- 26 Nov, 2012 9 commits
-
-
Jussi Kivilinna authored
commit 9efade1b upstream. cryptd_queue_worker attempts to prevent simultaneous accesses to crypto workqueue by cryptd_enqueue_request using preempt_disable/preempt_enable. However cryptd_enqueue_request might be called from softirq context, so add local_bh_disable/local_bh_enable to prevent data corruption and panics. Bug report at http://marc.info/?l=linux-crypto-vger&m=134858649616319&w=2 v2: - Disable software interrupts instead of hardware interrupts Reported-by:
Gurucharan Shetty <gurucharan.shetty@gmail.com> Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeff Layton authored
commit 36960e44 upstream. The userspace cifs.idmap program generally works with the wbclient libs to generate binary SIDs in userspace. That program defines the struct that holds these values as having a max of 15 subauthorities. The kernel idmapping code however limits that value to 5. When the kernel copies those values around though, it doesn't sanity check the num_subauths value handed back from userspace or from the server. It's possible therefore for userspace to hand us back a bogus num_subauths value (or one that's valid, but greater than 5) that could cause the kernel to walk off the end of the cifs_sid->sub_auths array. Fix this by defining a new routine for copying sids and using that in all of the places that copy it. If we end up with a sid that's longer than expected then this approach will just lop off the "extra" subauths, but that's basically what the code does today already. Better approaches might be to fix this code to reject SIDs with >5 subauths, or fix it to handle the subauths array dynamically. At the same time, change the kernel to check the length of the data returned by userspace. If it's shorter than struct cifs_sid, reject it and return -EIO. If that happens we'll end up with fields that are basically uninitialized. Long term, it might make sense to redefine cifs_sid using a flexarray at the end, to allow for variable-length subauth lists, and teach the code to handle the case where the subauths array being passed in from userspace is shorter than 5 elements. Note too, that I don't consider this a security issue since you'd need a compromised cifs.idmap program. If you have that, you can do all sorts of nefarious stuff. Still, this is probably reasonable for stable. Reviewed-by:
Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
Rusty Russell authored
commit 59ef28b1 upstream. Masaki found and patched a kallsyms issue: the last symbol in a module's symtab wasn't transferred. This is because we manually copy the zero'th entry (which is always empty) then copy the rest in a loop starting at 1, though from src[0]. His fix was minimal, I prefer to rewrite the loops in more standard form. There are two loops: one to get the size, and one to copy. Make these identical: always count entry 0 and any defined symbol in an allocated non-init section. This bug exists since the following commit was introduced. module: reduce symbol table for loaded modules (v2) commit: 4a496226 LKML: http://lkml.org/lkml/2012/10/24/27Reported-by:
Masaki Kimura <masaki.kimura.kz@hitachi.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Eric Paris authored
commit 848561d3 upstream. Anders Blomdell noted in 2010 that Fanotify lost events and provided a test case. Eric Paris confirmed it was a bug and posted a fix to the list https://groups.google.com/forum/?fromgroups=#!topic/linux.kernel/RrJfTfyW2BE but never applied it. Repeated attempts over time to actually get him to apply it have never had a reply from anyone who has raised it So apply it anyway Signed-off-by:
Alan Cox <alan@linux.intel.com> Reported-by:
Anders Blomdell <anders.blomdell@control.lth.se> Cc: Eric Paris <eparis@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Felix Fietkau authored
commit 1f98ab7f upstream. Fixes more wifi status skb leaks, leading to hostapd/wpa_supplicant hangs. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
commit 20f544ee upstream. On resume or firmware recovery, mac80211 sends a null data packet to see if the AP is still around and hasn't disconnected us. However, it always does this even if it wasn't even connected before, leading to a warning in the new channel context code. Fix this by checking that it's associated. Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Arik Nemtsov authored
commit 987c285c upstream. These are accessed without a lock when ending STA PSM. If the sta_cleanup timer accesses these lists at the same time, we might crash. This may fix some mysterious crashes we had during ieee80211_sta_ps_deliver_wakeup. Signed-off-by:
Arik Nemtsov <arik@wizery.com> Signed-off-by:
Ido Yariv <ido@wizery.com> Signed-off-by:
-
Dave Chinner authored
