- 22 May, 2019 40 commits
-
-
Sean Christopherson authored
commit f93f7ede upstream. The RDPMC-exiting control is dependent on the existence of the RDPMC instruction itself, i.e. is not tied to the "Architectural Performance Monitoring" feature. For all intents and purposes, the control exists on all CPUs with VMX support since RDPMC also exists on all VCPUs with VMX supported. Per Intel's SDM: The RDPMC instruction was introduced into the IA-32 Architecture in the Pentium Pro processor and the Pentium processor with MMX technology. The earlier Pentium processors have performance-monitoring counters, but they must be read with the RDMSR instruction. Because RDPMC-exiting always exists, KVM requires the control and refuses to load if it's not available. As a result, hiding the PMU from a guest breaks nested virtualization if the guest attemts to use KVM. While it's not explicitly stated in the RDPMC pseudocode, the VM-Exit check for RDPMC-exiting follows standard fault vs. VM-Exit prioritization for privileged instructions, e.g. occurs after the CPL/CR0.PE/CR4.PCE checks, but before the counter referenced in ECX is checked for validity. In other words, the original KVM behavior of injecting a #GP was correct, and the KVM unit test needs to be adjusted accordingly, e.g. eat the #GP when the unit test guest (L3 in this case) executes RDPMC without RDPMC-exiting set in the unit test host (L2). This reverts commit e51bfdb6. Fixes: e51bfdb6 ("KVM: nVMX: Expose RDPMC-exiting only when guest supports PMU") Reported-by: David Hill <hilld@binarystorm.net> Cc: Saar Amar <saaramar@microsoft.com> Cc: Mihai Carabas <mihai.carabas@oracle.com> Cc: Jim Mattson <jmattson@google.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chengguang Xu authored
commit 0d52154b upstream. When failing from creating cache jbd2_inode_cache, we will destroy the previously created cache jbd2_handle_cache twice. This patch fixes this by moving each cache initialization/destruction to its own separate, individual function. Signed-off-by: Chengguang Xu <cgxu519@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michał Wadowski authored
commit 56df90b6 upstream. Add patch for realtek codec in Lenovo B50-70 that fixes inverted internal microphone channel. Device IdeaPad Y410P has the same PCI SSID as Lenovo B50-70, but first one is about fix the noise and it didn't seem help in a later kernel version. So I replaced IdeaPad Y410P device description with B50-70 and apply inverted microphone fix. Bugzilla: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1524215Signed-off-by: Michał Wadowski <wadosm@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kailang Yang authored
commit dad3197d upstream. Dell platform with ALC298. system enter to runtime suspend. Headphone had noise. Let Headset Mic not shutup will solve this issue. [ Fixed minor coding style issues by tiwai ] Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeremy Soller authored
commit 891afcf2 upstream. A mistake was made in the identification of the four variants of the System76 Gazelle (gaze14). This patch corrects the PCI ID of the 17-inch, GTX 1660 Ti variant from 0x8560 to 0x8551. This patch also adds the correct fixups for the 15-inch and 17-inch GTX 1650 variants with PCI IDs 0x8560 and 0x8561. Tests were done on all four variants ensuring full audio capability. Fixes: 80a5052d ("ALSA: hdea/realtek - Headset fixup for System76 Gazelle (gaze14)") Signed-off-by: Jeremy Soller <jeremy@system76.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit 2c1d0e36 upstream. Handling of aborted journal is a special code path different from standard ext4_error() one and it can call panic() as well. Commit 1dc1097f ("ext4: avoid panic during forced reboot") forgot to update this path so fix that omission. Fixes: 1dc1097f ("ext4: avoid panic during forced reboot") Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 5.1 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sahitya Tummala authored
commit 08fc98a4 upstream. The buffer_head (frames[0].bh) and it's corresping page can be potentially free'd once brelse() is done inside the for loop but before the for loop exits in dx_release(). It can be free'd in another context, when the page cache is flushed via drop_caches_sysctl_handler(). This results into below data abort when accessing info->indirect_levels in dx_release(). Unable to handle kernel paging request at virtual address ffffffc17ac3e01e Call trace: dx_release+0x70/0x90 ext4_htree_fill_tree+0x2d4/0x300 ext4_readdir+0x244/0x6f8 iterate_dir+0xbc/0x160 SyS_getdents64+0x94/0x174 Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lukas Czerner authored
commit 57a0da28 upstream. Unaligned AIO must be serialized because the zeroing of partial blocks of unaligned AIO can result in data corruption in case it's overlapping another in flight IO. Currently we wait for all unwritten extents before we submit unaligned AIO which protects data in case of unaligned AIO is following overlapping IO. However if a unaligned AIO is followed by overlapping aligned AIO we can still end up corrupting data. To fix this, we must make sure that the unaligned AIO is the only IO in flight by waiting for unwritten extents conversion not just before the IO submission, but right after it as well. This problem can be reproduced by xfstest generic/538 Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sriram Rajagopalan authored
commit 592acbf1 upstream. This commit zeroes out the unused memory region in the buffer_head corresponding to the extent metablock after writing the extent header and the corresponding extent node entries. This is done to prevent random uninitialized data from getting into the filesystem when the extent block is synced. This fixes CVE-2019-11833. Signed-off-by: Sriram Rajagopalan <sriramr@arista.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anup Patel authored
commit f91253a3 upstream. The Linux kernel will auto-disables all boot consoles whenever it gets a preferred real console. Currently on RISC-V systems, if we have a real console which is not RISCV SBI console then boot consoles (such as earlycon=sbi) are not auto-disabled when a real console (ttyS0 or ttySIF0) is available. This results in duplicate prints at boot-time after kernel starts using real console (i.e. ttyS0 or ttySIF0) if "earlycon=" kernel parameter was passed by bootloader. The reason for above issue is that RISCV SBI console always adds itself as preferred console which is causing other real consoles to be not used as preferred console. Ideally "console=" kernel parameter passed by bootloaders should be the one selecting a preferred real console. This patch fixes above issue by not forcing RISCV SBI console as preferred console. Fixes: afa6b1cc ("tty: New RISC-V SBI console driver") Cc: stable@vger.kernel.org Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiufei Xue authored
