Replace kfree_skb() which is used in ip6_forward() and ip_forward()
with kfree_skb_reason().

The new drop reason 'SKB_DROP_REASON_PKT_TOO_BIG' is introduced for
the case that the length of the packet exceeds MTU and can't
fragment.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace kfree_skb() used in ip6_pkt_drop() with kfree_skb_reason().
No new reason is added.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eventually, I find out the handler function for inputting route lookup
fail: ip_error().

The drop reasons we used in ip_error() are almost corresponding to
IPSTATS_MIB_*, and following new reasons are introduced:

SKB_DROP_REASON_IP_INADDRERRORS
SKB_DROP_REASON_IP_INNOROUTES

Isn't the name SKB_DROP_REASON_IP_HOSTUNREACH and
SKB_DROP_REASON_IP_NETUNREACH more accurate? To make them corresponding
to IPSTATS_MIB_*, we keep their name still.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to simply the definition and assignment for
'enum skb_drop_reason', introduce some helpers.

SKB_DR() is used to define a variable of type 'enum skb_drop_reason'
with the 'SKB_DROP_REASON_NOT_SPECIFIED' initial value.

SKB_DR_SET() is used to set the value of the variable. Seems it is
a little useless? But it makes the code shorter.

SKB_DR_OR() is used to set the value of the variable if it is not set
yet, which means its value is SKB_DROP_REASON_NOT_SPECIFIED.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Veerasenareddy Burru says:

====================
Add octeon_ep driver

This driver implements networking functionality of Marvell's Octeon
PCI Endpoint NIC.

This driver support following devices:
 * Network controller: Cavium, Inc. Device b200

V4 -> V5:
   - Fix warnings reported by clang.
   - Address comments from community reviews.

V3 -> V4:
   - Fix warnings and errors reported by "make W=1 C=1".

V2 -> V3:
   - Fix warnings and errors reported by kernel test robot:
     "Reported-by: kernel test robot <lkp@intel.com>"

V1 -> V2:
    - Address review comments on original patch series.
    - Divide PATCH 1/4 from the original series into 4 patches in
      v2 patch series: PATCH 1/7 to PATCH 4/7.
    - Fix clang build errors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for the following ethtool commands:

ethtool -i|--driver devname
ethtool devname
ethtool -s devname [speed N] [autoneg on|off] [advertise N]
ethtool -S|--statistics devname
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to enable MSI-x and register interrupts.
Add support to process Tx and Rx traffic. Includes processing
Tx completions and Rx refill.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for ndo ops to set MAC address, change MTU, get stats.
Add control path support to set MAC address, change MTU, get stats,
set speed, get and set link mode.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement Tx/Rx ring resource allocation and cleanup.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add mailbox between host and NIC to send control commands from host to
NIC and receive responses and notifications from NIC to host driver,
like link status update.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement hardware resource init and shutdown helper APIs.
This includes hardware Tx/Rx queue init/enable/disable/reset,
non queue interrupt handler that decodes non-queue interrupt type.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add driver framework and device setup and initialization for Octeon
PCI Endpoint NIC.

Add implementation to load module, initilaize, register network device,
cleanup and unload module.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says:

====================
net: bridge: add flush filtering support

This patch-set adds support to specify filtering conditions for a bulk
delete (flush) operation. This version uses a new nlmsghdr delete flag
called NLM_F_BULK in combination with a new ndo_fdb_del_bulk op which is
used to signal that the driver supports bulk deletes (that avoids
pushing common mac address checks to ndo_fdb_del implementations and
also has a different prototype and parsed attribute expectations, more
info in patch 03). The new delete flag can be used for any RTM_DEL*
type, implementations just need to be careful with older kernels which
are doing non-strict attribute parses. A new rtnl flag
(RTNL_FLAG_BULK_DEL_SUPPORTED) is used to show that the delete supports
NLM_F_BULK. A proper error is returned if bulk delete is not supported.
For old kernels I use the fact that mac address attribute (lladdr) is
mandatory in the classic fdb del case, but it's not allowed if bulk
deleting so older kernels will error out.

