- 05 Sep, 2018 3 commits
-
-
Florian Westphal authored
[ Upstream commit 86126b77 ] nlmsg_multicast() always frees the skb, so in case we cannot call it we must do that ourselves. Fixes: 21ee543e ("xfrm: fix race between netns cleanup and state expire notification") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tommi Rantala authored
[ Upstream commit 8cc88773 ] Fix missing dst_release() when local broadcast or multicast traffic is xfrm policy blocked. For IPv4 this results to dst leak: ip_route_output_flow() allocates dst_entry via __ip_route_output_key() and passes it to xfrm_lookup_route(). xfrm_lookup returns ERR_PTR(-EPERM) that is propagated. The dst that was allocated is never released. IPv4 local broadcast testcase: ping -b 192.168.1.255 & sleep 1 ip xfrm policy add src 0.0.0.0/0 dst 192.168.1.255/32 dir out action block IPv4 multicast testcase: ping 224.0.0.1 & sleep 1 ip xfrm policy add src 0.0.0.0/0 dst 224.0.0.1/32 dir out action block For IPv6 the missing dst_release() causes trouble e.g. when used in netns: ip netns add TEST ip netns exec TEST ip link set lo up ip link add dummy0 type dummy ip link set dev dummy0 netns TEST ip netns exec TEST ip addr add fd00::1111 dev dummy0 ip netns exec TEST ip link set dummy0 up ip netns exec TEST ping -6 -c 5 ff02::1%dummy0 & sleep 1 ip netns exec TEST ip xfrm policy add src ::/0 dst ff02::1 dir out action block wait ip netns del TEST After netns deletion we see: [ 258.239097] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 268.279061] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 278.367018] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 288.375259] unregister_netdevice: waiting for lo to become free. Usage count = 2 Fixes: ac37e251 ("xfrm: release dst_orig in case of error in xfrm_lookup()") Signed-off-by:
Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by:
-
Eyal Birger authored
[ Upstream commit d6990976 ] When setting the skb->dst before doing the MTU check, the route PMTU caching and reporting is done on the new dst which is about to be released. Instead, PMTU handling should be done using the original dst. This is aligned with IPv4 VTI. Fixes: ccd740cb ("vti6: Add pmtu handling to vti6_xmit.") Signed-off-by:
Eyal Birger <eyal.birger@gmail.com> Signed-off-by:
-
- 24 Aug, 2018 37 commits
-
-
Greg Kroah-Hartman authored
-
Jann Horn authored
commit a13f085d upstream. This fixes the following issues: - When a buffer size is supplied to reiserfs_listxattr() such that each individual name fits, but the concatenation of all names doesn't fit, reiserfs_listxattr() overflows the supplied buffer. This leads to a kernel heap overflow (verified using KASAN) followed by an out-of-bounds usercopy and is therefore a security bug. - When a buffer size is supplied to reiserfs_listxattr() such that a name doesn't fit, -ERANGE should be returned. But reiserfs instead just truncates the list of names; I have verified that if the only xattr on a file has a longer name than the supplied buffer length, listxattr() incorrectly returns zero. With my patch applied, -ERANGE is returned in both cases and the memory corruption doesn't happen anymore. Credit for making me clean this code up a bit goes to Al Viro, who pointed out that the ->actor calling convention is suboptimal and should be changed. Link: http://lkml.kernel.org/r/20180802151539.5373-1-jannh@google.com Fixes: 48b32a35 ("reiserfs: use generic xattr handlers") Signed-off-by:
Jann Horn <jannh@google.com> Acked-by:
Jeff Mahoney <jeffm@suse.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Esben Haabendal authored
commit bed4ff1e upstream. This fixes a race condition, where the DMAEN bit ends up being set after I2C slave has transmitted a byte following the dummy read. When that happens, an interrupt is generated instead, and no DMA request is generated to kickstart the DMA read, and a timeout happens after DMA_TIMEOUT (1 sec). Fixed by setting the DMAEN bit before the dummy read. Signed-off-by:
Esben Haabendal <eha@deif.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by:
-
Lukas Wunner authored
commit 1204e35b upstream. Commit b440bde7 ("PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device") iterates over the devices on a hotplug port's subordinate bus in pciehp's IRQ handler without acquiring pci_bus_sem. It is thus possible for a user to cause a crash by concurrently manipulating the device list, e.g. by disabling slot power via sysfs on a different CPU or by initiating a remove/rescan via sysfs. This can't be fixed by acquiring pci_bus_sem because it may sleep. The simplest fix is to avoid the list iteration altogether and just check the ignore_hotplug flag on the port itself. This works because pci_ignore_hotplug() sets the flag both on the device as well as on its parent bridge. We do lose the ability to print the name of the device blocking hotplug in the debug message, but that's probably bearable. Fixes: b440bde7 ("PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Lukas Wunner authored
