- 08 Aug, 2018 11 commits
-
-
Connor McAdams authored
This patch adds exit functions for the Recon3D, and cleans up the current exit function. Signed-off-by:
Connor McAdams <conmanx360@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Connor McAdams authored
This patch adds changes to setup the Recon3D's mixer controls. Signed-off-by:
-
Connor McAdams authored
This patch adds commands to the alternative input and output select commands to support the Recon3D. Signed-off-by:
-
Connor McAdams authored
The Recon3D can use many of the same functions as the Recon3Di, so many of the r3di prefix function remain the same, but change their names to the more generic r3d prefix. This patch does this, and adds quirk checks for things specific to the Recon3Di. Signed-off-by:
-
Connor McAdams authored
This patch adds functions for Recon3D startup, and sets values for things such as use_pci_mmio. It also renames some functions and tables from the sbz prefix into ca0132, as the Recon3D uses them as well. Signed-off-by:
-
Connor McAdams authored
This patch adds the ability to choose whether or not to map the pci region2, which is used for things such as GPIO on the Recon3D and Sound Blaster Z. Signed-off-by:
-
Connor McAdams authored
This patch adds pin configs from the Recon3D, taken from the Window's driver. Signed-off-by:
-
Connor McAdams authored
This patch adds the PCI subsys ID for the Recon3D that has been tested, and adds the QUIRK_R3D enumeration. Signed-off-by:
-
Connor McAdams authored
This patch fixes a previous oversight where the microphone unsolicited response would use the wrong input selection function. Signed-off-by:
-
Connor McAdams authored
This patch cleans up ca0132_init by removing unnecessary commands and ordering things better. Signed-off-by:
-
Connor McAdams authored
This patch adds a new function, ca0132_mmio_gpio_set, to clear up what is going on with writes to mmio region 0x320. Signed-off-by:
-
- 06 Aug, 2018 4 commits
-
-
Colin Ian King authored
Variable cfg_val is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'cfg_val' set but not used [-Wunused-but-set-variable] [ Background info about val_bit field from alsa-devel ML thread: tiwai: Actually this made me wonder what is the definition of val_bit. It seems always 1 in the current code after the commit 964ca808. Pierre? pbossart: This val_bit is only there for debug/test, it should be set to one by default and has nothing to do with the lpcm_id. This variable was set even in patches before upstream submission and was never needed, I guess it must be a 9-yr old issue. Good catch! ] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115156 ("Missing break in switch") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comment with a proper "fall through" annotation, which is what GCC is expecting to find. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
- 05 Aug, 2018 1 commit
-
-
Alexandru Gagniuc authored
This device has the same issues as the HP x360 wrt the MUTE LED and the front speakers not working. This patch fixes the MUTE LED issue, but doesn't touch the HDA verbs. The fix for the x360 does not work on the Spectre. Signed-off-by:
Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by:
-
- 04 Aug, 2018 2 commits
-
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comment with a proper "fall through" annotation, which is what GCC is expecting to find. Signed-off-by:
-
- 03 Aug, 2018 11 commits
-
-
Takashi Iwai authored
For a sake of code simplification, remove the init and the exit entries that do nothing. Notes for readers: actually it's OK to remove *both* init and exit, but not OK to remove the exit entry. By removing only the exit while keeping init, the module becomes permanently loaded; i.e. you cannot unload it any longer! Signed-off-by: -
Takashi Iwai authored
For a sake of code simplification, remove the init and the exit entries that do nothing. Notes for readers: actually it's OK to remove *both* init and exit, but not OK to remove the exit entry. By removing only the exit while keeping init, the module becomes permanently loaded; i.e. you cannot unload it any longer! Signed-off-by: -
Takashi Iwai authored
For a sake of code simplification, remove the init and the exit entries that do nothing. Notes for readers: actually it's OK to remove *both* init and exit, but not OK to remove the exit entry. By removing only the exit while keeping init, the module becomes permanently loaded; i.e. you cannot unload it any longer! Signed-off-by: -
Takashi Iwai authored