Patch 01 and 02 are minor rtnetlink cleanups to make the code easier to
read. They remove hardcoded values and use names instead. Patch 03 uses
BIT() for rtnl flags.
Patch 04 adds the new NLM_F_BULK delete request modifier, patch 05 adds
the new bulk delete flag and checks for it if the delete requests have
NLM_F_BULK set, it also warns if rtnl register is called with a non-delete
kind and the bulk delete flag is set.
Patch 06 adds the new ndo_fdb_del_bulk call. Patch 07 adds NLM_F_BULK
support to rtnl_fdb_del, on such request strict parsing is used only for
the supported attributes, and if the ndo is implemented it's called, the
NTF_SELF/MASTER rules are the same as for the standard rtnl_fdb_del.
Patch 08 implements bridge-specific minimal ndo_fdb_del_bulk call which
uses the current br_fdb_flush to delete all entries. Patch 09 adds
filtering support to the new bridge flush op which supports target
ifindex (port or bridge), vlan id and flags/state mask. Patch 10 adds
ndm state and flags mask attributes which will be used for filtering.
Patch 11 converts ndm state/flags and their masks to bridge-private flags
and fills them in the filter descriptor for matching. Finally patch 12
fills in the target ifindex (after validating it) and vlan id (already
validated by rtnl_fdb_flush) for matching. Flush filtering is needed
because user-space applications need a quick way to delete only a
specific set of entries, e.g. mlag implementations need a way to flush only
dynamic entries excluding externally learned ones or only externally
learned ones without static entries etc. Also apps usually want to target
only a specific vlan or port/vlan combination. The current 2 flush
operations (per port and bridge-wide) are not extensible and cannot
provide such filtering.

I decided against embedding new attrs into the old flush attributes for
multiple reasons - proper error handling on unsupported attributes,
older kernels silently flushing all, need for a second mechanism to
signal that the attribute should be parsed (e.g. using boolopts),
special treatment for permanent entries.

Examples:
$ bridge fdb flush dev bridge vlan 100 static
< flush all static entries on vlan 100 >
$ bridge fdb flush dev bridge vlan 1 dynamic
< flush all dynamic entries on vlan 1 >
$ bridge fdb flush dev bridge port ens16 vlan 1 dynamic
< flush all dynamic entries on port ens16 and vlan 1 >
$ bridge fdb flush dev ens16 vlan 1 dynamic master
< as above: flush all dynamic entries on port ens16 and vlan 1 >
$ bridge fdb flush dev bridge nooffloaded nopermanent self
< flush all non-offloaded and non-permanent entries >
$ bridge fdb flush dev bridge static noextern_learn
< flush all static entries which are not externally learned >
$ bridge fdb flush dev bridge permanent
< flush all permanent entries >
$ bridge fdb flush dev bridge port bridge permanent
< flush all permanent entries pointing to the bridge itself >

Example of a flush call with unsupported netlink attribute (NDA_DST):
$ bridge fdb flush dev bridge vlan 100 dynamic dst
Error: Unsupported attribute.

Example of a flush call on an older kernel:
$ bridge fdb flush dev bridge dynamic
Error: invalid address.

Example of calling PF_UNSPEC RTM_DELNEIGH which doesn't support bulk delete
with NLM_F_BULK set (ip neigh is changed to add the flag):
$ ip n del 192.168.122.5 lladdr 00:11:22:33:44:55 dev ens3
Error: Bulk delete is not supported.

Note that all flags have their negated version (static vs nostatic etc)
and there are some tricky cases to handle like "static" which in flag
terms means fdbs that have NUD_NOARP but *not* NUD_PERMANENT, so the
mask matches on both but we need only NUD_NOARP to be set. That's
because permanent entries have both set so we can't just match on
NUD_NOARP. Also note that this flush operation doesn't treat permanent
entries in a special way (fdb_delete vs fdb_delete_local), it will
delete them regardless if any port is using them. We can extend the api
with a flag to do that if needed in the future.