commit 281e878e upstream. When pciehp is unbound (e.g. on unplug of a Thunderbolt device), the hotplug_slot struct is deregistered and thus freed before freeing the IRQ. The IRQ handler and the work items it schedules print the slot name referenced from the freed structure in various informational and debug log messages, each time resulting in a quadruple dereference of freed pointers (hotplug_slot -> pci_slot -> kobject -> name). At best the slot name is logged as "(null)", at worst kernel memory is exposed in logs or the driver crashes: pciehp 0000:10:00.0:pcie204: Slot((null)): Card not present An attacker may provoke the bug by unplugging multiple devices on a Thunderbolt daisy chain at once. Unplugging can also be simulated by powering down slots via sysfs. The bug is particularly easy to trigger in poll mode. It has been present since the driver's introduction in 2004: https://git.kernel.org/tglx/history/c/c16b4b14d980 Fix by rearranging teardown such that the IRQ is freed first. Run the work items queued by the IRQ handler to completion before freeing the hotplug_slot struct by draining the work queue from the ->release_slot callback which is invoked by pci_hp_deregister(). Signed-off-by:
-
Myron Stowe authored
commit 3dbe97ef upstream. PCIe r4.0, sec 9.3.5.4, "Device Control Register", shows both Max_Payload_Size (MPS) and Max_Read_request_Size (MRRS) to be 'RsvdP' for VFs. Just prior to the table it states: "PF and VF functionality is defined in Section 7.5.3.4 except where noted in Table 9-16. For VF fields marked 'RsvdP', the PF setting applies to the VF." All of which implies that with respect to Max_Payload_Size Supported (MPSS), MPS, and MRRS values, we should not be paying any attention to the VF's fields, but rather only to the PF's. Only looking at the PF's fields also logically makes sense as it's the sole physical interface to the PCIe bus. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200527 Fixes: 27d868b5 ("PCI: Set MPS to match upstream bridge") Signed-off-by:
Myron Stowe <myron.stowe@redhat.com> Signed-off-by:
-
Lukas Wunner authored
commit 4ce64358 upstream. If addition of sysfs files fails on registration of a hotplug slot, the struct pci_slot as well as the entry in the slot_list is leaked. The issue has been present since the hotplug core was introduced in 2002: https://git.kernel.org/tglx/history/c/a8a2069f432c Perhaps the idea was that even though sysfs addition fails, the slot should still be usable. But that's not how drivers use the interface, they abort probe if a non-zero value is returned. Signed-off-by:
-
John David Anglin authored
commit 3b885ac1 upstream. Now that mb() is an instruction barrier, it will slow performance if we issue unnecessary barriers. The spinlock defines have a number of unnecessary barriers. The __ldcw() define is both a hardware and compiler barrier. The mb() barriers in the routines using __ldcw() serve no purpose. The only barrier needed is the one in arch_spin_unlock(). We need to ensure all accesses are complete prior to releasing the lock. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.0+ Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Willem de Bruijn authored
commit 4576cd46 upstream. TPACKET_V3 stores variable length frames in fixed length blocks. Blocks must be able to store a block header, optional private space and at least one minimum sized frame. Frames, even for a zero snaplen packet, store metadata headers and optional reserved space. In the block size bounds check, ensure that the frame of the chosen configuration fits. This includes sockaddr_ll and optional tp_reserve. Syzbot was able to construct a ring with insuffient room for the sockaddr_ll in the header of a zero-length frame, triggering an out-of-bounds write in dev_parse_header. Convert the comparison to less than, as zero is a valid snap len. This matches the test for minimum tp_frame_size immediately below. Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.") Fixes: eb73190f ("net/packet: refine check for priv area size") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Florian Westphal authored
commit 6613b617 upstream. When first DCCP packet is SYNC or SYNCACK, we insert a new conntrack that has an un-initialized timeout value, i.e. such entry could be reaped at any time. Mark them as INVALID and only ignore SYNC/SYNCACK when connection had an old state. Reported-by: syzbot+6f18401420df260e37ed@syzkaller.appspotmail.com Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Eric Dumazet authored
