[ Upstream commit a88eceb1 ]

This patch adds spi_master_put in release function
to drop the controller's refcount.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a4b7013d ]

BUG: KASAN: slab-out-of-bounds in rxe_mem_init_user+0x6c1/0x740 [rdma_rxe]
Read of size 8 at addr ffff88805c01a608 by task ib_send_bw/573

CPU: 24 PID: 573 Comm: ib_send_bw Not tainted 5.0.0-rc5+ #189
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 rxe_mem_init_user+0x6c1/0x740 [rdma_rxe]
 rxe_reg_user_mr+0x9b/0x110 [rdma_rxe]
 ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs]
 ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs]
 ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs]
 rxe_mem_init_user+0x6c1/0x740 [rdma_rxe]
 rxe_reg_user_mr+0x9b/0x110 [rdma_rxe]
 ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs]
 ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs]
 ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs]
 ib_uverbs_cmd_verbs+0x5f2/0xf20 [ib_uverbs]
 ib_uverbs_ioctl+0x202/0x310 [ib_uverbs]
 do_vfs_ioctl+0x193/0x1440
 ksys_ioctl+0x3a/0x70
 __x64_sys_ioctl+0x6f/0xb0
 do_syscall_64+0x13f/0x570
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Allocated by task 573:
 __kasan_kmalloc.constprop.5+0xc1/0xd0
 __kmalloc+0x161/0x310
 rxe_mem_alloc+0x52/0x470 [rdma_rxe]
 rxe_mem_init_user+0x113/0x740 [rdma_rxe]
 rxe_reg_user_mr+0x9b/0x110 [rdma_rxe]
 ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs]
 ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs]
 ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs]
 ib_uverbs_cmd_verbs+0x5f2/0xf20 [ib_uverbs]
 ib_uverbs_ioctl+0x202/0x310 [ib_uverbs]
 do_vfs_ioctl+0x193/0x1440
 ksys_ioctl+0x3a/0x70
 __x64_sys_ioctl+0x6f/0xb0
 do_syscall_64+0x13f/0x570
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 0:
 __kasan_slab_free+0x12e/0x180
 kfree+0x10a/0x2c0
 rcu_process_callbacks+0xa77/0x1260
 __do_softirq+0x2ad/0xacb

Test scenario:
 ib_send_bw -x 1 -d rxe0 -a &
 ib_send_bw -x 1 -d rxe0 -a localhost

Fixes: 8700e3e7 ("Soft RoCE driver")
Reported-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Tested-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 76646085 ]

Handle potential errors returned from kcalloc().

 [ bp: rewrite commit message. ]
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Banman <abanman@hpe.com>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: pakki001@umn.edu
Cc: platform-driver-x86@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Varsha Rao <rvarsha016@gmail.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190325202924.4624-1-kjlu@umn.eduSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b699cce1 ]

The rcu_head_after_call_rcu() function reads the rhp->func pointer twice,
which can result in a false-positive WARN_ON_ONCE() if the callback
were passed to call_rcu() between the two reads.  Although racing
rcu_head_after_call_rcu() with call_rcu() is to be a dubious use case
(the return value is not reliable in that case), intermittent and
irreproducible warnings are also quite dubious.  This commit therefore
uses a single READ_ONCE() to pick up the value of rhp->func once, then
tests that value twice, thus guaranteeing consistent processing within
rcu_head_after_call_rcu()().

Neverthless, racing rcu_head_after_call_rcu() with call_rcu() is still
a dubious use case.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
[ paulmck: Add blank line after declaration per checkpatch.pl. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ad092c02 ]

If the specified rcuperf.perf_type is not in the rcu_perf_init()
function's perf_ops[] array, rcuperf prints some console messages and
then invokes rcu_perf_cleanup() to set state so that a future torture
test can run.  However, rcu_perf_cleanup() also attempts to end the
test that didn't actually start, and in doing so relies on the value
of cur_ops, a value that is not particularly relevant in this case.
This can result in confusing output or even follow-on failures due to
attempts to use facilities that have not been properly initialized.