commit d69043c4 upstream. Error handling in xfs_buf_ioapply_map() does not handle IO reference counts correctly. We increment the b_io_remaining count before building the bio, but then fail to decrement it in the failure case. This leads to the buffer never running IO completion and releasing the reference that the IO holds, so at unmount we can leak the buffer. This leak is captured by this assert failure during unmount: XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0, file: fs/xfs/xfs_mount.c, line: 273 This is not a new bug - the b_io_remaining accounting has had this problem for a long, long time - it's just very hard to get a zero length bio being built by this code... Further, the buffer IO error can be overwritten on a multi-segment buffer by subsequent bio completions for partial sections of the buffer. Hence we should only set the buffer error status if the buffer is not already carrying an error status. This ensures that a partial IO error on a multi-segment buffer will not be lost. This part of the problem is a regression, however. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Mark Tinguely <tinguely@sgi.com> Signed-off-by:
Ben Myers <bpm@sgi.com> Signed-off-by:
-
Takamori Yamaguchi authored
commit b0a8cc58 upstream. In kswapd(), set current->reclaim_state to NULL before returning, as current->reclaim_state holds reference to variable on kswapd()'s stack. In rare cases, while returning from kswapd() during memory offlining, __free_slab() and freepages() can access the dangling pointer of current->reclaim_state. Signed-off-by:
Takamori Yamaguchi <takamori.yamaguchi@jp.sony.com> Signed-off-by:
Aaditya Kumar <aaditya.kumar@ap.sony.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
- 17 Nov, 2012 31 commits
-
-
Greg Kroah-Hartman authored
-
Takashi Iwai authored
commit 10e44239 upstream. The recent change for USB-audio disconnection race fixes introduced a mutex deadlock again. There is a circular dependency between chip->shutdown_rwsem and pcm->open_mutex, depicted like below, when a device is opened during the disconnection operation: A. snd_usb_audio_disconnect() -> card.c::register_mutex -> chip->shutdown_rwsem (write) -> snd_card_disconnect() -> pcm.c::register_mutex -> pcm->open_mutex B. snd_pcm_open() -> pcm->open_mutex -> snd_usb_pcm_open() -> chip->shutdown_rwsem (read) Since the chip->shutdown_rwsem protection in the case A is required only for turning on the chip->shutdown flag and it doesn't have to be taken for the whole operation, we can reduce its window in snd_usb_audio_disconnect(). Reported-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 8bb4d9ce upstream. There are uncovered cases whether the card refcount introduced by the commit a0830dbd isn't properly increased or decreased: - OSS PCM and mixer success paths - When lookup function gets NULL This patch fixes these places. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=50251Signed-off-by:
-
Dave Chinner authored
commit 6ce377af upstream. Commit 44396476 ("xfs: reset buffer pointers before freeing them") in 3.0-rc1 introduced a regression when recovering log buffers that wrapped around the end of log. The second part of the log buffer at the start of the physical log was being read into the header buffer rather than the data buffer, and hence recovery was seeing garbage in the data buffer when it got to the region of the log buffer that was incorrectly read. Reported-by:
Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Johan Hovold authored
Fix warning about unused variable introduced by commit e681b66f ("USB: mos7840: remove invalid disconnect handling") upstream. A subsequent fix which removed the disconnect function got rid of the warning but that one was only backported to v3.6. Reported-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Daniel Vetter authored
commit b6e0e543 upstream. Like in the case of native hdmi, which is fixed already in commit adf00b26 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Tue Sep 25 13:23:34 2012 -0300 drm/i915: make sure we write all the DIP data bytes we need to clear the entire sdvo buffer to avoid upsetting the display. Since infoframe buffer writing is now a bit more elaborate, extract it into it's own function. This will be useful if we ever get around to properly update the ELD for sdvo. Also #define proper names for the two buffer indexes with fixed usage. v2: Cite the right commit above, spotted by Paulo Zanoni. v3: I'm too stupid to paste the right commit. v4: Ben Hutchings noticed that I've failed to handle an underflow in my loop logic, breaking it for i >= length + 8. Since I've just lost C programmer license, use his solution. Also, make the frustrated 0-base buffer size a notch more clear. Reported-and-tested-by:
Jürg Billeter <j@bitron.ch> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25732 Cc: Paulo Zanoni <przanoni@gmail.com> Cc: Ben Hutchings <ben@decadent.org.uk> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
