Idea is from Patrick McHardy.

Instead of managing the list of qdiscs on the device level, manage it
in the root qdisc of a netdev_queue.  This solves all kinds of
visibility issues during qdisc destruction.

The way to iterate over all qdiscs of a netdev_queue is to visit
the netdev_queue->qdisc, and then traverse it's list.

The only special case is to ignore builting qdiscs at the root when
dumping or doing a qdisc_lookup().  That was not needed previously
because builtin qdiscs were not added to the device's qdisc_list.
Signed-off-by: David S. Miller <davem@davemloft.net>

The u32_list is just an indirect way of maintaining a reference
to a U32 node on a per-qdisc basis.

Just add an explicit node pointer for u32 to struct Qdisc an do
away with this global list.
Signed-off-by: David S. Miller <davem@davemloft.net>

Add new sockopt to reserve some headroom in the mmaped ring frames in
front of the packet payload. This can be used f.i. when the VLAN header
needs to be (re)constructed to avoid moving the entire payload.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch will fix the following sparse warnings:

/home/benli/sparse/bnx2.c:297:8: warning: symbol 'val' shadows an earlier one
/home/benli/sparse/bnx2.c:286:60: originally declared here
/home/benli/sparse/bnx2.c:7461:7: warning: symbol 'i' shadows an earlier one
/home/benli/sparse/bnx2.c:7265:10: originally declared here
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change allows the first TX ring (CID 16) and the first TSS TX ring
(CID 32) to be used concurrently.  Before this change, we could get TSO
errors when both TX rings were used concurrently.
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With the recent changes to tx mutiqueue, e1000 was not calling
netif_start_queue() before calling netif_wake_queue().
This causes an oops during loading of the driver.

(Based on commit d55b53ff
("igb/ixgbe/e1000e: resolve tx multiqueue bug").)
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With the recent changes to tx mutiqueue, igb/ixgbe/e1000e was not calling
netif_tx_start_all_queues() before calling netif_tx_wake_all_queues().
This causes an issue during loading of the driver.

In addition, updated e1000e to use the updated tx mutliqueue api.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

They are symmetrical to single_open ones :)
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are already 7 of them - time to kill some duplicate code.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

After all this stuff is moved outside, this function can look better.

Besides, I tuned the error path in ip_proc_init_net to make it have
only 2 exit points, not 3.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This one has become per-net long ago, but the appropriate file
is per-net only now.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

All the statistics shown in this file have been made per-net already.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now all the shown in it statistics is netnsizated, time to
show it in appropriate net.

The appropriate net init/exit ops already exist - they make
the sockstat file per net - so just extend them.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

After moving all the stuff outside this function it looks
a bit ugly - make it look better.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to... ouch, I repeat myself.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to ip and tcp ones :)
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to tcp one.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Proc temporary uses stats from init_net.

BTW, TCP_XXX_STATS are beautiful (w/o do { } while (0) facing) again :)
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

These ones are currently empty, but stuff from init_ipv4_mibs will
sequentially migrate there.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The only structure declared within is the netns_mib, which will
carry all our mibs within. I didn't put the mibs in the existing
netns_xxx structures to make it possible to mark this one as
properly aligned and get in a separate "read-mostly" cache-line.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 94d98424.

Alan says it's not appropriate to remove this driver,
Adrian Bunk also agrees with this revert.
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:

	Documentation/powerpc/booting-without-of.txt
	drivers/atm/Makefile
	drivers/net/fs_enet/fs_enet-main.c
	drivers/pci/pci-acpi.c
	net/8021q/vlan.c
	net/iucv/iucv.c

Instead of 'pfifo_fast' we have just plain 'fifo_fast'.
No priority queues, just a straight FIFO.

This is necessary in order to legally have a seperate
qdisc per queue in multi-TX-queue setups, and thus get
full parallelization.
Signed-off-by: David S. Miller <davem@davemloft.net>

We have to have exclusive access to the given qdisc anyways, so
doing even more locking is superfluous.
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the destruction of the old queue into qdisc_graft().

When operating on a root qdisc (ie. "parent == NULL"), apply
the operation to all queues.  The caller has grabbed a single
implicit reference for this graft, therefore when we apply the
change to more than one queue we must grab additional qdisc
references.

Otherwise, we are operating on a class of a specific parent qdisc, and
therefore no multiqueue handling is necessary.
Signed-off-by: David S. Miller <davem@davemloft.net>

We can simply use the qdisc->q.lock for all of the
qdisc tree synchronization.
Signed-off-by: David S. Miller <davem@davemloft.net>

No longer used.
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sch_tree_lock() lock the qdisc's root.  All of the
users hold the RTNL semaphore and the root qdisc is not
changing.

Implement tbf_tree_{lock,unlock}() simply in terms of
sch_tree_{lock,unlock}().
Signed-off-by: David S. Miller <davem@davemloft.net>

Lock the root of the qdisc being operated upon.

All explicit references to qdisc_tree_lock() are now gone.
The only remaining uses are via the sch_tree_{lock,unlock}()
and tcf_tree_{lock,unlock}() macros.
Signed-off-by: David S. Miller <davem@davemloft.net>

And give it it's own lock.
Signed-off-by: David S. Miller <davem@davemloft.net>

It just wants the qdisc tree to be synchronized, so grabbing
qdisc_root_lock() is sufficient.
Signed-off-by: David S. Miller <davem@davemloft.net>

It just wants the qdisc tree for the filter to be synchronized.
So just BH lock qdisc_root_lock(q) instead.
Signed-off-by: David S. Miller <davem@davemloft.net>

This eliminates another qdisc_lock_tree user.
Signed-off-by: David S. Miller <davem@davemloft.net>

This allows less strict control of access to the qdisc attached to a
netdev_queue.  It is even allowed to enqueue into a qdisc which is
in the process of being destroyed.  The RCU handler will toss out
those packets.

We will need this to handle sharing of a qdisc amongst multiple
TX queues.  In such a setup the lock has to be shared, so will
be inside of the qdisc itself.  At which point the netdev_queue
lock cannot be used to hard synchronize access to the ->qdisc
pointer.

One operation we have to keep inside of qdisc_destroy() is the list
deletion.  It is the only piece of state visible after the RCU quiesce
period, so we have to undo it early and under the appropriate locking.

The operations in the RCU handler do not need any looking because the
qdisc tree is no longer visible to anything at that point.
Signed-off-by: David S. Miller <davem@davemloft.net>

We are registering the device, there is no way anyone can get
at this object's qdiscs yet in any meaningful way.
Signed-off-by: David S. Miller <davem@davemloft.net>