commit 45c180bc upstream. struct xfrm_userpolicy_type has two holes, so we should not use C99 style initializer. KMSAN report: BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:140 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x1b14/0x2800 lib/iov_iter.c:571 CPU: 1 PID: 4520 Comm: syz-executor841 Not tainted 4.17.0+ #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:113 kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1117 kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1211 kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1253 copyout lib/iov_iter.c:140 [inline] _copy_to_iter+0x1b14/0x2800 lib/iov_iter.c:571 copy_to_iter include/linux/uio.h:106 [inline] skb_copy_datagram_iter+0x422/0xfa0 net/core/datagram.c:431 skb_copy_datagram_msg include/linux/skbuff.h:3268 [inline] netlink_recvmsg+0x6f1/0x1900 net/netlink/af_netlink.c:1959 sock_recvmsg_nosec net/socket.c:802 [inline] sock_recvmsg+0x1d6/0x230 net/socket.c:809 ___sys_recvmsg+0x3fe/0x810 net/socket.c:2279 __sys_recvmmsg+0x58e/0xe30 net/socket.c:2391 do_sys_recvmmsg+0x2a6/0x3e0 net/socket.c:2472 __do_sys_recvmmsg net/socket.c:2485 [inline] __se_sys_recvmmsg net/socket.c:2481 [inline] __x64_sys_recvmmsg+0x15d/0x1c0 net/socket.c:2481 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x446ce9 RSP: 002b:00007fc307918db8 EFLAGS: 00000293 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00000000006dbc24 RCX: 0000000000446ce9 RDX: 000000000000000a RSI: 0000000020005040 RDI: 0000000000000003 RBP: 00000000006dbc20 R08: 0000000020004e40 R09: 0000000000000000 R10: 0000000040000000 R11: 0000000000000293 R12: 0000000000000000 R13: 00007ffc8d2df32f R14: 00007fc3079199c0 R15: 0000000000000001 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline] kmsan_save_stack mm/kmsan/kmsan.c:294 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685 kmsan_memcpy_origins+0x11d/0x170 mm/kmsan/kmsan.c:527 __msan_memcpy+0x109/0x160 mm/kmsan/kmsan_instr.c:413 __nla_put lib/nlattr.c:569 [inline] nla_put+0x276/0x340 lib/nlattr.c:627 copy_to_user_policy_type net/xfrm/xfrm_user.c:1678 [inline] dump_one_policy+0xbe1/0x1090 net/xfrm/xfrm_user.c:1708 xfrm_policy_walk+0x45a/0xd00 net/xfrm/xfrm_policy.c:1013 xfrm_dump_policy+0x1c0/0x2a0 net/xfrm/xfrm_user.c:1749 netlink_dump+0x9b5/0x1550 net/netlink/af_netlink.c:2226 __netlink_dump_start+0x1131/0x1270 net/netlink/af_netlink.c:2323 netlink_dump_start include/linux/netlink.h:214 [inline] xfrm_user_rcv_msg+0x8a3/0x9b0 net/xfrm/xfrm_user.c:2577 netlink_rcv_skb+0x37e/0x600 net/netlink/af_netlink.c:2448 xfrm_netlink_rcv+0xb2/0xf0 net/xfrm/xfrm_user.c:2598 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1680/0x1750 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec8/0x1320 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Local variable description: ----upt.i@dump_one_policy Variable was created at: dump_one_policy+0x78/0x1090 net/xfrm/xfrm_user.c:1689 xfrm_policy_walk+0x45a/0xd00 net/xfrm/xfrm_policy.c:1013 Byte 130 of 137 is uninitialized Memory access starts at ffff88019550407f Fixes: c0144bea ("[XFRM] netlink: Use nla_put()/NLA_PUT() variantes") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
-
John David Anglin authored
commit 7797167f upstream. Now that we use a sync prior to releasing the locks in syscall.S, we don't need the PA 2.0 ordered stores used to release some locks. Using an ordered store, potentially slows the release and subsequent code. There are a number of other ordered stores and loads that serve no purpose. I have converted these to normal stores. Signed-off-by:
-
Jeremy Cline authored
commit 1a5d5e5d upstream. 'ac->ac_g_ex.fe_len' is a user-controlled value which is used in the derivation of 'ac->ac_2order'. 'ac->ac_2order', in turn, is used to index arrays which makes it a potential spectre gadget. Fix this by sanitizing the value assigned to 'ac->ac2_order'. This covers the following accesses found with the help of smatch: * fs/ext4/mballoc.c:1896 ext4_mb_simple_scan_group() warn: potential spectre issue 'grp->bb_counters' [w] (local cap) * fs/ext4/mballoc.c:445 mb_find_buddy() warn: potential spectre issue 'EXT4_SB(e4b->bd_sb)->s_mb_offsets' [r] (local cap) * fs/ext4/mballoc.c:446 mb_find_buddy() warn: potential spectre issue 'EXT4_SB(e4b->bd_sb)->s_mb_maxs' [r] (local cap) Suggested-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Jeremy Cline <jcline@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Bonzini authored
