- 20 Nov, 2008 37 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'x86/numa' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: make NUMA on 32-bit depend on EXPERIMENTAL again x86, hibernate: fix breakage on x86_32 with CONFIG_NUMA set
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: more general identifier for Phoenix BIOS AMD IOMMU: check for next_bit also in unmapped area AMD IOMMU: fix fullflush comparison length AMD IOMMU: enable device isolation per default AMD IOMMU: add parameter to disable device isolation x86, PEBS/DS: fix code flow in ds_request() x86: add rdtsc barrier to TSC sync check xen: fix scrub_page() x86: fix es7000 compiling x86, bts: fix unlock problem in ds.c x86, voyager: fix smp generic helper voyager breakage x86: move iomap.h to the new include location
-
Randy Dunlap authored
Fix printk format warnings when CCISS_DEBUG is defined. drivers/block/cciss.c:2856: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' drivers/block/cciss.c:3205: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'long unsigned int' drivers/block/cciss.c:3236: warning: format '%x' expects type 'unsigned int', but argument 2 has type '__u64' drivers/block/cciss.c:3246: warning: format '%x' expects type 'unsigned int', but argument 2 has type '__u64' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Mike Miller <mike.miller@hp.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Stanley.Miao authored
OMAP LDP boot crash. This is because w1 subsystem changed the search interface, so update omap_hdq's search interface to follow the change. Signed-off-by:
Stanley.Miao <stanley.miao@windriver.com> Signed-off-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Mike Rapoport authored
One more error handling code should have kfree as well Signed-off-by:
Mike Rapoport <mike@compulab.co.il> Acked-by:
Eric Miao <eric.miao@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Li Zefan authored
Try this, and you'll get oops immediately: # cd Documentation/accounting/ # gcc -o getdelays getdelays.c # mount -t cgroup -o debug xxx /mnt # ./getdelays -C /mnt/tasks Because a normal file's dentry->d_fsdata is a pointer to struct cftype, not struct cgroup. After the patch, it returns EINVAL if we try to get cgroupstats from a normal file. Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Acked-by:
Paul Menage <menage@google.com> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x] Signed-off-by:
-
WANG Cong authored
fs/hostfs/hostfs_user.c defines do_readlink() as non-static, and so does fs/xfs/linux-2.6/xfs_ioctl.c when CONFIG_XFS_DEBUG=y. So rename do_readlink() in hostfs to hostfs_do_readlink(). I think it's better if XFS guys will also rename their do_readlink(), it's not necessary to use such a general name. Signed-off-by:
WANG Cong <wangcong@zeuux.org> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Vlada Peric authored
After commit a1d35a7a (cirrusfb: use modedb and add mode_option parameter), these variables are no longer used, so remove them to fix compilation warning. Signed-off-by:
Vlada Periæ <vlada.peric@gmail.com> Acked-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Rik van Riel authored
Fix the old comment on the scan ratio calculations. Signed-off-by:
Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Steven Rostedt authored
I find that I answer my email quicker on my home email account, than I do on my work email. Not to mention that I never check my work email while traveling. Please change my email address in the MAINTAINERS file from srostedt@redhat.com to rostedt@goodmis.org. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Henrik Rydberg authored
In order to analyze the SMC of the newer MacPros, applesmc needs to recognize the machine. This patch adds the missing generic dmi_match entry for MacPro models. Signed-off-by:
Henrik Rydberg <rydberg@euromail.se> Cc: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by:
-
Julia Lawall authored
Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Richard Purdie <rpurdie@linux.intel.com> Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by:
-
Hugh Dickins authored
Peter Cordes is sorry that he rm'ed his swapfiles while they were in use, he then had no pathname to swapoff. It's a curious little oversight, but not one worth a lot of hackery. Kudos to Willy Tarreau for turning this around from a discussion of synthetic pathnames to how to prevent unlink. Mimic immutable: prohibit unlinking an active swapfile in may_delete() (and don't worry my little head over the tiny race window). Signed-off-by:
Hugh Dickins <hugh@veritas.com> Cc: Willy Tarreau <w@1wt.eu> Acked-by:
Christoph Hellwig <hch@infradead.org> Cc: Peter Cordes <peter@cordes.ca> Cc: Bodo Eggert <7eggert@gmx.de> Cc: David Newall <davidn@davidnewall.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Hugh Dickins authored
In the past, GFP_NOFS (but of course not GFP_NOIO) was allowed to reclaim by writing to swap. That got partially broken in 2.6.23, when may_enter_fs initialization was moved up before the allocation of swap, so its PageSwapCache test was failing the first time around, Fix it by setting may_enter_fs when add_to_swap() succeeds with __GFP_IO. In fact, check __GFP_IO before calling add_to_swap(): allocating swap we're not ready to use just increases disk seeking. Signed-off-by:
-
Hugh Dickins authored
Page migration's writeout() has got understandably confused by the nasty AOP_WRITEPAGE_ACTIVATE case: as in normal success, a writepage() error has unlocked the page, so writeout() then needs to relock it. Signed-off-by:
-
Hugh Dickins authored
sprint_symbol(), itself used when dumping stacks, has been wasting 128 bytes of stack: lookup the symbol directly into the buffer supplied by the caller, instead of using a locally declared namebuf. I believe the name != buffer strcpy() is obsolete: the design here dates from when module symbol lookup pointed into a supposedly const but sadly volatile table; nowadays it copies, but an uncalled strcpy() looks better here than the risk of a recursive BUG_ON(). Signed-off-by:
-
KAMEZAWA Hiroyuki authored
As Balbir pointed out, memcg's pre_destroy handler has potential deadlock. It has following lock sequence. cgroup_mutex (cgroup_rmdir) -> pre_destroy -> mem_cgroup_pre_destroy-> force_empty -> cpu_hotplug.lock. (lru_add_drain_all-> schedule_work-> get_online_cpus) But, cpuset has following. cpu_hotplug.lock (call notifier) -> cgroup_mutex. (within notifier) Then, this lock sequence should be fixed. Considering how pre_destroy works, it's not necessary to holding cgroup_mutex() while calling it. As a side effect, we don't have to wait at this mutex while memcg's force_empty works.(it can be long when there are tons of pages.) Signed-off-by:KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by:
-
Glauber Costa authored
Current vmalloc restart search for a free area in case we can't find one. The reason is there are areas which are lazily freed, and could be possibly freed now. However, current implementation start searching the tree from the last failing address, which is pretty much by definition at the end of address space. So, we fail. The proposal of this patch is to restart the search from the beginning of the requested vstart address. This fixes the regression in running KVM virtual machines for me, described in http://lkml.org/lkml/2008/10/28/349, caused by commit db64fe02. Signed-off-by:
Glauber Costa <glommer@redhat.com> Signed-off-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Nick Piggin authored
An initial vmalloc failure should start off a synchronous flush of lazy areas, in case someone is in progress flushing them already, which could cause us to return an allocation failure even if there is plenty of KVA free. Signed-off-by:
-