commit ec084de9 upstream. synchronize_rcu() didn't wait for call_rcu() callbacks, so inode wb switch may not go to the workqueue after synchronize_rcu(). Thus previous scheduled switches was not finished even flushing the workqueue, which will cause a NULL pointer dereferenced followed below. VFS: Busy inodes after unmount of vdd. Self-destruct in 5 seconds. Have a nice day... BUG: unable to handle kernel NULL pointer dereference at 0000000000000278 evict+0xb3/0x180 iput+0x1b0/0x230 inode_switch_wbs_work_fn+0x3c0/0x6a0 worker_thread+0x4e/0x490 ? process_one_work+0x410/0x410 kthread+0xe6/0x100 ret_from_fork+0x39/0x50 Replace the synchronize_rcu() call with a rcu_barrier() to wait for all pending callbacks to finish. And inc isw_nr_in_flight after call_rcu() in inode_switch_wbs() to make more sense. Link: http://lkml.kernel.org/r/20190429024108.54150-1-jiufei.xue@linux.alibaba.comSigned-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Suggested-by: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mel Gorman authored
commit 60fce36a upstream. syzbot reported the following error from a tree with a head commit of baf76f0c ("slip: make slhc_free() silently accept an error pointer") BUG: unable to handle kernel paging request at ffffea0003348000 #PF error: [normal kernel read fault] PGD 12c3f9067 P4D 12c3f9067 PUD 12c3f8067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 28916 Comm: syz-executor.2 Not tainted 5.1.0-rc6+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:constant_test_bit arch/x86/include/asm/bitops.h:314 [inline] RIP: 0010:PageCompound include/linux/page-flags.h:186 [inline] RIP: 0010:isolate_freepages_block+0x1c0/0xd40 mm/compaction.c:579 Code: 01 d8 ff 4d 85 ed 0f 84 ef 07 00 00 e8 29 00 d8 ff 4c 89 e0 83 85 38 ff ff ff 01 48 c1 e8 03 42 80 3c 38 00 0f 85 31 0a 00 00 <4d> 8b 2c 24 31 ff 49 c1 ed 10 41 83 e5 01 44 89 ee e8 3a 01 d8 ff RSP: 0018:ffff88802b31eab8 EFLAGS: 00010246 RAX: 1ffffd4000669000 RBX: 00000000000cd200 RCX: ffffc9000a235000 RDX: 000000000001ca5e RSI: ffffffff81988cc7 RDI: 0000000000000001 RBP: ffff88802b31ebd8 R08: ffff88805af700c0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffea0003348000 R13: 0000000000000000 R14: ffff88802b31f030 R15: dffffc0000000000 FS: 00007f61648dc700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffea0003348000 CR3: 0000000037c64000 CR4: 00000000001426e0 Call Trace: fast_isolate_around mm/compaction.c:1243 [inline] fast_isolate_freepages mm/compaction.c:1418 [inline] isolate_freepages mm/compaction.c:1438 [inline] compaction_alloc+0x1aee/0x22e0 mm/compaction.c:1550 There is no reproducer and it is difficult to hit -- 1 crash every few days. The issue is very similar to the fix in commit 6b0868c8 ("mm/compaction.c: correct zone boundary handling when resetting pageblock skip hints"). When isolating free pages around a target pageblock, the boundary handling is off by one and can stray into the next pageblock. Triggering the syzbot error requires that the end of pageblock is section or zone aligned, and that the next section is unpopulated. A more subtle consequence of the bug is that pageblocks were being improperly used as migration targets which potentially hurts fragmentation avoidance in the long-term one page at a time. A debugging patch revealed that it's definitely possible to stray outside of a pageblock which is not intended. While syzbot cannot be used to verify this patch, it was confirmed that the debugging warning no longer triggers with this patch applied. It has also been confirmed that the THP allocation stress tests are not degraded by this patch. Link: http://lkml.kernel.org/r/20190510182124.GI18914@techsingularity.net Fixes: e332f741 ("mm, compaction: be selective about what pageblocks to clear skip hints") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reported-by: syzbot+d84c80f9fe26a0f7a734@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Qian Cai <cai@lca.pw> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabio Estevam authored
commit 0672d22a upstream. Commit 6d4cd041 ("net: phy: at803x: disable delay only for RGMII mode") exposed an issue on imx DTS files using AR8031/AR8035 PHYs. The end result is that the boards can no longer obtain an IP address via UDHCP, for example. Quoting Andrew Lunn: "The problem here is, all the DTs were broken since day 0. However, because the PHY driver was also broken, nobody noticed and it worked. Now that the PHY driver has been fixed, all the bugs in the DTs now become an issue" To fix this problem, the phy-mode property needs to be "rgmii-id", which has the following meaning as per Documentation/devicetree/bindings/net/ethernet.txt: "RGMII with internal RX and TX delays provided by the PHY, the MAC should not add the RX or TX delays in this case)" Tested on imx6-sabresd, imx6sx-sdb and imx7d-pico boards with successfully restored networking. Based on the initial submission from Steve Twiss for the imx6qdl-sabresd. Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Baruch Siach <baruch@tkos.co.il> Tested-by: Soeren Moch <smoch@web.de> Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Adam Thomson <Adam.Thomson@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Cc: "George G. Davis" <george_davis@mentor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kamlakant Patel authored
commit 55be8658 upstream. According to ipmi spec, block number is a number that is incremented, starting with 0, for each new block of message data returned using the middle transaction. Here, the 'blocknum' is data[0] which always starts from zero(0) and 'ssif_info->multi_pos' starts from 1. So, we need to add +1 to blocknum while comparing with multi_pos. Fixes: 7d6380cd ("ipmi:ssif: Fix handling of multi-part return messages"). Reported-by: Kiran Kolukuluru <kirank@ami.com> Signed-off-by: Kamlakant Patel <kamlakantp@marvell.com> Message-Id: <1556106615-18722-1-git-send-email-kamlakantp@marvell.com> [Also added a debug log if the block numbers don't match.] Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org # 4.4 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Corey Minyard authored
