- 14 May, 2024 40 commits
-
-
Luiz Augusto von Dentz authored
This makes sure that discovery state is properly synchronized otherwise reports may not generate MGMT DeviceFound events as it would be assumed that it was not initiated by a discovery session. Signed-off-by:Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
This adds proper definitions for scan interval and window and then make use of them instead their values. Signed-off-by: -
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Ian W MORRISON authored
This patch adds support for the MediaTek MT7922 Bluetooth device. The information in /sys/kernel/debug/usb/devices about the MT7922 is as follows: T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3585 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by:
Ian W MORRISON <ianwmorrison@live.com> Signed-off-by:
-
Kiran K authored
Some variants of Intel controllers like BlazarI supports downloading of Intermediate bootloader (IML) image. IML gives flexibility to fix issues as its not possible to fix issue in Primary bootloader once flashed to ROM. This patch adds the support to download IML before downloading operational firmware image. dmesg logs: [13.399003] Bluetooth: Core ver 2.22 [13.399006] Bluetooth: Starting self testing [13.401194] Bluetooth: ECDH test passed in 2135 usecs [13.421175] Bluetooth: SMP test passed in 597 usecs [13.421184] Bluetooth: Finished self testing [13.422919] Bluetooth: HCI device and connection manager initialized [13.422923] Bluetooth: HCI socket layer initialized [13.422925] Bluetooth: L2CAP socket layer initialized [13.422930] Bluetooth: SCO socket layer initialized [13.458065] Bluetooth: hci0: Device revision is 0 [13.458071] Bluetooth: hci0: Secure boot is disabled [13.458072] Bluetooth: hci0: OTP lock is disabled [13.458072] Bluetooth: hci0: API lock is enabled [13.458073] Bluetooth: hci0: Debug lock is disabled [13.458073] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [13.458075] Bluetooth: hci0: Bootloader timestamp 2022.46 buildtype 1 build 26590 [13.458324] Bluetooth: hci0: DSM reset method type: 0x00 [13.460678] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291-iml.sfi [13.460684] Bluetooth: hci0: Boot Address: 0x30099000 [13.460685] Bluetooth: hci0: Firmware Version: 227-11.24 [13.562554] Bluetooth: hci0: Waiting for firmware download to complete [13.563023] Bluetooth: hci0: Firmware loaded in 99941 usecs [13.563057] Bluetooth: hci0: Waiting for device to boot [13.565029] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [13.565148] Bluetooth: hci0: Device booted in 2064 usecs [13.567065] Bluetooth: hci0: No device address configured [13.569010] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291.sfi [13.569061] Bluetooth: hci0: Boot Address: 0x10000800 [13.569062] Bluetooth: hci0: Firmware Version: 227-11.24 [13.788891] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [13.788897] Bluetooth: BNEP filters: protocol multicast [13.788902] Bluetooth: BNEP socket layer initialized [15.435905] Bluetooth: hci0: Waiting for firmware download to complete [15.436016] Bluetooth: hci0: Firmware loaded in 1823233 usecs [15.436258] Bluetooth: hci0: Waiting for device to boot [15.471140] Bluetooth: hci0: Device booted in 34277 usecs [15.471201] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [15.471487] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0090-0291.ddc [15.474353] Bluetooth: hci0: Applying Intel DDC parameters completed [15.474486] Bluetooth: hci0: Found Intel DDC parameters: intel/bdaddress.cfg [15.475299] Bluetooth: hci0: Applying Intel DDC parameters completed [15.479381] Bluetooth: hci0: Firmware timestamp 2024.10 buildtype 3 build 58595 [15.479385] Bluetooth: hci0: Firmware SHA1: 0xb4f3cc46 [15.483243] Bluetooth: hci0: Fseq status: Success (0x00) [15.483246] Bluetooth: hci0: Fseq executed: 00.00.00.00 [15.483247] Bluetooth: hci0: Fseq BT Top: 00.00.00.00 [15.578712] Bluetooth: MGMT ver 1.22 [15.822682] Bluetooth: RFCOMM TTY layer initialized [15.822690] Bluetooth: RFCOMM socket layer initialized [15.822695] Bluetooth: RFCOMM ver 1.11 Signed-off-by:
Kiran K <kiran.k@intel.com> Signed-off-by:
-
Kiran K authored
Use macro for image type instead of using hard code number. Signed-off-by:
-
Jakub Kicinski authored