Patch-sets (in order):
 - Initial bulk del infra and fdb flush filtering (this set)
 - iproute2 support
 - selftests

v4: Add and check for rtnl del bulk supported flag when using
    NLM_F_BULK (new patch 05), patches 01 - 03 are also new minor cleanups
    to remove use of raw values and make code easier to read, don't
    rename br_fdb_flush in patch 08, set port ifindex as flush target if
    NDA_IFINDEX is missing and flush was called with port netdev and
    NTF_MASTER (patch 12).

v3: Add NLM_F_BULK delete modifier and ndo_fdb_del_bulk callback,
    patches 01 - 03 and 06 are new. Patch 04 is changed to implement
    bulk_del instead of flush, patches 05, 07 and 08 are adjusted to
    use NDA_ attributes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for fdb flush filtering based on destination ifindex and
vlan id. The ifindex must either match a port's device ifindex or the
bridge's. The vlan support is trivial since it's already validated by
rtnl_fdb_del, we just need to fill it in.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for fdb flush filtering based on ndm flags and state. NDM
state and flags are mapped to bridge-specific flags and matched
according to the specified masks. NTF_USE is used to represent
added_by_user flag since it sets it on fdb add and we don't have a 1:1
mapping for it. Only allowed bits can be set, NTF_SELF and NTF_MASTER are
ignored.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add ndm flags/state masks which will be used for bulk delete filtering.
All of these are used by the bridge and vxlan drivers. Also minimal attr
policy validation is added, it is up to ndo_fdb_del_bulk implementers to
further validate them.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the ability to specify exactly which fdbs to be flushed. They are
described by a new structure - net_bridge_fdb_flush_desc. Currently it
can match on port/bridge ifindex, vlan id and fdb flags. It is used to
describe the existing dynamic fdb flush operation. Note that this flush
operation doesn't treat permanent entries in a special way (fdb_delete vs
fdb_delete_local), it will delete them regardless if any port is using
them, so currently it can't directly replace deletes which need to handle
that case, although we can extend it later for that too.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a minimal ndo_fdb_del_bulk implementation which flushes all entries.
Support for more fine-grained filtering will be added in the following
patches.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When NLM_F_BULK is specified in a fdb del message we need to handle it
differently. First since this is a new call we can strictly validate the
passed attributes, at first only ifindex and vlan are allowed as these
will be the initially supported filter attributes, any other attribute
is rejected. The mac address is no longer mandatory, but we use it
to error out in older kernels because it cannot be specified with bulk
request (the attribute is not allowed) and then we have to dispatch
the call to ndo_fdb_del_bulk if the device supports it. The del bulk
callback can do further validation of the attributes if necessary.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new netdev op called ndo_fdb_del_bulk, it will be later used for
driver-specific bulk delete implementation dispatched from rtnetlink. The
first user will be the bridge, we need it to signal to rtnetlink from
the driver that we support bulk delete operation (NLM_F_BULK).
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new rtnl flag (RTNL_FLAG_BULK_DEL_SUPPORTED) which is used to
verify that the delete operation allows bulk object deletion. Also emit
a warning if anyone tries to set it for non-delete kind.
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new delete request modifier called NLM_F_BULK which, when
supported, would cause the request to delete multiple objects. The flag
is a convenient way to signal that a multiple delete operation is
requested which can be gradually added to different delete requests. In
order to make sure older kernels will error out if the operation is not
supported instead of doing something unintended we have to break a
required condition when implementing support for this flag, f.e. for
neighbors we will omit the mandatory mac address attribute.
Initially it will be used to add flush with filtering support for bridge
fdbs, but it also opens the door to add similar support to others.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use BIT to define flag values.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a helper which extracts the msg type's kind using the kind mask (0x3).
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add rtnl kind names instead of using raw values. We'll need to
check for DEL kind later to validate bulk flag support.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Grygorii Strashko says:

====================
net: ethernet: ti: enable bc/mc storm prevention support

This series first adds supports for the ALE feature to rate limit number ingress
broadcast(BC)/multicast(MC) packets per/sec which main purpose is BC/MC storm
prevention.

