- 29 Apr, 2021 15 commits
-
-
Melissa Wen authored
Add support to overlay plane, in addition to primary and cursor planes. In this approach, the plane composition still requires an active primary plane and planes are composed associatively in the order: (primary <- overlay) <- cursor It enables to run the following IGT tests successfully: - kms_plane_cursor: - pipe-A-[overlay, primary, viewport]-size-[64, 128, 256] - kms_atomic: - plane-overlay-legacy and preserves the successful execution of kms_cursor_crc, kms_writeback and kms_flip Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/8261bf93d8a0e3ffaf81d8e7c9b3e9c229116be3.1619250933.git.melissa.srw@gmail.com
-
Melissa Wen authored
Add support for composing XRGB888 planes in addition to the ARGB8888 format. In the case of an XRGB plane at the top, the composition consists of copying the RGB values of a pixel from src to dst and clearing alpha channel, without the need for alpha blending operations for each pixel. Blend equations assume a completely opaque background, i.e., primary plane is not cleared before pixel blending but alpha channel is explicitly opaque (a = 0xff). Also, there is room for performance evaluation in switching pixel blend operation according to the plane format. v4: - clear alpha channel (0xff) after blend color values by pixel - improve comments on blend ops to reflect the current state - describe in the commit message future improvements for plane composition Signed-off-by:
-
Melissa Wen authored
Generalize variables and function names used for planes composition (from cursor to plane), since we will reuse the operations for both cursor and overlay types. No functional change. v4: - use better names for functions of plane composition (Daniel) Signed-off-by:
-
Melissa Wen authored
By using drmm_universal_plane_alloc instead of drm_universal_plane_init, we let the DRM infrastructure handles resource allocation and cleanup. We can also get rid of some code repetitions for plane cleanup, improving code maintainability in vkms. Signed-off-by:
-
Thomas Zimmermann authored
Struct drm_device.pdev is being moved to legacy status as only legacy DRM drivers use it. A possible follow-up patchset could remove pdev entirely. v4: * rebased Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210429105101.25667-6-tzimmermann@suse.de
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Don't assign it. Users should upcast from struct drm_device.dev. v6: * also fix the assignment in selftests in this patch (Chris) Signed-off-by:
-
Thomas Zimmermann authored
References to struct drm_device.pdev should not be used any longer as the field will be moved into the struct's legacy section. Fix a rsp comment. v8: * fix commit message (Michael) Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210429105101.25667-4-tzimmermann@suse.de
-
Thomas Zimmermann authored
References to struct drm_device.pdev should not be used any longer as the field will be moved into the struct's legacy section. Add a fix for the rsp commit. v8: * fix commit message (Michael) Signed-off-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Upcast with to_pci_dev() from struct drm_device.dev to get the PCI device structure. v9: * fix remaining pdev references Signed-off-by:
-
Deepak R Varma authored
idr_init() uses base 0 which is an invalid identifier for this driver. The idr_alloc for this driver uses 1 as start value for ID range. The new function idr_init_base allows IDR to set the ID lookup from base 1. This avoids all lookups that otherwise starts from 0 since 0 is always unused / available. References: commit 6ce711f2 ("idr: Make 1-based IDRs more efficient") Signed-off-by:
Deepak R Varma <mh12gx2825@gmail.com> Signed-off-by:
Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201105190718.GA89863@localhost
-
Bernard Zhao authored
Use min_t to replace min, min_t is a bit fast because min use twice typeof. This patch also fix check_patch.pl warning: WARNING: min() should probably be min_t(unsigned long, num_pages, VMW_PPN_PER_REMAP) +unsigned long nr = min(num_pages, (unsigned long) VMW_PPN_PER_REMAP); Signed-off-by:
Bernard Zhao <bernard@vivo.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Zheng Yongjun authored
Replace a comma between expression statements by a semicolon. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
-
Zou Wei authored
Suppresses the following coccinelle warning: drivers/gpu/drm/vmwgfx/vmwgfx_validation.c:85:15-22: WARNING use flexible-array member instead Signed-off-by:
Zou Wei <zou_wei@huawei.com> Signed-off-by:
-
Bhaskar Chowdhury authored
