- 23 Oct, 2015 17 commits
-
-
Jean Sacren authored
The commit 3092e5e4cc79 ("i40e: add little endian conversion for checksum") fixed the checksum bug on big-endian architecture. But we should not execute cpu_to_le16() unconditionally. Thus, put cpu_to_le16() under certain condition. Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by:Jean Sacren <sakiwit@gmail.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jean Sacren authored
In both i40e_calc_nvm_checksum() and i40e_update_nvm_checksum(), the local variables designated by 'ret_code' are overwritten immediately. As such, they should merely be declared. Signed-off-by:
-
Jean Sacren authored
In i40evf_msix_aq(), the first two lines of rd32() are mainly to clear the registers. If we initialize 'val' at this point, it will be overwritten immediately. We shall simply discard the return value here. When we initialize 'val', we might as well include the mask in one step. Signed-off-by:
-
Jean Sacren authored
The following kernel-doc arguments for their respective functions are missing: 1) @cd_type_cmd_tso_mss for i40e_tso(); 2) @cd_type_cmd_tso_mss for i40e_tsyn(); 3) @tx_ring for i40e_tx_enable_csum(). Add them all for the kernel-doc requirement. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Jean Sacren authored
@flush has been missing since the inception of i40evf_irq_enable(). Add it for the kernel doc. Signed-off-by:
-
Andy Shevchenko authored
Instead of using a custom approach change the code to use %*ph format specifier. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by:
-
Catherine Sullivan authored
Bump up the version... Change-ID: Ib8d501021671ba20250115ed54330e2c182255b7 Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
-
Akeem G Abodunrin authored
If a call to enable SR-IOV in the kernel failed, we need to disable I40E_FLAG_VEB_MODE_ENABLED, so that bridge mode could fall back to VEPA, which is a default. Change-ID: I12b6f776769506db85b29bea94b9c88d0b5ee65e Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by:
-
Carolyn Wyborny authored
This patch fixes a problem where the driver output of the OEM version string varied from the other tools. The mask value and the order of operations were incorrect, per the original change request. Without this patch, the version string will appear incorrect from the driver. Change-ID: Ie1ca6485284b4ce3b57e5a99b18b7641617c7ef7 Signed-off-by:
Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by:
-
Helin Zhang authored
This patch fixes a problem of possibly getting inconsistent flow control statuses after a PF reset. Requested_mode was being set with a default value during probing, but the initial HW state could be different from this mode. Change-ID: I772bf07b78616e87086418d4bd87954b66fa17cd Signed-off-by:
Helin Zhang <helin.zhang@intel.com> Tested-by:
-
Mitch Williams authored
Not sure how this compiles at all. Use the correct struct for manipulating the VLAN filter list. Without this, the VLAN filter list doesn't get processed correctly, and VLAN filters will not be re-enabled after any kind of reset. Change-ID: Iceff2dc089f303058fb71ecb08419eed471e0e90 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Akeem G Abodunrin authored
Fix i40e_is_vsi_uplink_mode_veb to check if bridge is actually in VEB mode before allowing LB in the add VSI routine, instead of unconditionally returning VEB bridge mode. Change-ID: I162397b1bdd02367735fe9baaeb51465be2a3ce9 Signed-off-by:
-
Anjali Singhai Jain authored
The new code flow requires us to grab the filter list lock before adding/deleting the filter. Change-ID: I4eaef508ab4da2d1b2e23f20f2a78d931d5b6aeb Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
-
Anjali Singhai Jain authored
This patch adds a workaround to drop any flow control frames from being transmitted from any VSI. FW can still send flow control frames if flow control is enabled. With this patch in place a malicious VF cannot send flow control or PFC packets out on the wire. Change-ID: I4303b24e98b93066d2767fec24dfe78be591c277 Signed-off-by:
-
Paolo Abeni authored
Currently adding a new ipv4 address always cause the creation of the related network route, with default metric. When a host has multiple interfaces on the same network, multiple routes with the same metric are created. If the userspace wants to set specific metric on each routes, i.e. giving better metric to ethernet links in respect to Wi-Fi ones, the network routes must be deleted and recreated, which is error-prone. This patch implements the support for IFA_F_NOPREFIXROUTE for ipv4 address. When an address is added with such flag set, no associated network route is created, no network route is deleted when said IP is gone and it's up to the user space manage such route. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Broadcom ethernet driver for the new family of NetXtreme-C/E ethernet devices. v5: - Removed empty blank lines at end of files (noted by David Miller). - Moved busy poll helper functions to bnxt.h to at least make the .c file look less cluttered with #ifdef (noted by Stephen Hemminger). v4: - Broke up 2 long message strings with "\n" (suggested by John Linville) - Constify an array of strings (suggested by Stephen Hemminger) - Improve bnxt_vf_pciid() (suggested by Stephen Hemminger) - Use PCI_VDEVICE() to populate pci_device_id table for more compact source. v3: - Fixed 2 more sparse warnings. - Removed some unused structures in .h files. v2: - Fixed all kbuild test robot reported warnings. - Fixed many of the checkpatch.pl errors and warnings. - Fixed the Kconfig description (noted by Dmitry Kravkov). Acked-by:Eddie Wai <eddie.wai@broadcom.com> Acked-by:
Jeffrey Huang <huangjw@broadcom.com> Signed-off-by:
Prashant Sreedharan <prashant@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Vivien Didelot authored
It is preferable to have a common debugfs interface for DSA or switchdev instead of a driver specific one. Thus remove the mv88e6xxx debug code. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
- 22 Oct, 2015 23 commits
-