And then enables corresponding support for ingress broadcast(BC)/multicast(MC)
packets rate limiting for TI CPSW switchdev and AM65x/J221E CPSW_NUSS drivers by
implementing HW offload for simple tc-flower with policer action with matches
on dst_mac/mask:
 - ff:ff:ff:ff:ff:ff/ff:ff:ff:ff:ff:ff has to be used for BC packets rate
limiting (exact match)
 - 01:00:00:00:00:00/01:00:00:00:00:00 fixed value has to be used for MC
packets rate limiting

The CPSW supports MC/BC packets rate limiting in packets/sec and affects
all ingress MC/BC packets and serves as BC/MC storm prevention feature.

Examples:
- BC rate limit to 1000pps:
  tc qdisc add dev eth0 clsact
  tc filter add dev eth0 ingress flower skip_sw dst_mac ff:ff:ff:ff:ff:ff \
  action police pkts_rate 1000 pkts_burst 1 drop

- MC rate limit to 20000pps:
  tc qdisc add dev eth0 clsact
  tc filter add dev eth0 ingress flower skip_sw dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 \
  action police rate pkts_rate 20000 pkts_burst 1 drop

  pkts_burst - not used.

The solution inspired patch from Vladimir Oltean [1].

Changes in v3:
  - comments applied
  - policer validation added

Changes in v2:
 - switch to packet-per-second policing introduced by
   commit 2ffe0395 ("net/sched: act_police: add support for packet-per-second policing") [2]

v2: https://patchwork.kernel.org/project/netdevbpf/cover/20211101170122.19160-1-grygorii.strashko@ti.com/
v1: https://patchwork.kernel.org/project/netdevbpf/cover/20201114035654.32658-1-grygorii.strashko@ti.com/

[1] https://lore.kernel.org/patchwork/patch/1217254/
[2] https://patchwork.kernel.org/project/netdevbpf/cover/20210312140831.23346-1-simon.horman@netronome.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables support for ingress broadcast(BC)/multicast(MC) packets
rate limiting in TI CPSW switchdev driver (the corresponding ALE support
was added in previous patch) by implementing HW offload for simple
tc-flower with policer action with matches on dst_mac:
 - ff:ff:ff:ff:ff:ff/ff:ff:ff:ff:ff:ff has to be used for BC packets rate
limiting (exact match)
 - 01:00:00:00:00:00/01:00:00:00:00:00 fixed value has to be used for MC
packets rate limiting

The CPSW supports MC/BC packets rate limiting in packets/sec and affects
all ingress MC/BC packets and serves as BC/MC storm prevention feature.

Examples:
- BC rate limit to 1000pps:
  tc qdisc add dev eth0 clsact
  tc filter add dev eth0 ingress flower skip_sw dst_mac ff:ff:ff:ff:ff:ff \
  action police pkts_rate 1000 pkts_burst 1 drop

- MC rate limit to 20000pps:
  tc qdisc add dev eth0 clsact
  tc filter add dev eth0 ingress flower skip_sw dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 \
  action police rate pkts_rate 10000 pkts_burst 1 drop

  pkts_burst - not used.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables support for ingress broadcast(BC)/multicast(MC) packets
rate limiting in TI AM65x CPSW driver (the corresponding ALE support was
added in previous patch) by implementing HW offload for simple tc-flower
with policer action with matches on dst_mac/mask:
 - ff:ff:ff:ff:ff:ff/ff:ff:ff:ff:ff:ff has to be used for BC packets rate
limiting (exact match)
 - 01:00:00:00:00:00/01:00:00:00:00:00 fixed value has to be used for MC
packets rate limiting

The CPSW supports MC/BC packets rate limiting in packets/sec and affects
all ingress MC/BC packets and serves as BC/MC storm prevention feature.