commit 9432a317 upstream. A comment warning against this bug is there, but the code is not doing what the comment says. Therefore it is possible that an EPOLLHUP races against irq_bypass_register_consumer. The EPOLLHUP handler schedules irqfd_shutdown, and if that runs soon enough, you get a use-after-free. Reported-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit e56b8ce3 ] Attempt to make cryptic TCP seq number error messages clearer by (1) identifying the source of the message as "TCP", (2) identifying the errors as "seq # bug", and (3) grouping the field identifiers and values by separating them with commas. E.g., the following message is changed from: recvmsg bug 2: copied 73BCB6CD seq 70F17CBE rcvnxt 73BCB9AA fl 0 WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:1881 tcp_recvmsg+0x649/0xb90 to: TCP recvmsg seq # bug 2: copied 73BCB6CD, seq 70F17CBE, rcvnxt 73BCB9AA, fl 0 WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:2011 tcp_recvmsg+0x694/0xba0 Suggested-by:
積丹尼 Dan Jacobson <jidanni@jidanni.org> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 50973993 ] In cases the probing fails the log level of the messages should be an error. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 711c62df ] In case the SPI thread is not running, a simple reset of sync state won't fix the transmit timeout. We also need to wake up the kernel thread. Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit b2bab426 ] As long as the synchronization with the QCA7000 isn't finished, we cannot accept packets from the upper layers. So let the SPI thread enable the TX queue after sync and avoid unwanted packet drop. Signed-off-by:
-
Sergei Shtylyov authored
[ Upstream commit 0018b265 ] When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The Versatile PCI controller driver has the same issue. Replace pci_remap_iospace() with the devm_ managed version to fix the bug. Fixes: b7e78170 ("PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Sergei Shtylyov authored
commit a5fb9fb0 upstream. When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. Introduce the devm_pci_remap_iospace() managed API and replace the pci_remap_iospace() call with it to fix the bug. Fixes: dbf9826d ("PCI: generic: Convert to DT resource parsing API") Signed-off-by:
-
David Lechner authored
[ Upstream commit 3a9b0455 ] This driver can spam the kernel log with multiple messages of: net eth0: eth0: allmulti set Usually 4 or 8 at a time (probably because of using ConnMan). This message doesn't seem useful, so let's demote it from dev_info() to dev_dbg(). Signed-off-by:
David Lechner <david@lechnology.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit c1334597 ] CC [M] drivers/net/ethernet/freescale/fman/fman.o In file included from ../drivers/net/ethernet/freescale/fman/fman.c:35: ../include/linux/fsl/guts.h: In function 'guts_set_dmacr': ../include/linux/fsl/guts.h:165:2: error: implicit declaration of function 'clrsetbits_be32' [-Werror=implicit-function-declaration] clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift); ^~~~~~~~~~~~~~~ Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 7f073d01 ] The bo array has req->nr_buffers elements so the > should be >= so we don't read beyond the end of the array. Fixes: a1606a95 ("drm/nouveau: new gem pushbuf interface, bump to 0.0.16") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit c29e9da5 ] platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap_nocache(e1, res->start, e2); Fixes: cc4fa83f ("pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Ray Jui <ray.jui@broadcom.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit f90a21c8 ] The > comparisons should be >= or else we read beyond the end of the pinctrl->functions[] array. Fixes: cc4fa83f ("pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC") Signed-off-by:
-
Yuchung Cheng authored
[ Upstream commit a69258f7 ] After fixing the way DCTCP tracking delayed ACKs, the delayed-ACK related callbacks are no longer needed Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Lawrence Brakmo <brakmo@fb.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 5fc853cc ] We accidentally left out the error handling for kstrtoul(). Fixes: a520030e ("qlcnic: Implement flash sysfs callback for 83xx adapter") Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 993675a3 ] If variable length link layer headers result in a packet shorter than dev->hard_header_len, reset the network header offset. Else skb->mac_len may exceed skb->len after skb_mac_reset_len. packet_sendmsg_spkt already has similar logic. Fixes: b84bbaf7 ("packet: in packet_snd start writing at link layer allocation") Signed-off-by:
-
Laura Abbott authored
[ Upstream commit 8b247a92 ] The final link of fixdep uses LDFLAGS but not the existing HOSTLDFLAGS. Fix this. Signed-off-by:
Laura Abbott <labbott@redhat.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Alexander Duyck authored