Nick Piggin authored
Fix off by one bug in the KVA allocator that can leave gaps in the address space. Signed-off-by:
-
Miao Xie authored
After adding a node into the machine, top cpuset's mems isn't updated. By reviewing the code, we found that the update function cpuset_track_online_nodes() was invoked after node_states[N_ONLINE] changes. It is wrong because N_ONLINE just means node has pgdat, and if node has/added memory, we use N_HIGH_MEMORY. So, We should invoke the update function after node_states[N_HIGH_MEMORY] changes, just like its commit says. This patch fixes it. And we use notifier of memory hotplug instead of direct calling of cpuset_track_online_nodes(). Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Acked-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com Signed-off-by:
-
Michael Halcrow authored
I have received some reports of out-of-memory errors on some older AMD architectures. These errors are what I would expect to see if crypt_stat->key were split between two separate pages. eCryptfs should not assume that any of the memory sent through virt_to_scatterlist() is all contained in a single page, and so this patch allocates two scatterlist structs instead of one when processing keys. I have received confirmation from one person affected by this bug that this patch resolves the issue for him, and so I am submitting it for inclusion in a future stable release. Note that virt_to_scatterlist() runs sg_init_table() on the scatterlist structs passed to it, so the calls to sg_init_table() in decrypt_passphrase_encrypted_session_key() are redundant. Signed-off-by:
Michael Halcrow <mhalcrow@us.ibm.com> Reported-by:
Paulo J. S. Silva <pjssilva@ime.usp.br> Cc: "Leon Woestenberg" <leon.woestenberg@gmail.com> Cc: Tim Gardner <tim.gardner@canonical.com> Cc: <stable@kernel.org> Signed-off-by:
-
Andrea Paterniani authored
Fix unsafe order in dma mapping operation: always flush data from the cache *BEFORE* invalidating it, to allow full duplex transfers where the same buffer may be used for both writes and reads. Signed-off-by:
Andrea Paterniani <a.paterniani@swapp-eng.it> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Ben Dooks authored
The LCD driver core calls LCD drivers when either the blanking state or the display mode has changed, but does not make any check to see if the called driver has a .set_mode method. This means if a driver only has a .set_power method then the system will OOPS on changing mode (and with the console semaphore held so you cannot easily see the problem). Fix the problem by ensuring that either callback is valid before use. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Bruno Prémont authored
When unloading viafb module it does not remove it's /proc/viafb/ subtree which causes multiple viafb directories to appear below proc when mobprobing viafb and also lets kernel WARN() on duplicate proc entries: [ 145.458387] WARNING: at /usr/src/linux-2.6.28-rc3-git6/fs/proc/generic.c:551 proc_register+0xe6/0x160() [ 145.458945] proc_dir_entry '/proc/viafb' already registered [ 145.459278] Modules linked in: viafb(+) i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect snd_hda_intel snd_pcm snd_timer snd soundcore snd_page_alloc sg via_agp agpgart [last unloaded: drm] [ 145.460647] Pid: 1904, comm: modprobe Tainted: G W 2.6.28-rc3-git6 #4 [ 145.461064] Call Trace: [ 145.461248] [<c01066f1>] ? dump_stack+0x1/0x80 [ 145.461533] [<c01228a3>] warn_slowpath+0x63/0x80 [ 145.461851] [<c0253ec9>] ? idr_get_empty_slot+0xe9/0x250 [ 145.462186] [<c0254120>] ? ida_get_new_above+0xf0/0x150 [ 145.462528] [<c019fb86>] proc_register+0xe6/0x160 [ 145.462827] [<c019fdc6>] proc_mkdir_mode+0x36/0x50 [ 145.463135] [<c019fdef>] proc_mkdir+0xf/0x20 [ 145.463457] [<f807173c>] viafb_init+0x73c/0xc86 [viafb] [ 145.463823] [<f8071000>] ? viafb_init+0x0/0xc86 [viafb] [ 145.464147] [<c010111d>] do_one_initcall+0x2d/0x160 [ 145.464460] [<c01a6543>] ? sysfs_add_file+0x13/0x20 [ 145.464786] [<c015f031>] ? vfree+0x21/0x30 [ 145.465049] [<c01433b5>] ? load_module+0x1215/0x1500 [ 145.465381] [<c014e455>] ? __alloc_pages_internal+0x95/0x400 [ 145.465755] [<c0143723>] sys_init_module+0x83/0x1a0 [ 145.466065] [<c016ceed>] ? sys_read+0x3d/0x70 [ 145.466354] [<c0103bc1>] sysenter_do_call+0x12/0x25 [ 145.466653] ---[ end trace c84b37826e16748c ]--- Signed-off-by:
Bruno Prémont <bonbons@linux-vserver.org> Cc: <JosephChan@via.com.tw> Signed-off-by:
-
Ned Forrester authored
Fixes a data corruption bug in pxa2xx_spi.c when operating in full duplex mode with DMA and using buffers that overlap. SPI transmit and receive buffers are allowed to be the same or to overlap. However, this driver fails if such overlap is attempted in DMA mode because it maps the rx and tx buffers in the wrong order. By mapping DMA_FROM_DEVICE (read) before DMA_TO_DEVICE (write), it invalidates the cache before flushing it, thus discarding data which should have been transmitted. The patch corrects the order of mapping. This bug exists in all versions of pxa2xx_spi.c; similar bugs are in the drivers for two other SPI controllers (au1500, imx). A version of this patch has been tested on kernel 2.6.20 using verification of loopback data with: random transfer length, random bits-per-word, random positive offsets (both larger and smaller than transfer length) between the start of the rx and tx buffers, and varying clock rates. Signed-off-by:
Ned Forrester <nforrester@whoi.edu> Cc: Vernon Sauder <vernoninhand@gmail.com> Cc: J. Scott Merritt <merrij3@rpi.edu> Signed-off-by:
-
Arjan van de Ven authored
kunmap() takes as argument the struct page that orginally got kmap()'d, however the sg_miter_stop() function passed it the kernel virtual address instead, resulting in weird stuff. Somehow I ended up fixing this bug by accident while looking for a bug in the same area. Reported-by: kerneloops.org Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: <stable@kernel.org> [2.6.27.x] Signed-off-by:
-
Dmitry Baryshkov authored
Restore support for compiling tmiofb with acceleration disabled. Signed-off-by:
Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Jack Steiner authored
Enable -D DEBUG in the GRU Makefile if CONFIG_SGI_GRU_DEBUG is selected. Signed-off-by:
Jack Steiner <steiner@sgi.com> Signed-off-by:
-
Jarkko Nikula authored
There are already various drivers having bigger label than 12 bytes. Most of them fit well under 20 bytes but make column width exact so that oversized labels don't mess up output alignment. Signed-off-by:
Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by:
David Brownell <david-b@pacbell.net> Cc: <stable@kernel.org> [2.6.26.x, 2.6.26.x, 2.6.27.x] Signed-off-by:
-
Randy Dunlap authored
Add "min_addr" documentation. For "max_addr", add nn before [KMG] since a number is needed and this is consistent with other uses of [KMG]. Signed-off-by:
-
David Miller authored
This adds the sparc syscall hookups. Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by:
-
Ulrich Drepper authored
Introduce a new accept4() system call. The addition of this system call matches analogous changes in 2.6.27 (dup3(), evenfd2(), signalfd4(), inotify_init1(), epoll_create1(), pipe2()) which added new system calls that differed from analogous traditional system calls in adding a flags argument that can be used to access additional functionality. The accept4() system call is exactly the same as accept(), except that it adds a flags bit-mask argument. Two flags are initially implemented. (Most of the new system calls in 2.6.27 also had both of these flags.) SOCK_CLOEXEC causes the close-on-exec (FD_CLOEXEC) flag to be enabled for the new file descriptor returned by accept4(). This is a useful security feature to avoid leaking information in a multithreaded program where one thread is doing an