This commit therefore sets the value of cur_ops to NULL in this case and
inserts a check near the beginning of rcu_perf_cleanup(), thus avoiding
relying on an irrelevant cur_ops value.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 006c0770 ]

Linux reads MCG_CAP[Count] to find the number of MCA banks visible to a
CPU. Currently, this number is the same for all CPUs and a warning is
shown if there is a difference. The number of banks is overwritten with
the MCG_CAP[Count] value of each following CPU that boots.

According to the Intel SDM and AMD APM, the MCG_CAP[Count] value gives
the number of banks that are available to a "processor implementation".
The AMD BKDGs/PPRs further clarify that this value is per core. This
value has historically been the same for every core in the system, but
that is not an architectural requirement.

Future AMD systems may have different MCG_CAP[Count] values per core,
so the assumption that all CPUs will have the same MCG_CAP[Count] value
will no longer be valid.

Also, the first CPU to boot will allocate the struct mce_banks[] array
using the number of banks based on its MCG_CAP[Count] value. The machine
check handler and other functions use the global number of banks to
iterate and index into the mce_banks[] array. So it's possible to use an
out-of-bounds index on an asymmetric system where a following CPU sees a
MCG_CAP[Count] value greater than its predecessors.

Thus, allocate the mce_banks[] array to the maximum number of banks.
This will avoid the potential out-of-bounds index since the value of
mca_cfg.banks is capped to MAX_NR_BANKS.

Set the value of mca_cfg.banks equal to the max of the previous value
and the value for the current CPU. This way mca_cfg.banks will always
represent the max number of banks detected on any CPU in the system.

This will ensure that all CPUs will access all the banks that are
visible to them. A CPU that can access fewer than the max number of
banks will find the registers of the extra banks to be read-as-zero.

Furthermore, print the resulting number of MCA banks in use. Do this in
mcheck_late_init() so that the final value is printed after all CPUs
have been initialized.

Finally, get bank count from target CPU when doing injection with mce-inject
module.

 [ bp: Remove out-of-bounds example, passify and cleanup commit message. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Pu Wen <puwen@hygon.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20180727214009.78289-1-Yazen.Ghannam@amd.comSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b813afae ]

If the specified rcutorture.torture_type is not in the rcu_torture_init()
function's torture_ops[] array, rcutorture prints some console messages
and then invokes rcu_torture_cleanup() to set state so that a future
torture test can run.  However, rcu_torture_cleanup() also attempts to
end the test that didn't actually start, and in doing so relies on the
value of cur_ops, a value that is not particularly relevant in this case.
This can result in confusing output or even follow-on failures due to
attempts to use facilities that have not been properly initialized.

This commit therefore sets the value of cur_ops to NULL in this case
and inserts a check near the beginning of rcu_torture_cleanup(),
thus avoiding relying on an irrelevant cur_ops value.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f19501aa ]

There has been a lurking "TBD" in the machine check poll routine ever
since it was first split out from the machine check handler. The
potential issue is that the poll routine may have just begun a read from
the STATUS register in a machine check bank when the hardware logs an
error in that bank and signals a machine check.

That race used to be pretty small back when machine checks were
broadcast, but the addition of local machine check means that the poll
code could continue running and clear the error from the bank before the
local machine check handler on another CPU gets around to reading it.

Fix the code to be sure to only process errors that need to be processed
in the poll code, leaving other logged errors alone for the machine
check handler to find and process.

 [ bp: Massage a bit and flip the "== 0" check to the usual !(..) test. ]

Fixes: b79109c3 ("x86, mce: separate correct machine check poller and fatal exception handler")
Fixes: ed7290d0 ("x86, mce: implement new status bits")
Reported-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Link: https://lkml.kernel.org/r/20190312170938.GA23035@agluck-deskSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit dc7fe518 ]

Attempt to use check_shl_overflow() with inputs of unsigned type
produces the following compilation warnings.