commit d7323638 upstream. This is required for SSIF to work. There was no way to know if the interface being added was SI or SSIF from the platform data, but that was required so the i2c-addr is only added for SSIF interfaces. So add a field for that. Also rework the logic a bit so that ipmi-type is not set for SSIF interfaces, as it is not necessary for that. Fixes: 3cd83bac ("ipmi: Consolidate the adding of platform devices") Reported-by: Kamlakant Patel <kamlakantp@marvell.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org # 5.1 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Coly Li authored
commit 1bee2add upstream. In journal_reclaim() ja->cur_idx of each cache will be update to reclaim available journal buckets. Variable 'int n' is used to count how many cache is successfully reclaimed, then n is set to c->journal.key by SET_KEY_PTRS(). Later in journal_write_unlocked(), a for_each_cache() loop will write the jset data onto each cache. The problem is, if all jouranl buckets on each cache is full, the following code in journal_reclaim(), 529 for_each_cache(ca, c, iter) { 530 struct journal_device *ja = &ca->journal; 531 unsigned int next = (ja->cur_idx + 1) % ca->sb.njournal_buckets; 532 533 /* No space available on this device */ 534 if (next == ja->discard_idx) 535 continue; 536 537 ja->cur_idx = next; 538 k->ptr[n++] = MAKE_PTR(0, 539 bucket_to_sector(c, ca->sb.d[ja->cur_idx]), 540 ca->sb.nr_this_dev); 541 } 542 543 bkey_init(k); 544 SET_KEY_PTRS(k, n); If there is no available bucket to reclaim, the if() condition at line 534 will always true, and n remains 0. Then at line 544, SET_KEY_PTRS() will set KEY_PTRS field of c->journal.key to 0. Setting KEY_PTRS field of c->journal.key to 0 is wrong. Because in journal_write_unlocked() the journal data is written in following loop, 649 for (i = 0; i < KEY_PTRS(k); i++) { 650-671 submit journal data to cache device 672 } If KEY_PTRS field is set to 0 in jouranl_reclaim(), the journal data won't be written to cache device here. If system crahed or rebooted before bkeys of the lost journal entries written into btree nodes, data corruption will be reported during bcache reload after rebooting the system. Indeed there is only one cache in a cache set, there is no need to set KEY_PTRS field in journal_reclaim() at all. But in order to keep the for_each_cache() logic consistent for now, this patch fixes the above problem by not setting 0 KEY_PTRS of journal key, if there is no bucket available to reclaim. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Liang Chen authored
commit a4b732a2 upstream. There is a race between cache device register and cache set unregister. For an already registered cache device, register_bcache will call bch_is_open to iterate through all cachesets and check every cache there. The race occurs if cache_set_free executes at the same time and clears the caches right before ca is dereferenced in bch_is_open_cache. To close the race, let's make sure the clean up work is protected by the bch_register_lock as well. This issue can be reproduced as follows, while true; do echo /dev/XXX> /sys/fs/bcache/register ; done& while true; do echo 1> /sys/block/XXX/bcache/set/unregister ; done & and results in the following oops, [ +0.000053] BUG: unable to handle kernel NULL pointer dereference at 0000000000000998 [ +0.000457] #PF error: [normal kernel read fault] [ +0.000464] PGD 800000003ca9d067 P4D 800000003ca9d067 PUD 3ca9c067 PMD 0 [ +0.000388] Oops: 0000 [#1] SMP PTI [ +0.000269] CPU: 1 PID: 3266 Comm: bash Not tainted 5.0.0+ #6 [ +0.000346] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.fc28 04/01/2014 [ +0.000472] RIP: 0010:register_bcache+0x1829/0x1990 [bcache] [ +0.000344] Code: b0 48 83 e8 50 48 81 fa e0 e1 10 c0 0f 84 a9 00 00 00 48 89 c6 48 89 ca 0f b7 ba 54 04 00 00 4c 8b 82 60 0c 00 00 85 ff 74 2f <49> 3b a8 98 09 00 00 74 4e 44 8d 47 ff 31 ff 49 c1 e0 03 eb 0d [ +0.000839] RSP: 0018:ffff92ee804cbd88 EFLAGS: 00010202 [ +0.000328] RAX: ffffffffc010e190 RBX: ffff918b5c6b5000 RCX: ffff918b7d8e0000 [ +0.000399] RDX: ffff918b7d8e0000 RSI: ffffffffc010e190 RDI: 0000000000000001 [ +0.000398] RBP: ffff918b7d318340 R08: 0000000000000000 R09: ffffffffb9bd2d7a [ +0.000385] R10: ffff918b7eb253c0 R11: ffffb95980f51200 R12: ffffffffc010e1a0 [ +0.000411] R13: fffffffffffffff2 R14: 000000000000000b R15: ffff918b7e232620 [ +0.000384] FS: 00007f955bec2740(0000) GS:ffff918b7eb00000(0000) knlGS:0000000000000000 [ +0.000420] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000801] CR2: 0000000000000998 CR3: 000000003cad6000 CR4: 00000000001406e0 [ +0.000837] Call Trace: [ +0.000682] ? _cond_resched+0x10/0x20 [ +0.000691] ? __kmalloc+0x131/0x1b0 [ +0.000710] kernfs_fop_write+0xfa/0x170 [ +0.000733] __vfs_write+0x2e/0x190 [ +0.000688] ? inode_security+0x10/0x30 [ +0.000698] ? selinux_file_permission+0xd2/0x120 [ +0.000752] ? security_file_permission+0x2b/0x100 [ +0.000753] vfs_write+0xa8/0x1a0 [ +0.000676] ksys_write+0x4d/0xb0 [ +0.000699] do_syscall_64+0x3a/0xf0 [ +0.000692] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Liang Chen <liangchen.linux@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Filipe Manana authored
commit 62d54f3a upstream. Send operates on read only trees and expects them to never change while it is using them. This is part of its initial design, and this expection is due to two different reasons: 1) When it was introduced, no operations were allowed to modifiy read-only subvolumes/snapshots (including defrag for example). 