The series is causing issues with PHY drivers built as modules. Since it was only partially applied and the merge window has opened let's revert and try again for v6.11. Revert 6916e461 ("net: phy: Introduce ethernet link topology representation") Revert 0ec5ed6c ("net: sfp: pass the phy_device when disconnecting an sfp module's PHY") Revert e75e4e07 ("net: phy: add helpers to handle sfp phy connect/disconnect") Revert fdd35396 ("net: sfp: Add helper to return the SFP bus name") Revert 841942bc ("net: ethtool: Allow passing a phy index for some commands") Link: https://lore.kernel.org/all/171242462917.4000.9759453824684907063.git-patchwork-notify@kernel.org/ Link: https://lore.kernel.org/all/20240507102822.2023826-1-maxime.chevallier@bootlin.com/ Link: https://lore.kernel.org/r/20240513154156.104281-1-kuba@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Xiaolei Wang says: ==================== Move EST lock and EST structure to struct stmmac_priv 1. Pulling the mutex protecting the EST structure out to avoid clearing it during reinit/memset of the EST structure,and reacquire the mutex lock when doing this initialization. 2. Moving the EST structure to a more logical location ==================== Link: https://lore.kernel.org/r/20240513014346.1718740-1-xiaolei.wang@windriver.comSigned-off-by: -
Xiaolei Wang authored
Move the EST structure to struct stmmac_priv, because the EST configs don't look like platform config, but EST is enabled in runtime with the settings retrieved for the TC TAPRIO feature also in runtime. So it's better to have the EST-data preserved in the driver private data instead of the platform data storage. Signed-off-by:
Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by:
Simon Horman <horms@kernel.org> Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Reviewed-by:
Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240513014346.1718740-3-xiaolei.wang@windriver.comSigned-off-by:
-
Xiaolei Wang authored
Reinitialize the whole EST structure would also reset the mutex lock which is embedded in the EST structure, and then trigger the following warning. To address this, move the lock to struct stmmac_priv. We also need to reacquire the mutex lock when doing this initialization. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 505 at kernel/locking/mutex.c:587 __mutex_lock+0xd84/0x1068 Modules linked in: CPU: 3 PID: 505 Comm: tc Not tainted 6.9.0-rc6-00053-g01066798-dirty #29 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mutex_lock+0xd84/0x1068 lr : __mutex_lock+0xd84/0x1068 sp : ffffffc0864e3570 x29: ffffffc0864e3570 x28: ffffffc0817bdc78 x27: 0000000000000003 x26: ffffff80c54f1808 x25: ffffff80c9164080 x24: ffffffc080d723ac x23: 0000000000000000 x22: 0000000000000002 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffc083bc3000 x18: ffffffffffffffff x17: ffffffc08117b080 x16: 0000000000000002 x15: ffffff80d2d40000 x14: 00000000000002da x13: ffffff80d2d404b8 x12: ffffffc082b5a5c8 x11: ffffffc082bca680 x10: ffffffc082bb2640 x9 : ffffffc082bb2698 x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001 x5 : ffffff8178fe0d48 x4 : 0000000000000000 x3 : 0000000000000027 x2 : ffffff8178fe0d50 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: __mutex_lock+0xd84/0x1068 mutex_lock_nested+0x28/0x34 tc_setup_taprio+0x118/0x68c stmmac_setup_tc+0x50/0xf0 taprio_change+0x868/0xc9c Fixes: b2aae654 ("net: stmmac: add mutex lock to protect est parameters") Signed-off-by:
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: small improvements, fix and clean-ups This series contain mostly unrelated patches: - The two first patches can be seen as "fixes". They are part of this series for -next because it looks like the last batch of fixes for v6.9 has already been sent. These fixes are not urgent, so they can wait if an unlikely v6.9-rc8 is published. About the two patches: - Patch 1 fixes getsockopt(SO_KEEPALIVE) support on MPTCP sockets - Patch 2 makes sure the full TCP keep-alive feature is supported, not just SO_KEEPALIVE. - Patch 3 is a small optimisation when getsockopt(MPTCP_INFO) is used without buffer, just to check if MPTCP is still being used: no fallback to TCP. - Patch 4 adds net.mptcp.available_schedulers sysctl knob to list packet schedulers, similar to net.ipv4.tcp_available_congestion_control. - Patch 5 and 6 fix CheckPatch warnings: "prefer strscpy over strcpy" and "else is not generally useful after a break or return". - Patch 7 and 8 remove and add header includes to avoid unused ones, and add missing ones to be self-contained. ==================== Link: https://lore.kernel.org/r/20240514011335.176158-1-martineau@kernel.orgSigned-off-by: -
Matthieu Baerts (NGI0) authored
So this file is now self-contained: it can be compiled alone with analytic tools. Reviewed-by:
Geliang Tang <geliang@kernel.org> Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by:
Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20240514011335.176158-9-martineau@kernel.orgSigned-off-by:
-
Matthieu Baerts (NGI0) authored
