- 06 Sep, 2019 11 commits
-
-
Pierre-Louis Bossart authored
[ Upstream commit 664b1658 ] Two off-by-one errors: INTSTAT0 missed BIT(31) and INTSTAT1 is only defined on first 16 bits. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190725234032.21152-15-pierre-louis.bossart@linux.intel.comSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pierre-Louis Bossart authored
[ Upstream commit b07dd9b4 ] wrong prefix and wrong macro. Signed-off-by:
-
Keith Busch authored
[ Upstream commit bd46a906 ] Ensure the controller is not in the NEW state when nvme_probe() exits. This will always allow a subsequent nvme_remove() to set the state to DELETING, fixing a potential race between the initial asynchronous probe and device removal. Reported-by:
Li Zhong <lizhongfs@gmail.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
-
Sagi Grimberg authored
[ Upstream commit b9156dae ] When the user issues a command with side effects, we will end up freezing the namespace request queue when updating disk info (and the same for the corresponding mpath disk node). However, we are not freezing the mpath node request queue, which means that mpath I/O can still come in and block on blk_queue_enter (called from nvme_ns_head_make_request -> direct_make_request). This is a deadlock, because blk_queue_enter will block until the inner namespace request queue is unfroze, but that process is blocked because the namespace revalidation is trying to update the mpath disk info and freeze its request queue (which will never complete because of the I/O that is blocked on blk_queue_enter). Fix this by freezing all the subsystem nsheads request queues before executing the passthru command. Given that these commands are infrequent we should not worry about this temporary I/O freeze to keep things sane. Here is the matching hang traces: -- [ 374.465002] INFO: task systemd-udevd:17994 blocked for more than 122 seconds. [ 374.472975] Not tainted 5.2.0-rc3-mpdebug+ #42 [ 374.478522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 374.487274] systemd-udevd D 0 17994 1 0x00000000 [ 374.493407] Call Trace: [ 374.496145] __schedule+0x2ef/0x620 [ 374.500047] schedule+0x38/0xa0 [ 374.503569] blk_queue_enter+0x139/0x220 [ 374.507959] ? remove_wait_queue+0x60/0x60 [ 374.512540] direct_make_request+0x60/0x130 [ 374.517219] nvme_ns_head_make_request+0x11d/0x420 [nvme_core] [ 374.523740] ? generic_make_request_checks+0x307/0x6f0 [ 374.529484] generic_make_request+0x10d/0x2e0 [ 374.534356] submit_bio+0x75/0x140 [ 374.538163] ? guard_bio_eod+0x32/0xe0 [ 374.542361] submit_bh_wbc+0x171/0x1b0 [ 374.546553] block_read_full_page+0x1ed/0x330 [ 374.551426] ? check_disk_change+0x70/0x70 [ 374.556008] ? scan_shadow_nodes+0x30/0x30 [ 374.560588] blkdev_readpage+0x18/0x20 [ 374.564783] do_read_cache_page+0x301/0x860 [ 374.569463] ? blkdev_writepages+0x10/0x10 [ 374.574037] ? prep_new_page+0x88/0x130 [ 374.578329] ? get_page_from_freelist+0xa2f/0x1280 [ 374.583688] ? __alloc_pages_nodemask+0x179/0x320 [ 374.588947] read_cache_page+0x12/0x20 [ 374.593142] read_dev_sector+0x2d/0xd0 [ 374.597337] read_lba+0x104/0x1f0 [ 374.601046] find_valid_gpt+0xfa/0x720 [ 374.605243] ? string_nocheck+0x58/0x70 [ 374.609534] ? find_valid_gpt+0x720/0x720 [ 374.614016] efi_partition+0x89/0x430 [ 374.618113] ? string+0x48/0x60 [ 374.621632] ? snprintf+0x49/0x70 [ 374.625339] ? find_valid_gpt+0x720/0x720 [ 374.629828] check_partition+0x116/0x210 [ 374.634214] rescan_partitions+0xb6/0x360 [ 374.638699] __blkdev_reread_part+0x64/0x70 [ 374.643377] blkdev_reread_part+0x23/0x40 [ 374.647860] blkdev_ioctl+0x48c/0x990 [ 374.651956] block_ioctl+0x41/0x50 [ 374.655766] do_vfs_ioctl+0xa7/0x600 [ 374.659766] ? locks_lock_inode_wait+0xb1/0x150 [ 374.664832] ksys_ioctl+0x67/0x90 [ 374.668539] __x64_sys_ioctl+0x1a/0x20 [ 374.672732] do_syscall_64+0x5a/0x1c0 [ 374.676828] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 374.738474] INFO: task nvmeadm:49141 blocked for more than 123 seconds. [ 374.745871] Not tainted 5.2.0-rc3-mpdebug+ #42 [ 374.751419] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 374.760170] nvmeadm