commit 81014b9d upstream. At least the worst offenders: - SDVO specifies that the encoder should compute the ecc. Testing also shows that we must not send the ecc field, so copy the dip_infoframe struct to a temporay place and avoid the ecc field. This way the avi infoframe is exactly 17 bytes long, which agrees with what the spec mandates as a minimal storage capacity (with the ecc field it would be 18 bytes). - Only 17 when sending the avi infoframe. The SDVO spec explicitly says that sending more data than what the device announces results in undefined behaviour. - Add __attribute__((packed)) to the avi and spd infoframes, for otherwise they're wrongly aligned. Noticed because the avi infoframe ended up being 18 bytes large instead of 17. We haven't noticed this yet because we don't use the uint16_t fields yet (which are the only ones that would be wrongly aligned). This regression has been introduce by 3c17fe4b is the first bad commit commit 3c17fe4b Author: David Härdeman <david@hardeman.nu> Date: Fri Sep 24 21:44:32 2010 +0200 i915: enable AVI infoframe for intel_hdmi.c [v4] Patch tested on my g33 with a sdvo hdmi adaptor. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25732 Tested-by: Peter Ross <pross@xvid.org> (G35 SDVO-HDMI) Reviewed-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-Off-by:
-
Alex Deucher authored
commit f418b88a upstream. This register is needed for streamout to work properly. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 860fe2f0 upstream. These regs were being wronly rejected leading to rendering issues. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=56876Signed-off-by:
-
Thomas Hellstrom authored
commit afcc87aa upstream. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Reviewed-by:
Dmitry Torokhov <dtor@vmware.com> Cc: linux-graphics-maintainer@vmware.com Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 95e8f6a2 upstream. The device would not reset properly when resuming from hibernation. Signed-off-by:
-
Chris Ball authored
commit 14efd957 upstream. Commit 473b095a ("mmc: sdhci: fix incorrect command used in tuning") introduced a NULL dereference at resume-time if an SD 3.0 host controller raises the SDHCI_NEEDS_TUNING flag while no card is inserted. Seen on an OLPC XO-4 with sdhci-pxav3, but presumably affects other controllers too. Signed-off-by:
Chris Ball <cjb@laptop.org> Signed-off-by:
-
Thomas Gleixner authored
commit 59fa6245 upstream. Siddhesh analyzed a failure in the take over of pi futexes in case the owner died and provided a workaround. See: http://sourceware.org/bugzilla/show_bug.cgi?id=14076 The detailed problem analysis shows: Futex F is initialized with PTHREAD_PRIO_INHERIT and PTHREAD_MUTEX_ROBUST_NP attributes. T1 lock_futex_pi(F); T2 lock_futex_pi(F); --> T2 blocks on the futex and creates pi_state which is associated to T1. T1 exits --> exit_robust_list() runs --> Futex F userspace value TID field is set to 0 and FUTEX_OWNER_DIED bit is set. T3 lock_futex_pi(F); --> Succeeds due to the check for F's userspace TID field == 0 --> Claims ownership of the futex and sets its own TID into the userspace TID field of futex F --> returns to user space T1 --> exit_pi_state_list() --> Transfers pi_state to waiter T2 and wakes T2 via rt_mutex_unlock(&pi_state->mutex) T2 --> acquires pi_state->mutex and gains real ownership of the pi_state --> Claims ownership of the futex and sets its own TID into the userspace TID field of futex F --> returns to user space T3 --> observes inconsistent state This problem is independent of UP/SMP, preemptible/non preemptible kernels, or process shared vs. private. The only difference is that certain configurations are more likely to expose it. So as Siddhesh correctly analyzed the following check in futex_lock_pi_atomic() is the culprit: if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) { We check the userspace value for a TID value of 0 and take over the futex unconditionally if that's true. AFAICT this check is there as it is correct for a different corner case of futexes: the WAITERS bit became stale. Now the proposed change - if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) { + if (unlikely(ownerdied || + !(curval & (FUTEX_TID_MASK | FUTEX_WAITERS)))) { solves the problem, but it's not obvious why and it wreckages the "stale WAITERS bit" case. What happens is, that due to the WAITERS bit being set (T2 is blocked on that futex) it enforces T3 to go through lookup_pi_state(), which in the above case returns an existing pi_state and therefor forces T3 to legitimately fight with T2 over the ownership of the pi_state (via pi_state->mutex). Probelm solved! Though that does not work for the "WAITERS bit is stale" problem because if lookup_pi_state() does not find existing pi_state it returns -ERSCH (due to TID == 0) which causes futex_lock_pi() to return -ESRCH to user space because the OWNER_DIED bit is not set. Now there is a different solution to that problem. Do not look at the user space value at all and enforce a lookup of possibly available pi_state. If pi_state can be found, then the new incoming locker T3 blocks on that pi_state and legitimately races with T2 to acquire the rt_mutex and the pi_state and therefor the proper ownership of the user space futex. lookup_pi_state() has the correct order of checks. It first tries to find a pi_state associated with the user space futex and only if that fails it checks for futex TID value = 0. If no pi_state is available nothing can create new state at that point because this happens with the hash bucket lock held. So the above scenario changes to: T1 lock_futex_pi(F); T2 lock_futex_pi(F); --> T2 blocks on the futex and creates pi_state which is