- 20 Oct, 2011 1 commit
-
-
John Crispin authored
The 2 functions add_mtd_partitions and del_mtd_partitions were renamed to mtd_device_register and mtd_device_unregister. Signed-of-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2463/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
- 18 Oct, 2011 1 commit
-
-
Linus Torvalds authored
-
- 17 Oct, 2011 1 commit
-
-
Linus Torvalds authored
The size is always valid, but variable-length arrays generate worse code for no good reason (unless the function happens to be inlined and the compiler sees the length for the simple constant it is). Also, there seems to be some code generation problem on POWER, where Henrik Bakken reports that register r28 can get corrupted under some subtle circumstances (interrupt happening at the wrong time?). That all indicates some seriously broken compiler issues, but since variable length arrays are bad regardless, there's little point in trying to chase it down. "Just don't do that, then". Reported-by: Henrik Grindal Bakken <henribak@cisco.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 16 Oct, 2011 1 commit
-
-
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-armLinus Torvalds authored
* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7128/1: vic: Don't write to the read-only register VIC_IRQ_STATUS ARM: 7122/1: localtimer: add header linux/errno.h explicitly ARM: 7117/1: perf: fix HW_CACHE_* events on Cortex-A9 ARM: 7113/1: mm: Align bank start to MAX_ORDER_NR_PAGES
-
- 15 Oct, 2011 3 commits
-
-
Zoltan Devai authored
This is unneeded and causes an abort on the SPMP8000 platform. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Zoltan Devai <zoss@devai.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Shawn Guo authored
Per the text in Documentation/SubmitChecklist as below, we should explicitly have header linux/errno.h in localtimer.h for ENXIO reference. 1: If you use a facility then #include the file that defines/declares that facility. Don't depend on other header files pulling in ones that you use. Otherwise, we may run into some compiling error like the following one, if any file includes localtimer.h without CONFIG_LOCAL_TIMERS defined. arch/arm/include/asm/localtimer.h: In function ‘local_timer_setup’: arch/arm/include/asm/localtimer.h:53:10: error: ‘ENXIO’ undeclared (first use in this function) Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Will Deacon authored
Using COHERENT_LINE_{MISS,HIT} for cache misses and references respectively is completely wrong. Instead, use the L1D events which are a better and more useful approximation despite ignoring instruction traffic. Reported-by: Alasdair Grant <alasdair.grant@arm.com> Reported-by: Matt Horsnell <matt.horsnell@arm.com> Reported-by: Michael Williams <michael.williams@arm.com> Cc: stable@kernel.org Cc: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 14 Oct, 2011 6 commits
-
-
Linus Torvalds authored
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (w83627ehf) Properly report thermal diode sensors
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6: gpio-pca953x: fix gpio_base gpio/omap: fix build error with certain OMAP1 configs
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: revert to using a kthread for AIL pushing xfs: force the log if we encounter pinned buffers in .iop_pushbuf xfs: do not update xa_last_pushed_lsn for locked items
-
git://github.com/cmetcalf-tilera/linux-tileLinus Torvalds authored
* 'stable' of git://github.com/cmetcalf-tilera/linux-tile: tile: revert change from <asm/atomic.h> to <linux/atomic.h> in asm files
-
git://tesla.tglx.de/git/linux-2.6-tipLinus Torvalds authored
* 'x86-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: x86: Default to vsyscall=native for now
-
Mika Westerberg authored
SFI tables reside in RAM and should not be modified once they are written. Current code went to set pentry->irq to zero which causes subsequent reads to fail with invalid SFI table checksum. This will break kexec as the second kernel fails to validate SFI tables. To fix this we use temporary variable for irq number. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 13 Oct, 2011 7 commits
-
-
Jean Delvare authored
The w83627ehf driver is improperly reporting thermal diode sensors as type 2, instead of 3. This caused "sensors" and possibly other monitoring tools to report these sensors as "transistor" instead of "thermal diode". Furthermore, diode subtype selection (CPU vs. external) is only supported by the original W83627EHF/EHG. All later models only support CPU diode type, and some (NCT6776F) don't even have the register in question so we should avoid reading from it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
-
Hartmut Knaack authored
gpio_base was set to 0 if no system platform data or open firmware platform data was provided. This led to conflicts, if any other gpiochip with a gpiobase of 0 was instantiated already. Setting it to -1 will automatically use the first one available. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-
Janusz Krzysztofik authored
With commit f64ad1a0, "gpio/omap: cleanup _set_gpio_wakeup(), remove ifdefs", access to build time conditionally omitted 'suspend_wakeup' member of the 'gpio_bank' structure has been placed unconditionally in function _set_gpio_wakeup(), which is always built. This resulted in the driver compilation broken for certain OMAP1, i.e., non-OMAP16xx, configurations. Really required or not in previously excluded cases, define this structure member unconditionally as a fix. Tested with a custom OMAP1510 only configuration. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Kevin Hilman <khilman@ti.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-