D 0 49141 36333 0x00004080 [ 374.766301] Call Trace: [ 374.769038] __schedule+0x2ef/0x620 [ 374.772939] schedule+0x38/0xa0 [ 374.776452] blk_mq_freeze_queue_wait+0x59/0x100 [ 374.781614] ? remove_wait_queue+0x60/0x60 [ 374.786192] blk_mq_freeze_queue+0x1a/0x20 [ 374.790773] nvme_update_disk_info.isra.57+0x5f/0x350 [nvme_core] [ 374.797582] ? nvme_identify_ns.isra.50+0x71/0xc0 [nvme_core] [ 374.804006] __nvme_revalidate_disk+0xe5/0x110 [nvme_core] [ 374.810139] nvme_revalidate_disk+0xa6/0x120 [nvme_core] [ 374.816078] ? nvme_submit_user_cmd+0x11e/0x320 [nvme_core] [ 374.822299] nvme_user_cmd+0x264/0x370 [nvme_core] [ 374.827661] nvme_dev_ioctl+0x112/0x1d0 [nvme_core] [ 374.833114] do_vfs_ioctl+0xa7/0x600 [ 374.837117] ? __audit_syscall_entry+0xdd/0x130 [ 374.842184] ksys_ioctl+0x67/0x90 [ 374.845891] __x64_sys_ioctl+0x1a/0x20 [ 374.850082] do_syscall_64+0x5a/0x1c0 [ 374.854178] entry_SYSCALL_64_after_hwframe+0x44/0xa9 -- Reported-by:
James Puthukattukaran <james.puthukattukaran@oracle.com> Tested-by:
-
Logan Gunthorpe authored
[ Upstream commit 86b9a63e ] After calling nvme_loop_delete_ctrl(), the controllers will not yet be deleted because nvme_delete_ctrl() only schedules work to do the delete. This means a race can occur if a port is removed but there are still active controllers trying to access that memory. To fix this, flush the nvme_delete_wq before returning from nvme_loop_remove_port() so that any controllers that might be in the process of being deleted won't access a freed port. Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by : Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 5dc84855 ] In the in-kernel afs filesystem, d_fsdata is set with the data version of the parent directory. afs_d_revalidate() will update this to the current directory version, but it shouldn't do this if it the value it read from d_fsdata is the same as no lock is held and cmpxchg() is not used. Fix the code to only change the value if it is different from the current directory version. Fixes: 260a9803 ("[AFS]: Add "directory write" support.") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit a6eed4ab ] In afs_read_dir(), there is an if statement on line 255 to check whether req->pages is NULL: if (!req->pages) goto error; If req->pages is NULL, afs_put_read() on line 337 is executed. In afs_put_read(), req->pages[i] is used on line 195. Thus, a possible null-pointer dereference may occur in this case. To fix this possible bug, an if statement is added in afs_put_read() to check req->pages. This bug is found by a static analysis tool STCheck written by us. Fixes: f3ddee8d ("afs: Fix directory handling") Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Marc Dionne authored
[ Upstream commit 4a46fdba ] afs_deliver_vl_get_entry_by_name_u() scans through the vl entry received from the volume location server and builds a return list containing the sites that are currently valid. When assigning values for the return list, the index into the vl entry (i) is used rather than the one for the new list (entry->nr_server). If all sites are usable, this works out fine as the indices will match. If some sites are not valid, for example if AFS_VLSF_DONTUSE is set, fs_mask and the uuid will be set for the wrong return site. Fix this by using entry->nr_server as the index into the arrays being filled in rather than i. This can lead to EDESTADDRREQ errors if none of the returned sites have a valid fs_mask. Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
Jeffrey Altman <jaltman@auristor.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 2067b2b3 ] Fix the service handler function for the CB.ProbeUuid RPC call so that it replies in the correct manner - that is an empty reply for success and an abort of 1 for failure. Putting 0 or 1 in an integer in the body of the reply should result in the fileserver throwing an RX_PROTOCOL_ERROR abort and discarding its record of the client; older servers, however, don't necessarily check that all the data got consumed, and so might incorrectly think that they got a positive response and associate the client with the wrong host record. If the client is incorrectly associated, this will result in callbacks intended for a different client being delivered to this one and then, when the other client connects and responds positively, all of the callback promises meant for the client that issued the improper response will be lost and it won't receive any further change notifications. Fixes: 9396d496 ("afs: support the CB.ProbeUuid RPC op") Signed-off-by:
-
Anthony Iliopoulos authored
[ Upstream commit fab7772b ] When CONFIG_NVME_MULTIPATH is set, only the hidden gendisk associated with the per-controller ns is run through revalidate_disk when a rescan is triggered, while the visible blockdev never gets its size (bdev->bd_inode->i_size) updated to reflect any capacity changes that may have occurred. This prevents online resizing of nvme block devices and in extension of any filesystems atop that will are unable to expand while mounted, as userspace relies on the blockdev size for obtaining the disk capacity (via BLKGETSIZE/64 ioctls). Fix this by explicitly revalidating the actual namespace gendisk in addition to the per-controller gendisk, when multipath is enabled. Signed-off-by:
Anthony Iliopoulos <ailiopoulos@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 5d6fb560 ] clang-9 points out that there are two variables that depending on the configuration may only be used in an ARRAY_SIZE() expression but not referenced: drivers/dma/ste_dma40.c:145:12: error: variable 'd40_backup_regs' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration] static u32 d40_backup_regs[] = { ^ drivers/dma/ste_dma40.c:214:12: error: variable 'd40_backup_regs_chan' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration] static u32 d40_backup_regs_chan[] = { Mark these __maybe_unused to shut up the warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190712091357.744515-1-arnd@arndb.deSigned-off-by:
-
- 29 Aug, 2019 29 commits
-
-
Greg Kroah-Hartman authored
-
David Howells authored
[ Upstream commit 68553f1a ] Fix rxrpc_unuse_local() to handle a NULL local pointer as it can be called on an unbound socket on which rx->local is not yet set. The following reproduced (includes omitted): int main(void) { socket(AF_RXRPC, SOCK_DGRAM, AF_INET); return 0; } causes the following oops to occur: BUG: kernel NULL pointer dereference, address: 0000000000000010 ... RIP: 0010:rxrpc_unuse_local+0x8/0x1b ... Call Trace: rxrpc_release+0x2b5/0x338 __sock_release+0x37/0xa1 sock_close+0x14/0x17 __fput+0x115/0x1e9 task_work_run+0x72/0x98 do_exit+0x51b/0xa7a ? __context_tracking_exit+0x4e/0x10e do_group_exit+0xab/0xab __x64_sys_exit_group+0x14/0x17 do_syscall_64+0x89/0x1d4 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: syzbot+20dee719a2e090427b5f@syzkaller.appspotmail.com Fixes: 730c5fd4 ("rxrpc: Fix local endpoint refcounting") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
David Howells authored
[ Upstream commit b00df840 ] When a local endpoint (struct rxrpc_local) ceases to be in use by any AF_RXRPC sockets, it starts the process of being destroyed, but this doesn't cause it to be removed from the namespace endpoint list immediately as tearing it down isn't trivial and can't be done in softirq context, so it gets deferred. If a new socket comes along that wants to bind to the same endpoint, a new rxrpc_local object will be allocated and rxrpc_lookup_local() will use list_replace() to substitute the new one for the old. Then, when the dying object gets to rxrpc_local_destroyer(), it is removed unconditionally from whatever list it is on by calling list_del_init(). However, list_replace() doesn't reset the pointers in the replaced list_head and so the list_del_init() will likely corrupt the local endpoints list. Fix this by using list_replace_init() instead. Fixes: 730c5fd4 ("rxrpc: Fix local endpoint refcounting") Reported-by: syzbot+193e29e9387ea5837f1d@syzkaller.appspotmail.com Signed-off-by:
-
David Howells authored