associated to T1. T1 exits --> exit_robust_list() runs --> Futex F userspace value TID field is set to 0 and FUTEX_OWNER_DIED bit is set. T3 lock_futex_pi(F); --> Finds pi_state and blocks on pi_state->rt_mutex T1 --> exit_pi_state_list() --> Transfers pi_state to waiter T2 and wakes it via rt_mutex_unlock(&pi_state->mutex) T2 --> acquires pi_state->mutex and gains ownership of the pi_state --> Claims ownership of the futex and sets its own TID into the userspace TID field of futex F --> returns to user space This covers all gazillion points on which T3 might come in between T1's exit_robust_list() clearing the TID field and T2 fixing it up. It also solves the "WAITERS bit stale" problem by forcing the take over. Another benefit of changing the code this way is that it makes it less dependent on untrusted user space values and therefor minimizes the possible wreckage which might be inflicted. As usual after staring for too long at the futex code my brain hurts so much that I really want to ditch that whole optimization of avoiding the syscall for the non contended case for PI futexes and rip out the maze of corner case handling code. Unfortunately we can't as user space relies on that existing behaviour, but at least thinking about it helps me to preserve my mental sanity. Maybe we should nevertheless :) Reported-and-tested-by:
Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1210232138540.2756@ionosAcked-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 60713a0c ] As documented in RFC4861 (Neighbor Discovery for IP version 6) 7.2.6., unsolicited neighbour advertisements should be sent to the all-nodes multicast address. Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Leblond authored
[ Upstream commit a3d744e9 ] Due to a NULL dereference, the following patch is causing oops in normal trafic condition: commit c0de08d0 Author: Eric Leblond <eric@regit.org> Date: Thu Aug 16 22:02:58 2012 +0000 af_packet: don't emit packet on orig fanout group This buggy patch was a feature fix and has reached most stable branches. When skb->sk is NULL and when packet fanout is used, there is a crash in match_fanout_group where skb->sk is accessed. This patch fixes the issue by returning false as soon as the socket is NULL: this correspond to the wanted behavior because the kernel as to resend the skb to all the listening socket in this case. Signed-off-by:
Eric Leblond <eric@regit.org> Signed-off-by:
-
Cyrill Gorcunov authored
[ Upstream commit cacb6ba0 ] We've observed that in case if UDP diag module is not supported in kernel the netlink returns NLMSG_DONE without notifying a caller that handler is missed. This patch makes __inet_diag_dump to return error code instead. So as example it become possible to detect such situation and handle it gracefully on userspace level. Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> CC: David Miller <davem@davemloft.net> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Pavel Emelyanov <xemul@parallels.com> Acked-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
Tom Parkin authored
[ Upstream commit 78933636 ] When creating an L2TPv3 Ethernet session, if register_netdev() should fail for any reason (for example, automatic naming for "l2tpeth%d" interfaces hits the 32k-interface limit), the netdev is freed in the error path. However, the l2tp_eth_sess structure's dev pointer is left uncleared, and this results in l2tp_eth_delete() then attempting to unregister the same netdev later in the session teardown. This results in an oops. To avoid this, clear the session dev pointer in the error path. Signed-off-by:
Tom Parkin <tparkin@katalix.com> Signed-off-by:
-
Peter Senna Tschudin authored
[ Upstream commit 57c10b61 ] Based on commit b27393ae Calling mdiobus_free without calling mdiobus_unregister causes BUG_ON(). This patch fixes the issue. The semantic patch that found this issue(http://coccinelle.lip6.fr/): // <smpl> @@ expression E; @@ ... when != mdiobus_unregister(E); + mdiobus_unregister(E); mdiobus_free(E); // </smpl> Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Tested-by:
Roland Stigge <stigge@antcom.de> Tested-by:
Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
[ Upstream commit 8f363b77 ] Reading TCP stats when using TCP Illinois congestion control algorithm can cause a divide by zero kernel oops. The division by zero occur in tcp_illinois_info() at: do_div(t, ca->cnt_rtt); where ca->cnt_rtt can become zero (when rtt_reset is called) Steps to Reproduce: 1. Register tcp_illinois: # sysctl -w net.ipv4.tcp_congestion_control=illinois 2. Monitor internal TCP information via command "ss -i" # watch -d ss -i 3. Establish new TCP conn to machine Either it fails at the initial conn, or else it needs to wait for a loss or a reset. This is only related to reading stats. The function avg_delay() also performs the same divide, but is guarded with a (ca->cnt_rtt > 0) at its calling point in update_params(). Thus, simply fix tcp_illinois_info(). Function tcp_illinois_info() / get_info() is called without socket lock. Thus, eliminate any race condition on ca->cnt_rtt by using a local stack variable. Simply reuse info.tcpv_rttcnt, as its already set to ca->cnt_rtt. Function avg_delay() is not affected by this race condition, as its called with the socket lock. Cc: Petr Matousek <pmatouse@redhat.com> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Hemant Kumar authored