2) It keeps send from having an impact on other filesystem operations. Namely send does not need to keep locks on the trees nor needs to hold on to transaction handles and delay transaction commits. This ends up being a consequence of the former reason. However the deduplication feature was introduced later (on September 2013, while send was introduced in July 2012) and it allowed for deduplication with destination files that belong to read-only trees (subvolumes and snapshots). That means that having a send operation (either full or incremental) running in parallel with a deduplication that has the destination inode in one of the trees used by the send operation, can result in tree nodes and leaves getting freed and reused while send is using them. This problem is similar to the problem solved for the root nodes getting freed and reused when a snapshot is made against one tree that is currenly being used by a send operation, fixed in commits [1] and [2]. These commits explain in detail how the problem happens and the explanation is valid for any node or leaf that is not the root of a tree as well. This problem was also discussed and explained recently in a thread [3]. The problem is very easy to reproduce when using send with large trees (snapshots) and just a few concurrent deduplication operations that target files in the trees used by send. A stress test case is being sent for fstests that triggers the issue easily. The most common error to hit is the send ioctl return -EIO with the following messages in dmesg/syslog: [1631617.204075] BTRFS error (device sdc): did not find backref in send_root. inode=63292, offset=0, disk_byte=5228134400 found extent=5228134400 [1631633.251754] BTRFS error (device sdc): parent transid verify failed on 32243712 wanted 24 found 27 The first one is very easy to hit while the second one happens much less frequently, except for very large trees (in that test case, snapshots with 100000 files having large xattrs to get deep and wide trees). Less frequently, at least one BUG_ON can be hit: [1631742.130080] ------------[ cut here ]------------ [1631742.130625] kernel BUG at fs/btrfs/ctree.c:1806! [1631742.131188] invalid opcode: 0000 [#6] SMP DEBUG_PAGEALLOC PTI [1631742.131726] CPU: 1 PID: 13394 Comm: btrfs Tainted: G B D W 5.0.0-rc8-btrfs-next-45 #1 [1631742.132265] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [1631742.133399] RIP: 0010:read_node_slot+0x122/0x130 [btrfs] (...) [1631742.135061] RSP: 0018:ffffb530021ebaa0 EFLAGS: 00010246 [1631742.135615] RAX: ffff93ac8912e000 RBX: 000000000000009d RCX: 0000000000000002 [1631742.136173] RDX: 000000000000009d RSI: ffff93ac564b0d08 RDI: ffff93ad5b48c000 [1631742.136759] RBP: ffffb530021ebb7d R08: 0000000000000001 R09: ffffb530021ebb7d [1631742.137324] R10: ffffb530021eba70 R11: 0000000000000000 R12: ffff93ac87d0a708 [1631742.137900] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001 [1631742.138455] FS: 00007f4cdb1528c0(0000) GS:ffff93ad76a80000(0000) knlGS:0000000000000000 [1631742.139010] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1631742.139568] CR2: 00007f5acb3d0420 CR3: 000000012be3e006 CR4: 00000000003606e0 [1631742.140131] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1631742.140719] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1631742.141272] Call Trace: [1631742.141826] ? do_raw_spin_unlock+0x49/0xc0 [1631742.142390] tree_advance+0x173/0x1d0 [btrfs] [1631742.142948] btrfs_compare_trees+0x268/0x690 [btrfs] [1631742.143533] ? process_extent+0x1070/0x1070 [btrfs] [1631742.144088] btrfs_ioctl_send+0x1037/0x1270 [btrfs] [1631742.144645] _btrfs_ioctl_send+0x80/0x110 [btrfs] [1631742.145161] ? trace_sched_stick_numa+0xe0/0xe0 [1631742.145685] btrfs_ioctl+0x13fe/0x3120 [btrfs] [1631742.146179] ? account_entity_enqueue+0xd3/0x100 [1631742.146662] ? reweight_entity+0x154/0x1a0 [1631742.147135] ? update_curr+0x20/0x2a0 [1631742.147593] ? check_preempt_wakeup+0x103/0x250 [1631742.148053] ? do_vfs_ioctl+0xa2/0x6f0 [1631742.148510] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [1631742.148942] do_vfs_ioctl+0xa2/0x6f0 [1631742.149361] ? __fget+0x113/0x200 [1631742.149767] ksys_ioctl+0x70/0x80 [1631742.150159] __x64_sys_ioctl+0x16/0x20 [1631742.150543] do_syscall_64+0x60/0x1b0 [1631742.150931] entry_SYSCALL_64_after_hwframe+0x49/0xbe [1631742.151326] RIP: 0033:0x7f4cd9f5add7 (...) [1631742.152509] RSP: 002b:00007ffe91017708 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [1631742.152892] RAX: ffffffffffffffda RBX: 0000000000000105 RCX: 00007f4cd9f5add7 [1631742.153268] RDX: 00007ffe91017790 RSI: 0000000040489426 RDI: 0000000000000007 [1631742.153633] RBP: 0000000000000007 R08: 00007f4cd9e79700 R09: 00007f4cd9e79700 [1631742.153999] R10: 00007f4cd9e799d0 R11: 0000000000000202 R12: 0000000000000003 [1631742.154365] R13: 0000555dfae53020 R14: 0000000000000000 R15: 0000000000000001 (...) [1631742.156696] ---[ end trace 5dac9f96dcc3fd6b ]--- That BUG_ON happens because while send is using a node, that node is COWed by a concurrent deduplication, gets freed and gets reused as a leaf (because a transaction commit happened in between), so when it attempts to read a slot from the extent buffer, at ctree.c:read_node_slot(), the extent buffer contents were wiped out and it now matches a leaf (which can even belong to some other tree now), hitting the BUG_ON(level == 0). Fix this concurrency issue by not allowing send and deduplication to run in parallel if both operate on the same readonly trees, returning EAGAIN to user space and logging an exlicit warning in dmesg/syslog. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=be6821f82c3cc36e026f5afd10249988852b35ea [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6f2f0b394b54e2b159ef969a0b5274e9bbf82ff2 [3] https://lore.kernel.org/linux-btrfs/CAL3q7H7iqSEEyFaEtpRZw3cp613y+4k2Q8b4W7mweR3tZA05bQ@mail.gmail.com/ CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Filipe Manana authored
commit bfc61c36 upstream. When finding out which inodes have references on a particular extent, done by backref.c:iterate_extent_inodes(), from the BTRFS_IOC_LOGICAL_INO (both v1 and v2) ioctl and from scrub we use the transaction join API to grab a reference on the currently running transaction, since in order to give accurate results we need to inspect the delayed references of the currently running transaction. However, if there is currently no running transaction, the join operation will create a new transaction. This is inefficient as the transaction will eventually be committed, doing unnecessary IO and introducing a potential point of failure that will lead to a transaction abort due to -ENOSPC, as recently reported [1]. That's because the join, creates the transaction but does not reserve any space, so when attempting to update the root item of the root passed to btrfs_join_transaction(), during the transaction commit, we can end up failling with -ENOSPC. Users of a join operation are supposed to actually do some filesystem changes and reserve space by some means, which is not the case of iterate_extent_inodes(), it is a read-only operation for all contextes from which it is called. The reported [1] -ENOSPC failure stack trace is the following: heisenberg kernel: ------------[ cut here ]------------ heisenberg kernel: BTRFS: Transaction aborted (error -28) heisenberg kernel: WARNING: CPU: 0 PID: 7137 at fs/btrfs/root-tree.c:136 btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: CPU: 0 PID: 7137 Comm: btrfs-transacti Not tainted 4.19.0-4-amd64 #1 Debian 4.19.28-2 heisenberg kernel: Hardware name: FUJITSU LIFEBOOK U757/FJNB2A5, BIOS Version 1.21 03/19/2018 heisenberg kernel: RIP: 0010:btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: RSP: 0018:ffffb5448828bd40 EFLAGS: 00010286 heisenberg kernel: RAX: 0000000000000000 RBX: ffff8ed56bccef50 RCX: 0000000000000006 heisenberg kernel: RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8ed6bda166a0 heisenberg kernel: RBP: 00000000ffffffe4 R08: 00000000000003df R09: 0000000000000007 heisenberg kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ed63396a078 heisenberg kernel: R13: ffff8ed092d7c800 R14: ffff8ed64f5db028 R15: ffff8ed6bd03d068 heisenberg kernel: FS: 0000000000000000(0000) GS:ffff8ed6bda00000(0000) knlGS:0000000000000000 heisenberg kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 heisenberg kernel: CR2: 00007f46f75f8000 CR3: 0000000310a0a002 CR4: 00000000003606f0 heisenberg kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 heisenberg kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 heisenberg kernel: Call Trace: heisenberg kernel: commit_fs_roots+0x166/0x1d0 [btrfs] heisenberg kernel: ? _cond_resched+0x15/0x30 heisenberg kernel: ? btrfs_run_delayed_refs+0xac/0x180 [btrfs] heisenberg kernel: btrfs_commit_transaction+0x2bd/0x870 [btrfs] heisenberg kernel: ? start_transaction+0x9d/0x3f0 [btrfs] heisenberg kernel: transaction_kthread+0x147/0x180 [btrfs] heisenberg kernel: ? btrfs_cleanup_transaction+0x530/0x530 [btrfs] heisenberg kernel: kthread+0x112/0x130 heisenberg kernel: ? kthread_bind+0x30/0x30 heisenberg kernel: ret_from_fork+0x35/0x40 heisenberg kernel: ---[ end trace 05de912e30e012d9 ]--- So fix that by using the attach API, which does not create a transaction when there is currently no running transaction. [1] https://lore.kernel.org/linux-btrfs/b2a668d7124f1d3e410367f587926f622b3f03a4.camel@scientia.net/Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Filipe Manana authored
commit 03628cdb upstream. During fiemap, for regular extents (non inline) we need to check if they are shared and if they are, set the shared bit. Checking if an extent is shared requires checking the delayed references of the currently running transaction, since some reference might have not yet hit the extent tree and be only in the in-memory delayed references. However we were using a transaction join for this, which creates a new transaction when there is no transaction currently running. That means that two more potential failures can happen: creating the transaction and committing it. Further, if no write activity is currently happening in the system, and fiemap calls keep being done, we end up creating and committing transactions that do nothing. In some extreme cases this can result in the commit of the transaction created by fiemap to fail with ENOSPC when updating the root item of a subvolume tree because a join does not reserve any space, leading to a trace like the following: heisenberg kernel: ------------[ cut here ]------------ heisenberg kernel: BTRFS: Transaction aborted (error -28) heisenberg kernel: WARNING: CPU: 0 PID: 7137 at fs/btrfs/root-tree.c:136 btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: CPU: 0 PID: 7137 Comm: btrfs-transacti Not tainted 4.19.0-4-amd64 #1 Debian 4.19.28-2 heisenberg kernel: Hardware name: FUJITSU LIFEBOOK U757/FJNB2A5, BIOS Version 1.21 03/19/2018 heisenberg kernel: RIP: 0010:btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: RSP: 0018:ffffb5448828bd40 EFLAGS: 00010286 heisenberg kernel: RAX: 0000000000000000 RBX: ffff8ed56bccef50 RCX: 0000000000000006 heisenberg kernel: RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8ed6bda166a0 heisenberg kernel: RBP: 00000000ffffffe4 R08: 00000000000003df R09: 0000000000000007 heisenberg kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ed63396a078 heisenberg kernel: R13: ffff8ed092d7c800 R14: ffff8ed64f5db028 R15: ffff8ed6bd03d068 heisenberg kernel: FS: 0000000000000000(0000) GS:ffff8ed6bda00000(0000) knlGS:0000000000000000 heisenberg kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 heisenberg kernel: CR2: 00007f46f75f8000 CR3: 0000000310a0a002 CR4: 00000000003606f0 heisenberg kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 heisenberg kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 heisenberg kernel: Call Trace: heisenberg kernel: commit_fs_roots+0x166/0x1d0 [btrfs] heisenberg kernel: ? _cond_resched+0x15/0x30 heisenberg kernel: ? btrfs_run_delayed_refs+0xac/0x180 [btrfs] heisenberg kernel: btrfs_commit_transaction+0x2bd/0x870 [btrfs] heisenberg kernel: ? start_transaction+0x9d/0x3f0 [btrfs] heisenberg kernel: transaction_kthread+0x147/0x180 [btrfs] heisenberg kernel: ? btrfs_cleanup_transaction+0x530/0x530 [btrfs] heisenberg kernel: kthread+0x112/0x130 heisenberg kernel: ? kthread_bind+0x30/0x30 heisenberg kernel: ret_from_fork+0x35/0x40 heisenberg kernel: ---[ end trace 05de912e30e012d9 ]--- Since fiemap (and btrfs_check_shared()) is a read-only operation, do not do a transaction join to avoid the overhead of creating a new transaction (if there is currently no running transaction) and introducing a potential point of failure when the new transaction gets committed, instead use a transaction attach to grab a handle for the currently running transaction if any. Reported-by: Christoph Anton Mitterer <calestyo@scientia.net> Link: https://lore.kernel.org/linux-btrfs/b2a668d7124f1d3e410367f587926f622b3f03a4.camel@scientia.net/ Fixes: afce772e ("btrfs: fix check_shared for fiemap ioctl") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Filipe Manana authored
