0 net/ipv6/mcast.c:2357 [<0000000058b8b1ff>] ip6_mc_source+0xe0c/0x1530 net/ipv6/mcast.c:449 [<000000000bfc4fb5>] do_ipv6_setsockopt.isra.12+0x1b2c/0x3b30 net/ipv6/ipv6_sockglue.c:754 [<00000000e4e7a722>] ipv6_setsockopt+0xda/0x150 net/ipv6/ipv6_sockglue.c:950 [<0000000029260d9a>] rawv6_setsockopt+0x45/0x100 net/ipv6/raw.c:1081 [<000000005c1b46f9>] __sys_setsockopt+0x131/0x210 net/socket.c:2132 [<000000008491f7db>] __do_sys_setsockopt net/socket.c:2148 [inline] [<000000008491f7db>] __se_sys_setsockopt net/socket.c:2145 [inline] [<000000008491f7db>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2145 [<00000000c7bc11c5>] do_syscall_64+0xa1/0x530 arch/x86/entry/common.c:295 [<000000005fb7a3f3>] entry_SYSCALL_64_after_hwframe+0x49/0xb3 Fixes: 1666d49e ("mld: do not remove mld souce list info when set link down") Reported-by:
Wang Hai <wanghai38@huawei.com> Acked-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Taehee Yoo authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit fb7861d1 ] In the current code, ->ndo_start_xmit() can be executed recursively only 10 times because of stack memory. But, in the case of the vxlan, 10 recursion limit value results in a stack overflow. In the current code, the nested interface is limited by 8 depth. There is no critical reason that the recursion limitation value should be 10. So, it would be good to be the same value with the limitation value of nesting interface depth. Test commands: ip link add vxlan10 type vxlan vni 10 dstport 4789 srcport 4789 4789 ip link set vxlan10 up ip a a 192.168.10.1/24 dev vxlan10 ip n a 192.168.10.2 dev vxlan10 lladdr fc:22:33:44:55:66 nud permanent for i in {9..0} do let A=$i+1 ip link add vxlan$i type vxlan vni $i dstport 4789 srcport 4789 4789 ip link set vxlan$i up ip a a 192.168.$i.1/24 dev vxlan$i ip n a 192.168.$i.2 dev vxlan$i lladdr fc:22:33:44:55:66 nud permanent bridge fdb add fc:22:33:44:55:66 dev vxlan$A dst 192.168.$i.2 self done hping3 192.168.10.2 -2 -d 60000 Splat looks like: [ 103.814237][ T1127] ============================================================================= [ 103.871955][ T1127] BUG kmalloc-2k (Tainted: G B ): Padding overwritten. 0x00000000897a2e4f-0x000 [ 103.873187][ T1127] ----------------------------------------------------------------------------- [ 103.873187][ T1127] [ 103.874252][ T1127] INFO: Slab 0x000000005cccc724 objects=5 used=5 fp=0x0000000000000000 flags=0x10000000001020 [ 103.881323][ T1127] CPU: 3 PID: 1127 Comm: hping3 Tainted: G B 5.7.0+ #575 [ 103.882131][ T1127] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 103.883006][ T1127] Call Trace: [ 103.883324][ T1127] dump_stack+0x96/0xdb [ 103.883716][ T1127] slab_err+0xad/0xd0 [ 103.884106][ T1127] ? _raw_spin_unlock+0x1f/0x30 [ 103.884620][ T1127] ? get_partial_node.isra.78+0x140/0x360 [ 103.885214][ T1127] slab_pad_check.part.53+0xf7/0x160 [ 103.885769][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.886316][ T1127] check_slab+0x97/0xb0 [ 103.886763][ T1127] alloc_debug_processing+0x84/0x1a0 [ 103.887308][ T1127] ___slab_alloc+0x5a5/0x630 [ 103.887765][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.888265][ T1127] ? lock_downgrade+0x730/0x730 [ 103.888762][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.889244][ T1127] ? __slab_alloc+0x3e/0x80 [ 103.889675][ T1127] __slab_alloc+0x3e/0x80 [ 103.890108][ T1127] __kmalloc_node_track_caller+0xc7/0x420 [ ... ] Fixes: 11a766ce ("net: Increase xmit RECURSION_LIMIT to 10.") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Tariq Toukan authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 41b14fb8 ] Clearing the sock TX queue in sk_set_socket() might cause unexpected out-of-order transmit when called from sock_orphan(), as outstanding packets can pick a different TX queue and bypass the ones already queued. This is undesired in general. More specifically, it breaks the in-order scheduling property guarantee for device-offloaded TLS sockets. Remove the call to sk_tx_queue_clear() in sk_set_socket(), and add it explicitly only where needed. Fixes: e022f0b4 ("net: Introduce sk_tx_queue_mapping") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Reviewed-by:
Boris Pismenny <borisp@mellanox.com> Signed-off-by:
-