Chris Metcalf authored
The 32-bit TILEPro support uses some #defines in <asm/atomic_32.h> for atomic support routines in assembly. To make this more explicit, I've turned those includes into includes of <asm/atomic_32.h>, which should hopefully make it clear that they shouldn't be bombed into <linux/atomic.h> in any cleanups. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: mscan: too much data copied to CAN frame due to 16 bit accesses gro: refetch inet6_protos[] after pulling ext headers bnx2x: fix cl_id allocation for non-eth clients for NPAR mode mlx4_en: fix endianness with blue frame support
-
Johann Felix Soden authored
Fix file references in drivers/ide/ There are a lot of file references to now moved or deleted files in the whole tree, especially in documentation and Kconfig files. This patch fixes the references in drivers/ide/. Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/chrismason/linuxLinus Torvalds authored
* 'btrfs-3.0' of git://github.com/chrismason/linux: Btrfs: make sure not to defrag extents past i_size Btrfs: fix recursive auto-defrag
-
- 11 Oct, 2011 5 commits
-
-
Christoph Hellwig authored
Currently we have a few issues with the way the workqueue code is used to implement AIL pushing: - it accidentally uses the same workqueue as the syncer action, and thus can be prevented from running if there are enough sync actions active in the system. - it doesn't use the HIGHPRI flag to queue at the head of the queue of work items At this point I'm not confident enough in getting all the workqueue flags and tweaks right to provide a perfectly reliable execution context for AIL pushing, which is the most important piece in XFS to make forward progress when the log fills. Revert back to use a kthread per filesystem which fixes all the above issues at the cost of having a task struct and stack around for each mounted filesystem. In addition this also gives us much better ways to diagnose any issues involving hung AIL pushing and removes a small amount of code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Stefan Priebe <s.priebe@profihost.ag> Tested-by: Stefan Priebe <s.priebe@profihost.ag> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
-
Christoph Hellwig authored
We need to check for pinned buffers even in .iop_pushbuf given that inode items flush into the same buffers that may be pinned directly due operations on the unlinked inode list operating directly on buffers. To do this add a return value to .iop_pushbuf that tells the AIL push about this and use the existing log force mechanisms to unpin it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Stefan Priebe <s.priebe@profihost.ag> Tested-by: Stefan Priebe <s.priebe@profihost.ag> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
-
Christoph Hellwig authored
If an item was locked we should not update xa_last_pushed_lsn and thus skip it when restarting the AIL scan as we need to be able to lock and write it out as soon as possible. Otherwise heavy lock contention might starve AIL pushing too easily, especially given the larger backoff once we moved xa_last_pushed_lsn all the way to the target lsn. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Stefan Priebe <s.priebe@profihost.ag> Tested-by: Stefan Priebe <s.priebe@profihost.ag> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
-
Chris Mason authored
The btrfs file defrag code will loop through the extents and force COW on them. But there is a concurrent truncate in the middle of the defrag, it might end up defragging the same range over and over again. The problem is that writepage won't go through and do anything on pages past i_size, so the cow won't happen, so the file will appear to still be fragmented. defrag will end up hitting the same extents again and again. In the worst case, the truncate can actually live lock with the defrag because the defrag keeps creating new ordered extents which the truncate code keeps waiting on. The fix here is to make defrag check for i_size inside the main loop, instead of just once before the looping starts. Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Adrian Bunk authored
This UML breakage: linux-2.6.30.1[3800] vsyscall fault (exploit attempt?) ip:ffffffffff600000 cs:33 sp:7fbfb9c498 ax:ffffffffff600000 si:0 di:606790 linux-2.6.30.1[3856] vsyscall fault (exploit attempt?) ip:ffffffffff600000 cs:33 sp:7fbfb13168 ax:ffffffffff600000 si:0 di:606790 Is caused by commit 3ae36655 ("x86-64: Rework vsyscall emulation and add vsyscall= parameter") - the vsyscall emulation code is not fully cooked yet as UML relies on some rather fragile SIGSEGV semantics. Linus suggested in https://lkml.org/lkml/2011/8/9/376 to default to vsyscall=native for now, this patch implements that. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Andrew Lutomirski <luto@mit.edu> Cc: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/20111005214047.GE14406@localhost.pp.htv.fiSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
- 10 Oct, 2011 11 commits
-
-
Li Zefan authored
Follow those steps: # mount -o autodefrag /dev/sda7 /mnt # dd if=/dev/urandom of=/mnt/tmp bs=200K count=1 # sync # dd if=/dev/urandom of=/mnt/tmp bs=8K count=1 conv=notrunc and then it'll go into a loop: writeback -> defrag -> writeback ... It's because writeback writes [8K, 200K] and then writes [0, 8K]. I tried to make writeback know if the pages are dirtied by defrag, but the patch was a bit intrusive. Here I simply set writeback_index when we defrag a file. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Wolfgang Grandegger authored
