- 03 Feb, 2023 2 commits
-
-
Shang XiaoJing authored
There is a kmemleak when testing the media/i2c/ov2740.c with bpf mock device: unreferenced object 0xffff8881090e19e0 (size 16): comm "51-i2c-ov2740", pid 278, jiffies 4294781584 (age 23.613s) hex dump (first 16 bytes): 00 f3 7c 0b 81 88 ff ff 80 75 6a 09 81 88 ff ff ..|......uj..... backtrace: [<000000004e9fad8f>] __kmalloc_node+0x44/0x1b0 [<0000000039c802f4>] kvmalloc_node+0x34/0x180 [<000000009b8b5c63>] v4l2_ctrl_handler_init_class+0x11d/0x180 [videodev] [<0000000038644056>] ov2740_probe+0x37d/0x84f [ov2740] [<0000000092489f59>] i2c_device_probe+0x28d/0x680 [<000000001038babe>] really_probe+0x17c/0x3f0 [<0000000098c7af1c>] __driver_probe_device+0xe3/0x170 [<00000000e1b3dc24>] device_driver_attach+0x34/0x80 [<000000005a04a34d>] bind_store+0x10b/0x1a0 [<00000000ce25d4f2>] drv_attr_store+0x49/0x70 [<000000007d9f4e9a>] sysfs_kf_write+0x8c/0xb0 [<00000000be6cff0f>] kernfs_fop_write_iter+0x216/0x2e0 [<0000000031ddb40a>] vfs_write+0x658/0x810 [<0000000041beecdd>] ksys_write+0xd6/0x1b0 [<0000000023755840>] do_syscall_64+0x38/0x90 [<00000000b2cc2da2>] entry_SYSCALL_64_after_hwframe+0x63/0xcd ov2740_init_controls() won't clean all the allocated resources in fail path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to prevent memleak. Fixes: 866edc89 ("media: i2c: Add ov2740 image sensor driver") Signed-off-by:Shang XiaoJing <shangxiaojing@huawei.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Shang XiaoJing authored
There is a kmemleak when testing the media/i2c/max9286.c with bpf mock device: kmemleak: 5 new suspected memory leaks (see /sys/kernel/debug/kmemleak) unreferenced object 0xffff88810defc400 (size 256): comm "python3", pid 278, jiffies 4294737563 (age 31.978s) hex dump (first 32 bytes): 28 06 a7 0a 81 88 ff ff 00 fe 22 12 81 88 ff ff (........."..... 10 c4 ef 0d 81 88 ff ff 10 c4 ef 0d 81 88 ff ff ................ backtrace: [<00000000191de6a7>] __kmalloc_node+0x44/0x1b0 [<000000002f4912b7>] kvmalloc_node+0x34/0x180 [<0000000057dc4cae>] v4l2_ctrl_new+0x325/0x10f0 [videodev] [<0000000026030272>] v4l2_ctrl_new_std+0x16f/0x210 [videodev] [<00000000f0d9ea2f>] max9286_probe+0x76e/0xbff [max9286] [<00000000ea8f6455>] i2c_device_probe+0x28d/0x680 [<0000000087529af3>] really_probe+0x17c/0x3f0 [<00000000b08be526>] __driver_probe_device+0xe3/0x170 [<000000004382edea>] driver_probe_device+0x49/0x120 [<000000007bde528a>] __device_attach_driver+0xf7/0x150 [<000000009f9c6ab4>] bus_for_each_drv+0x114/0x180 [<00000000c8aaf588>] __device_attach+0x1e5/0x2d0 [<0000000041cc06b9>] bus_probe_device+0x126/0x140 [<000000002309860d>] device_add+0x810/0x1130 [<000000002827bf98>] i2c_new_client_device+0x359/0x4f0 [<00000000593bdc85>] of_i2c_register_device+0xf1/0x110 max9286_v4l2_register() calls v4l2_ctrl_new_std(), but won't free the created v412_ctrl when fwnode_graph_get_endpoint_by_id() failed, which causes the memleak. Call v4l2_ctrl_handler_free() to free the v412_ctrl. Fixes: 66d8c9d2 ("media: i2c: Add MAX9286 driver") Signed-off-by:Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
- 22 Jan, 2023 38 commits
-
-
Hans Verkuil authored
The tm6000 driver does not use the vb2 framework for streaming video, instead it uses the old vb1 framework and nobody stepped in to convert this driver to vb2. The hardware is very old, so the decision was made to remove it altogether since we want to get rid of the old vb1 framework. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
The vpfe_capture drivers do not use the vb2 framework for streaming video, instead they use the old vb1 framework and nobody stepped in to convert these drivers to vb2. The hardware is very old, so the decision was made to remove them altogether since we want to get rid of the old vb1 framework. Signed-off-by:
Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Hans Verkuil authored
The zr364xx driver does not use the vb2 framework for streaming video, instead it uses the old vb1 framework and nobody stepped in to convert this driver to vb2. The hardware is very old, so the decision was made to remove it altogether since we want to get rid of the old vb1 framework. Signed-off-by:
-
Hans Verkuil authored
The stkwebcam driver does not use the vb2 framework for streaming video, instead it implements this in the driver. This is error prone, and nobody stepped in to convert this driver to that framework. The hardware is very old, so the decision was made to remove it altogether. Signed-off-by:
-
Hans Verkuil authored
The fsl-viu driver does not use the vb2 framework for streaming video, instead it uses the old vb1 framework and nobody stepped in to convert this driver to vb2. The hardware is very old, so the decision was made to remove it altogether since we want to get rid of the old vb1 framework. Signed-off-by:
-
Hans Verkuil authored
The cpia2 driver does not use the vb2 framework for streaming video, instead it implements this in the driver. This is error prone, and nobody stepped in to convert this driver to that framework. The hardware is very old, so the decision was made to remove it altogether. Signed-off-by:
-
Hans Verkuil authored
The meye driver does not use the vb2 framework for streaming video, instead it implements this in the driver. This is error prone, and nobody stepped in to convert this driver to that framework. The hardware is very old, so the decision was made to remove it altogether. Signed-off-by:
-
Sakari Ailus authored
Document how streams interacts with formats and selections. Update documentation in respect to what is allowed, in particular streams are only supported via full routes, source-only routes are not supported right now. The centerpiece of the API additions are streams. Albeit routes are configured via S_ROUTING IOCTL that also declares streams, it is streams that are accessed through other APIs. Thus refer to streams instead of routes in documentation. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by:
-
Sakari Ailus authored
The stream field identifies the stream this frame descriptor applies to in routing configuration across a multiplexed link. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Laurent Pinchart authored
The v4l2_subdev_s_stream_helper() helper can be used by subdevs that implement the stream-aware .enable_streams() and .disable_streams() operations to implement .s_stream(). This is limited to subdevs that have a single source pad. Signed-off-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
-
Laurent Pinchart authored
Add two new subdev pad operations, .enable_streams() and .disable_streams(), to allow control of individual streams per pad. This is a superset of what the video .s_stream() operation implements. To help with handling of backward compatibility, add two wrapper functions around those operations, and require their usage in drivers. Signed-off-by:
-
Laurent Pinchart authored
Add a helper function to translate streams between two pads of a subdev, using the subdev's internal routing table. Signed-off-by:
-
Laurent Pinchart authored
Add a v4l2_subdev_routing_validate() helper for verifying routing for common cases like only allowing non-overlapping 1-to-1 streams. Signed-off-by:
-
Tomi Valkeinen authored
v4l2_subdev_set_routing_with_fmt() is the same as v4l2_subdev_set_routing(), but additionally initializes all the streams with the given format. Signed-off-by:
-
Tomi Valkeinen authored
Add streams support to v4l2_subdev_get_fmt() helper function. Subdev drivers that do not need to do anything special in their get_fmt op can use this helper directly for v4l2_subdev_pad_ops.get_fmt. Signed-off-by:
-
Tomi Valkeinen authored
Add two helper functions to make dealing with streams easier: v4l2_subdev_routing_find_opposite_end - given a routing table and a pad + stream, return the pad + stream on the opposite side of the subdev. v4l2_subdev_state_get_opposite_stream_format - return a pointer to the format on the pad + stream on the opposite side from the given pad + stream. Signed-off-by:
-
Tomi Valkeinen authored
Update v4l2_subdev_link_validate() to use routing and streams for validation. Instead of just looking at the format on the pad on both ends of the link, the routing tables are used to collect all the streams going from the source to the sink over the link, and the streams' formats on both ends of the link are verified. Signed-off-by:
-
Tomi Valkeinen authored
Add support to manage configurations (format, crop, compose) per stream, instead of per pad. This is accomplished with data structures that hold an array of all subdev's stream configurations. The number of streams can vary at runtime based on routing. Every time the routing is changed, the stream configurations need to be re-initialized. Signed-off-by:
-
Tomi Valkeinen authored
Add documentation related to multiplexed streams. Signed-off-by:
-
Jacopo Mondi authored
Add a for_each_active_route() macro to replace the repeated pattern of iterating on the active routes of a routing table. Signed-off-by:
-
Tomi Valkeinen authored
Add a helper function to set the subdev routing. The helper can be used from subdev driver's set_routing op to store the routing table. Signed-off-by:
-
Tomi Valkeinen authored
Add a v4l2_subdev_has_pad_interdep() helper function which can be used for media_entity_operations.has_pad_interdep op. It considers two pads interdependent if there is an active route between pad0 and pad1. Signed-off-by:
-
Tomi Valkeinen authored
The Streams API is an experimental feature. To use the Streams API, the user needs to change a variable in v4l2-subdev.c and recompile the kernel. This commit should be reverted when the Streams API is deemed ready for production use. Signed-off-by:
-
Laurent Pinchart authored
Add support for subdev internal routing. A route is defined as a single stream from a sink pad to a source pad. The userspace can configure the routing via two new ioctls, VIDIOC_SUBDEV_G_ROUTING and VIDIOC_SUBDEV_S_ROUTING, and subdevs can implement the functionality with v4l2_subdev_pad_ops.set_routing(). - Add sink and source streams for multiplexed links - Copy the argument back in case of an error. This is needed to let the caller know the number of routes. - Expand and refine documentation. - Make the 'routes' pointer a __u64 __user pointer so that a compat32 version of the ioctl is not required. - Add struct v4l2_subdev_krouting to be used for subdevice operations. - Fix typecasing warnings - Check sink & source pad types - Add 'which' field - Routing to subdev state - Dropped get_routing subdev op Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Jacopo Mondi authored
Add documentation for VIDIOC_SUBDEV_G/S_ROUTING ioctl and add description of multiplexed media pads and internal routing to the V4L2-subdev documentation section. Signed-off-by:
-
Tomi Valkeinen authored
Add a subdev capability flag to expose to userspace if a subdev supports multiplexed streams. Signed-off-by:
-
Tomi Valkeinen authored
Add subdev flag V4L2_SUBDEV_FL_STREAMS. It is used to indicate that the subdev supports the new API with multiplexed streams (routing, stream configs). Signed-off-by:
-
Tomi Valkeinen authored
Sort the includes alphabetically. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Yang Yingliang authored
Add missing clk_disable_unprepare(), if imx7_csi_dma_setup() fails in imx7_csi_init(). Fixes: ff43ca91 ("media: imx: imx7-media-csi: Move CSI configuration before source start") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Jiasheng Jiang authored
Add check for the return value of devm_regulator_get since it may return error pointer. Fixes: 448de7e7 ("[media] omap3isp: OMAP3 ISP core") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by:
-
Xavier Roumegue authored
In case the IRQ allocation returns an error in dw100_probe(), the pm runtime is not disabled before to return. Add the missing unwind goto on the error handling path of the IRQ allocation request. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Xavier Roumegue <xavier.roumegue@oss.nxp.com> Signed-off-by:
-
Marek Vasut authored
The power-domains property is mandatory on i.MX8M Quad and Mini. Document the property and mark it as required on the aforementioned variants of the IP, present in those SoCs. Signed-off-by:
Marek Vasut <marex@denx.de> Acked-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Miaoqian Lin authored
There is no media_graph_walk_free(). media_graph_walk_cleanup() is used to release the resources. Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
Document the function parameters, the requirements on the pad0 and pad1 arguments, the locking requirements and the return value. Also improve the documentation of the corresponding .has_pad_interdep() operation, stating clearly that the operation must be called through the media_entity_has_pad_interdep() function only. Signed-off-by:
-
Gaosheng Cui authored
The memory of ctx is allocated in cal_ctx_create(), but it will not be freed when cal_ctx_v4l2_init() fails, so add kfree() when cal_ctx_v4l2_init() fails to fix it. Fixes: d68a94e9 ("media: ti-vpe: cal: Split video device initialization and registration") Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by:
-
Laurent Pinchart authored
The power-up GMSL link configuration is controlled by the HIM and BWS pins, whose state is reflected in register 0x1c. Print the detected power-up config in a debug message to help debugging. Signed-off-by:
-
Laurent Pinchart authored
GMSL can transport three synchronization signals: VSync, HSync and Data Enable. The MAX9286 can select either HS or DE as a line valid signal. Not all serializers (and transmission formats) support the DE signal. The MAX9271, used by the RDACM20 and RDACM21 cameras, doesn't document DE support. Nonetheless, the max9286 driver selects the DE signal as line valid in register 0x0c (by not setting the DESEL bit). It's not clear why this works. As HS is a more common line valid qualifier, set the DESEL bit by default. This is needed to support the onsemi MARS cameras. If a camera requires usage of the DE signal in the future, this will need to be made configurable. Signed-off-by:
-
Laurent Pinchart authored
The GMSL serial data bus width is normally selected through the BWS pin. On some systems, the pin may not be wired to the correct value. Support overriding the bus width by software, using the value specified in the device tree. Signed-off-by:
-