commit 06d9532f upstream. rxrpc_queue_local() attempts to queue the local endpoint it is given and then, if successful, prints a trace line. The trace line includes the current usage count - but we're not allowed to look at the local endpoint at this point as we passed our ref on it to the workqueue. Fix this by reading the usage count before queuing the work item. Also fix the reading of local->debug_id for trace lines, which must be done with the same consideration as reading the usage count. Fixes: 09d2bf59 ("rxrpc: Add a tracepoint to track rxrpc_local refcounting") Reported-by: syzbot+78e71c5bab4f76a6a719@syzkaller.appspotmail.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Howells authored
commit 730c5fd4 upstream. The object lifetime management on the rxrpc_local struct is broken in that the rxrpc_local_processor() function is expected to clean up and remove an object - but it may get requeued by packets coming in on the backing UDP socket once it starts running. This may result in the assertion in rxrpc_local_rcu() firing because the memory has been scheduled for RCU destruction whilst still queued: rxrpc: Assertion failed ------------[ cut here ]------------ kernel BUG at net/rxrpc/local_object.c:468! Note that if the processor comes around before the RCU free function, it will just do nothing because ->dead is true. Fix this by adding a separate refcount to count active users of the endpoint that causes the endpoint to be destroyed when it reaches 0. The original refcount can then be used to refcount objects through the work processor and cause the memory to be rcu freed when that reaches 0. Fixes: 4f95dd78 ("rxrpc: Rework local endpoint management") Reported-by: syzbot+1e0edc4b8b7494c28450@syzkaller.appspotmail.com Signed-off-by:
-
Alastair D'Silva authored
The upstream commit: 22e9c88d ("powerpc/64: reuse PPC32 static inline flush_dcache_range()") has a similar effect, but since it is a rewrite of the assembler to C, is too invasive for stable. This patch is a minimal fix to address the issue in assembler. This patch applies cleanly to v5.2, v4.19 & v4.14. When calling flush_(inval_)dcache_range with a size >4GB, we were masking off the upper 32 bits, so we would incorrectly flush a range smaller than intended. This patch replaces the 32 bit shifts with 64 bit ones, so that the full size is accounted for. Signed-off-by:
Alastair D'Silva <alastair@d-silva.org> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit e0702d90 ] This function is supposed to return error pointers so it matches the dmz_get_rnd_zone_for_reclaim() function. The current code could lead to a NULL dereference in dmz_do_reclaim() Fixes: b234c6d7 ("dm zoned: improve error handling in reclaim") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Darrick J. Wong authored
commit 710d707d upstream. During testing of xfs/141 on a V4 filesystem, I observed some inconsistent behavior with regards to resources that are held (i.e. remain locked) across a defer roll. The transaction roll always gives the defer roll function a new transaction, even if committing the old transaction fails. However, the defer roll function only rejoins the held resources if the transaction commit succeedied. This means that callers of defer roll have to figure out whether the held resources are attached to the transaction being passed back. Worse yet, if the defer roll was part of a defer finish call, we have a third possibility: the defer finish could pass back a dirty transaction with dirty held resources and an error code. The only sane way to handle all of these scenarios is to require that the code that held the resource either cancel the transaction before unlocking and releasing the resources, or use functions that detach resources from a transaction properly (e.g. xfs_trans_brelse) if they need to drop the reference before committing or cancelling the transaction. In order to make this so, change the defer roll code to join held resources to the new transaction unconditionally and fix all the bhold callers to release the held buffers correctly. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> [mcgrof: fixes kz#204223 ] Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
-