drivers/infiniband/hw/mlx5/qp.c: In function _set_user_rq_size_:
./include/linux/overflow.h:230:6: warning: comparison of unsigned
expression >= 0 is always true [-Wtype-limits]
   _s >= 0 && _s < 8 * sizeof(*d) ? _s : 0;  \
      ^~
drivers/infiniband/hw/mlx5/qp.c:5820:6: note: in expansion of macro _check_shl_overflow_
  if (check_shl_overflow(rwq->wqe_count, rwq->wqe_shift,
&rwq->buf_size))
      ^~~~~~~~~~~~~~~~~~
./include/linux/overflow.h:232:26: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
  (_to_shift != _s || *_d < 0 || _a < 0 ||   \
                          ^
drivers/infiniband/hw/mlx5/qp.c:5820:6: note: in expansion of macro _check_shl_overflow_
  if (check_shl_overflow(rwq->wqe_count, rwq->wqe_shift, &rwq->buf_size))
      ^~~~~~~~~~~~~~~~~~
./include/linux/overflow.h:232:36: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
  (_to_shift != _s || *_d < 0 || _a < 0 ||   \
                                    ^
drivers/infiniband/hw/mlx5/qp.c:5820:6: note: in expansion of macro _check_shl_overflow_
  if (check_shl_overflow(rwq->wqe_count, rwq->wqe_shift,&rwq->buf_size))
      ^~~~~~~~~~~~~~~~~~

Fixes: 0c668477 ("overflow.h: Add arithmetic shift helper")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7ca8c2c8 ]

The module was initializing completions whenever it was going to wait on
them, and not when the completion was allocated.  This is incorrect
according to the completion docs:

    Calling init_completion() on the same completion object twice is
    most likely a bug [...]

Re-initialization is also unnecessary because the module never uses
complete_all().  Fix this by only ever initializing the completion a
single time, and log if the completions are not consumed as intended
(this is not a fatal problem, but should not go unnoticed).
Signed-off-by: George Hilliard <thirtythreeforty@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1bbb1c31 ]

ipw->attr_memory and ipw->common_memory are assigned with the
return value of ioremap. ioremap may fail, but no checks
are enforced. The fix inserts the checks to avoid potential
NULL pointer dereferences.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4b0a2c5f ]

For regular serial ports we do not initialize value of vtermno
variable. A garbage value is assigned for non console ports.
The value can be observed as a random integer with [1].

[1] vim /sys/kernel/debug/virtio-ports/vport*p*

This patch initialize the value of vtermno for console serial
ports to '1' and regular serial ports are initiaized to '0'.

Reported-by: siliu@redhat.com
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b49f6d83 ]

This patch fixes the error exit path of fastrpc_init_create_process().
If the DMA allocation or the DSP invoke fails the fastrpc_map was freed
but not removed from the mapping list leading to a double free once the
mapping list is emptied in fastrpc_device_release().

[srinivas kandagatla]: Cleaned up error path labels and reset init mem
to NULL after free
Fixes: d73f71c7("misc: fastrpc: Add support for create remote init process")
Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 415a0729 ]

dma_alloc_coherent buffers could have writes queued in store buffers so
commit them before sending buffer to DSP using correct dma barriers.
Same with vice-versa.

Fixes: c68cfb71 ("misc: fastrpc: Add support for context Invoke method")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 80f3afd7 ]

While passing address phy address to DSP, take care of the offset
calculated from virtual address vma.

Fixes: c68cfb71 ("misc: fastrpc: Add support for context Invoke method")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c5e06ba2 ]

Fixes the following crash as the return was missing from the check if an
fcport is offloaded. If we hit this code we continue to try to post an
invalid task which can lead to the crash:

[30259.616411] [0000:61:00.3]:[qedf_post_io_req:989]:3: Session not offloaded yet.
[30259.616413] [0000:61:00.3]:[qedf_upload_connection:1340]:3: Uploading connection port_id=490020.
[30259.623769] BUG: unable to handle kernel NULL pointer dereference at 0000000000000198
[30259.631645] IP: [<ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf]
[30259.638816] PGD 0
[30259.640841] Oops: 0000 [#1] SMP
[30259.644098] Modules linked in: fuse xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables devlink ip6table_filter ip6_tables iptable_filter vfat fat ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib ib_ucm ib_umad dm_service_time skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel rpcrdma sunrpc rdma_ucm ib_uverbs lrw gf128mul ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi qedr(OE) glue_helper ablk_helper cryptd ib_core dm_round_robin joydev pcspkr ipmi_ssif ses enclosure ipmi_si ipmi_devintf ipmi_msghandler mei_me
[30259.715529]  mei sg hpilo hpwdt shpchp wmi lpc_ich acpi_power_meter dm_multipath ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic uas usb_storage mgag200 qedf(OE) i2c_algo_bit libfcoe drm_kms_helper libfc syscopyarea sysfillrect scsi_transport_fc qede(OE) sysimgblt fb_sys_fops ptp ttm pps_core drm qed(OE) smartpqi crct10dif_pclmul crct10dif_common crc32c_intel i2c_core scsi_transport_sas scsi_tgt dm_mirror dm_region_hash dm_log dm_mod
[30259.754237] CPU: 9 PID: 977 Comm: kdmwork-253:7 Kdump: loaded Tainted: G        W  OE  ------------   3.10.0-862.el7.x86_64 #1
[30259.765664] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/04/2018
[30259.775000] task: ffff8c801efd0000 ti: ffff8c801efd8000 task.ti: ffff8c801efd8000
[30259.782505] RIP: 0010:[<ffffffffc035b1ed>]  [<ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf]
[30259.792116] RSP: 0018:ffff8c801efdbbb0  EFLAGS: 00010046
[30259.797444] RAX: 0000000000000000 RBX: ffffa7f1450948d8 RCX: ffff8c7fe5bc40c8
[30259.804600] RDX: ffff8c800715b300 RSI: ffffa7f1450948d8 RDI: ffff8c80169c2480
[30259.811755] RBP: ffff8c801efdbc30 R08: 00000000000000ae R09: ffff8c800a314540
[30259.818911] R10: ffff8c7fe5bc40c8 R11: ffff8c801efdb8ae R12: 0000000000000000
[30259.826068] R13: ffff8c800715b300 R14: ffff8c80169c2480 R15: ffff8c8005da28e0
[30259.833223] FS:  0000000000000000(0000) GS:ffff8c803f840000(0000) knlGS:0000000000000000
[30259.841338] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[30259.847100] CR2: 0000000000000198 CR3: 000000081242e000 CR4: 00000000007607e0
[30259.854256] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[30259.861412] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[30259.868568] PKRU: 00000000
[30259.871278] Call Trace:
[30259.873737]  [<ffffffffc035c948>] qedf_post_io_req+0x148/0x680 [qedf]
[30259.880201]  [<ffffffffc035d070>] qedf_queuecommand+0x1f0/0x240 [qedf]
[30259.886749]  [<ffffffffa329b050>] scsi_dispatch_cmd+0xb0/0x240
[30259.892600]  [<ffffffffa32a45bc>] scsi_request_fn+0x4cc/0x680
[30259.898364]  [<ffffffffa3118ad9>] __blk_run_queue+0x39/0x50
[30259.903954]  [<ffffffffa3114393>] __elv_add_request+0xd3/0x260
[30259.909805]  [<ffffffffa311baf0>] blk_insert_cloned_request+0xf0/0x1b0
[30259.916358]  [<ffffffffc010b622>] map_request+0x142/0x220 [dm_mod]
[30259.922560]  [<ffffffffc010b716>] map_tio_request+0x16/0x40 [dm_mod]
[30259.928932]  [<ffffffffa2ebb1f5>] kthread_worker_fn+0x85/0x180
[30259.934782]  [<ffffffffa2ebb170>] ? kthread_stop+0xf0/0xf0
[30259.940284]  [<ffffffffa2ebae31>] kthread+0xd1/0xe0
[30259.945176]  [<ffffffffa2ebad60>] ? insert_kthread_work+0x40/0x40
[30259.951290]  [<ffffffffa351f61d>] ret_from_fork_nospec_begin+0x7/0x21
[30259.957750]  [<ffffffffa2ebad60>] ? insert_kthread_work+0x40/0x40
[30259.963860] Code: fe 41 55 49 89 d5 41 54 53 48 89 f3 48 83 ec 58 4c 8b 67 28 4c 8b 4e 18 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 4c 8b 7e 58 <49> 8b 84 24 98 01 00 00 48 8b 00 f6 80 31 01 00 00 10 0f 85 0b
[30259.983372] RIP  [<ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf]
[30259.990630]  RSP <ffff8c801efdbbb0>
[30259.994127] CR2: 0000000000000198
Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d623dfd2 ]

