This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This can (should) be done from a common place as its required for most
of the protocols. Do it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Save major/minor number supported by the module inside connection
structure, as this can be used later.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Some request numbers (like invalid and get_version) are same across all
protocols. Create common macros for them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Its possible for connection_init() to fail, in such cases the
disconnected event must be sent to the module.

It is missing currently, fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

!= was used in place of <, while comparing expected and actual payload
size. The module may be running a higher version of the protocol and
might have some extra fields (towards the end) in the structure, and the
AP needs to ignore them.

This also updates the print (expected-payload-size <
actual-payload-size), when the size doesn't match for requests received
by the module. This gives more details required for debugging.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This increases readability a bit more, as it tells which value is actual
size and which one is expected size.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Its handled by the firmware driver now, drop the FIXME comment from svc
code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Minor spell fix.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

!= was used in place of <, while comparing expected and actual payload
size. The module may be running a higher version of the protocol and
might have some extra fields (towards the end) in the structure, and the
AP needs to ignore them.

This also updates the print (expected-payload-size <
actual-payload-size), when the size doesn't match for requests received
by the module. This gives more details required for debugging.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Print (expected-payload-size actual-payload-size), when the size doesn't
match for requests received by the module. This gives more details
required for debugging the issue.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Print (expected-payload-size actual-payload-size), when the size doesn't
match for requests received by the module. This gives more details
required for debugging the issue.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

These were not defined, and I just posted patches that use them.
Signed-off-by: Alex Elder <elder@linaro.org>
Tested-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The error paths in gb_loopback_connection_init() are kind of screwed
up--not in proper order, and the label naming convention seems a
little inconsistent.

Fix this, ensuring each error cleans up the setup that's been done
up to that point.  Use the convention that the label indicates the
first thing that needs to be cleaned up.

Reorder the statements in gb_loopback_connection_exit() to match
the order of cleanup in gb_loopback_connection_init().
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Stop recording and updating the average every time a sample
is recorded.  Instead, compute it from the sum and count only
when it's required.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Define a separate macro for displaying the average of the samples
collected.  This will be used so we can calculate the average only
when requested, rather than every time a new value gets recorded.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The only values passed to the gb_loopback_ro_attr() macro are
unsigned 32-bit values.  So there's no need to pass a "type"
format specifier.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The error count is unsigned, so fix the format specifier used in its
attribute definition.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The count of statistical samples recorded is currently a 64-bit
value.  32 bits is sufficient, and in fact anything more than
that won't work for the do_div() call it's pass to anyway.  So make
the count field be 32 bits.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The minimum and maximum values for stats values are always 32 bits.
Change the type for these fields to reflect this.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The only values supplied to gb_loopback_update_stats() are 32-bits,
so change the type of the second argument to reflect that.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Use the largest representable value when initializing the "min"
field when resetting loopback statistics.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

There is no need to cast a void pointer to a particular type.
Drop the casts used in this way, mainly in the attribute definition
macros.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Fix two misspellings.  And add spaces around a '%' operator.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add a public declaration for gb_interface_destroy(), matching
gb_interface_create().

It's not yet used outside "interface.c" but I suppose it
could be, and its scope is currently public.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

For consistency reasons, use only type attributes for message packing.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add missing packed attributes to prevent implicit structure padding.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>