- 02 Apr, 2021 1 commit
-
-
Gwan-gyeong Mun authored
Due to the changed sequence of activating/deactivating DC3CO, disable DC3CO until the changed dc3co activating/deactivating sequence is applied. References: https://gitlab.freedesktop.org/drm/intel/-/issues/3134Signed-off-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
- 01 Apr, 2021 3 commits
-
-
Imre Deak authored
We need to wait for the DMC FW loader work to complete during shutdown, even if it's unlikely to be still pending by that time, fix this. This also fixes the wakeref tracking WARN during shutdown about the leaked reference we hold due to a missing DMC firmware. While at it add a TODO comment about unifying the shutdown and PM power-off sequences and later these sequences with the driver remove and system/runtime suspend sequences. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> References: https://lore.kernel.org/lkml/20210303055517.GB2708@xsang-OptiPlex-9020Reported-and-tested-by:
kernel test robot <oliver.sang@intel.com> Reported-and-tested-by:
Edward Baker <edward.baker@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210311144529.3059024-1-imre.deak@intel.com
-
Ville Syrjälä authored
According to bspec icl+ no longer need any extra cdclk guardband for 64bpp formats. Make it so. Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Split the glk+ stuff into it's own version of the .min_cdclk() vfunc. Signed-off-by:
-
- 31 Mar, 2021 5 commits
-
-
Imre Deak authored
Fix the Documentation/gpu/i915:22: /drivers/gpu/drm/i915/intel_runtime_pm.c:423: WARNING: Inline strong start-string without end-string. warning from the htmldocs build. Fixes: 9d58aa46 ("drm/i915: Fix the GT fence revocation runtime PM logic") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20210330150118.1105079-1-imre.deak@intel.com
-
Anshuman Gupta authored
Fix LC_Send_L_Prime message timeout to 16 as documented in DP HDCP 2.2 errata page 3. https://www.digital-cp.com/sites/default/files/HDCP%202_2_DisplayPort_Errata_v3_0.pdf Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Anshuman Gupta authored
As documented in HDCP 2.2 DP Errata spec transmitter should abort the authentication protocol in case transmitter has not received the entire {AKE_Send_Cert, AKE_Send_H_prime, AKE_Send_Paring_Info} msg within {110,7,5} miliseconds. Adding above msg timeout values and aborting the HDCP authentication in case it timedout to read entire msg. https://www.digital-cp.com/sites/default/files/HDCP%202_2_DisplayPort_Errata_v3_0.pdf v2: - Removed redundant variable msg_can_timedout. [Ankit] Cc: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: -
Ankit Nautiyal authored
Add the check if source control mode is supported by the PCON, before starting configuring PCON for FRL training, as per spec VESA DP2.0-HDMI2.1 PCON Draft-1 Sec-7. v2: Added spec details for the change. (Uma) Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Ankit Nautiyal authored
Currently the FRL training mode (Concurrent, Sequential) and training type (Normal, Extended) are not defined properly and are passed as bool values in drm_helpers for pcon configuration for FRL training. This patch: -Add register masks for Sequential and Normal FRL training options. -Fixes the drm_helpers for FRL Training configuration to use the appropriate masks. -Modifies the calls to the above drm_helpers in i915/intel_dp as per the above change. v2: Re-used the register masks for these options, instead of enum. (Ville) Signed-off-by:
-
- 29 Mar, 2021 31 commits
-
-
Imre Deak authored
Add selftests to test the POT stride padding functionality added in the previous patch. Signed-off-by:
-
Imre Deak authored
An upcoming platform has a restriction that the FB stride must be power-of-two aligned. To support framebuffer layouts that are not in this layout add a logic that pads the tile rows to the POT aligned size. The HW won't read the padding PTEs, so these don't have to point to an allocated address, or even have their valid flag set. So use a NULL PTE instead for instance the scratch page, which is simple and keeps the SG table compact. v2: - Simplify plane_view_dst_stride(). (Ville) - Pass pitch_tiles as unsigned int. v3: - Drop unintentional s/plane_state->rotation/plane_config->rotation/ change. Signed-off-by:
-
Imre Deak authored
An upcoming patch adds a new dst_stride field to the intel_remapped_plane_info struct, so for clarity rename the current stride field to src_stride. Signed-off-by:
-
Imre Deak authored