The InfiniBand Architecture Specification section 10.6.7.2.4 TYPE 2 MEMORY
WINDOWS says that if the CI supports the Base Memory Management Extensions
defined in this specification, the R_Key format for a Type 2 Memory Window
must consist of:

* 24 bit index in the most significant bits of the R_Key, which is owned
  by the CI, and
* 8 bit key in the least significant bits of the R_Key, which is owned by
  the Consumer.

This means that the kernel should compare only the index part of a R_Key
to determine equality with another R_Key.

Fixes: db570d7d ("IB/mlx5: Add ODP support to MW")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7a8e61f8 ]

Several people reported testing failures after setting CLOCK_REALTIME close
to the limits of the kernel internal representation in nanoseconds,
i.e. year 2262.

The failures are exposed in subsequent operations, i.e. when arming timers
or when the advancing CLOCK_MONOTONIC makes the calculation of
CLOCK_REALTIME overflow into negative space.

Now people start to paper over the underlying problem by clamping
calculations to the valid range, but that's just wrong because such
workarounds will prevent detection of real issues as well.

It is reasonable to force an upper bound for the various methods of setting
CLOCK_REALTIME. Year 2262 is the absolute upper bound. Assume a maximum
uptime of 30 years which is plenty enough even for esoteric embedded
systems. That results in an upper bound of year 2232 for setting the time.

Once that limit is reached in reality this limit is only a small part of
the problem space. But until then this stops people from trying to paper
over the problem at the wrong places.
Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reported-by: Hongbo Yao <yaohongbo@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1903231125480.2157@nanos.tec.linutronix.deSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 167e5354 ]

The PLL parameters are computed by looping over the range of acceptable
M, N and E values, and selecting the combination that produces the
output frequency closest to the target. The internal frequency
constraints are taken into account by restricting the tested values for
the PLL parameters, reducing the search space. The target frequency,
however, is only taken into account when computing the post-PLL divider,
which can result in a 0 value for the divider when the PLL output
frequency being tested is lower than half of the target frequency.
Subsequent loops will produce a better set of PLL parameters, but for
some of the iterations this can result in a division by 0.

Fix it by clamping the divider value. We could instead restrict the E
values being tested in the inner loop, but that would require additional
calculation that would likely be less efficient as the E parameter can
only take three different values.

Fixes: c25c0136 ("drm: rcar-du: lvds: D3/E3 support")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 00d082cc ]

On the D3 SoC the LVDS PHY must be enabled in the same register write
that enables the LVDS output. Skip writing the LVEN bit independently
on that platform, it will be set by the write that sets LVRES.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fd21b79e ]

uuid in add_switch is allocted via kmemdup which can fail. The patch
logs the error and cleans up the allocated memory for switch.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6183d5a5 ]

No check is enforced for the return value of kzalloc,
which may lead to NULL-pointer dereference.

The patch fixes this issue.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 52fafc58 ]

Commit 0650a914 ("media: mtk-vcodec: Correct return type for mem2mem
buffer helpers") fixed the return types for mem2mem buffer helper
functions by changing a few local variables from vb2_buffer to
vb2_v4l2_buffer. However, it left a few accesses to vb2_buffer::planes
as-is, accidentally turning them into accesses to
vb2_v4l2_buffer::planes and resulting in values being read from/written
to the wrong place.

Fix this by inserting vb2_buf into these accesses so they mimic their
original behavior.