Examples:
- BC rate limit to 1000pps:
  tc qdisc add dev eth0 clsact
  tc filter add dev eth0 ingress flower skip_sw dst_mac ff:ff:ff:ff:ff:ff \
  action police pkts_rate 1000 pkts_burst 1 drop

- MC rate limit to 20000pps:
  tc qdisc add dev eth0 clsact
  tc filter add dev eth0 ingress flower skip_sw dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 \
  action police rate pkts_rate 20000 pkts_burst 1 drop

  pkts_burst - not used.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The CPSW ALE supports feature to rate limit number ingress
broadcast(BC)/multicast(MC) packets per/sec which main purpose is BC/MC
storm prevention.

The ALE BC/MC packet rate limit configuration consist of two parts:
- global
  ALE_CONTROL.ENABLE_RATE_LIMIT bit 0 which enables rate limiting globally
  ALE_PRESCALE.PRESCALE specifies rate limiting interval
- per-port
  ALE_PORTCTLx.BCASTMCAST/_LIMIT specifies number of BC/MC packets allowed
  per rate limiting interval.
  When port.BCASTMCAST/_LIMIT is 0 rate limiting is disabled for Port.

When BC/MC packet rate limiting is enabled the number of allowed packets
per/sec is defined as:
  number_of_packets/sec = (Fclk / ALE_PRESCALE) * port.BCASTMCAST/_LIMIT

Hence, the ALE_PRESCALE configuration is common for all ports the 1ms
interval is selected and configured during ALE initialization while
port.BCAST/MCAST_LIMIT are configured per-port.
This allows to achieve:
 - min number_of_packets = 1000 when port.BCAST/MCAST_LIMIT = 1
 - max number_of_packets = 1000 * 255 = 255000
   when port.BCAST/MCAST_LIMIT = 0xFF

The ALE_CONTROL.ENABLE_RATE_LIMIT can also be enabled once during ALE
initialization as rate limiting enabled by non zero port.BCASTMCAST/_LIMIT
values.

This patch implements above logic in ALE and adds new ALE APIs
 cpsw_ale_rx_ratelimit_bc();
 cpsw_ale_rx_ratelimit_mc();
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As there are now no users of phylink_helper_basex_speed(), we can
remove this obsolete functionality.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

The __mtk_foe_entry_clear() function frees "entry" so we have to use
the _safe() version of hlist_for_each_entry() to prevent a use after
free.

Fixes: 33fc42de ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 3e3b5dfc ("NFC: reorder the logic in nfc_{un,}register_device")
assumes the device_is_registered() in function nfc_dev_up() will help
to check when the rfkill is unregistered. However, this check only
take effect when device_del(&dev->dev) is done in nfc_unregister_device().
Hence, the rfkill object is still possible be dereferenced.

The crash trace in latest kernel (5.18-rc2):

