- 09 Jun, 2020 1 commit
-
-
Lubomir Rintel authored
The include file for input clock in the example was missing, breaking the validation. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Reported-by:
Rob Herring <robh+dt@kernel.org> Link: https://lore.kernel.org/r/20200605065258.567858-1-lkundrak@v3.skAcked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Stephen Boyd <sboyd@kernel.org>
-
- 01 Jun, 2020 5 commits
-
-
Stephen Boyd authored
- Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - New clk driver for Baikal-T1 SoCs * clk-vc5: dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 * clk-hsdk: CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first * clk-mediatek: clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC * clk-baikal: clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
-
Stephen Boyd authored
- Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for Qualcomm's MSM8939 Generic Clock Controller - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips * clk-mmp: clk: mmp2: Add audio clock controller driver dt-bindings: clock: Add Marvell MMP Audio Clock Controller binding clk: mmp2: Add support for power islands dt-bindings: marvell,mmp2: Add ids for the power domains dt-bindings: clock: Make marvell,mmp2-clock a power controller clk: mmp2: Add the audio clock clk: mmp2: Add the I2S clocks clk: mmp2: Rename mmp2_pll_init() to mmp2_main_clk_init() clk: mmp2: Move thermal register defines up a bit dt-bindings: marvell,mmp2: Add clock id for the Audio clock dt-bindings: marvell,mmp2: Add clock id for the I2S clocks clk: mmp: frac: Allow setting bits other than the numerator/denominator clk: mmp: frac: Do not lose last 4 digits of precision * clk-intel: clk: intel: remove redundant initialization of variable rate64 clk: intel: Add CGU clock driver for a new SoC dt-bindings: clk: intel: Add bindings document & header file for CGU * clk-ingenic: clk: ingenic: Mark ingenic_tcu_of_match as __maybe_unused clk: X1000: Add FIXDIV for SSI clock of X1000. dt-bindings: clock: Add and reorder ABI for X1000. clk: Ingenic: Add CGU driver for X1830. dt-bindings: clock: Add X1830 clock bindings. clk: Ingenic: Adjust cgu code to make it compatible with X1830. clk: Ingenic: Remove unnecessary spinlock when reading registers. * clk-qcom: clk: qcom: Add missing msm8998 ufs_unipro_core_clk_src dt-bindings: clock: Add YAML schemas for QCOM A53 PLL clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller clk: qcom: gcc: Add support for Secure control source clock dt-bindings: clock: Add gcc_sec_ctrl_clk_src clock ID clk: qcom: gcc: Add support for a new frequency for SC7180 clk: qcom: Add DT bindings for MSM8939 GCC clk: qcom: gcc: Add missing UFS clocks for SM8150 clk: qcom: gcc: Add GPU and NPU clocks for SM8150 clk: qcom: mmcc-msm8996: Properly describe GPU_GX gdsc clk: qcom: gdsc: Handle GDSC regulator supplies clk: qcom: msm8916: Fix the address location of pll->config_reg * clk-silabs: clk: clk-si5341: Add support for the Si5345 series
-
Stephen Boyd authored
* clk-unisoc: clk: sprd: add mipi_csi_xx gate clocks clk: sprd: add dt-bindings include for mipi_csi_xx clocks dt-bindings: clk: sprd: add mipi_csi_xx clocks for SC9863A clk: sprd: check its parent status before reading gate clock clk: sprd: return correct type of value for _sprd_pll_recalc_rate clk: sprd: mark the local clock symbols static * clk-trivial: clk: versatile: remove redundant assignment to pointer clk clk: clk-xgene: Fix a typo in Kconfig clk: Remove unused inline function clk_debug_reparent * clk-bcm: clk: bcm2835: Constify struct debugfs_reg32 clk: bcm2835: Remove casting to bcm2835_clk_register clk: bcm2835: Fix return type of bcm2835_register_gate * clk-st: clk: clk-flexgen: fix clock-critical handling * clk-ast2600: clk: ast2600: Fix AHB clock divider for A1
-
Stephen Boyd authored