accept() at the same time as another thread is doing a fork() plus exec(). More details here: http://udrepper.livejournal.com/20407.html "Secure File Descriptor Handling", Ulrich Drepper). The other flag is SOCK_NONBLOCK, which causes the O_NONBLOCK flag to be enabled on the new open file description created by accept4(). (This flag is merely a convenience, saving the use of additional calls fcntl(F_GETFL) and fcntl (F_SETFL) to achieve the same result. Here's a test program. Works on x86-32. Should work on x86-64, but I (mtk) don't have a system to hand to test with. It tests accept4() with each of the four possible combinations of SOCK_CLOEXEC and SOCK_NONBLOCK set/clear in 'flags', and verifies that the appropriate flags are set on the file descriptor/open file description returned by accept4(). I tested Ulrich's patch in this thread by applying against 2.6.28-rc2, and it passes according to my test program. /* test_accept4.c Copyright (C) 2008, Linux Foundation, written by Michael Kerrisk <mtk.manpages@gmail.com> Licensed under the GNU GPLv2 or later. */ #define _GNU_SOURCE #include <unistd.h> #include <sys/syscall.h> #include <sys/socket.h> #include <netinet/in.h> #include <stdlib.h> #include <fcntl.h> #include <stdio.h> #include <string.h> #define PORT_NUM 33333 #define die(msg) do { perror(msg); exit(EXIT_FAILURE); } while (0) /**********************************************************************/ /* The following is what we need until glibc gets a wrapper for accept4() */ /* Flags for socket(), socketpair(), accept4() */ #ifndef SOCK_CLOEXEC #define SOCK_CLOEXEC O_CLOEXEC #endif #ifndef SOCK_NONBLOCK #define SOCK_NONBLOCK O_NONBLOCK #endif #ifdef __x86_64__ #define SYS_accept4 288 #elif __i386__ #define USE_SOCKETCALL 1 #define SYS_ACCEPT4 18 #else #error "Sorry -- don't know the syscall # on this architecture" #endif static int accept4(int fd, struct sockaddr *sockaddr, socklen_t *addrlen, int flags) { printf("Calling accept4(): flags = %x", flags); if (flags != 0) { printf(" ("); if (flags & SOCK_CLOEXEC) printf("SOCK_CLOEXEC"); if ((flags & SOCK_CLOEXEC) && (flags & SOCK_NONBLOCK)) printf(" "); if (flags & SOCK_NONBLOCK) printf("SOCK_NONBLOCK"); printf(")"); } printf("\n"); #if USE_SOCKETCALL long args[6]; args[0] = fd; args[1] = (long) sockaddr; args[2] = (long) addrlen; args[3] = flags; return syscall(SYS_socketcall, SYS_ACCEPT4, args); #else return syscall(SYS_accept4, fd, sockaddr, addrlen, flags); #endif } /**********************************************************************/ static int do_test(int lfd, struct sockaddr_in *conn_addr, int closeonexec_flag, int nonblock_flag) { int connfd, acceptfd; int fdf, flf, fdf_pass, flf_pass; struct sockaddr_in claddr; socklen_t addrlen; printf("=======================================\n"); connfd = socket(AF_INET, SOCK_STREAM, 0); if (connfd == -1) die("socket"); if (connect(connfd, (struct sockaddr *) conn_addr, sizeof(struct sockaddr_in)) == -1) die("connect"); addrlen = sizeof(struct sockaddr_in); acceptfd = accept4(lfd, (struct sockaddr *) &claddr, &addrlen, closeonexec_flag | nonblock_flag); if (acceptfd == -1) { perror("accept4()"); close(connfd); return 0; } fdf = fcntl(acceptfd, F_GETFD); if (fdf == -1) die("fcntl:F_GETFD"); fdf_pass = ((fdf & FD_CLOEXEC) != 0) == ((closeonexec_flag & SOCK_CLOEXEC) != 0); printf("Close-on-exec flag is %sset (%s); ", (fdf & FD_CLOEXEC) ? "" : "not ", fdf_pass ? "OK" : "failed"); flf = fcntl(acceptfd, F_GETFL); if (flf == -1) die("fcntl:F_GETFD"); flf_pass = ((flf & O_NONBLOCK) != 0) == ((nonblock_flag & SOCK_NONBLOCK) !