Due to the 16 bit access to mscan registers there's too much data copied to the zero initialized CAN frame when having an odd number of bytes to copy. This patch ensures that only the requested bytes are copied by using an 8 bit access for the remaining byte. Reported-by: Andre Naujoks <nautsch@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yan, Zheng authored
ipv6_gro_receive() doesn't update the protocol ops after pulling the ext headers. It looks like a typo. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Kravkov authored
There are some consolidations of NPAR configuration when FCoE and iSCSI L2 clients will get the same id, in this case FCoE ring will be non-functional. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thadeu Lima de Souza Cascardo authored
The doorbell register was being unconditionally swapped. In x86, that meant it was being swapped to BE and written to the descriptor and to memory, depending on the case of blue frame support or writing to doorbell register. On PPC, this meant it was being swapped to LE and then swapped back to BE while writing to the register. But in the blue frame case, it was being written as LE to the descriptor. The fix is not to swap doorbell unconditionally, write it to the register as BE and convert it to BE when writing it to the descriptor. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Reported-by: Richard Hendrickson <richhend@us.ibm.com> Cc: Eli Cohen <eli@dev.mellanox.co.il> Cc: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
* git://git.samba.org/sfrench/cifs-2.6: [CIFS] Fix first time message on mount, ntlmv2 upgrade delayed to 3.2
-
git://git.linaro.org/people/arnd/arm-socLinus Torvalds authored
* 'fixes' of git://git.linaro.org/people/arnd/arm-soc: ARM: mach-ux500: enable fix for ARM errata 754322 ARM: OMAP: musb: Remove a redundant omap4430_phy_init call in usb_musb_init ARM: OMAP: Fix i2c init for twl4030 ARM: OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1
-
Marc Dietrich authored
This fixes a compilation error in cpu-tegra.c which was introduced in dc8d966b ("ARM: convert PCI defines to variables") which removed the now obsolete mach/hardware.h from the mach-tegra subtree. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: use hardcoded dig encoder to transmitter mapping for DCE4.1 drm/radeon/kms: fix dp_detect handling for DP bridge chips drm/radeon/kms: retry aux transactions if there are status flags
-
Olof Johansson authored
A couple of changes to the Tegra maintainership setup: I'm very glad to bring on Stephen Warren on board as a maintainer. The work he has done so far is excellent, and the fact that he works for Nvidia means he has long-term interest in the platform. Erik Gilling did an astounding amount of work on getting things up and running but has been a silent partner on the maintainership side for a while, and is stepping down. Thanks for your contributions so far, Erik. Finally, update the git URL since I'll take over running the main repo for a while. Overall maintainership model isn't changing much at this time: We'll all three review patches as appropriate, and one of us will collect the main repo (me at this time). Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Erik Gilling <konkers@android.com> Acked-by: Colin Cross <ccross@android.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (29 commits) MIPS: Call oops_enter, oops_exit in die staging/octeon: Software should check the checksum of no tcp/udp packets MIPS: Octeon: Enable C0_UserLocal probing. MIPS: No branches in delay slots for huge pages in handle_tlbl MIPS: Don't clobber CP0_STATUS value for CONFIG_MIPS_MT_SMTC MIPS: Octeon: Select CONFIG_HOLES_IN_ZONE MIPS: PM: Use struct syscore_ops instead of sysdevs for PM (v2) MIPS: Compat: Use 32-bit wrapper for compat_sys_futex. MIPS: Do not use EXTRA_CFLAGS MIPS: Alchemy: DB1200: Disable cascade IRQ in handler SERIAL: Lantiq: Set timeout in uart_port MIPS: Lantiq: Fix setting the PCI bus speed on AR9 MIPS: Lantiq: Fix external interrupt sources MIPS: tlbex: Fix build error in R3000 code. MIPS: Alchemy: Include Au1100 in PM code. MIPS: Alchemy: Fix typo in MAC0 registration MIPS: MSP71xx: Fix build error. MIPS: Handle __put_user() sleeping. MIPS: Allow forced irq threading MIPS: i8259: Mark cascade interrupt non-threaded ...
-
- 08 Oct, 2011 2 commits
-
-
Arnd Bergmann authored
-
Steve French authored
Microsoft has a bug with ntlmv2 that requires use of ntlmssp, but we didn't get the required information on when/how to use ntlmssp to old (but once very popular) legacy servers (various NT4 fixpacks for example) until too late to merge for 3.1. Will upgrade to NTLMv2 in NTLMSSP in 3.2 Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com>
-
- 07 Oct, 2011 1 commit
-
-
srinidhi kasagar authored
This applies ARM errata fix 754322 for all ux500 platforms. Cc: stable@kernel.org Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 06 Oct, 2011 1 commit
-
-
git://github.com/davem330/netLinus Torvalds authored
* git://github.com/davem330/net: net: fix typos in Documentation/networking/scaling.txt bridge: leave carrier on for empty bridge netfilter: Use proper rwlock init function tcp: properly update lost_cnt_hint during shifting tcp: properly handle md5sig_pool references macvlan/macvtap: Fix unicast between macvtap interfaces in bridge mode
-