Merge branches 'clk-tegra', 'clk-imx', 'clk-zynq', 'clk-socfpga', 'clk-at91' and 'clk-ti' into clk-next - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - Support for Intel Agilex clks * clk-tegra: clk: tegra: Add Tegra210 CSI TPG clock gate clk: tegra30: Use custom CCLK implementation clk: tegra20: Use custom CCLK implementation clk: tegra: cclk: Add helpers for handling PLLX rate changes clk: tegra: pll: Add pre/post rate-change hooks clk: tegra: Add custom CCLK implementation clk: tegra: Remove the old emc_mux clock for Tegra210 clk: tegra: Implement Tegra210 EMC clock clk: tegra: Export functions for EMC clock scaling clk: tegra: Add PLLP_UD and PLLMB_UD for Tegra210 clk: tegra: Rename Tegra124 EMC clock source file dt-bindings: clock: tegra: Add clock ID for CSI TPG clock * clk-imx: clk: imx: use imx8m_clk_hw_composite_bus for i.MX8M bus clk slice clk: imx: add imx8m_clk_hw_composite_bus clk: imx: add mux ops for i.MX8M composite clk clk: imx8m: migrate A53 clk root to use composite core clk: imx8mp: use imx8m_clk_hw_composite_core to simplify code clk: imx8mp: Define gates for pll1/2 fixed dividers clk: imx: imx8mp: fix pll mux bit clk: imx8m: drop clk_hw_set_parent for A53 dt-bindings: clocks: imx8mp: Add ids for audiomix clocks clk: imx: Add helpers for passing the device as argument clk: imx: pll14xx: Add the device as argument when registering clk: imx: gate2: Allow single bit gating clock clk: imx: clk-pllv3: Use readl_relaxed_poll_timeout() for PLL lock wait clk: imx: clk-sscg-pll: Remove unnecessary blank lines clk: imx: drop the dependency on ARM64 for i.MX8M clk: imx7ulp: make it easy to change ARM core clk clk: imx: imx6ul: change flexcan clock to support CiA bitrates * clk-zynq: clk: zynqmp: Make zynqmp_clk_get_max_divisor static clk: zynqmp: Update fraction clock check from custom type flags clk: zynqmp: Add support for custom type flags clk: zynqmp: fix memory leak in zynqmp_register_clocks clk: zynqmp: Fix invalid clock name queries clk: zynqmp: Fix divider2 calculation clk: zynqmp: Limit bestdiv with maxdiv * clk-socfpga: clk: socfpga: agilex: add clock driver for the Agilex platform dt-bindings: documentation: add clock bindings information for Agilex clk: socfpga: add const to _ops data structures clk: socfpga: remove clk_ops enable/disable methods clk: socfpga: stratix10: use new parent data scheme * clk-at91: clk: at91: allow setting all PMC clock parents via DT clk: at91: allow setting PCKx parent via DT clk: at91: optimize pmc data allocation clk: at91: pmc: decrement node's refcount clk: at91: pmc: do not continue if compatible not located clk: at91: Add peripheral clock for PTC * clk-ti: clk: ti: dra7: remove two unused symbols clk: ti: dra7xx: fix RNG clock parent clk: ti: dra7xx: mark MCAN clock as DRA76x only clk: ti: dra7xx: fix gpu clkctrl parent clk: ti: omap5: Add proper parent clocks for l4-secure clocks clk: ti: omap4: Add proper parent clocks for l4-secure clocks clk: ti: composite: fix memory leak
-
Stephen Boyd authored
Merge branches 'clk-selectable', 'clk-amlogic', 'clk-renesas', 'clk-samsung' and 'clk-allwinner' into clk-next - Allow the COMMON_CLK config to be selectable * clk-selectable: clk: Move HAVE_CLK config out of architecture layer MIPS: Loongson64: Drop asm/clock.h include ARM: mmp: Remove legacy clk code clk: Allow the common clk framework to be selectable mmc: meson-mx-sdio: Depend on OF_ADDRESS and not just OF MIPS: Remove redundant CLKDEV_LOOKUP selects h8300: Remove redundant CLKDEV_LOOKUP selects arm64: tegra: Remove redundant CLKDEV_LOOKUP selects ARM: Remove redundant CLKDEV_LOOKUP selects ARM: Remove redundant COMMON_CLK selects * clk-amlogic: clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers clk: meson: meson8b: Make the CCF use the glitch-free VPU mux clk: meson: meson8b: Fix the vclk_div{1, 2, 4, 6, 12}_en gate bits clk: meson: meson8b: Fix the polarity of the RESET_N lines clk: meson: meson8b: Fix the first parent of vid_pll_in_sel clk: meson: g12a: Prepare the GPU clock tree to change at runtime clk: meson: gxbb: Prepare the GPU clock tree to change at runtime clk: meson: meson8b: make the hdmi_sys clock tree mutable clk: meson8b: export the HDMI system clock * clk-renesas: dt-bindings: clock: renesas: mstp: Convert to json-schema dt-bindings: clock: renesas: div6: Convert to json-schema clk: renesas: cpg-mssr: Fix STBCR suspend/resume handling clk: renesas: rcar-gen2: Remove superfluous CLK_RENESAS_DIV6 selects clk: renesas: cpg-mssr: Add R8A7742 support dt-bindings: clock: renesas: cpg-mssr: Document r8a7742 binding clk: renesas: Add r8a7742 CPG Core Clock Definitions dt-bindings: power: rcar-sysc: Add r8a7742 power domain index macros MAINTAINERS: Add DT Bindings for Renesas Clock Generators clk: renesas: r9a06g032: Fix some typo in comments dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add r8a77961 support * clk-samsung: clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1 ARM/SAMSUNG EXYNOS ARM ARCHITECTURES: Use fallthrough; clk: samsung: Fix CLK_SMMU_FIMCL3 clock name on Exynos542x clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical * clk-allwinner: clk: sunxi: Fix incorrect usage of round_down()
