- 03 Nov, 2011 40 commits
-
-
Guennadi Liakhovetski authored
If the sh_mobile_csi2 driver didn't attach to a client, normally, because the respective device connects to the SoC over the parallel CEU interface and doesn't use the CSI-2 controller, it also shouldn't call pm_runtime_put() on attempted disconnect. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Guennadi Liakhovetski authored
Using the internally cached pixel code, instead of the one, provided by the soc-camera, removes one more use of struct soc_camera_device in these drivers. Also remove the no longer needed soc_camera_from_i2c() inline function. Signed-off-by:
-
Guennadi Liakhovetski authored
Remove most trivial uses of struct soc_camera_device from most client drivers, abstracting some of them inside inline functions. Next steps will eliminate remaining uses and modify inline functions to not use struct soc_camera_device. Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> [g.liakhovetski@gmx.de: mt9m001 hunk moved to an earlier patch] Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Guennadi Liakhovetski authored
Currently soc-camera can use power regulators and platform specific methods to power clients up and down. Additionally, client drivers can provide their own subdevice .s_power() methods, acting directly on the device. This patch adds calls to this method, when external power supplies are on. Signed-off-by:
-
Guennadi Liakhovetski authored
The life-time of soc-camera device objects can be longer, than the time, it is attached to a client driver, therefore all references to the driver own data have to be cleared, when the driver is detached. Signed-off-by:
-
Guennadi Liakhovetski authored
The soc_camera_power_set() function processes two cases: power on anf off. These two cases don't share and common code, and the function is always called with a constant power on / off argument. Splitting this function into two removes a condition check, reduces indentation levels and makes the code look cleaner. Signed-off-by:
-
Guennadi Liakhovetski authored
We do not have to scan the list of subdevices to find our client - the sensor, the host has already set our grp_id value. Signed-off-by:
-
Guennadi Liakhovetski authored
It is a task of the host / bridge driver to bind single subdevices into a pipeline, not of respective subdevices. Eventually this might be handled by the Media Controller API. Signed-off-by:
-
Guennadi Liakhovetski authored
This patch adds two new ioctl() handlers: .vidioc_create_bufs() and .vidioc_prepare_buf() for compliant vb2 soc-camera hosts. Signed-off-by:
-
Guennadi Liakhovetski authored
Prepare the mx3_camera friver to support the new VIDIOC_CREATE_BUFS and VIDIOC_PREPARE_BUF ioctl()s. The .queue_setup() vb2 operation must be able to handle buffer sizes, provided by the caller, and the .buf_prepare() operation must not use the currently configured frame format for its operation, which makes it superfluous for this driver. Its functionality is moved into .buf_queue(). Signed-off-by:
-
Guennadi Liakhovetski authored
Prepare the sh_mobile_ceu_camera friver to support the new VIDIOC_CREATE_BUFS and VIDIOC_PREPARE_BUF ioctl()s. The .queue_setup() vb2 operation must be able to handle buffer sizes, provided by the caller, and the .buf_prepare() operation must not use the currently configured frame format for its operation. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
And since this is the last and only host driver that uses controls, also remove the now obsolete control fields from soc_camera.h. Signed-off-by:
-
Hans Verkuil authored
The soc_camera framework is switched over to use the control framework. After this patch none of the controls in subdevs or host drivers are available, until those drivers are also converted to the control framework. Signed-off-by:
-
Guennadi Liakhovetski authored
To support multi-size buffers in the mx3_camera V4L2 driver we have to be able to stop DMA on a channel without releasing descriptors and completely halting the hardware. Use the DMA_PAUSE control to implement this mode. Signed-off-by:
Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by:
-
Guennadi Liakhovetski authored
The two recently added ioctl()s VIDIOC_CREATE_BUFS and VIDIOC_PREPARE_BUF allow user-space applications to allocate video buffers of different sizes and hand them over to the driver for fast switching between different frame formats. This patch adds support for buffers of different sizes on the same buffer-queue to vb2. Signed-off-by:
-
Guennadi Liakhovetski authored
In preparation for the forthcoming VIDIOC_CREATE_BUFS ioctl add a "const struct v4l2_format *" argument to the .queue_setup() vb2 operation. Signed-off-by:
-
Guennadi Liakhovetski authored
[mchehab@redhat.com: remove emacs format crap at the end of the new files] Signed-off-by:
-
Guennadi Liakhovetski authored
V4L2 specification states, that the videobuffer state flags have to be updated on VIDIOC_QBUF ioctl(). Videobuf2 currently doesn't do that, which is fixed by this patch. Signed-off-by:
-
Guennadi Liakhovetski authored
A possibility to preallocate and initialise buffers of different sizes in V4L2 is required for an efficient implementation of a snapshot mode. This patch adds two new ioctl()s: VIDIOC_CREATE_BUFS and VIDIOC_PREPARE_BUF and defines respective data structures. Signed-off-by:
-
Guennadi Liakhovetski authored
This patch prepares for a better separation of the buffer preparation stage. Signed-off-by:
-
Guennadi Liakhovetski authored
Consistently check for platform data != NULL before dereferencing. Signed-off-by:
-
Guennadi Liakhovetski authored
The current sh_mobile_ceu_camera driver can cause an Oops, if a CSI2 and a parallel camera are registered on the same CEU. Fix it by making CSI2 association with a camera more targeted. Signed-off-by:
-
Guennadi Liakhovetski authored
G_CROP, S_CROP, CROPCAP, G_FMT, and S_FMT functionality in the mt9t112 driver was broken on many occasions. This patch allows consistent cropping for rectangles also larger than VGA and cleans up multiple other issues in this area. It still doesn't add support for proper scaling, using the sensor own scaler, so input window is still always equal to the output frame. Signed-off-by:
-
Guennadi Liakhovetski authored
soc-camera has been completely ported over to V4L2 subdevice mbus-config operations, soc-camera client bus-param operations and supporting code can now be removed. Signed-off-by:
-
Guennadi Liakhovetski authored
Now that all soc-camera hosts have been ported to use V4L2 subdevice mediabus-config operations and soc-camera client bus-parameter operations have been made optional, they can be removed. Signed-off-by:
-
Guennadi Liakhovetski authored
Now that all soc-camera hosts have been ported to use V4L2 subdevice mediabus-config operations and soc-camera client bus-parameter operations have been made optional, they can be removed. Signed-off-by:
-
Guennadi Liakhovetski authored
The sh_mobile_ceu_camera driver has been converted to use the V4L2 subdevice .[gs]_mbus_config() operations, therefore we don't need SOCAM_* flags for the soc_camera_platform driver anymore. Remove them. Signed-off-by:
Magnus Damm <damm@opensource.se> Signed-off-by:
-
Guennadi Liakhovetski authored
Now that all soc-camera hosts have been ported to use V4L2 subdevice mediabus-config operations and soc-camera client bus-parameter operations have been made optional, they can be removed. Signed-off-by:
-
