Skip to content

L
linux
Switch branch/tag
  1. 22 Jun, 2004 2 commits
    • Len Brown's avatar
      [ACPI] ACPICA 20040527 from Bob Moore · 2d837fe9
      Len Brown authored 
      Completed a new design and implementation for EBDA
(Extended BIOS Data Area) support in the RSDP scan code.
The original code improperly scanned for the EBDA by simply
scanning from memory location 0 to 0x400.  The correct
method is to first obtain the EBDA pointer from within
the BIOS data area, then scan 1K of memory starting at the
EBDA pointer.  There appear to be few if any machines that
place the RSDP in the EBDA, however.
http://bugme.osdl.org/show_bug.cgi?id=2415

Integrated a fix for a possible fault during evaluation
of BufferField arguments.  Obsolete code that was causing
the problem was removed. (Asus laptop boot crash)
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121760

Found and fixed a problem in the Field Support Code
where data could be corrupted on a bit field read that
starts on an aligned boundary but does not end on an
aligned boundary.  Merged the read/write "datum length"
calculation code into a common procedure.
      2d837fe9
    • Len Brown's avatar
      [ACPI] ACPICA 20040514 from Bob Moore · f81d800e
      Len Brown authored 
      Fixed a problem where hardware GPE enable bits sometimes
not set properly during and after GPE method execution.
Result of ACPICA 20040427 changes.

Removed extra "clear all GPEs" when sleeping/waking.

Removed acpi_ht_enable_gpe and acpi_hw_disable_gpe, replaced
by the single acpi_hw_write_gpe_enable_reg. Changed a couple
of calls to the functions above to the new acpi_ev* calls
as appropriate.

ACPI_OS_NAME was removed from the OS-specific headers.
The default name is now "Microsoft Windows NT" for maximum
compatibility. However this can be changed by modifying
the acconfig.h file.  Fixes EHCI probe issue:
http://bugme.osdl.org/show_bug.cgi?id=1762

Allow a single invocation of acpi_install_notify_handler
for a handler that traps both types of notifies (System,
Device). Use ACPI_ALL_NOTIFY flag.

Run _INI methods on ThermalZone objects. This is against
the ACPI specification, but there is apparently ASL code
in the field that has these _INI methods, and apparently
"other" AML interpreters execute them.

Performed a full 16/32/64 bit lint that resulted in some
small changes.
      f81d800e
  3. 07 May, 2004 2 commits
    • Len Brown's avatar
      [ACPI] ACPICA 20040427 from Bob Moore · 5eb3a43d
      Len Brown authored 
      Completed a major overhaul of the GPE handling within ACPI CA.
There are now three types of GPEs:
wake-only; runtime-only; combination wake/run.

The only GPEs allowed to be combination wake/run are for
button-style devices such as a control-method power button,
control-method sleep button, or a notebook lid switch.
GPEs that have an _Lxx or _Exx method and are not referenced
by any _PRW methods are marked for "runtime" and hardware enabled.

Any GPE that is referenced by a _PRW method is marked for "wake"
(and disabled at runtime).  However, at sleep time, only those
GPEs that have been specifically enabled for wake via the
acpi_enable_gpe() interface will actually be hardware enabled.

A new external interface has been added, acpi_set_gpe_type()
that is meant to be used by device drivers to force a GPE
to a particular type.  It will be especially useful for the
drivers for the button devices mentioned above.

Completed restructuring of the ACPI CA initialization sequence
so that default operation region handlers are installed
before GPEs are initialized and the _PRW methods are executed.
This will prevent errors when the _PRW methods attempt to
access system memory or I/O space.

GPE enable/disable no longer reads the GPE enable register.
We now keep the enable info for runtime and wake separate
and in the GPE_EVENT_INFO.  We thus no longer depend on
the hardware to maintain these bits.

Always clear the wake status and fixed/GPE status bits
before sleep, even for state S5.

Improved the AML debugger output for displaying the
GPE blocks and their current status.

Added new strings for the _OSI method, of the form
"Windows 2001 SPx" where x = 0,1,2,3,4.

Fixed a problem where the physical address was incorrectly
calculated when the Load() operator was used to directly
load from an Operation Region (vs. loading from a Field object.)
Also added check for minimum table length for this case.

Fix for multiple mutex acquisition.  Restore original thread
SyncLevel on mutex release.

Added ACPI_VALID_SXDS flag to the acpi_get_object_info interface
for consistency with the other fields returned.

Shrunk the ACPI_GPE_EVENT_INFO structure by 40%.
There is one such structure for each GPE in the system,
so the size of this structure is important.

CPU stack requirement reduction:
Cleaned up the method execution and object evaluation paths
so that now a parameter structure is passed, instead of copying
the various method parameters over and over again.

In evregion.c:
Correctly exit and reenter the interpreter region if and only
if dispatching an operation region request to a user-installed
handler. Do not exit/reenter when dispatching to a default
handler (e.g., default system memory or I/O handlers)
      5eb3a43d
    • Len Brown's avatar
      [ACPI] ACPICA 20040402 from Bob Moore · a308df02
      Len Brown authored 
      Fixed an interpreter problem where an indirect store through an
ArgX parameter was incorrectly applying the "implicit conversion
rules" during the store.  From the ACPI specification: "If the
target is a method local or argument (LocalX or ArgX), no
conversion is performed and the result is stored directly to the
target".  The new behavior is to disable implicit conversion
during ALL stores to an ArgX.

Changed the behavior of the _PRW method scan to ignore any and
all errors returned by a given _PRW.  This prevents the scan from
aborting from the failure of any single _PRW.

Moved the runtime configuration parameters from the global init
procedure to static variables in acglobal.h.  This will allow the
host to override the default values easily.
      a308df02
  5. 03 May, 2004 1 commit
  7. 02 May, 2004 1 commit
  9. 30 Apr, 2004 1 commit
  11. 28 Apr, 2004 1 commit
  13. 27 Apr, 2004 8 commits
  15. 23 Apr, 2004 3 commits
  17. 22 Apr, 2004 2 commits
  19. 20 Apr, 2004 2 commits
  21. 16 Apr, 2004 1 commit
  23. 14 Apr, 2004 1 commit
  25. 03 Apr, 2004 9 commits
  27. 02 Apr, 2004 6 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7