s/particuar/particular/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
-
Dan Carpenter authored
Cppcheck complains that the declaration doesn't match the function definition. Obviously "left" should come before "right". The caller and the function implementation are done this way, it's just the declaration which is wrong so this doesn't affect runtime. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/YH/720FD978TPhHp@mwanda
-
- 28 Apr, 2021 2 commits
-
-
Hsin-Yi Wang authored
>From anx7625 spec, the delay between powering on power supplies and gpio should be larger than 10ms. Fixes: 6c744983 ("drm/bridge: anx7625: disable regulators when power off") Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210428115116.931328-1-hsinyi@chromium.org
-
Randy Dunlap authored
Insert a missing word "power" in Kconfig help text. Fixes: 6aa19269 ("drm/bridge: Add Analogix anx6345 support") Signed-off-by:
-
- 27 Apr, 2021 23 commits
-
-
Lyude Paul authored
And finally, convert all of the code in drm_dp_mst_topology.c over to using drm_err() and drm_dbg*(). Note that this refactor would have been a lot more complicated to have tried writing a coccinelle script for, so this whole thing was done by hand. v2: * Fix line-wrapping in drm_dp_mst_atomic_check_mstb_bw_limit() Signed-off-by:
Lyude Paul <lyude@redhat.com> Cc: Robert Foss <robert.foss@linaro.org> Reviewed-by:
Dave Airlie <airlied@redhat.com>
-
Lyude Paul authored
Next step in the conversion, move everything in drm_dp_dual_mode_helper.c over to using drm_err() and drm_dbg_kms(). This was done using the following cocci script: @@ expression list expr; @@ ( - DRM_DEBUG_KMS(expr); + drm_dbg_kms(dev, expr); | - DRM_ERROR(expr); + drm_err(dev, expr); ) And correcting the indentation of the resulting code by hand. Signed-off-by:
-
Lyude Paul authored
Now that we've added a back-pointer to drm_device to drm_dp_aux, made drm_dp_aux available to any functions in drm_dp_helper.c which need to print to the kernel log, and ensured all of our logging uses a consistent format, let's do the final step of the conversion and actually move everything over to using drm_err() and drm_dbg_*(). This was done by using the following cocci script: @@ expression list expr; @@ ( - DRM_DEBUG_KMS(expr); + drm_dbg_kms(aux->drm_dev, expr); | - DRM_DEBUG_DP(expr); + drm_dbg_dp(aux->drm_dev, expr); | - DRM_DEBUG_ATOMIC(expr); + drm_dbg_atomic(aux->drm_dev, expr); | - DRM_DEBUG_KMS_RATELIMITED(expr); + drm_dbg_kms_ratelimited(aux->drm_dev, expr); | - DRM_ERROR(expr); + drm_err(aux->drm_dev, expr); ) Followed by correcting the resulting line-wrapping in the results by hand. v2: * Fix indenting in drm_dp_dump_access Signed-off-by:
-
Lyude Paul authored
While this shouldn't really be something that happens all that often, since we're going to be using the drm_dbg_* log helpers in DRM helpers it's technically possible that a driver could use an AUX adapter before it's been associated with it's respective drm_device. While drivers should take care to avoid this, there's likely going to be situations where it's difficult to workaround. And since other logging helpers in the kernel tend to be OK with NULL pointers (for instance, passing a NULL pointer to a "%s" argument for a printk-like function in the kernel doesn't break anything), we should do the same for ours. Signed-off-by:
-
Lyude Paul authored
Since this is one of the few functions in drm_dp_mst_topology.c that doesn't have any way of getting access to a drm_device, let's pass the drm_dp_mst_topology_mgr down to this function so that it can use drm_dbg_kms(). Signed-off-by:
-
Lyude Paul authored
So that we can start using drm_dbg_*() throughout the DRM DP helpers. Signed-off-by:
-
Lyude Paul authored
Another function to pass drm_device * down to so we can start using the drm_dbg_*() in the DRM DP helpers. Signed-off-by:
-
Lyude Paul authored
Another function we need to pass drm_device down to in order to start using drm_dbg_*(). Signed-off-by:
-
Lyude Paul authored
Another function that we'll need to pass a drm_device (and not drm_dp_aux) down to so that we can move over to using drm_dbg_*(). Signed-off-by:
-
Lyude Paul authored
Since we're about to be using drm_dbg_*() throughout the DP helpers, we'll need to be able to access the DRM device in the dual mode DP helpers as well. Note however that since drm_dp_dual_mode_detect() can be called with DDC adapters that aren't part of a drm_dp_aux struct, we need to pass down the drm_device to these functions instead of using drm_dp_aux. Signed-off-by:
-
Lyude Paul authored