Nothing from protocol.h depends on mptcp_pm_gen.h, only code from pm_netlink.c and pm_userspace.c depends on it. So this include can be moved where it is needed to avoid a "unused includes" warning. Reviewed-by:
-
Matthieu Baerts (NGI0) authored
The 'else' statements are not needed here, because their previous 'if' block ends with a 'return'. This fixes CheckPatch warnings: WARNING: else is not generally useful after a break or return Reviewed-by:
-
Matthieu Baerts (NGI0) authored
strcpy() performs no bounds checking on the destination buffer. This could result in linear overflows beyond the end of the buffer, leading to all kinds of misbehaviors. The safe replacement is strscpy() [1]. This is in preparation of a possible future step where all strcpy() uses will be removed in favour of strscpy() [2]. This fixes CheckPatch warnings: WARNING: Prefer strscpy over strcpy Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1] Link: https://github.com/KSPP/linux/issues/88 [2] Reviewed-by:
-
Gregory Detal authored
The sysctl lists the available schedulers that can be set using net.mptcp.scheduler similarly to net.ipv4.tcp_available_congestion_control. Signed-off-by:
Gregory Detal <gregory.detal@gmail.com> Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Up to recently, it has been recommended to use getsockopt(MPTCP_INFO) to check if a fallback to TCP happened, or if the client requested to use MPTCP. In this case, the userspace app is only interested by the returned value of the getsocktop() call, and can then give 0 for the option length, and NULL for the buffer address. An easy optimisation is then to stop early, and avoid filling a local buffer -- which now requires two different locks -- if it is not needed. Reviewed-by:
-
Matthieu Baerts (NGI0) authored
SO_KEEPALIVE support has been added a while ago, as part of a series "adding SOL_SOCKET" support. To have a full control of this keep-alive feature, it is important to also support TCP_KEEP* socket options at the SOL_TCP level. Supporting them on the setsockopt() part is easy, it is just a matter of remembering each value in the MPTCP sock structure, and calling tcp_sock_set_keep*() helpers on each subflow. If the value is not modified (0), calling these helpers will not do anything. For the getsockopt() part, the corresponding value from the MPTCP sock structure or the default one is simply returned. All of this is very similar to other TCP_* socket options supported by MPTCP. It looks important for kernels supporting SO_KEEPALIVE, to also support TCP_KEEP* options as well: some apps seem to (wrongly) consider that if the former is supported, the latter ones will be supported as well. But also, not having this simple and isolated change is preventing MPTCP support in some apps, and libraries like GoLang [1]. This is why this patch is seen as a fix. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/383 Fixes: 1b3e7ede ("mptcp: setsockopt: handle SO_KEEPALIVE and SO_PRIORITY") Link: https://github.com/golang/go/issues/56539 [1] Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Matthieu Baerts (NGI0) authored
SO_KEEPALIVE support has to be set on each subflow: on each TCP socket, where sk_prot->keepalive is defined. Technically, nothing has to be done on the MPTCP socket. That's why mptcp_sol_socket_sync_intval() was called instead of mptcp_sol_socket_intval(). Except that when nothing is done on the MPTCP socket, the getsockopt(SO_KEEPALIVE), handled in net/core/sock.c:sk_getsockopt(), will not know if SO_KEEPALIVE has been set on the different subflows or not. The fix is simple: simply call mptcp_sol_socket_intval() which will end up calling net/core/sock.c:sk_setsockopt() where the SOCK_KEEPOPEN flag will be set, the one used in sk_getsockopt(). So now, getsockopt(SO_KEEPALIVE) on an MPTCP socket will return the same value as the one previously set with setsockopt(SO_KEEPALIVE). Fixes: 1b3e7ede ("mptcp: setsockopt: handle SO_KEEPALIVE and SO_PRIORITY") Acked-by:
-
Haiyang Zhang authored
Change the Kconfig dependency, so this driver can be built and run on ARM64 with 4K page size. 16/64K page sizes are not supported yet. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Link: https://lore.kernel.org/r/1715632141-8089-1-git-send-email-haiyangz@microsoft.comSigned-off-by:
-
Erick Archer authored