commit 9f89d5de upstream. When we set a subvolume to read-only mode we do not flush dellaloc for any of its inodes (except if the filesystem is mounted with -o flushoncommit), since it does not affect correctness for any subsequent operations - except for a future send operation. The send operation will not be able to see the delalloc data since the respective file extent items, inode item updates, backreferences, etc, have not hit yet the subvolume and extent trees. Effectively this means data loss, since the send stream will not contain any data from existing delalloc. Another problem from this is that if the writeback starts and finishes while the send operation is in progress, we have the subvolume tree being being modified concurrently which can result in send failing unexpectedly with EIO or hitting runtime errors, assertion failures or hitting BUG_ONs, etc. Simple reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ btrfs subvolume create /mnt/sv $ xfs_io -f -c "pwrite -S 0xea 0 108K" /mnt/sv/foo $ btrfs property set /mnt/sv ro true $ btrfs send -f /tmp/send.stream /mnt/sv $ od -t x1 -A d /mnt/sv/foo 0000000 ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea * 0110592 $ umount /mnt $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt $ btrfs receive -f /tmp/send.stream /mnt $ echo $? 0 $ od -t x1 -A d /mnt/sv/foo 0000000 # ---> empty file Since this a problem that affects send only, fix it in send by flushing dellaloc for all the roots used by the send operation before send starts to process the commit roots. This is a problem that affects send since it was introduced (commit 31db9f7c ("Btrfs: introduce BTRFS_IOC_SEND for btrfs send/receive")) but backporting it to older kernels has some dependencies: - For kernels between 3.19 and 4.20, it depends on commit 3cd24c69 ("btrfs: use tagged writepage to mitigate livelock of snapshot") because the function btrfs_start_delalloc_snapshot() does not exist before that commit. So one has to either pick that commit or replace the calls to btrfs_start_delalloc_snapshot() in this patch with calls to btrfs_start_delalloc_inodes(). - For kernels older than 3.19 it also requires commit e5fa8f86 ("Btrfs: ensure send always works on roots without orphans") because it depends on the function ensure_commit_roots_uptodate() which that commits introduced. - No dependencies for 5.0+ kernels. A test case for fstests follows soon. CC: stable@vger.kernel.org # 3.19+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nikolay Borisov authored
commit c2d1b3aa upstream. Up until now trimming the freespace was done irrespective of what the arguments of the FITRIM ioctl were. For example fstrim's -o/-l arguments will be entirely ignored. Fix it by correctly handling those paramter. This requires breaking if the found freespace extent is after the end of the passed range as well as completing trim after trimming fstrim_range::len bytes. Fixes: 499f377f ("btrfs: iterate over unused chunk space in FITRIM") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nikolay Borisov authored
commit 537f38f0 upstream. If a an eb fails to be read for whatever reason - it's corrupted on disk and parent transid/key validations fail or IO for eb pages fail then this buffer must be removed from the buffer cache. Currently the code calls free_extent_buffer if an error occurs. Unfortunately this doesn't achieve the desired behavior since btrfs_find_create_tree_block returns with eb->refs == 2. On the other hand free_extent_buffer will only decrement the refs once leaving it added to the buffer cache radix tree. This enables later code to look up the buffer from the cache and utilize it potentially leading to a crash. The correct way to free the buffer is call free_extent_buffer_stale. This function will correctly call atomic_dec explicitly for the buffer and subsequently call release_extent_buffer which will decrement the final reference thus correctly remove the invalid buffer from buffer cache. This change affects only newly allocated buffers since they have eb->refs == 2. Link: https://bugzilla.kernel.org/show_bug.cgi?id=202755Reported-by: Jungyeon <jungyeon@gatech.edu> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Qu Wenruo authored
commit 448de471 upstream. [BUG] When reading a file from a fuzzed image, kernel can panic like: BTRFS warning (device loop0): csum failed root 5 ino 270 off 0 csum 0x98f94189 expected csum 0x00000000 mirror 1 assertion failed: !memcmp_extent_buffer(b, &disk_key, offsetof(struct btrfs_leaf, items[0].key), sizeof(disk_key)), file: fs/btrfs/ctree.c, line: 2544 ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.h:3500! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:btrfs_search_slot.cold.24+0x61/0x63 [btrfs] Call Trace: btrfs_lookup_csum+0x52/0x150 [btrfs] __btrfs_lookup_bio_sums+0x209/0x640 [btrfs] btrfs_submit_bio_hook+0x103/0x170 [btrfs] submit_one_bio+0x59/0x80 [btrfs] extent_read_full_page+0x58/0x80 [btrfs] generic_file_read_iter+0x2f6/0x9d0 __vfs_read+0x14d/0x1a0 vfs_read+0x8d/0x140 ksys_read+0x52/0xc0 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe [CAUSE] The fuzzed image has a corrupted leaf whose first key doesn't match its parent: checksum tree key (CSUM_TREE ROOT_ITEM 0) node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE fs uuid 3381d111-94a3-4ac7-8f39-611bbbdab7e6 chunk uuid 9af1c3c7-2af5-488b-8553-530bd515f14c ... key (EXTENT_CSUM EXTENT_CSUM 79691776) block 29761536 gen 19 leaf 29761536 items 1 free space 1726 generation 19 owner CSUM_TREE leaf 29761536 flags 0x1(WRITTEN) backref revision 1 fs uuid 3381d111-94a3-4ac7-8f39-611bbbdab7e6 chunk uuid 9af1c3c7-2af5-488b-8553-530bd515f14c item 0 key (EXTENT_CSUM EXTENT_CSUM 8798638964736) itemoff 1751 itemsize 2244 range start 8798638964736 end 8798641262592 length 2297856 When reading the above tree block, we have extent_buffer->refs = 2 in the context: - initial one from __alloc_extent_buffer() alloc_extent_buffer() |- __alloc_extent_buffer() |- atomic_set(&eb->refs, 1) - one being added to fs_info->buffer_radix alloc_extent_buffer() |- check_buffer_tree_ref() |- atomic_inc(&eb->refs) So if even we call free_extent_buffer() in read_tree_block or other similar situation, we only decrease the refs by 1, it doesn't reach 0 and won't be freed right now. The staled eb and its corrupted content will still be kept cached. Furthermore, we have several extra cases where we either don't do first key check or the check is not proper for all callers: - scrub We just don't have first key in this context. - shared tree block One tree block can be shared by several snapshot/subvolume trees. In that case, the first key check for one subvolume doesn't apply to another. So for the above reasons, a corrupted extent buffer can sneak into the buffer cache. [FIX] Call verify_level_key in read_block_for_search to do another verification. For that purpose the function is exported. Due to above reasons, although we can free corrupted extent buffer from cache, we still need the check in read_block_for_search(), for scrub and shared tree blocks. Link: https://bugzilla.kernel.org/show_bug.cgi?id=202755 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202757 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202759 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202761 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202767 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202769Reported-by: Yoon Jungyeon <jungyeon@gatech.edu> CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Debabrata Banerjee authored