=0); printf("nonblock flag is %sset (%s)\n", (flf & O_NONBLOCK) ? "" : "not ", flf_pass ? "OK" : "failed"); close(acceptfd); close(connfd); printf("Test result: %s\n", (fdf_pass && flf_pass) ? "PASS" : "FAIL"); return fdf_pass && flf_pass; } static int create_listening_socket(int port_num) { struct sockaddr_in svaddr; int lfd; int optval; memset(&svaddr, 0, sizeof(struct sockaddr_in)); svaddr.sin_family = AF_INET; svaddr.sin_addr.s_addr = htonl(INADDR_ANY); svaddr.sin_port = htons(port_num); lfd = socket(AF_INET, SOCK_STREAM, 0); if (lfd == -1) die("socket"); optval = 1; if (setsockopt(lfd, SOL_SOCKET, SO_REUSEADDR, &optval, sizeof(optval)) == -1) die("setsockopt"); if (bind(lfd, (struct sockaddr *) &svaddr, sizeof(struct sockaddr_in)) == -1) die("bind"); if (listen(lfd, 5) == -1) die("listen"); return lfd; } int main(int argc, char *argv[]) { struct sockaddr_in conn_addr; int lfd; int port_num; int passed; passed = 1; port_num = (argc > 1) ? atoi(argv[1]) : PORT_NUM; memset(&conn_addr, 0, sizeof(struct sockaddr_in)); conn_addr.sin_family = AF_INET; conn_addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK); conn_addr.sin_port = htons(port_num); lfd = create_listening_socket(port_num); if (!do_test(lfd, &conn_addr, 0, 0)) passed = 0; if (!do_test(lfd, &conn_addr, SOCK_CLOEXEC, 0)) passed = 0; if (!do_test(lfd, &conn_addr, 0, SOCK_NONBLOCK)) passed = 0; if (!do_test(lfd, &conn_addr, SOCK_CLOEXEC, SOCK_NONBLOCK)) passed = 0; close(lfd); exit(passed ? EXIT_SUCCESS : EXIT_FAILURE); } [mtk.manpages@gmail.com: rewrote changelog, updated test program] Signed-off-by:
Ulrich Drepper <drepper@redhat.com> Tested-by:
Michael Kerrisk <mtk.manpages@gmail.com> Acked-by:
-
Clemens Ladisch authored
When booting in a direct color mode, the penguin has dirty feet, i.e., some pixels have the wrong color. This is caused by fb_set_logo_directpalette() which does not initialize the last 32 palette entries. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: <stable@kernel.org> Signed-off-by:
-
Nadia Derbey authored
A problem was found while reviewing the code after Bugzilla bug http://bugzilla.kernel.org/show_bug.cgi?id=11796. In ipc_addid(), the newly allocated ipc structure is inserted into the ipcs tree (i.e made visible to readers) without locking it. This is not correct since its initialization continues after it has been inserted in the tree. This patch moves the ipc structure lock initialization + locking before the actual insertion. Signed-off-by:
Nadia Derbey <Nadia.Derbey@bull.net> Reported-by:
Clement Calmels <cboulte@gmail.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@kernel.org> [2.6.27.x] Signed-off-by:
-
Julien Brunel authored
The error test that follows the call to backlight_device_register semms not to concern the right variable. A simplified version of the semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @def0@ expression x; position p0; @@ x@p0 = backlight_device_register(...) @protected@ expression def0.x,E; position def0.p0; position p; statement S; @@ x@p0 ... when != x = E if (!IS_ERR(x) && ...) {<... x@p ...>} else S @unprotected@ expression def0.x; identifier fld; position def0.p0; position p != protected.p; @@ x@p0 ... when != x = E * x@p->fld // </smpl> Signed-off-by:
Julien Brunel <brunel@diku.dk> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Henrik Rydberg authored
Add temperature sensor support for iMac 6. Signed-off-by:
Caleb Hyde <caleb.hyde@gmail.com> Signed-off-by:
-
- 18 Nov, 2008 3 commits
-
-
Mike Frysinger authored
Signed-off-by:
Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: hold extra reference to bio in blk_rq_map_user_iov() relay: fix cpu offline problem Release old elevator on change elevator block: fix boot failure with CONFIG_DEBUG_BLOCK_EXT_DEVT=y and nash block/md: fix md autodetection block: make add_partition() return pointer to hd_struct block: fix add_partition() error path
-
Arjan van de Ven authored
By using WARN(), kerneloops.org can collect which component is causing the delay and make statistics about that. suspend_test_finish() is currently the number 2 item but unless we can collect who's causing it we're not going to be able to fix the hot topic ones.. Signed-off-by:
-