Allison Henderson authored
commit 068f985a upstream. This patch adds xfs_attr_remove_args. These sub-routines remove the attributes specified in @args. We will use this later for setting parent pointers as a deferred attribute operation. Signed-off-by:
Allison Henderson <allison.henderson@oracle.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Allison Henderson authored
commit 2f3cd809 upstream. This patch adds xfs_attr_set_args and xfs_bmap_set_attrforkoff. These sub-routines set the attributes specified in @args. We will use this later for setting parent pointers as a deferred attribute operation. [dgc: remove attr fork init code from xfs_attr_set_args().] [dgc: xfs_attr_try_sf_addname() NULLs args.trans after commit.] [dgc: correct sf add error handling.] Signed-off-by:
-
Allison Henderson authored
commit 4c74a56b upstream. This patch adds a subroutine xfs_attr_try_sf_addname used by xfs_attr_set. This subrotine will attempt to add the attribute name specified in args in shortform, as well and perform error handling previously done in xfs_attr_set. This patch helps to pre-simplify xfs_attr_set for reviewing purposes and reduce indentation. New function will be added in the next patch. [dgc: moved commit to helper function, too.] Signed-off-by:
-
Allison Henderson authored
commit e2421f0b upstream. This patch moves fs/xfs/xfs_attr.h to fs/xfs/libxfs/xfs_attr.h since xfs_attr.c is in libxfs. We will need these later in xfsprogs. Signed-off-by:
-
Brian Foster authored
commit 6958d11f upstream. We've had rather rare reports of bmap btree block corruption where the bmap root block has a level count of zero. The root cause of the corruption is so far unknown. We do have verifier checks to detect this form of on-disk corruption, but this doesn't cover a memory corruption variant of the problem. The latter is a reasonable possibility because the root block is part of the inode fork and can reside in-core for some time before inode extents are read. If this occurs, it leads to a system crash such as the following: BUG: unable to handle kernel paging request at ffffffff00000221 PF error: [normal kernel read fault] ... RIP: 0010:xfs_trans_brelse+0xf/0x200 [xfs] ... Call Trace: xfs_iread_extents+0x379/0x540 [xfs] xfs_file_iomap_begin_delay+0x11a/0xb40 [xfs] ? xfs_attr_get+0xd1/0x120 [xfs] ? iomap_write_begin.constprop.40+0x2d0/0x2d0 xfs_file_iomap_begin+0x4c4/0x6d0 [xfs] ? __vfs_getxattr+0x53/0x70 ? iomap_write_begin.constprop.40+0x2d0/0x2d0 iomap_apply+0x63/0x130 ? iomap_write_begin.constprop.40+0x2d0/0x2d0 iomap_file_buffered_write+0x62/0x90 ? iomap_write_begin.constprop.40+0x2d0/0x2d0 xfs_file_buffered_aio_write+0xe4/0x3b0 [xfs] __vfs_write+0x150/0x1b0 vfs_write+0xba/0x1c0 ksys_pwrite64+0x64/0xa0 do_syscall_64+0x5a/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe The crash occurs because xfs_iread_extents() attempts to release an uninitialized buffer pointer as the level == 0 value prevented the buffer from ever being allocated or read. Change the level > 0 assert to an explicit error check in xfs_iread_extents() to avoid crashing the kernel in the event of localized, in-core inode corruption. Signed-off-by:
-
Darrick J. Wong authored
commit 1fb254aa upstream. Benjamin Moody reported to Debian that XFS partially wedges when a chgrp fails on account of being out of disk quota. I ran his reproducer script: # adduser dummy # adduser dummy plugdev # dd if=/dev/zero bs=1M count=100 of=test.img # mkfs.xfs test.img # mount -t xfs -o gquota test.img /mnt # mkdir -p /mnt/dummy # chown -c dummy /mnt/dummy # xfs_quota -xc 'limit -g bsoft=100k bhard=100k plugdev' /mnt (and then as user dummy) $ dd if=/dev/urandom bs=1M count=50 of=/mnt/dummy/foo $ chgrp plugdev /mnt/dummy/foo and saw: ================================================ WARNING: lock held when returning to user space! 5.3.0-rc5 #rc5 Tainted: G W ------------------------------------------------ chgrp/47006 is leaving the kernel with locks still held! 1 lock held by chgrp/47006: #0: 000000006664ea2d (&xfs_nondir_ilock_class){++++}, at: xfs_ilock+0xd2/0x290 [xfs] ...which is clearly caused by xfs_setattr_nonsize failing to unlock the ILOCK after the xfs_qm_vop_chown_reserve call fails. Add the missing unlock. Reported-by: benjamin.moody@gmail.com Fixes: 253f4911 ("xfs: better xfs_trans_alloc interface") Signed-off-by:
Salvatore Bonaccorso <carnil@debian.org> Signed-off-by:
-
Henry Burns authored
commit 701d6785 upstream. In zs_destroy_pool() we call flush_work(&pool->free_work). However, we have no guarantee that migration isn't happening in the background at that time. Since migration can't directly free pages, it relies on free_work being scheduled to free the pages. But there's nothing preventing an in-progress migrate from queuing the work *after* zs_unregister_migration() has called flush_work(). Which would mean pages still pointing at the inode when we free it. Since we know at destroy time all objects should be free, no new migrations can come in (since zs_page_isolate() fails for fully-free zspages). This means it is sufficient to track a "# isolated zspages" count by class, and have the destroy logic ensure all such pages have drained before proceeding. Keeping that state under the class spinlock keeps the logic straightforward. In this case a memory leak could lead to an eventual crash if compaction hits the leaked page. This crash would only occur if people are changing their zswap backend at runtime (which eventually starts destruction). Link: http://lkml.kernel.org/r/20190809181751.219326-2-henryburns@google.com Fixes: 48b4800a ("zsmalloc: page migration support") Signed-off-by:
Henry Burns <henryburns@google.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Henry Burns <henrywolfeburns@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Jonathan Adams <jwadams@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Henry Burns authored
commit 1a87aa03 upstream. In zs_page_migrate() we call putback_zspage() after we have finished migrating all pages in this zspage. However, the return value is ignored. If a zs_free() races in between zs_page_isolate() and zs_page_migrate(), freeing the last object in the zspage, putback_zspage() will leave the page in ZS_EMPTY for potentially an unbounded amount of time. To fix this, we need to do the same thing as zs_page_putback() does: schedule free_work to occur. To avoid duplicated code, move the sequence to a new putback_zspage_deferred() function which both zs_page_migrate() and zs_page_putback() call. Link: http://lkml.kernel.org/r/20190809181751.219326-1-henryburns@google.com Fixes: 48b4800a ("zsmalloc: page migration support") Signed-off-by:
-
Vlastimil Babka authored
commit f7da677b upstream. THP splitting path is missing the split_page_owner() call that split_page() has. As a result, split THP pages are wrongly reported in the page_owner file as order-9 pages. Furthermore when the former head page is freed, the remaining former tail pages are not listed in the page_owner file at all. This patch fixes that by adding the split_page_owner() call into __split_huge_page(). Link: http://lkml.kernel.org/r/20190820131828.22684-2-vbabka@suse.cz Fixes: a9627bc5 ("mm/page_owner: introduce split_page_owner and replace manual handling") Reported-by:
Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Michael Kelley authored
commit d0ff14fd upstream. If alloc_descs() fails before irq_sysfs_init() has run, free_desc() in the cleanup path will call kobject_del() even though the kobject has not been added with kobject_add(). Fix this by making the call to kobject_del() conditional on whether irq_sysfs_init() has run. This problem surfaced because commit aa30f47c ("kobject: Add support for default attribute groups to kobj_type") makes kobject_del() stricter about pairing with kobject_add(). If the pairing is incorrrect, a WARNING and backtrace occur in sysfs_remove_group() because there is no parent. [ tglx: Add a comment to the code and make it work with CONFIG_SYSFS=n ] Fixes: ecb3f394 ("genirq: Expose interrupt information through sysfs") Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
Dmitry Fomichev authored