commit 50b29d8f upstream. Instead of removing EXT4_MOUNT_JOURNAL_CHECKSUM from s_def_mount_opt as I assume was intended, all other options were blown away leading to _ext4_show_options() output being incorrect. Fixes: 1e381f60 ("ext4: do not allow journal_opts for fs w/o journal") Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kirill Tkhai authored
commit 310a997f upstream. It is never possible, that number of block groups decreases, since only online grow is supported. But after a growing occured, we have to zero inode tables for just created new block groups. Fixes: 19c5246d ("ext4: add new online resize interface") Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Barret Rhoden authored
commit 7bc04c5c upstream. When remounting with debug_want_extra_isize, we were not performing the same checks that we do during a normal mount. That allowed us to set a value for s_want_extra_isize that reached outside the s_inode_size. Fixes: e2b911c5 ("ext4: clean up feature test macros with predicate functions") Reported-by: syzbot+f584efa0ac7213c226b7@syzkaller.appspotmail.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Barret Rhoden <brho@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pan Bian authored
commit 8c380ab4 upstream. The reference to iloc.bh has been dropped in ext4_mark_iloc_dirty. However, the reference is dropped again if error occurs during ext4_handle_dirty_metadata, which may result in use-after-free bugs. Fixes: fb265c9c("ext4: add ext4_sb_bread() to disambiguate ENOMEM cases") Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Theodore Ts'o authored
commit e5d01196 upstream. In other places in fs/ext4/xattr.c, if e_value_inum is non-zero, the code ignores the value in e_value_offs. The e_value_offs *should* be zero, but we shouldn't depend upon it, since it might not be true in a corrupted/fuzzed file system. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202897 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202877Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit 31562b95 upstream. The sanity check in mb_find_extent() only checked that returned extent does not extend past blocksize * 8, however it should not extend past EXT4_CLUSTERS_PER_GROUP(sb). This can happen when clusters_per_group < blocksize * 8 and the tail of the bitmap is not properly filled by 1s which happened e.g. when ancient kernels have grown the filesystem. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiufei Xue authored
commit 742b06b5 upstream. We hit a BUG at fs/buffer.c:3057 if we detached the nbd device before unmounting ext4 filesystem. The typical chain of events leading to the BUG: jbd2_write_superblock submit_bh submit_bh_wbc BUG_ON(!buffer_mapped(bh)); The block device is removed and all the pages are invalidated. JBD2 was trying to write journal superblock to the block device which is no longer present. Fix this by checking the journal superblock's buffer head prior to submitting. Reported-by: Eric Ren <renzhen@linux.alibaba.com> Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergei Trofimovich authored
commit 46ca3f73 upstream. The bug manifests as an attempt to access deallocated memory: BUG: unable to handle kernel paging request at ffff9c8735448000 #PF error: [PROT] [WRITE] PGD 288a05067 P4D 288a05067 PUD 288a07067 PMD 7f60c2063 PTE 80000007f5448161 Oops: 0003 [#1] PREEMPT SMP CPU: 6 PID: 388 Comm: loadkeys Tainted: G C 5.0.0-rc6-00153-g5ded5871 #91 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M-D3H, BIOS F12 11/14/2013 RIP: 0010:__memmove+0x81/0x1a0 Code: 4c 89 4f 10 4c 89 47 18 48 8d 7f 20 73 d4 48 83 c2 20 e9 a2 00 00 00 66 90 48 89 d1 4c 8b 5c 16 f8 4c 8d 54 17 f8 48 c1 e9 03 <f3> 48 a5 4d 89 1a e9 0c 01 00 00 0f 1f 40 00 48 89 d1 4c 8b 1e 49 RSP: 0018:ffffa1b9002d7d08 EFLAGS: 00010203 RAX: ffff9c873541af43 RBX: ffff9c873541af43 RCX: 00000c6f105cd6bf RDX: 0000637882e986b6 RSI: ffff9c8735447ffb RDI: ffff9c8735447ffb RBP: ffff9c8739cd3800 R08: ffff9c873b802f00 R09: 00000000fffff73b R10: ffffffffb82b35f1 R11: 00505b1b004d5b1b R12: 0000000000000000 R13: ffff9c873541af3d R14: 000000000000000b R15: 000000000000000c FS: 00007f450c390580(0000) GS:ffff9c873f180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff9c8735448000 CR3: 00000007e213c002 CR4: 00000000000606e0 Call Trace: vt_do_kdgkb_ioctl+0x34d/0x440 vt_ioctl+0xba3/0x1190 ? __bpf_prog_run32+0x39/0x60 ? mem_cgroup_commit_charge+0x7b/0x4e0 tty_ioctl+0x23f/0x920 ? preempt_count_sub+0x98/0xe0 ? __seccomp_filter+0x67/0x600 do_vfs_ioctl+0xa2/0x6a0 ? syscall_trace_enter+0x192/0x2d0 ksys_ioctl+0x3a/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x54/0xe0 entry_SYSCALL_64_after_hwframe+0x49/0xbe The bug manifests on systemd systems with multiple vtcon devices: # cat /sys/devices/virtual/vtconsole/vtcon0/name (S) dummy device # cat /sys/devices/virtual/vtconsole/vtcon1/name (M) frame buffer device There systemd runs 'loadkeys' tool in tapallel for each vtcon instance. This causes two parallel ioctl(KDSKBSENT) calls to race into adding the same entry into 'func_table' array at: drivers/tty/vt/keyboard.c:vt_do_kdgkb_ioctl() The function has no locking around writes to 'func_table'. The simplest reproducer is to have initrams with the following init on a 8-CPU machine x86_64: #!/bin/sh loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & wait The change adds lock on write path only. Reads are still racy. CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Jiri Slaby <jslaby@suse.com> Link: https://lkml.org/lkml/2019/2/17/256Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yifeng Li authored