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: implement port_fdb_dump in drivers Not all switch chips provide a Get Next kind of operation to dump FDB entries. It is preferred to let the driver handle the dump operation the way it works best for the chip. Thus, drop port_fdb_getnext and implement the port_fdb_dump operation in DSA, which pushes the switchdev FDB dump callback down to the drivers. mv88e6xxx is the only driver affected and is updated accordingly. v3 -> v4: fix rejects on latest net-next v2 -> v3: opencode switchdev_obj_dump_cb_t to avoid multiple typedef; use ether_addr_copy in fdb_dump v1 -> v2: fix a few "return err" instead of "goto unlock" in mv88e6xxx.c ==================== Signed-off-by: -
Vivien Didelot authored
No driver implements port_fdb_getnext anymore, and port_fdb_dump is preferred anyway, so remove this function from DSA. Signed-off-by:
-
Vivien Didelot authored
Now that port_fdb_dump is implemented and even simpler, get rid of port_fdb_getnext. Signed-off-by:
-
Vivien Didelot authored
Implement the port_fdb_dump DSA operation. Signed-off-by:
-
Vivien Didelot authored
There is no need to write the MAC address before every Get Next operation, since ATU MAC registers are not cleared between calls. Move the _mv88e6xxx_atu_mac_write call outside of _mv88e6xxx_atu_getnext so future code could call ATU Get Next multiple times and save a few register access. Signed-off-by: -
Vivien Didelot authored
There is no need to write the VLAN ID before every Get Next operation, since the VTU VID register is not cleared between calls. Move the VID write call in a _mv88e6xxx_vtu_vid_write function outside of _mv88e6xxx_vtu_getnext so future code could call VTU Get Next multiple times and save a few register accesses. Signed-off-by:
-
Vivien Didelot authored
Not all switch chips support a Get Next operation to iterate on its FDB. So add a more simple port_fdb_dump function for them. Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2015-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Here's another set of patches for the current cycle: * I merged net-next back to avoid a conflict with the * cfg80211 scheduled scan API extensions * preparations for better scan result timestamping * regulatory cleanups * mac80211 statistics cleanups * a few other small cleanups and fixes ==================== Signed-off-by:
-
yankejian authored
the global Soc configuration is treated by syscon, and sub ctrl bus is Soc bus. it has to be treated by syscon. Signed-off-by:
yankejian <yankejian@huawei.com> Signed-off-by:
lisheng <lisheng011@huawei.com> Signed-off-by:
lipeng <lipeng321@huawei.com> Signed-off-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== Trivial fixes for cxgb4 driver This patch series updates driver description for next gen. adapters, updates firmware info., returns error for setup_rss error case, restores L1 configuration in case of FW rejects new config, updates and aligns ethtool get stats settings, etc This patch series has been created against net-next tree and includes patches on cxgb4 and cxgb4vf driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: -
Hariprasad Shenai authored
Update ethtool get_drvinfo to display regdump len and also update firmware string version print to display N/A in case FW isn't present Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
In the ethtool set_settings() routine we need to remember our old L1 Configuration in case the firmware rejects the request and then restore that. Signed-off-by:
-
Hariprasad Shenai authored
For {1, 10, 40} Gb/s. Prohibiting turning off autonegotiation isn't anywhere in the standard. Signed-off-by: -
Hariprasad Shenai authored
Align the ethtool get stats settings with the rest so it looks uniform Signed-off-by:
-
Pravin B Shelar authored
With use of lwtunnel, we can directly call dev_queue_xmit() rather than calling netdev vport send operation. Following change make tunnel vport code bit cleaner. Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Acked-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Pravin B Shelar authored
Patch fixes following sparse warning. net/openvswitch/flow_netlink.c:583:30: warning: incorrect type in assignment (different base types) net/openvswitch/flow_netlink.c:583:30: expected restricted __be16 [usertype] ipv4 net/openvswitch/flow_netlink.c:583:30: got int Fixes: 6b26ba3a ("openvswitch: netlink attributes for IPv6 tunneling") Signed-off-by:
-
David S. Miller authored
Alexei Starovoitov says: ==================== bpf_perf_event_output helper Over the last year there were multiple attempts to let eBPF programs output data into perf events by He Kuang and Wangnan. The last one was: https://lkml.org/lkml/2015/7/20/736 It was almost perfect with exception that all bpf programs would sent data into one global perf_event. This patch set takes different approach by letting user space open independent PERF_COUNT_SW_BPF_OUTPUT events, so that program output won't collide. Wangnan is working on corresponding perf patches. ==================== Signed-off-by:
-
Alexei Starovoitov authored
Performance test and example of bpf_perf_event_output(). kprobe is attached to sys_write() and trivial bpf program streams pid+cookie into userspace via PERF_COUNT_SW_BPF_OUTPUT event. Usage: $ sudo ./bld_x64/samples/bpf/trace_output recv 2968913 events per sec Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Alexei Starovoitov authored
This helper is used to send raw data from eBPF program into special PERF_TYPE_SOFTWARE/PERF_COUNT_SW_BPF_OUTPUT perf_event. User space needs to perf_event_open() it (either for one or all cpus) and store FD into perf_event_array (similar to bpf_perf_event_read() helper) before eBPF program can send data into it. Today the programs triggered by kprobe collect the data and either store it into the maps or print it via bpf_trace_printk() where latter is the debug facility and not suitable to stream the data. This new helper replaces such bpf_trace_printk() usage and allows programs to have dedicated channel into user space for post-processing of the raw data collected. Signed-off-by:
-