-
- 30 May, 2020 6 commits
-
-
Adam Ford authored
IDT VersaClock 5 5P49V6965 has 5 clock outputs, 4 fractional dividers. Signed-off-by:
Adam Ford <aford173@gmail.com> Link: https://lkml.kernel.org/r/20200404161537.2312297-2-aford173@gmail.comAcked-by:
-
Adam Ford authored
Update IDT VersaClock 5 driver to support 5P49V6965. Signed-off-by:
-
Serge Semin authored
Nearly each Baikal-T1 IP-core is supposed to have a clock source of particular frequency. But since there are greater than five IP-blocks embedded into the SoC, the CCU PLLs can't fulfill all the needs. Baikal-T1 CCU provides a set of fixed and configurable clock dividers in order to generate a necessary signal for each chip sub-block. This driver creates the of-based hardware clocks for each divider available in Baikal-T1 CCU. The same way as for PLLs we split the functionality up into the clocks operations (gate, ungate, set rate, etc) and hardware clocks declaration/registration procedures. In accordance with the CCU documentation all its dividers are distributed into two CCU sub-blocks: AXI-bus and system devices reference clocks. The former sub-block is used to supply the clocks for AXI-bus interfaces (AXI clock domains) and the later one provides the SoC IP-cores reference clocks. Each sub-block is represented by a dedicated DT node, so they have different compatible strings to distinguish one from another. For some reason CCU provides the dividers of different types. Some dividers can be gateable some can't, some are fixed while the others are variable, some have special divider' limitations, some've got a non-standard register layout and so on. In order to cover all of these cases the hardware clocks driver is designed with an info-descriptor pattern. So there are special static descriptors declared for the dividers of each type with additional flags describing the block peculiarity. These descriptors are then used to create hardware clocks with proper operations. Some CCU dividers provide a way to reset a domain they generate a clock for. So the CCU AXI-bus and CCU system devices clock drivers also perform the reset controller registration. Signed-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200526222056.18072-5-Sergey.Semin@baikalelectronics.ru [sboyd@kernel.org: Drop return from void function, silence sparse warnings about initializing structs with NULL vs. integer] Signed-off-by:
-
Serge Semin authored
Baikal-T1 is supposed to be supplied with a high-frequency external oscillator. But in order to create signals suitable for each IP-block embedded into the SoC the oscillator output is primarily connected to a set of CCU PLLs. There are five of them to create clocks for the MIPS P5600 cores, an embedded DDR controller, SATA, Ethernet and PCIe domains. The last three domains though named by the biggest system interfaces in fact include nearly all of the rest SoC peripherals. Each of the PLLs is based on True Circuits TSMC CLN28HPM IP-core with an interface wrapper (so called safe PLL' clocks switcher) to simplify the PLL configuration procedure. This driver creates the of-based hardware clocks to use them then in the corresponding subsystems. In order to simplify the driver code we split the functionality up into the PLLs clocks operations and hardware clocks declaration/registration procedures. Even though the PLLs are based on the same IP-core, they may have some differences. In particular, some CCU PLLs support the output clock change without gating them (like CPU or PCIe PLLs), while the others don't, some CCU PLLs are critical and aren't supposed to be gated. In order to cover all of these cases the hardware clocks driver is designed with an info-descriptor pattern. So there are special static descriptors declared for each PLL, which is then used to create a hardware clock with proper operations. Additionally debugfs-files are provided for each PLL' field to make sure the implemented rate-PLLs-dividers calculation algorithm is correct. Signed-off-by:
-
Serge Semin authored
After being gained by the CCU PLLs the signals must be transformed to be suitable for the clock-consumers. This is done by a set of dividers embedded into the CCU. A first block of dividers is used to create reference clocks for AXI-bus of high-speed peripheral IP-cores of the chip. The second block dividers alter the PLLs output signals to be then consumed by SoC peripheral devices. Both block DT nodes are ordinary clock-providers with standard set of properties supported. But in addition to that each clock provider can be used to reset the corresponding clock domain. This makes the AXI-bus and System Devices CCU DT nodes to be also reset-providers. Signed-off-by:
-
Serge Semin authored
Baikal-T1 Clocks Control Unit is responsible for transformation of a signal coming from an external oscillator into clocks of various frequencies to propagate them then to the corresponding clocks consumers (either individual IP-blocks or clock domains). In order to create a set of high-frequency clocks the external signal is firstly handled by the embedded into CCU PLLs. So the corresponding dts-node is just a normal clock-provider node with standard set of properties. Note as being part of the Baikal-T1 System Controller its DT node is supposed to be a child the system controller node. Signed-off-by:
-
- 29 May, 2020 10 commits
-
-
Weiyi Lu authored
When some new clock supports are introduced, e.g. [1] it might lead to an error although it should be NULL because clk_init_data is on the stack and it might have random values if using without initialization. Add the missing initial value to clk_init_data. [1] https://android-review.googlesource.com/c/kernel/common/+/1278046 Fixes: a3ae5499 ("clk: mediatek: Add new clkmux register API") Signed-off-by:
Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-by:
Matthias Brugger <matthias.bgg@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1590560749-29136-1-git-send-email-weiyi.lu@mediatek.comSigned-off-by:
-
Owen Chen authored
Add MT6765 clock support, include topckgen, apmixedsys, infracfg, mcucfg and subsystem clocks. Signed-off-by:
Owen Chen <owen.chen@mediatek.com> Signed-off-by:
Mars Cheng <mars.cheng@mediatek.com> Signed-off-by:
Macpaul Lin <macpaul.lin@mediatek.com> Link: https://lore.kernel.org/r/1582278742-1626-6-git-send-email-macpaul.lin@mediatek.comSigned-off-by:
-
Mars Cheng authored
Add MT6765 clock dt-bindings, include topckgen, apmixedsys, infracfg, mcucfg and subsystem clocks. Signed-off-by:
-
Macpaul Lin authored
This patch adds the binding documentation for vcodecsys. Signed-off-by:
-
Macpaul Lin authored
This patch adds the binding documentation for mipi0a. Signed-off-by:
-
Macpaul Lin authored
This patch adds the binding documentation for apmixedsys, audsys, camsys, imgsys, infracfg, mmsys, pericfg, topckgen Signed-off-by:
-
Eugeniy Paltsev authored
Add support for 148.5MHz clock for HDMI PLL Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Link: https://lkml.kernel.org/r/20200311134115.13257-4-Eugeniy.Paltsev@synopsys.comSigned-off-by:
-
Eugeniy Paltsev authored
Support setting PLL to bypass mode to support output frequency equal to input one. Signed-off-by:
-
Eugeniy Paltsev authored
If PLL is bypassed the EN (enable) bit has no effect on output clock. Signed-off-by:
-
Mike Looijmans authored
Add support for the Si5342, Si5344 and Si5345 chips. These are equivalent to the Si5341 family, but with more clock input options (which are not supported yet by this driver). Signed-off-by:
Mike Looijmans <mike.looijmans@topic.nl> Link: https://lkml.kernel.org/r/20200507061544.11388-1-mike.looijmans@topic.nlAcked-by:
-
- 28 May, 2020 18 commits
-
-
Jeffrey Hugo authored
ufs_unipro_core_clk_src is required to allow UFS to clock scale for power savings. Fixes: b5f5f525 ("clk: qcom: Add MSM8998 Global Clock Control (GCC) driver") Signed-off-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20200528142205.44003-1-jeffrey.l.hugo@gmail.comSigned-off-by:
-
Stephen Boyd authored