Fixes: 0650a914 ("media: mtk-vcodec: Correct return type for mem2mem buffer helpers")
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c2999c28 ]

Since the following commit:

  38ac0287 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB")

efifb_probe() checks its memory range via efi_mem_desc_lookup(),
and this leads to a spurious error message:

   EFI_MEMMAP is not enabled

at every boot on KVM.  This is quite annoying since the error message
appears even if you set "quiet" boot option.

Since this happens on legacy boot, which strangely enough exposes
a EFI framebuffer via screen_info, let's double check that we are
doing an EFI boot before attempting to access the EFI memory map.
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190328193429.21373-3-ard.biesheuvel@linaro.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9b9ea7c2 ]

In order to prevent ISOC URBs from being infinitely resubmitted,
the driver's USB disconnect handler must kill all the in-flight URBs.

While here, change the URB packet status message to a debug level,
to avoid spamming the console too much.

This commit fixes a lockup caused by an interrupt storm coming
from the URB completion handler.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9c2ccc32 ]

Smatch marks skb->data as untrusted so it warns that "evt_hdr->dlen"
can copy up to 255 bytes and we only have room for two bytes.  Even
if this comes from the firmware and we trust it, the new policy
generally is just to fix it as kernel hardenning.

I can't test this code so I tried to be very conservative.  I considered
not allowing "evt_hdr->dlen == 1" because it doesn't initialize the
whole variable but in the end I decided to allow it and manually
initialized "asic_id" and "asic_ver" to zero.

Fixes: e8454ff7 ("[media] drivers:media:radio: wl128x: FM Driver Common sources")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit aeb0d0f5 ]

devm_kcalloc may fail and return a null pointer. The fix returns
-ENOMEM upon failures to avoid null pointer dereferences.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c03a0fd0 ]

syzbot is hitting use-after-free bug in uinput module [1]. This is because
kobject_uevent(KOBJ_REMOVE) is called again due to commit 0f4dafc0
("Kobject: auto-cleanup on final unref") after memory allocation fault
injection made kobject_uevent(KOBJ_REMOVE) from device_del() from
input_unregister_device() fail, while uinput_destroy_device() is expecting
that kobject_uevent(KOBJ_REMOVE) is not called after device_del() from
input_unregister_device() completed.

That commit intended to catch cases where nobody even attempted to send
"remove" uevents. But there is no guarantee that an event will ultimately
be sent. We are at the point of no return as far as the rest of the kernel
is concerned; there are no repeats or do-overs.

Also, it is not clear whether some subsystem depends on that commit.
If no subsystem depends on that commit, it will be better to remove
the state_{add,remove}_uevent_sent logic. But we don't want to risk
a regression (in a patch which will be backported) by trying to remove
that logic. Therefore, as a first step, let's avoid the use-after-free bug
by making sure that kobject_uevent(KOBJ_REMOVE) won't be triggered twice.

[1] https://syzkaller.appspot.com/bug?id=8b17c134fe938bbddd75a45afaa9e68af43a362dReported-by: syzbot <syzbot+f648cfb7e0b52bf7ae32@syzkaller.appspotmail.com>
Analyzed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 0f4dafc0 ("Kobject: auto-cleanup on final unref")
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e850b89f ]

Unmapping ptes in the device MMU on Palladium can take a long time, which
can cause a kernel BUG of CPU soft lockup.

This patch minimize the chances for this bug by sleeping a little between
unmapping ptes.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 01919493 ]

Fixes: SPI driver can be built as module so perform SPI controller reset
on probe to make sure it is in valid state before initiating transfer.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1f87b0cd ]

According to hidpp20_batterylevel_get_battery_info my Logitech K270
keyboard reports only 2 battery levels. This matches with what I've seen
after testing with batteries at varying level of fullness, it always
reports either 5% or 30%.

Windows reports "battery good" for the 30% level. I've captured an USB
trace of Windows reading the battery and it is getting the same info
as the Linux hidpp code gets.

Now that Linux handles these devices as hidpp devices, it reports the
battery as being low as it treats anything under 31% as low, this leads
to the user constantly getting a "Keyboard battery is low" warning from
GNOME3, which is very annoying.