commit 75d66ffb upstream. dm-zoned is observed to lock up or livelock in case of hardware failure or some misconfiguration of the backing zoned device. This patch adds a new dm-zoned target function that checks the status of the backing device. If the request queue of the backing device is found to be in dying state or the SCSI backing device enters offline state, the health check code sets a dm-zoned target flag prompting all further incoming I/O to be rejected. In order to detect backing device failures timely, this new function is called in the request mapping path, at the beginning of every reclaim run and before performing any metadata I/O. The proper way out of this situation is to do dmsetup remove <dm-zoned target> and recreate the target when the problem with the backing device is resolved. Fixes: 3b1a94c8 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Dmitry Fomichev authored
commit d7428c50 upstream. Some errors are ignored in the I/O path during queueing chunks for processing by chunk works. Since at least these errors are transient in nature, it should be possible to retry the failed incoming commands. The fix - Errors that can happen while queueing chunks are carried upwards to the main mapping function and it now returns DM_MAPIO_REQUEUE for any incoming requests that can not be properly queued. Error logging/debug messages are added where needed. Fixes: 3b1a94c8 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by:
-
Dmitry Fomichev authored
commit b234c6d7 upstream. There are several places in reclaim code where errors are not propagated to the main function, dmz_reclaim(). This function is responsible for unlocking zones that might be still locked at the end of any failed reclaim iterations. As the result, some device zones may be left permanently locked for reclaim, degrading target's capability to reclaim zones. This patch fixes these issues as follows - Make sure that dmz_reclaim_buf(), dmz_reclaim_seq_data() and dmz_reclaim_rnd_data() return error codes to the caller. dmz_reclaim() function is renamed to dmz_do_reclaim() to avoid clashing with "struct dmz_reclaim" and is modified to return the error to the caller. dmz_get_zone_for_reclaim() now returns an error instead of NULL pointer and reclaim code checks for that error. Error logging/debug messages are added where necessary. Fixes: 3b1a94c8 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by:
-
Mikulas Patocka authored
commit 1cfd5d33 upstream. If the sector number is too high, dm_table_find_target() should return a pointer to a zeroed dm_target structure (the caller should test it with dm_target_is_valid). However, for some table sizes, the code in dm_table_find_target() that performs btree lookup will access out of bound memory structures. Fix this bug by testing the sector number at the beginning of dm_table_find_target(). Also, add an "inline" keyword to the function dm_table_get_size() because this is a hot path. Fixes: 512875bd ("dm: table detect io beyond device") Cc: stable@vger.kernel.org Reported-by:
Zhang Tao <kontais@zoho.com> Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
ZhangXiaoxu authored
commit ae148243 upstream. In commit 6096d91a ("dm space map metadata: fix occasional leak of a metadata block on resize"), we refactor the commit logic to a new function 'apply_bops'. But when that logic was replaced in out() the return value was not stored. This may lead out() returning a wrong value to the caller. Fixes: 6096d91a ("dm space map metadata: fix occasional leak of a metadata block on resize") Cc: stable@vger.kernel.org Signed-off-by:
ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
-
Wenwen Wang authored
commit dc1a3e8e upstream. If rs_prepare_reshape() fails, no cleanup is executed, leading to leak of the raid_set structure allocated at the beginning of raid_ctr(). To fix this issue, go to the label 'bad' if the error occurs. Fixes: 11e47232 ("dm raid: stop keeping raid set frozen altogether") Cc: stable@vger.kernel.org Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
-
Mikulas Patocka authored