This device id table is passed to of_match_node() later on in probe, but on CONFIG_OF=n builds of_match_node() doesn't do anything with the arguments. Lets just mark the table unused so that the compiler doesn't complain about this. drivers/clk/ingenic/tcu.c:326:34: warning: unused variable 'ingenic_tcu_of_match' [-Wunused-const-variable] static const struct of_device_id ingenic_tcu_of_match[] __initconst = { ^ 1 warning generated. Reported-by:kbuild test robot <lkp@intel.com> Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
1.The SSI clock of X1000 not like JZ4770 and JZ4780, they are not directly derived from the output of SSIPLL, but from the clock obtained by dividing the frequency by 2. "X1000_CLK_SSIPLL_DIV2" is added for this purpose, and ensure that it initialized before "X1000_CLK_SSIMUX" when initializing the clocks. 2.Clocks of LCD, OTG, EMC, EFUSE, OST, TCU, and gates of CPU, PCLK are also added. 3.Use "CLK_OF_DECLARE_DRIVER" like the other CGU drivers. Signed-off-by:
周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Reviewed-by:
Paul Cercueil <paul@crapouillou.net> Link: https://lkml.kernel.org/r/20200528031549.13846-8-zhouyanjie@wanyeetech.comSigned-off-by:
-
周琰杰 (Zhou Yanjie) authored
1.The SSI clock of X1000 not like JZ4770 and JZ4780, they are not directly derived from the output of SSIPLL, but from the clock obtained by dividing the frequency by 2. "X1000_CLK_SSIPLL_DIV2" is added for this purpose, it must between "X1000_CLK_SSIPLL" and "X1000_CLK_SSIMUX", otherwise an error will occurs when initializing the clock. These ABIs are only used for X1000, and I'm sure that no other devicetree out there is using these ABIs, so we should be able to reorder them. 2.Clocks of LCD, OTG, EMC, EFUSE, OST, TCU are also added. Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
Add support for the clocks provided by the CGU in the Ingenic X1830 SoC, making use of the cgu code to do the heavy lifting. Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
Add the clock bindings for the X1830 Soc from Ingenic. Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
The PLL of X1830 Soc from Ingenic has been greatly changed, the bypass control is placed in another register, so now two registers may needed to control the PLL. To this end, a new "bypass_reg" was introduced. In addition, when calculating rate, the PLL of X1830 introduced an extra 2x multiplier, so a new "rate_multiplier" was introduced. And adjust the code in jz47xx-cgu.c and x1000-cgu.c, make it to be compatible with the new cgu code. Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
It is not necessary to use spinlock when reading registers, so remove it from cgu.c. Suggested-by:
Paul Burton <paulburton@kernel.org> Signed-off-by:
-
Colin Ian King authored
The variable rate64 is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: https://lkml.kernel.org/r/20200528221219.535804-1-colin.king@canonical.comSigned-off-by:
-
Lubomir Rintel authored
This is a driver for a block that generates master and bit clocks for the I2S interface. It's separate from the PMUs that generate clocks for the peripherals. Signed-off-by:
-
Lubomir Rintel authored
This describes the bindings for a controller that generates master and bit clocks for the I2S interface. Signed-off-by:
-
Lubomir Rintel authored
Apart from the clocks and resets, the PMU hardware also controls power to peripherals that are on separate power islands. On MMP2, that's the GC860 GPU and the SSPA audio interface, while on MMP3 also the camera interface is on a separate island, along with the pair of GC2000 and GC300 GPUs and the SSPA. Signed-off-by:
-
Lubomir Rintel authored
On MMP2 the audio and GPU blocks are on separate power islands. On MMP3 the camera block's power is also controlled separately. Add the numbers that we could use to refer to the power domains for respective power islands from the device tree. Signed-off-by:
-
Lubomir Rintel authored
This is a binding for the MMP2 power management units. As such apart from providing the clocks, they also manage the power islands. Signed-off-by:
-
Lubomir Rintel authored
This clocks the Audio block. Signed-off-by:
-
Lubomir Rintel authored
A pair of fractional clock sources for PLLs and gates. Signed-off-by:
-
Lubomir Rintel authored
This is a trivial rename for a routine that registers more clock sources than the PLLs -- there's also a XO. Signed-off-by:
-
Lubomir Rintel authored
A trivial change to keep the sorting sane. The APBC registers are happier when they are grouped together, instead of mixed with the APMU ones. Signed-off-by:
-