commit 75ddbc1f upstream. Previously, in the userspace, it was possible to use the "setterm" command from util-linux to blank the VT console by default, using the following command. According to the man page, > The force option keeps the screen blank even if a key is pressed. It was implemented by calling TIOCL_BLANKSCREEN. case BLANKSCREEN: ioctlarg = TIOCL_BLANKSCREEN; if (ioctl(STDIN_FILENO, TIOCLINUX, &ioctlarg)) warn(_("cannot force blank")); break; However, after Linux 4.12, this command ceased to work anymore, which is unexpected. By inspecting the kernel source, it shows that the issue was triggered by the side-effect from commit a4199f5e ("tty: Disable default console blanking interval"). The console blanking is implemented by function do_blank_screen() in vt.c: "blank_state" will be initialized to "blank_normal_wait" in con_init() if AND ONLY IF ("blankinterval" > 0). If "blankinterval" is 0, "blank_state" will be "blank_off" (== 0), and a call to do_blank_screen() will always abort, even if a forced blanking is required from the user by calling TIOCL_BLANKSCREEN, the console won't be blanked. This behavior is unexpected from a user's point-of-view, since it's not mentioned in any documentation. The setterm man page suggests it will always work, and the kernel comments in uapi/linux/tiocl.h says > /* keep screen blank even if a key is pressed */ > #define TIOCL_BLANKSCREEN 14 To fix it, we simply remove the "blank_state != blank_off" check, as pointed out by Nicolas Pitre, this check doesn't logically make sense and it's safe to remove. Suggested-by: Nicolas Pitre <nicolas.pitre@linaro.org> Fixes: a4199f5e ("tty: Disable default console blanking interval") Signed-off-by: Yifeng Li <tomli@tomli.me> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Packham authored
commit d4197009 upstream. When the physmap_of_core.c code was merged into physmap-core.c the ability to use MTD_PHYSMAP_OF with only MTD_RAM selected was lost. Restore this by adding MTD_RAM to the dependencies of MTD_PHYSMAP. Fixes: commit 642b1e8d ("mtd: maps: Merge physmap_of.c into physmap-core.c") Cc: <stable@vger.kernel.org> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Packham authored
commit 64d14c6f upstream. When the gpio-addr-flash.c driver was merged with physmap-core.c the code to store the current gpio_values was lost. This meant that once a gpio was asserted it was never de-asserted. Fix this by storing the current offset in gpio_values like the old driver used to. Fixes: commit ba32ce95 ("mtd: maps: Merge gpio-addr-flash.c into physmap-core.c") Cc: <stable@vger.kernel.org> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Sverdlin authored
commit 2b75ebee upstream. It was observed that reads crossing 4K address boundary are failing. This limitation is mentioned in Intel documents: Intel(R) 9 Series Chipset Family Platform Controller Hub (PCH) Datasheet: "5.26.3 Flash Access Program Register Access: * Program Register Accesses are not allowed to cross a 4 KB boundary..." Enhanced Serial Peripheral Interface (eSPI) Interface Base Specification (for Client and Server Platforms): "5.1.4 Address For other memory transactions, the address may start or end at any byte boundary. However, the address and payload length combination must not cross the naturally aligned address boundary of the corresponding Maximum Payload Size. It must not cross a 4 KB address boundary." Avoid this by splitting an operation crossing the boundary into two operations. Fixes: 8afda8b2 ("spi-nor: Add support for Intel SPI serial flash controller") Cc: stable@vger.kernel.org Reported-by: Romain Porte <romain.porte@nokia.com> Tested-by: Pascal Fabreges <pascal.fabreges@nokia.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Osipenko authored
commit ea611d1c upstream. The FPS_PERIOD_MAX_US definitions are swapped for MAX20024 and MAX77620, fix it. Cc: stable <stable@vger.kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steve Twiss authored
commit 6b4814a9 upstream. Mismatch between what is found in the Datasheets for DA9063 and DA9063L provided by Dialog Semiconductor, and the register names provided in the MFD registers file. The changes are for the OTP (one-time-programming) control registers. The two naming errors are OPT instead of OTP, and COUNT instead of CONT (i.e. control). Cc: Stable <stable@vger.kernel.org> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Erik Schmauss authored
commit 11207b4d upstream. ACPICA commit c14f17fa0acf8c93497ce04b9a7f4ada51b69383 This flag should not be included in #ifndef CONFIG_ACPI. It should be used unconditionally. Link: https://github.com/acpica/acpica/commit/c14f17fa Fixes: aa9aaa4d ("ACPI: use different default debug value than ACPICA") Reported-by: Gabriel C <nix.or.die@gmail.com> Tested-by: Gabriel C <nix.or.die@gmail.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Cc: 5.1+ <stable@vger.kernel.org> 5.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rajat Jain authored
commit 2f844b61 upstream. I noticed that recently multiple systems (chromebooks) couldn't wake from S0ix using LID or Keyboard after updating to a newer kernel. I bisected and it turned up commit f941d3e4 ("ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle"). I checked that the issue got fixed if that commit was reverted. I debugged and found that although PNP0C0D:00 (representing the LID) is wake capable and should wakeup the system per the code in acpi_wakeup_gpe_init() and in drivers/acpi/button.c: localhost /sys # cat /proc/acpi/wakeup Device S-state Status Sysfs node LID0 S4 *enabled platform:PNP0C0D:00 CREC S5 *disabled platform:GOOG0004:00 *disabled platform:cros-ec-dev.1.auto *disabled platform:cros-ec-accel.0 *disabled platform:cros-ec-accel.1 *disabled platform:cros-ec-gyro.0 *disabled platform:cros-ec-ring.0 *disabled platform:cros-usbpd-charger.2.auto *disabled platform:cros-usbpd-logger.3.auto D015 S3 *enabled i2c:i2c-ELAN0000:00 PENH S3 *enabled platform:PRP0001:00 XHCI S3 *enabled pci:0000:00:14.0 GLAN S4 *disabled WIFI S3 *disabled pci:0000:00:14.3 localhost /sys # On debugging, I found that its corresponding GPE is not being enabled. The particular GPE's "gpe_register_info->enable_for_wake" does not have any bits set when acpi_enable_all_wakeup_gpes() comes around to use it. I looked at code and could not find any other code path that should set the bits in "enable_for_wake" bitmask for the wake enabled devices for s2idle. [I do see that it happens for S3 in acpi_sleep_prepare()]. Thus I used the same call to enable the GPEs for wake enabled devices, and verified that this fixes the regression I was seeing on multiple of my devices. [ rjw: The problem is that commit f941d3e4 ("ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle") forgot to add the acpi_enable_wakeup_devices() call for s2idle along with acpi_enable_all_wakeup_gpes(). ] Fixes: f941d3e4 ("ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle") Link: https://bugzilla.kernel.org/show_bug.cgi?id=203579Signed-off-by: Rajat Jain <rajatja@google.com> [ rjw: Subject & changelog ] Cc: 5.0+ <stable@vger.kernel.org> # 5.0+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-