guodeqing authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 5eea3a63 ] ie., $ ifconfig eth0 6.6.6.6 netmask 255.255.255.0 $ ip rule add from 6.6.6.6 table 6666 $ ip route add 9.9.9.9 via 6.6.6.6 $ ping -I 6.6.6.6 9.9.9.9 PING 9.9.9.9 (9.9.9.9) from 6.6.6.6 : 56(84) bytes of data. 3 packets transmitted, 0 received, 100% packet loss, time 2079ms $ arp Address HWtype HWaddress Flags Mask Iface 6.6.6.6 (incomplete) eth0 The arp request address is error, this is because fib_table_lookup in fib_check_nh lookup the destnation 9.9.9.9 nexthop, the scope of the fib result is RT_SCOPE_LINK,the correct scope is RT_SCOPE_HOST. Here I add a check of whether this is RT_TABLE_MAIN to solve this problem. Fixes: 3bfd8472 ("net: Use passed in table for nexthop lookups") Signed-off-by:
guodeqing <geffrey.guo@huawei.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 471e39df ] If a socket is set ipv6only, it will still send IPv4 addresses in the INIT and INIT_ACK packets. This potentially misleads the peer into using them, which then would cause association termination. The fix is to not add IPv4 addresses to ipv6only sockets. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 66205121 ] Back in 2013, we made a change that broke fast retransmit for non SACK flows. Indeed, for these flows, a sender needs to receive three duplicate ACK before starting fast retransmit. Sending ACK with different receive window do not count. Even if enabling SACK is strongly recommended these days, there still are some cases where it has to be disabled. Not increasing the window seems better than having to rely on RTO. After the fix, following packetdrill test gives : // Initialize connection 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1000,nop,wscale 7> +0 > S. 0:0(0) ack 1 <mss 1460,nop,wscale 8> +0 < . 1:1(0) ack 1 win 514 +0 accept(3, ..., ...) = 4 +0 < . 1:1001(1000) ack 1 win 514 // Quick ack +0 > . 1:1(0) ack 1001 win 264 +0 < . 2001:3001(1000) ack 1 win 514 // DUPACK : Normally we should not change the window +0 > . 1:1(0) ack 1001 win 264 +0 < . 3001:4001(1000) ack 1 win 514 // DUPACK : Normally we should not change the window +0 > . 1:1(0) ack 1001 win 264 +0 < . 4001:5001(1000) ack 1 win 514 // DUPACK : Normally we should not change the window +0 > . 1:1(0) ack 1001 win 264 +0 < . 1001:2001(1000) ack 1 win 514 // Hole is repaired. +0 > . 1:1(0) ack 5001 win 272 Fixes: 4e4f1fc2 ("tcp: properly increase rcv_ssthresh for ofo packets") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Taehee Yoo authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit dafabb65 ] In the datapath, the ip6gre_tunnel_lookup() is used and it internally uses fallback tunnel device pointer, which is fb_tunnel_dev. This pointer variable should be set to NULL when a fb interface is deleted. But there is no routine to set fb_tunnel_dev pointer to NULL. So, this pointer will be still used after interface is deleted and it eventually results in the use-after-free problem. Test commands: ip netns add A ip netns add B ip link add eth0 type veth peer name eth1 ip link set eth0 netns A ip link set eth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set eth0 up ip netns exec A ip link add ip6gre1 type ip6gre local fc:0::1 \ remote fc:0::2 ip netns exec A ip -6 a a fc:100::1/64 dev ip6gre1 ip netns exec A ip link set ip6gre1 up ip netns exec A ip -6 a a fc:0::1/64 dev eth0 ip netns exec A ip link set ip6gre0 up ip netns exec B ip link set lo up ip netns exec B ip link set eth1 up ip netns exec B ip link add ip6gre1 type ip6gre local fc:0::2 \ remote fc:0::1 ip netns exec B ip -6 a a fc:100::2/64 dev ip6gre1 ip netns exec B ip link set ip6gre1 up ip netns exec B ip -6 a a fc:0::2/64 dev eth1 ip netns exec B ip link set ip6gre0 up ip netns exec A ping fc:100::2 -s 60000 & ip netns del B Splat looks like: [ 73.087285][ C1] BUG: KASAN: use-after-free in ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.088361][ C1] Read of size 4 at addr ffff888040559218 by task ping/1429 [ 73.089317][ C1] [ 73.089638][ C1] CPU: 1 PID: 1429 Comm: ping Not tainted 5.7.0+ #602 [ 73.090531][ C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 73.091725][ C1] Call Trace: [ 73.092160][ C1] <IRQ> [ 73.092556][ C1] dump_stack+0x96/0xdb [ 73.093122][ C1] print_address_description.constprop.6+0x2cc/0x450 [ 73.094016][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.094894][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.095767][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.096619][ C1] kasan_report+0x154/0x190 [ 73.097209][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.097989][ C1] ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.098750][ C1] ? gre_del_protocol+0x60/0x60 [gre] [ 73.099500][ C1] gre_rcv+0x1c5/0x1450 [ip6_gre] [ 73.100199][ C1] ? ip6gre_header+0xf00/0xf00 [ip6_gre] [ 73.100985][ C1] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 73.101830][ C1] ? ip6_input_finish+0x5/0xf0 [ 73.102483][ C1] ip6_protocol_deliver_rcu+0xcbb/0x1510 [ 73.103296][ C1] ip6_input_finish+0x5b/0xf0 [ 73.103920][ C1] ip6_input+0xcd/0x2c0 [ 73.104473][ C1] ? ip6_input_finish+0xf0/0xf0 [ 73.105115][ C1] ? rcu_read_lock_held+0x90/0xa0 [ 73.105783][ C1] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 73.106548][ C1] ipv6_rcv+0x1f1/0x300 [ ... ] Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by:
-
Neal Cardwell authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit b344579c ] Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an ACK when the minimum rtt of a connection goes down. From inspection it is clear from the existing code that this could happen in an example like the following: o The first 8 RTT samples in a round trip are 150ms, resulting in a curr_rtt of 150ms and a delay_min of 150ms. o The 9th RTT sample is 100ms. The curr_rtt does not change after the first 8 samples, so curr_rtt remains 150ms. But delay_min can be lowered at any time, so delay_min falls to 100ms. The code executes the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min of 100ms, and the curr_rtt is declared far enough above delay_min to force a (spurious) exit of Slow start. The fix here is simple: allow every RTT sample in a round trip to lower the curr_rtt. Fixes: ae27e98a ("[TCP] CUBIC v2.3") Reported-by:
Mirja Kuehlewind <mirja.kuehlewind@ericsson.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Taehee Yoo authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit ba61539c ] In the datapath, the ip_tunnel_lookup() is used and it internally uses fallback tunnel device pointer, which is fb_tunnel_dev. This pointer variable should be set to NULL when a fb interface is deleted. But there is no routine to set fb_tunnel_dev pointer to NULL. So, this pointer will be still used after interface is deleted and it eventually results in the use-after-free problem. Test commands: ip netns add A ip netns add B ip link add eth0 type veth peer name eth1 ip link set eth0 netns A ip link set eth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set eth0 up ip netns exec A ip link add gre1 type gre local 10.0.0.1 \ remote 10.0.0.2 ip netns exec A ip link set gre1 up ip netns exec A ip a a 10.0.100.1/24 dev gre1 ip netns exec A ip a a 10.0.0.1/24 dev eth0 ip netns exec B ip link set lo up ip netns exec B ip link set eth1 up ip netns exec B ip link add gre1 type gre local 10.0.0.2 \ remote 10.0.0.1 ip netns exec B ip link set gre1 up ip netns exec B ip a a 10.0.100.2/24 dev gre1 ip netns exec B ip a a 10.0.0.2/24 dev eth1 ip netns exec A hping3 10.0.100.2 -2 --flood -d 60000 & ip netns del B Splat looks like: [ 77.793450][ C3] ================================================================== [ 77.794702][ C3] BUG: KASAN: use-after-free in ip_tunnel_lookup+0xcc4/0xf30 [ 77.795573][ C3] Read of size 4 at addr ffff888060bd9c84 by task hping3/2905 [ 77.796398][ C3] [ 77.796664][ C3] CPU: 3 PID: 2905 Comm: hping3 Not tainted 5.8.0-rc1+ #616 [ 77.797474][ C3] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 77.798453][ C3] Call Trace: [ 77.798815][ C3] <IRQ> [ 77.799142][ C3] dump_stack+0x9d/0xdb [ 77.799605][ C3] print_address_description.constprop.7+0x2cc/0x450 [ 77.800365][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.800908][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.801517][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.802145][ C3] kasan_report+0x154/0x190 [ 77.802821][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.803503][ C3] ip_tunnel_lookup+0xcc4/0xf30 [ 77.804165][ C3] __ipgre_rcv+0x1ab/0xaa0 [ip_gre] [ 77.804862][ C3] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 77.805621][ C3] gre_rcv+0x304/0x1910 [ip_gre] [ 77.806293][ C3] ? lock_acquire+0x1a9/0x870 [ 77.806925][ C3] ? gre_rcv+0xfe/0x354 [gre] [ 77.807559][ C3] ? erspan_xmit+0x2e60/0x2e60 [ip_gre] [ 77.808305][ C3] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 77.809032][ C3] ? rcu_read_lock_held+0x90/0xa0 [ 77.809713][ C3] gre_rcv+0x1b8/0x354 [gre] [ ... ] Suggested-by:
-
David Christensen authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 3a2656a2 ] The driver function tg3_io_error_detected() calls napi_disable twice, without an intervening napi_enable, when the number of EEH errors exceeds eeh_max_freezes, resulting in an indefinite sleep while holding rtnl_lock. Add check for pcierr_recovery which skips code already executed for the "Frozen" state. Signed-off-by:
David Christensen <drc@linux.vnet.ibm.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Jeremy Kerr authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit e869e7a1 ] Using a AX88179 device (0b95:1790), I see two bytes of appended data on every RX packet. For example, this 48-byte ping, using 0xff as a payload byte: 04:20:22.528472 IP 192.168.1.1 > 192.168.1.2: ICMP echo request, id 2447, seq 1, length 64 0x0000: 000a cd35 ea50 000a cd35 ea4f 0800 4500 0x0010: 0054 c116 4000 4001 f63e c0a8 0101 c0a8 0x0020: 0102 0800 b633 098f 0001 87ea cd5e 0000 0x0030: 0000 dcf2 0600 0000 0000 ffff ffff ffff 0x0040: ffff ffff ffff ffff ffff ffff ffff ffff 0x0050: ffff ffff ffff ffff ffff ffff ffff ffff 0x0060: ffff 961f Those last two bytes - 96 1f - aren't part of the original packet. In the ax88179 RX path, the usbnet rx_fixup function trims a 2-byte 'alignment pseudo header' from the start of the packet, and sets the length from a per-packet field populated by hardware. It looks like that length field *includes* the 2-byte header; the current driver assumes that it's excluded. This change trims the 2-byte alignment header after we've set the packet length, so the resulting packet length is correct. While we're moving the comment around, this also fixes the spelling of 'pseudo'. Signed-off-by:
Jeremy Kerr <jk@ozlabs.org> Signed-off-by:
-
Yang Yingliang authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 814152a8 ] I got a memleak report when doing some fuzz test: unreferenced object 0xffff888112584000 (size 13599): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 32 bytes): 74 61 70 30 00 00 00 00 00 00 00 00 00 00 00 00 tap0............ 00 ee d9 19 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<000000002f60ba65>] __kmalloc_node+0x309/0x3a0 [<0000000075b211ec>] kvmalloc_node+0x7f/0xc0 [<00000000d3a97396>] alloc_netdev_mqs+0x76/0xfc0 [<00000000609c3655>] __tun_chr_ioctl+0x1456/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff888111845cc0 (size 8): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 8 bytes): 74 61 70 30 00 88 ff ff tap0.... backtrace: [<000000004c159777>] kstrdup+0x35/0x70 [<00000000d8b496ad>] kstrdup_const+0x3d/0x50 [<00000000494e884a>] kvasprintf_const+0xf1/0x180 [<0000000097880a2b>] kobject_set_name_vargs+0x56/0x140 [<000000008fbdfc7b>] dev_set_name+0xab/0xe0 [<000000005b99e3b4>] netdev_register_kobject+0xc0/0x390 [<00000000602704fe>] register_netdevice+0xb61/0x1250 [<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff88811886d800 (size 512): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff c0 66 3d a3 ff ff ff ff .........f=..... backtrace: [<0000000050315800>] device_add+0x61e/0x1950 [<0000000021008dfb>] netdev_register_kobject+0x17e/0x390 [<00000000602704fe>] register_netdevice+0xb61/0x1250 [<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 If call_netdevice_notifiers() failed, then rollback_registered() calls netdev_unregister_kobject() which holds the kobject. The reference cannot be put because the netdev won't be add to todo list, so it will leads a memleak, we need put the reference to avoid memleak. Reported-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 9d964e1b ] lost npc in PTRACE_SETREGSET, breaking PTRACE_SETREGS as well Fixes: cf51e129 "sparc32: fix register window handling in genregs32_[gs]et()" Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Valentin Longchamp authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 1a3db27a ] Since the quiesce/activate rework, __netdev_watchdog_up() is directly called in the ucc_geth driver. Unfortunately, this function is not available for modules and thus ucc_geth cannot be built as a module anymore. Fix it by exporting __netdev_watchdog_up(). Since the commit introducing the regression was backported to stable branches, this one should ideally be as well. Fixes: 79dde73c ("net/ethernet/freescale: rework quiesce/activate for ucc_geth") Signed-off-by:
Valentin Longchamp <valentin@longchamp.me> Signed-off-by:
-
Ridge Kennedy authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 0d0d9a38 upstream. In the past it was possible to create multiple L2TPv3 sessions with the same session id as long as the sessions belonged to different tunnels. The resulting sessions had issues when used with IP encapsulated tunnels, but worked fine with UDP encapsulated ones. Some applications began to rely on this behaviour to avoid having to negotiate unique session ids. Some time ago a change was made to require session ids to be unique across all tunnels, breaking the applications making use of this "feature". This change relaxes the duplicate session id check to allow duplicates if both of the colliding sessions belong to UDP encapsulated tunnels. Fixes: dbdbc73b ("l2tp: fix duplicate session creation") Signed-off-by:
Ridge Kennedy <ridge.kennedy@alliedtelesis.co.nz> Acked-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Martin Wilck authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit ba69ead9 upstream. devinfo->vendor and devinfo->model aren't necessarily zero-terminated. Fixes: b8018b97 "scsi_devinfo: fixup string compare" Signed-off-by:
Martin Wilck <mwilck@suse.com> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Toke Høiland-Jørgensen authored
BugLink: https://bugs.launchpad.net/bugs/1885932 This reverts commit 191cf872190de28a92e1bd2b56d8860e37e07443 which is commit 695b4ec0 upstream. That commit should never have been backported since it relies on a change in locking semantics that was introduced in v4.8 and not backported. Because of this, the backported commit to sch_fq leads to lockups because of the double locking. Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Ahmed S. Darwish authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 11d6011c ] Sequence counters write paths are critical sections that must never be preempted, and blocking, even for CONFIG_PREEMPTION=n, is not allowed. Commit 5dbe7c17 ("net: fix kernel deadlock with interface rename and netdev name retrieval.") handled a deadlock, observed with CONFIG_PREEMPTION=n, where the devnet_rename seqcount read side was infinitely spinning: it got scheduled after the seqcount write side blocked inside its own critical section. To fix that deadlock, among other issues, the commit added a cond_resched() inside the read side section. While this will get the non-preemptible kernel eventually unstuck, the seqcount reader is fully exhausting its slice just spinning -- until TIF_NEED_RESCHED is set. The fix is also still broken: if the seqcount reader belongs to a real-time scheduling policy, it can spin forever and the kernel will livelock. Disabling preemption over the seqcount write side critical section will not work: inside it are a number of GFP_KERNEL allocations and mutex locking through the drivers/base/ :: device_rename() call chain. >From all the above, replace the seqcount with a rwsem. Fixes: 5dbe7c17 (net: fix kernel deadlock with interface rename and netdev name retrieval.) Fixes: 30e6c9fa (net: devnet_rename_seq should be a seqcount) Fixes: c91f6df2 (sockopt: Change getsockopt() of SO_BINDTODEVICE to return an interface name) Cc: <stable@vger.kernel.org> Reported-by: kbuild test robot <lkp@intel.com> [ v1 missing up_read() on error exit ] Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [ v1 missing up_read() on error exit ] Signed-off-by:
Ahmed S. Darwish <a.darwish@linutronix.de> Reviewed-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 2da2b32f ] CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Update the comment to use CONFIG_PREEMPTION. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