[ Upstream commit d14c780c ] This change makes it so that we are much more explicit about the ordering of updates to the receive address register (RAR) table. Prior to this patch I believe we may have been updating the table while entries were still active, or possibly allowing for reordering of things since we weren't explicitly flushing writes to either the lower or upper portion of the register prior to accessing the other half. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by:
Shannon Nelson <shannon.nelson@oracle.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Adam Ford authored
[ Upstream commit 92384741 ] The AM3517 has a different OTG controller location than the OMAP3, which is included from omap3.dtsi. This results in a hwmod error. Since the AM3517 has a different OTG controller address, this patch disabes one that is isn't available. Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Nishanth Menon authored
[ Upstream commit 2f8b5b21 ] Call secure services to enable ACTLR[0] (Enable invalidates of BTB with ICIALLU) when branch hardening is enabled for kernel. On GP devices OMAP5/DRA7, there is no possibility to update secure side since "secure world" is ROM and there are no override mechanisms possible. On HS devices, appropriate PPA should do the workarounds as well. However, the configuration is only done for secondary core, since it is expected that firmware/bootloader will have enabled the required configuration for the primary boot core (note: bootloaders typically will NOT enable secondary processors, since it has no need to do so). Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
[ Upstream commit b4c7e2bd ] Dynamic ftrace requires modifying the code segments that are usually set to read-only. To do this, a per arch function is called both before and after the ftrace modifications are performed. The "before" function will set kernel code text to read-write to allow for ftrace to make the modifications, and the "after" function will set the kernel code text back to "read-only" to keep the kernel code text protected. The issue happens when dynamic ftrace is tested at boot up. The test is done before the kernel code text has been set to read-only. But the "before" and "after" calls are still performed. The "after" call will change the kernel code text to read-only prematurely, and other boot code that expects this code to be read-write will fail. The solution is to add a variable that is set when the kernel code text is expected to be converted to read-only, and make the ftrace "before" and "after" calls do nothing if that variable is not yet set. This is similar to the x86 solution from commit 16239630 ("ftrace, x86: make kernel text writable only for conversions"). Link: http://lkml.kernel.org/r/20180620212906.24b7b66e@vmware.local.homeReported-by:
Stefan Agner <stefan@agner.ch> Tested-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Kamal Heib authored
[ Upstream commit d63c4673 ] Fix memory leak in the error path of mlx5_ib_create_srq() by making sure to free the allocated srq. Fixes: c2b37f76 ("IB/mlx5: Fix integer overflows in mlx5_ib_create_srq") Signed-off-by:
Kamal Heib <kamalheib1@gmail.com> Acked-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Dave Jiang authored
[ Upstream commit ee6581ce ] Incremental patch to fix the unchecked dereference in acpi_nfit_ctl. Reported by Dan Carpenter: "acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value" from Jun 28, 2018, leads to the following Smatch complaint: drivers/acpi/nfit/core.c:578 acpi_nfit_ctl() warn: variable dereferenced before check 'cmd_rc' (see line 411) drivers/acpi/nfit/core.c 410 411 *cmd_rc = -EINVAL; ^^^^^^^^^^^^^^^^^^ Patch adds unchecked dereference. Fixes: c1985cef ("acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value") Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
-
Kim Phillips authored
[ Upstream commit f6432b9f ] Like system(), popen() calls /bin/sh, which may/may not be bash. Script when run on dash and encounters the line, yields: exit: Illegal number: -1 checkbashisms report on script content: possible bashism (exit|return with negative status code): exit -1 Remove the bashism and use the more portable non-zero failure status code 1. Signed-off-by:
Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan@linux.vnet.ibm.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20180629124652.8d0af7e2281fd3fd8262cacc@arm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Vikas Gupta authored
[ Upstream commit c58387ab ] Fix bug in the error code path when bnxt_request_irq() returns failure. bnxt_disable_napi() should not be called in this error path because NAPI has not been enabled yet. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