[   68.760105] ==================================================================
[   68.760330] BUG: KASAN: use-after-free in __lock_acquire+0x3ec1/0x6750
[   68.760756] Read of size 8 at addr ffff888009c93018 by task fuzz/313
[   68.760756]
[   68.760756] CPU: 0 PID: 313 Comm: fuzz Not tainted 5.18.0-rc2 #4
[   68.760756] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[   68.760756] Call Trace:
[   68.760756]  <TASK>
[   68.760756]  dump_stack_lvl+0x57/0x7d
[   68.760756]  print_report.cold+0x5e/0x5db
[   68.760756]  ? __lock_acquire+0x3ec1/0x6750
[   68.760756]  kasan_report+0xbe/0x1c0
[   68.760756]  ? __lock_acquire+0x3ec1/0x6750
[   68.760756]  __lock_acquire+0x3ec1/0x6750
[   68.760756]  ? lockdep_hardirqs_on_prepare+0x410/0x410
[   68.760756]  ? register_lock_class+0x18d0/0x18d0
[   68.760756]  lock_acquire+0x1ac/0x4f0
[   68.760756]  ? rfkill_blocked+0xe/0x60
[   68.760756]  ? lockdep_hardirqs_on_prepare+0x410/0x410
[   68.760756]  ? mutex_lock_io_nested+0x12c0/0x12c0
[   68.760756]  ? nla_get_range_signed+0x540/0x540
[   68.760756]  ? _raw_spin_lock_irqsave+0x4e/0x50
[   68.760756]  _raw_spin_lock_irqsave+0x39/0x50
[   68.760756]  ? rfkill_blocked+0xe/0x60
[   68.760756]  rfkill_blocked+0xe/0x60
[   68.760756]  nfc_dev_up+0x84/0x260
[   68.760756]  nfc_genl_dev_up+0x90/0xe0
[   68.760756]  genl_family_rcv_msg_doit+0x1f4/0x2f0
[   68.760756]  ? genl_family_rcv_msg_attrs_parse.constprop.0+0x230/0x230
[   68.760756]  ? security_capable+0x51/0x90
[   68.760756]  genl_rcv_msg+0x280/0x500
[   68.760756]  ? genl_get_cmd+0x3c0/0x3c0
[   68.760756]  ? lock_acquire+0x1ac/0x4f0
[   68.760756]  ? nfc_genl_dev_down+0xe0/0xe0
[   68.760756]  ? lockdep_hardirqs_on_prepare+0x410/0x410
[   68.760756]  netlink_rcv_skb+0x11b/0x340
[   68.760756]  ? genl_get_cmd+0x3c0/0x3c0
[   68.760756]  ? netlink_ack+0x9c0/0x9c0
[   68.760756]  ? netlink_deliver_tap+0x136/0xb00
[   68.760756]  genl_rcv+0x1f/0x30
[   68.760756]  netlink_unicast+0x430/0x710
[   68.760756]  ? memset+0x20/0x40
[   68.760756]  ? netlink_attachskb+0x740/0x740
[   68.760756]  ? __build_skb_around+0x1f4/0x2a0
[   68.760756]  netlink_sendmsg+0x75d/0xc00
[   68.760756]  ? netlink_unicast+0x710/0x710
[   68.760756]  ? netlink_unicast+0x710/0x710
[   68.760756]  sock_sendmsg+0xdf/0x110
[   68.760756]  __sys_sendto+0x19e/0x270
[   68.760756]  ? __ia32_sys_getpeername+0xa0/0xa0
[   68.760756]  ? fd_install+0x178/0x4c0
[   68.760756]  ? fd_install+0x195/0x4c0
[   68.760756]  ? kernel_fpu_begin_mask+0x1c0/0x1c0
[   68.760756]  __x64_sys_sendto+0xd8/0x1b0
[   68.760756]  ? lockdep_hardirqs_on+0xbf/0x130
[   68.760756]  ? syscall_enter_from_user_mode+0x1d/0x50
[   68.760756]  do_syscall_64+0x3b/0x90
[   68.760756]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   68.760756] RIP: 0033:0x7f67fb50e6b3
...
[   68.760756] RSP: 002b:00007f67fa91fe90 EFLAGS: 00000293 ORIG_RAX: 000000000000002c
[   68.760756] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f67fb50e6b3
[   68.760756] RDX: 000000000000001c RSI: 0000559354603090 RDI: 0000000000000003
[   68.760756] RBP: 00007f67fa91ff00 R08: 00007f67fa91fedc R09: 000000000000000c
[   68.760756] R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffe824d496e
[   68.760756] R13: 00007ffe824d496f R14: 00007f67fa120000 R15: 0000000000000003