For a sake of code simplification, remove the init and the exit entries that do nothing. Notes for readers: actually it's OK to remove *both* init and exit, but not OK to remove the exit entry. By removing only the exit while keeping init, the module becomes permanently loaded; i.e. you cannot unload it any longer! Signed-off-by: -
Takashi Iwai authored
For a sake of code simplification, remove the init and the exit entries that do nothing. Notes for readers: actually it's OK to remove *both* init and exit, but not OK to remove the exit entry. By removing only the exit while keeping init, the module becomes permanently loaded; i.e. you cannot unload it any longer! Signed-off-by: -
Takashi Iwai authored
For a sake of code simplification, remove the init and the exit entries that do nothing. Notes for readers: actually it's OK to remove *both* init and exit, but not OK to remove the exit entry. By removing only the exit while keeping init, the module becomes permanently loaded; i.e. you cannot unload it any longer! Signed-off-by: -
Colin Ian King authored
Trivial spelling mistake fix in debug message Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115075 ("Missing break in switch") Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 402016 ("Missing break in switch") Addresses-Coverity-ID: 1056542 ("Missing break in switch") Addresses-Coverity-ID: 1339579 ("Missing break in switch") Addresses-Coverity-ID: 1369526 ("Missing break in switch") Addresses-Coverity-ID: 1369529 ("Missing break in switch") Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1165394 ("Missing break in switch") Addresses-Coverity-ID: 1167851 ("Missing break in switch") Addresses-Coverity-ID: 402015 ("Missing break in switch") Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1468367 ("Missing break in switch") Addresses-Coverity-ID: 115037 ("Missing break in switch") Addresses-Coverity-ID: 115038 ("Missing break in switch") Signed-off-by:
-
- 02 Aug, 2018 2 commits
-
-
Takashi Iwai authored
There was a typo of COPY_USER in the dead code (that is disabled as default). Fixes: 4b83eff8 ("ALSA: sb: Convert to the new PCM ops") Signed-off-by:
-
Wei Yongjun authored
sizeof() when applied to a pointer typed expression gives the size of the pointer, not that of the pointed data. Fixes: 7edf3b5e ("ALSA: usb-audio: AudioStreaming Power Domain parsing") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
- 01 Aug, 2018 9 commits
-
-
Takashi Iwai authored
The old ugly macros remained in the code without usage. Rip them off. Signed-off-by: -
Takashi Iwai authored
All usages of mutex in ALSA sequencer core would take too long, hence we don't have to care about the user interruption that makes things complicated. Let's replace them with simpler mutex_lock(). Signed-off-by: -
Takashi Iwai authored
The sequencer core module doesn't call some destructors in the error path of the init code, which may leave some resources. This patch mainly fix these leaks by calling the destructors appropriately at alsa_seq_init(). Also the patch brings a few cleanups along with it, namely: - Expand the old "if ((err = xxx) < 0)" coding style - Get rid of empty seq_queue_init() and its caller - Change snd_seq_info_done() to void Last but not least, a couple of functions lose __exit annotation since they are called also in alsa_seq_init(). No functional changes but minor code cleanups. Signed-off-by: -
Takashi Iwai authored
There are a few functions that have been commented out for ages. And also there are functions that do nothing but placeholders. Let's kill them. Signed-off-by: -
Takashi Iwai authored
snd_midi_event_encode_byte() can never fail, and it can return rather true/false. Change the return type to bool, adjust the argument to receive a MIDI byte as unsigned char, and adjust the comment accordingly. This allows callers to drop error checks, which simplifies the code. Meanwhile, snd_midi_event_encode() helper is used only in seq_midi.c, and it can be better folded into it. This will reduce the total amount of lines in the end. Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115084 ("Missing break in switch") Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1357375 ("Missing break in switch") Signed-off-by: -
Colin Ian King authored
Pointer 'urb' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'urb' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Pointer 'dir' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'dir' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