The "struct prestera_msg_vtcam_rule_add_req" uses a dynamically sized set of trailing elements. Specifically, it uses an array of structures of type "prestera_msg_acl_action actions_msg". The "struct prestera_msg_flood_domain_ports_set_req" also uses a dynamically sized set of trailing elements. Specifically, it uses an array of structures of type "prestera_msg_acl_action actions_msg". So, use the preferred way in the kernel declaring flexible arrays [1]. At the same time, prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). In this case, it is important to note that the attribute used is specifically __counted_by_le since the counters are of type __le32. The logic does not need to change since the counters for the flexible arrays are asigned before any access to the arrays. The order in which the structure prestera_msg_vtcam_rule_add_req and the structure prestera_msg_flood_domain_ports_set_req are defined must be changed to avoid incomplete type errors. Also, avoid the open-coded arithmetic in memory allocator functions [2] using the "struct_size" macro. Moreover, the new structure members also allow us to avoid the open- coded arithmetic on pointers. So, take advantage of this refactoring accordingly. This code was detected with the help of Coccinelle, and audited and modified manually. Link: https://www.kernel.org/doc/html/next/process/deprecated.html#zero-length-and-one-element-arrays [1] Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [2] Signed-off-by:
Erick Archer <erick.archer@outlook.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/AS8PR02MB7237E8469568A59795F1F0408BE12@AS8PR02MB7237.eurprd02.prod.outlook.comSigned-off-by:
-
Jakub Kicinski authored
Jason Xing says: ==================== tcp: support rstreasons in the passive logic In this series, I split all kinds of reasons into five part which, I think, can be easily reviewed. I respectively implement corresponding rstreasons in those functions. After this, we can trace the whole tcp passive reset with clear reasons. ==================== Link: https://lore.kernel.org/r/20240510122502.27850-1-kerneljasonxing@gmail.comSigned-off-by:
-
Jason Xing authored
We're going to send an RST due to invalid syn packet which is already checked whether 1) it is in sequence, 2) it is a retransmitted skb. As RFC 793 says, if the state of socket is not CLOSED/LISTEN/SYN-SENT, then we should send an RST when receiving bad syn packet: "fourth, check the SYN bit,...If the SYN is in the window it is an error, send a reset" Signed-off-by:
Jason Xing <kernelxing@tencent.com> Link: https://lore.kernel.org/r/20240510122502.27850-6-kerneljasonxing@gmail.comSigned-off-by:
-
Jason Xing authored
There are two possible cases where TCP layer can send an RST. Since they happen in the same place, I think using one independent reason is enough to identify this special situation. Signed-off-by:
-
Jason Xing authored
Like the previous patch does in this series, finish the conversion map is enough to let rstreason mechanism work in this function. Signed-off-by:
-
Jason Xing authored
Based on the existing skb drop reason, updating the rstreason map can help us finish the rstreason job in this function. Signed-off-by:
-
Jason Xing authored
In this function, only updating the map can finish the job for socket reset reason because the corresponding drop reasons are ready. Signed-off-by:
-
Jakub Kicinski authored
Romain Gantois says: ==================== net: stmmac: Add support for RZN1 GMAC devices This is version seven of my series that adds support for a Gigabit Ethernet controller featured in the Renesas r9a06g032 SoC, of the RZ/N1 family. This GMAC device is based on a Synopsys IP and is compatible with the stmmac driver. My former colleague Clément Léger originally sent a series for this driver, but an issue in bringing up the PCS clock had blocked the upstreaming process. This issue has since been resolved by the following series: https://lore.kernel.org/all/20240326-rxc_bugfix-v6-0-24a74e5c761f@bootlin.com/ This series consists of a devicetree binding describing the RZN1 GMAC controller IP, a node for the GMAC1 device in the r9a06g032 SoC device tree, and the GMAC driver itself which is a glue layer in stmmac. There are also two patches by Russell that improve pcs initialization handling in stmmac. ==================== Link: https://lore.kernel.org/r/20240513-rzn1-gmac1-v7-0-6acf58b5440d@bootlin.comSigned-off-by:
-
Clément Léger authored
Add support for the Renesas RZ/N1 GMAC. This support can make use of a custom RZ/N1 PCS which is fetched by parsing the pcs-handle device tree property. Signed-off-by:
Clément Léger <clement.leger@bootlin.com> Co-developed-by:
Romain Gantois <romain.gantois@bootlin.com> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Hariprasad Kelam <hkelam@marvell.com> Link: https://lore.kernel.org/r/20240513-rzn1-gmac1-v7-6-6acf58b5440d@bootlin.comSigned-off-by:
-
Russell King (Oracle) authored