commit 5729b6e5 upstream. Fix a crash that was introduced by the commit 724376a0. The crash is reported here: https://gitlab.com/cryptsetup/cryptsetup/issues/468 When reading from the integrity device, the function dm_integrity_map_continue calls find_journal_node to find out if the location to read is present in the journal. Then, it calculates how many sectors are consecutively stored in the journal. Then, it locks the range with add_new_range and wait_and_add_new_range. The problem is that during wait_and_add_new_range, we hold no locks (we don't hold ic->endio_wait.lock and we don't hold a range lock), so the journal may change arbitrarily while wait_and_add_new_range sleeps. The code then goes to __journal_read_write and hits BUG_ON(journal_entry_get_sector(je) != logical_sector); because the journal has changed. In order to fix this bug, we need to re-check the journal location after wait_and_add_new_range. We restrict the length to one block in order to not complicate the code too much. Fixes: 724376a0 ("dm integrity: implement fair range locks") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
-
ZhangXiaoxu authored
commit e4f9d601 upstream. When btree_split_beneath() splits a node to two new children, it will allocate two blocks: left and right. If right block's allocation failed, the left block will be unlocked and marked dirty. If this happened, the left block'ss content is zero, because it wasn't initialized with the btree struct before the attempot to allocate the right block. Upon return, when flushing the left block to disk, the validator will fail when check this block. Then a BUG_ON is raised. Fix this by completely initializing the left block before allocating and initializing the right block. Fixes: 4dcb8b57 ("dm btree: fix leak of bufio-backed block in btree_split_beneath error path") Cc: stable@vger.kernel.org Signed-off-by:
-
Dmitry Fomichev authored
commit d1fef414 upstream. This patch fixes a problem in dm-kcopyd that may leave jobs in complete queue indefinitely in the event of backing storage failure. This behavior has been observed while running 100% write file fio workload against an XFS volume created on top of a dm-zoned target device. If the underlying storage of dm-zoned goes to offline state under I/O, kcopyd sometimes never issues the end copy callback and dm-zoned reclaim work hangs indefinitely waiting for that completion. This behavior was traced down to the error handling code in process_jobs() function that places the failed job to complete_jobs queue, but doesn't wake up the job handler. In case of backing device failure, all outstanding jobs may end up going to complete_jobs queue via this code path and then stay there forever because there are no more successful I/O jobs to wake up the job handler. This patch adds a wake() call to always wake up kcopyd job wait queue for all I/O jobs that fail before dm_io() gets called for that job. The patch also sets the write error status in all sub jobs that are failed because their master job has failed. Fixes: b73c67c2 ("dm kcopyd: add sequential write feature") Cc: stable@vger.kernel.org Signed-off-by:
-
John Hubbard authored
commit 7846f58f upstream. commit a90118c4 ("x86/boot: Save fields explicitly, zero out everything else") had two errors: * It preserved boot_params.acpi_rsdp_addr, and * It failed to preserve boot_params.hdr Therefore, zero out acpi_rsdp_addr, and preserve hdr. Fixes: a90118c4 ("x86/boot: Save fields explicitly, zero out everything else") Reported-by:
Neil MacLeod <neil@nmacleod.com> Suggested-by:
John Hubbard <jhubbard@nvidia.com> Signed-off-by:
-
John Hubbard authored
commit a90118c4 upstream. Recent gcc compilers (gcc 9.1) generate warnings about an out of bounds memset, if the memset goes accross several fields of a struct. This generated a couple of warnings on x86_64 builds in sanitize_boot_params(). Fix this by explicitly saving the fields in struct boot_params that are intended to be preserved, and zeroing all the rest. [ tglx: Tagged for stable as it breaks the warning free build there as well ] Suggested-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