Always use the modified copy of the intel_remapped_plane_info variables. An upcoming patch updates the dst_stride field in these copies after which we can't use the original versions. v2: Init view in igt_vma_rotate_remap() when declaring it. (Ville) Signed-off-by:
-
Imre Deak authored
Save some place in the GTT VMAs by using a u16 instead of unsigned int to store the view dimensions. The maximum FB stride is 256kB which is 4096 tiles in the worst case (yf-tiles), the maximum FB height is 16k pixels, which is 16384 tiles in the worst case (linear 4x1 tiled FB). v2: - Fix worst case tile height formula in commit log. (Ville) - Add an assign_chk_ovf helper to simplify the related assignments. v3: - Enclose params of the assign_chk_ovf macro in parentheses. Signed-off-by:
-
Imre Deak authored
Factor out to a new function the logic to calculate the FB remapping parameters both during creating the FB and when flipping to it. v2: - Keep stride next to offset calculation. (Ville) - Enclose check_array_bounds macro arguments in parentheses. v3: - Rebase on top of the struct intel_fb_view refactoring. Signed-off-by:
-
Imre Deak authored
Instead of copying separately the GTT remapped and color plane view info from the FB to the plane state, do this by copying the whole intel_fb_view struct. For this we make sure the FB view state is fully inited (that is also including the view type) already during FB creation, so this init is not required during atomic check time. This also means the we don't need to reset the unused color plane info during atomic check, as these are already reset during FB creation. I noticed that initial FBs will only work atm if they are page aligned (which BIOS most probably always ensures), but add a comment to sanitize this part once. Also we won't disable the plane if get_initial_plane_config() failed for some reason (for instance due to unsupported rotation), add a TODO: comment for this too. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Imre Deak authored
Instead of special casing getting the pitch for the normal view, store it during FB creation to the FB normal view struct and retrieve it from there during atomic check, as it's done for the rotated view. A follow-up patch does the same for a new FB remapped view. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Imre Deak authored
To allow the simplification of FB/plane view computation in the follow-up patches, unify the corresponding state in the intel_framebuffer and intel_plane_state structs into a new intel_fb_view struct. This adds some overhead to intel_framebuffer as the rotated view will have now space for 4 color planes instead of the required 2 and it'll also contain the unused offset for each color_plane info. Imo this is an acceptable trade-off to get a simplified way of the remap computation. Use the new intel_fb_view struct for the FB normal view as well, so (in the follow-up patches) we can remove the special casing for normal view calculation wrt. the calculation of remapped/rotated views. This also adds an overhead to the intel_framebuffer struct, as the gtt remap info and per-color plane offset/pitch is not required for the normal view, but imo this is an acceptable trade-off as above. The per-color plane pitch filed will be used by a follow-up patch, so we can retrieve the pitch for each view in the same way. No functional changes in this patch. v2: - Make the patch have _no functional change_. (fix skl_check_nv12_aux_surface() and skl_check_main_surface()). - s/i915_color_plane_view::pitch/stride/ (Ville) Suggested-by:
-
Imre Deak authored
Factor out to a new function the logic to calculate an FB plane's normal-view size. Instead of using intel_remapped_plane_info, which is related only to remapping, add a helper to get the tile pitch and rows for an FB plane, so these helpers can be used both by the normal size calculation and the remapping code. Also add a new fb_plane_view_dims struct in which we can pass around the view (either FB plane or plane source) and tile dimensions conveniently to functions calculating further view parameters. v2: - Add back the +1 tile adjustment for x!=0 in calc_plane_normal_size(). (Ville) - s/pages/tiles/ in calc_plane_normal_size(). (Ville) - Add a helper for the plane view width calculation. (Ville) - Return tiles as unsigned int from calc_plane_normal_size(). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Imre Deak authored
Factor out to a new function the logic to convert the FB plane x/y values to a tile size based offset and new x/y relative to this offset. This makes intel_fill_fb_info() and intel_plane_remap_gtt() somewhat more readable. Signed-off-by:
-
Imre Deak authored
Factor out to a new function the logic to convert the FB plane offset to x/y and check the validity of x/y, with the goal to make intel_fill_fb_info() more readable. v2: Use &fb->base instead of a drm_fb alias. (Ville) Signed-off-by:
-
Imre Deak authored
Rename dev_priv to i915 in the intel_fb.[ch] files. Signed-off-by:
-
Imre Deak authored
After the previous patch we can unexport intel_fb_check_stride(), which isn't needed by intel_display.c. Signed-off-by:
-
Imre Deak authored
Move the FB plane specific functions from intel_display.c to intel_fb.c. There's more functions like this, but I leave moving those as well for a follow up, and for now moving only the ones needed by the end of this patchset (adding support for padding tile-rows in an FB GGTT view). Signed-off-by:
-
Imre Deak authored
Move the FB plane specific function from intel_sprite.c to intel_fb.c Signed-off-by:
-
Imre Deak authored
Move is_surface_linear() to intel_fb.c and export it from here, also removing the duplicate definitions of it. Signed-off-by:
-
Imre Deak authored
Move the FB plane related functions from skl_universal_plane.c to intel_fb.c. Signed-off-by:
-
Imre Deak authored
Start collecting all the FB plane related functions into a new intel_fb.c file. v2: Drop display/ part of header includes. (Ville) Signed-off-by:
-
Imre Deak authored
This probably doesn't cause an issue, since the code checks the view type dependent size of the views before comparing them, but let's follow the practice to bzero the whole struct when initializing it. v2: Use {} instead of { } struct intializer. (Ville) Signed-off-by: -
Imre Deak authored
This probably doesn't cause an issue, since the code checks the view type dependent size of the views before comparing them, but let's follow the practice to bzero the whole struct when initializing it. Signed-off-by:
-
Imre Deak authored
The expected/found values were swapped in a debug message, fix this up. Signed-off-by:
-
Imre Deak authored
An inner scope version of err shadows the variable in the outer scope, and err doesn't get set after a failure, fix these. Signed-off-by:
-
Imre Deak authored
The HW plane state is cleared and inited after we store the rotation to it, so store it instead to the uapi state to match what we do with all other plane state until intel_plane_copy_uapi_to_hw_state() is called. Rotation for initial FBs is not supported atm, but let's still fix the plane state setup here. While at it remove the redundant intel_state->uapi.src/dst init, which will be done in intel_plane_copy_uapi_to_hw_state(). v2: Remove redundant intel_state->uapi.src/dst init. (Ville) Signed-off-by:
-
Wan Jiabing authored
struct drm_i915_private, struct intel_crtc_state and struct intel_crtc is declared twice. Remove the duplicate. Reviewed-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
-
Ville Syrjälä authored
The dbuf bandwidth calculations don't need the planes to be added to the state. Each plane's data rate has already been precalculated and stored in the crtc state, and that with the dbuf slice usage for each plane is all the dbuf bandwidth code needs to figure out what the minimum cdclk is. What we're trying to do here is make sure each plane recalculates its minimum cdclk (ie. plane->min_cdclk()) on those platforms where the number of active planes affects the result of said calculation. Nothing to do with any dbuf cdclk requirements. Not sure if we had stuff in slightly different order or what, but at least in the current scheme this is not necessary. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Jani Nikula authored
Matter of taste. Match the prefix for everything else related to steppings. No functional changes. Reviewed-by:
-
Jani Nikula authored
Matter of taste. Step matches the enums. Reviewed-by:
-
Jani Nikula authored
Matter of taste. STEP matches the enums. Reviewed-by:
-
Jani Nikula authored
This changes the way revids not present in the array are handled: - For gaps in the array, the next present revid is used. - For revids beyond the array, the new STEP_FUTURE is used instead of the last revid in the array. In both cases, we'll get debug logging of what's going on. v2: Rename stepping->step Reviewed-by:
-
Jani Nikula authored
Add new symbolic names for revision ids, and convert KBL revids to use them via the new stepping check macros. This also fixes theoretical out of bounds access to kbl_revids array. v3: upgrade dbg to warn on unknown revid (José) v2: Rename stepping->step Reviewed-by:
-