Use the newly introduced pcs_init() and pcs_exit() operations to create and destroy the PCS instance at a more appropriate moment during the driver lifecycle, thereby avoiding publishing a network device to userspace that has not yet finished its PCS initialisation. There are other similar issues with this driver which remain unaddressed, but these are out of scope for this patch. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> [rgantois: removed second parameters of new callbacks] Signed-off-by:
-
Russell King (Oracle) authored
Introduce a mechanism whereby platforms can create their PCS instances prior to the network device being published to userspace, but after some of the core stmmac initialisation has been completed. This means that the data structures that platforms need will be available. Signed-off-by:
-
Serge Semin authored
A pcs_init() callback will be introduced to stmmac in a future patch. This new function will be called during the hardware initialization phase. Instead of separately initializing XPCS and PCS components, let's group all PCS-related hardware initialization logic in the current stmmac_xpcs_setup() function. Rename stmmac_xpcs_setup() to stmmac_pcs_setup() and move the conditional call to stmmac_xpcs_setup() inside the function itself. Signed-off-by:
-
Serge Semin authored
Currently the XPCS handler destruction is performed in the stmmac_mdio_unregister() method. It doesn't look good because the handler isn't originally created in the corresponding protagonist stmmac_mdio_unregister(), but in the stmmac_xpcs_setup() function. In order to have more coherent MDIO and XPCS setup/cleanup procedures, let's move the DW XPCS destruction to the dedicated stmmac_pcs_clean() method. This method will also be used to cleanup PCS hardware using the pcs_exit() callback that will be introduced to stmmac in a subsequent patch. Signed-off-by:
-
Clément Léger authored
The RZ/N1 series of MPUs feature up to two Gigabit Ethernet controllers. These controllers are based on Synopsys IPs. They can be connected to RZ/N1 RGMII/RMII converters. Add a binding that describes these GMAC devices. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
This driver currently doesn't support any control flags. Use flow_rule_match_has_control_flags() to check for control flags, such as can be set through `tc flower ... ip_flags frag`. In case any control flags are masked, flow_rule_match_has_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile-tested. Signed-off-by:
Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by:
-
Jakub Kicinski authored
Xuan Zhuo says: ==================== virtio_net: rx enable premapped mode by default Actually, for the virtio drivers, we can enable premapped mode whatever the value of use_dma_api. Because we provide the virtio dma apis. So the driver can enable premapped mode unconditionally. This patch set makes the big mode of virtio-net to support premapped mode. And enable premapped mode for rx by default. Based on the following points, we do not use page pool to manage these pages: 1. virtio-net uses the DMA APIs wrapped by virtio core. Therefore, we can only prevent the page pool from performing DMA operations, and let the driver perform DMA operations on the allocated pages. 2. But when the page pool releases the page, we have no chance to execute dma unmap. 3. A solution to #2 is to execute dma unmap every time before putting the page back to the page pool. (This is actually a waste, we don't execute unmap so frequently.) 4. But there is another problem, we still need to use page.dma_addr to save the dma address. Using page.dma_addr while using page pool is unsafe behavior. 5. And we need space the chain the pages submitted once to virtio core. More: https://lore.kernel.org/all/CACGkMEu=Aok9z2imB_c5qVuujSh=vjj1kx12fy9N7hqyi+M5Ow@mail.gmail.com/ Why we do not use the page space to store the dma? http://lore.kernel.org/all/CACGkMEuyeJ9mMgYnnB42=hw6umNuo=agn7VBqBqYPd7GN=+39Q@mail.gmail.com ==================== Link: https://lore.kernel.org/r/20240511031404.30903-1-xuanzhuo@linux.alibaba.comSigned-off-by: -
Xuan Zhuo authored
We call the build_skb() actually without copying data. The comment is misleading. So remove it. Signed-off-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by:
Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20240511031404.30903-5-xuanzhuo@linux.alibaba.comSigned-off-by:
-
Xuan Zhuo authored
Now, the premapped mode can be enabled unconditionally. So we can remove the failover code for merge and small mode. Signed-off-by:
Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/20240511031404.30903-4-xuanzhuo@linux.alibaba.comSigned-off-by:
-