This commit fixes this by changing the low threshold to anything under
30%, which I assume is what Windows does.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b9df2ea2 ]

The clock sources of the AXI-bus clock (266.66 MHz) used for Audio-DMAC
DMA transfers are:

    Channel        R-Car H3    R-Car M3-W    R-Car M3-N    R-Car E3
    ---------------------------------------------------------------
    Audio-DMAC0    S1D2        S1D2          S1D2          S1D2
    Audio-DMAC1    S1D2        S1D2          S1D2          -

As a result, change the parent clocks of the Audio-DMAC{0,1} module
clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S1D2, and change the
parent clock of the Audio-DMAC0 module on R-Car E3 to S1D2.

NOTE: This information will be reflected in a future revision of the
      R-Car Gen3 Hardware Manual.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[geert: Update R-Car D3, RZ/G2M, and RZ/G2E]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0383ad43 ]

xen_biovec_phys_mergeable() only needs .bv_page of the 2nd bio bvec
for checking if the two bvecs can be merged, so pass page to
xen_biovec_phys_mergeable() directly.

No function change.

Cc: ris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: xen-devel@lists.xenproject.org
Cc: Omar Sandoval <osandov@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit db5ebd6e ]

XEN has special page merge requirement, see xen_biovec_phys_mergeable().
We can't merge pages into one bvec simply for XEN.

So move XEN's specific check on page merge into __bio_try_merge_page(),
then abvoid to break XEN by multi-page bvec.

Cc: ris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: xen-devel@lists.xenproject.org
Cc: Omar Sandoval <osandov@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3c772f71 ]

The clock sources of the AXI BUS clock (266.66 MHz) used for SYS-DMAC
DMA transfers are:

    Channel      R-Car H3    R-Car M3-W    R-Car M3-N
    -------------------------------------------------
    SYS-DMAC0    S0D3        S0D3          S0D3
    SYS-DMAC1    S3D1        S3D1          S3D1
    SYS-DMAC2    S3D1        S3D1          S3D1

As a result, change the parent clocks of the SYS-DMAC{1,2} module clocks
on R-Car H3, R-Car M3-W, and R-Car M3-N to S3D1.

NOTE: This information will be reflected in a future revision of the
      R-Car Gen3 Hardware Manual.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[geert: Update RZ/G2M]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 76497732 ]

The use of zero-sized array causes undefined behaviour when it is not
the last member in a structure. As it happens to be in this case.

Also, the current code makes use of a language extension to the C90
standard, but the preferred mechanism to declare variable-length
types such as this one is a flexible array member, introduced in
C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last. Which is beneficial
to cultivate a high-quality code.

Fixes: e48f129c ("[SCSI] cxgb3i: convert cdev->l2opt to use rcu to prevent NULL dereference")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 64b92de9 ]

The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./sound/soc/codecs/wcd9335.c:5193:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 5183, but without a correspon    ding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com> (commit_signer:1/11=9%,authored:1/11=9%)
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c7052471 ]

The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./sound/soc/fsl/fsl_utils.c:74:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding     object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b820d52e ]

The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./sound/soc/fsl/eukrea-tlv320.c:121:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 102, but without a correspo    nding object release within this function.
./sound/soc/fsl/eukrea-tlv320.c:127:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 102, but without a correspo    nding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 58e75155 ]

As seen on some USB wireless keyboards manufactured by Primax, the HID
parser was using some assumptions that are not always true. In this case
it's s the fact that, inside the scope of a main item, an Usage Page
will always precede an Usage.

The spec is not pretty clear as 6.2.2.7 states "Any usage that follows
is interpreted as a Usage ID and concatenated with the Usage Page".
While 6.2.2.8 states "When the parser encounters a main item it
concatenates the last declared Usage Page with a Usage to form a
complete usage value." Being somewhat contradictory it was decided to
match Window's implementation, which follows 6.2.2.8.

In summary, the patch moves the Usage Page concatenation from the local
item parsing function to the main item parsing function.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Terry Junge <terry.junge@poly.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>