[ Upstream commit 39707c2a ] Driver anchors the tx urbs and defers the urb submission if a transmit request comes when the interface is suspended. Anchoring urb increments the urb reference count. These deferred urbs are later accessed by calling usb_get_from_anchor() for submission during interface resume. usb_get_from_anchor() unanchors the urb but urb reference count remains same. This causes the urb reference count to remain non-zero after usb_free_urb() gets called and urb never gets freed. Hence call usb_put_urb() after anchoring the urb to properly balance the reference count for these deferred urbs. Also, unanchor these deferred urbs during disconnect, to free them up. Signed-off-by:
Hemant Kumar <hemantk@codeaurora.org> Acked-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Li RongQing authored
[ Upstream commit 14edd87d ] Commit a02e4b7d(Demark default hoplimit as zero) only changes the hoplimit checking condition and default value in ip6_dst_hoplimit, not zeros all hoplimit default value. Keep the zeroing ip6_template_metrics[RTAX_HOPLIMIT - 1] to force it as const, cause as a37e6e34(net: force dst_default_metrics to const section) Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a3374c42 ] tcp_ioctl() tries to take into account if tcp socket received a FIN to report correct number bytes in receive queue. But its flaky because if the application ate the last skb, we return 1 instead of 0. Correct way to detect that FIN was received is to test SOCK_DONE. Reported-by:
Elliot Hughes <enh@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 6d772ac5 ] On some suspend/resume operations involving wimax device, we have noticed some intermittent memory corruptions in netlink code. Stéphane Marchesin tracked this corruption in netlink_update_listeners() and suggested a patch. It appears netlink_release() should use kfree_rcu() instead of kfree() for the listeners structure as it may be used by other cpus using RCU protection. netlink_release() must set to NULL the listeners pointer when it is about to be freed. Also have to protect netlink_update_listeners() and netlink_has_listeners() if listeners is NULL. Add a nl_deref_protected() lockdep helper to properly document which locks protects us. Reported-by:
Jonathan Kliegman <kliegs@google.com> Signed-off-by:
-
Zijie Pan authored
[ Upstream commit f6e80abe ] Bug introduced by commit edfee033 (sctp: check src addr when processing SACK to update transport state) Signed-off-by:
Zijie Pan <zijie.pan@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit 0914f796 upstream. When disconnect callback is called, each component should wake up sleepers and check card->shutdown flag for avoiding the endless sleep blocking the proper resource release. Signed-off-by:
-
Takashi Iwai authored
commit a0830dbd upstream. For more strict protection for wild disconnections, a refcount is introduced to the card instance, and let it up/down when an object is referred via snd_lookup_*() in the open ops. The free-after-last-close check is also changed to check this refcount instead of the empty list, too. Reported-by:
Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by:
-
Takashi Iwai authored
commit 888ea7d5 upstream. Similar like the previous commit, cover with chip->shutdown_rwsem and chip->shutdown checks. Reported-by:
-
Takashi Iwai authored
commit 34f3c89f upstream. Replace mutex with rwsem for codec->shutdown protection so that concurrent accesses are allowed. Also add the protection to snd_usb_autosuspend() and snd_usb_autoresume(), too. Reported-by:
-
Takashi Iwai authored
commit 978520b7 upstream. Close some races at disconnection of a USB audio device by adding the chip->shutdown_mutex and chip->shutdown check at appropriate places. The spots to put bandaids are: - PCM prepare, hw_params and hw_free - where the usb device is accessed for communication or get speed, in mixer.c and others; the device speed is now cached in subs->speed instead of accessing to chip->dev The accesses in PCM open and close don't need the mutex protection because these are already handled in the core PCM disconnection code. The autosuspend/autoresume codes are still uncovered by this patch because of possible mutex deadlocks. They'll be covered by the upcoming change to rwsem. Also the mixer codes are untouched, too. These will be fixed in another patch, too. Reported-by:
-
Takashi Iwai authored
commit 9b0573c0 upstream. Fix races at PCM disconnection: - while a PCM device is being opened or closed - while the PCM state is being changed without lock in prepare, hw_params, hw_free ops Reported-by:
-
Jean Delvare authored
commit 3300fb4f upstream. Don't assume bank 0 is selected at device probe time. This may not be the case. Force bank selection at first register access to guarantee that we read the right registers upon driver loading. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