[   68.760756]  </TASK>
[   68.760756]
[   68.760756] Allocated by task 279:
[   68.760756]  kasan_save_stack+0x1e/0x40
[   68.760756]  __kasan_kmalloc+0x81/0xa0
[   68.760756]  rfkill_alloc+0x7f/0x280
[   68.760756]  nfc_register_device+0xa3/0x1a0
[   68.760756]  nci_register_device+0x77a/0xad0
[   68.760756]  nfcmrvl_nci_register_dev+0x20b/0x2c0
[   68.760756]  nfcmrvl_nci_uart_open+0xf2/0x1dd
[   68.760756]  nci_uart_tty_ioctl+0x2c3/0x4a0
[   68.760756]  tty_ioctl+0x764/0x1310
[   68.760756]  __x64_sys_ioctl+0x122/0x190
[   68.760756]  do_syscall_64+0x3b/0x90
[   68.760756]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   68.760756]
[   68.760756] Freed by task 314:
[   68.760756]  kasan_save_stack+0x1e/0x40
[   68.760756]  kasan_set_track+0x21/0x30
[   68.760756]  kasan_set_free_info+0x20/0x30
[   68.760756]  __kasan_slab_free+0x108/0x170
[   68.760756]  kfree+0xb0/0x330
[   68.760756]  device_release+0x96/0x200
[   68.760756]  kobject_put+0xf9/0x1d0
[   68.760756]  nfc_unregister_device+0x77/0x190
[   68.760756]  nfcmrvl_nci_unregister_dev+0x88/0xd0
[   68.760756]  nci_uart_tty_close+0xdf/0x180
[   68.760756]  tty_ldisc_kill+0x73/0x110
[   68.760756]  tty_ldisc_hangup+0x281/0x5b0
[   68.760756]  __tty_hangup.part.0+0x431/0x890
[   68.760756]  tty_release+0x3a8/0xc80
[   68.760756]  __fput+0x1f0/0x8c0
[   68.760756]  task_work_run+0xc9/0x170
[   68.760756]  exit_to_user_mode_prepare+0x194/0x1a0
[   68.760756]  syscall_exit_to_user_mode+0x19/0x50
[   68.760756]  do_syscall_64+0x48/0x90
[   68.760756]  entry_SYSCALL_64_after_hwframe+0x44/0xae

This patch just add the null out of dev->rfkill to make sure such
dereference cannot happen. This is safe since the device_lock() already
protect the check/write from data race.

Fixes: 3e3b5dfc ("NFC: reorder the logic in nfc_{un,}register_device")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Address the following coccicheck warning:
net/ipv6/exthdrs.c:620:44-45: WARNING opportunity for swap()

by using swap() for the swapping of variable values and drop
the tmp (`addr`) variable that is not needed any more.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add boilerplate test loop in test to run all tests
in fib_rule_tests.sh
Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rely on standard cci-control-port property to identify CCI port
reference.
Update mt7622 dts binding.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
40GbE Intel Wired LAN Driver Updates 2022-04-12

This series contains updates to i40e and ice drivers.

Joe Damato adds TSO support for MPLS packets on i40e and ice drivers. He
also adds tracking and reporting of tx_stopped statistic for i40e.

Nabil S. Alramli adds reporting of tx_restart to ethtool for i40e.

Mateusz adds new device id support for i40e.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
tls: rx: random refactoring part 3

TLS Rx refactoring. Part 3 of 3. This set is mostly around rx_list
and async processing. The last two patches are minor optimizations.
A couple of features to follow.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

TLS 1.3 and ChaChaPoly don't carry IV in the packet.
The code before this change would copy out iv_size
worth of whatever followed the TLS header in the packet
and then for TLS 1.3 | ChaCha overwrite that with
the sequence number. Waste of cycles especially
with TLS 1.2 being close to dead and TLS 1.3 being
the common case.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

IVs are 8 or 16 bytes, no point reading out the exact value
for quantities this small.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>