Since we're about to convert everything in drm_dp_helper.c over to using drm_dbg_*(), let's also make our logging more consistent in drm_dp_helper.c while we're at it to ensure that we always print the name of the AUX channel in question. Signed-off-by:
-
Lyude Paul authored
So that we can start using drm_dbg_*() for drm_dp_link_train_channel_eq_delay() and drm_dp_lttpr_link_train_channel_eq_delay(). Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-7-lyude@redhat.comReviewed-by:
-
Lyude Paul authored
So that we can start using drm_dbg_*() in drm_dp_link_train_clock_recovery_delay(). Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-6-lyude@redhat.comReviewed-by:
-
Lyude Paul authored
The docs we had for drm_dp_aux_init() and drm_dp_aux_register() were mostly correct, except for the fact that they made the assumption that all AUX devices were grandchildren of their respective DRM devices. This is the case for most normal GPUs, but is almost never the case with SoCs and display bridges. So, let's fix this documentation to clarify when the right time to use drm_dp_aux_init() or drm_dp_aux_register() is. Signed-off-by:
-
Lyude Paul authored
This is something that we've wanted for a while now: the ability to actually look up the respective drm_device for a given drm_dp_aux struct. This will also allow us to transition over to using the drm_dbg_*() helpers for debug message printing, as we'll finally have a drm_device to reference for doing so. Note that there is one limitation with this - because some DP AUX adapters exist as platform devices which are initialized independently of their respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be non-NULL until drm_dp_aux_register() has been called. We make sure to point this out in the documentation for struct drm_dp_aux. v3: * Add WARN_ON_ONCE() to drm_dp_aux_register() if drm_dev isn't filled out Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-4-lyude@redhat.comReviewed-by:
-
Lyude Paul authored
Since AUX adapters on nouveau have their respective DRM connectors as parents, we need to make sure that we register then after their connectors. Signed-off-by:
-
Lyude Paul authored
Just adds some missing calls to drm_dp_aux_register()/drm_dp_aux_unregister() for when we attach/detach the bridge. Signed-off-by:
-
Fabio M. De Francesco authored
drm_send_event_helper() has not prototype, it has internal linkage and therefore it should be defined with storage class 'static'. Signed-off-by:
Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by:
-
Takashi Iwai authored
On bochs DRM driver, the execution of "setterm --blank force" results in a frozen screen instead of a blank screen. It's due to the lack of the screen blanking support in its code. Actually, the QEMU bochs vga side can switch to the blanking mode when the bit 0x20 is cleared on VGA_ATT_IW register (0x3c0), which updates ar_index in QEMU side. So, essentially, we'd just need to clear the bit at pipe disable callback; that's what this patch does essentially. However, a tricky part is that the access via VGA_ATT_IW is done in "flip-flop"; the first write is for index and the second write is for the data like palette. Meanwhile, in the current bochs DRM driver, the flip-flop wasn't considered, and it calls only the register update once with the value 0x20. The spec and the actual VGA implementation in QEMU suggests that the flip flop flag is discarded by reading the CRTC index register (VGA_IS1_RC, 0x3da). So, in this patch, we add the helper to read a byte and the call to clear the flip flop flag before changing the blank / unblank setup via VGA_ATT_IW register. v1->v2: * discard ar_flip_flop by reading 0x3da, add bochs_vga_readb() * include video/vga.h for VGA register definitions * move the blank/unblank code to bochs_hw_blank() Signed-off-by:
Takashi Iwai <tiwai@suse.de> Acked-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
KuoHsiang Chou authored
[Bug][DP501] If ASPEED P2A (PCI to AHB) bridge is disabled and disallowed for CVE_2019_6260 item3, and then the monitor's EDID is unable read through Parade DP501. The reason is the DP501's FW is mapped to BMC addressing space rather than Host addressing space. The resolution is that using "pci_iomap_range()" maps to DP501's FW that stored on the end of FB (Frame Buffer). In this case, FrameBuffer reserves the last 2MB used for the image of DP501. Signed-off-by:
KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Reported-by:
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210421163157.50949-7-andriy.shevchenko@linux.intel.com
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
-
