- 29 Sep, 2020 12 commits
-
-
Alan Maguire authored
generalize the "seq_show" seq file support in btf.c to support a generic show callback of which we support two instances; the current seq file show, and a show with snprintf() behaviour which instead writes the type data to a supplied string. Both classes of show function call btf_type_show() with different targets; the seq file or the string to be written. In the string case we need to track additional data - length left in string to write and length to return that we would have written (a la snprintf). By default show will display type information, field members and their types and values etc, and the information is indented based upon structure depth. Zeroed fields are omitted. Show however supports flags which modify its behaviour: BTF_SHOW_COMPACT - suppress newline/indent. BTF_SHOW_NONAME - suppress show of type and member names. BTF_SHOW_PTR_RAW - do not obfuscate pointer values. BTF_SHOW_UNSAFE - do not copy data to safe buffer before display. BTF_SHOW_ZERO - show zeroed values (by default they are not shown). Signed-off-by:
Alan Maguire <alan.maguire@oracle.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/1601292670-1616-3-git-send-email-alan.maguire@oracle.com
-
Alan Maguire authored
It will be used later for BPF structure display support Signed-off-by:
-
Andrii Nakryiko authored
Add an ability to create an empty BTF object from scratch. This is going to be used by pahole for BTF encoding. And also by selftest for convenient creation of BTF objects. Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200926011357.2366158-7-andriin@fb.com
-
Andrii Nakryiko authored
Allow internal BTF representation to switch from default read-only mode, in which raw BTF data is a single non-modifiable block of memory with BTF header, types, and strings layed out sequentially and contiguously in memory, into a writable representation with types and strings data split out into separate memory regions, that can be dynamically expanded. Such writable internal representation is transparent to users of libbpf APIs, but allows to append new types and strings at the end of BTF, which is a typical use case when generating BTF programmatically. All the basic guarantees of BTF types and strings layout is preserved, i.e., user can get `struct btf_type *` pointer and read it directly. Such btf_type pointers might be invalidated if BTF is modified, so some care is required in such mixed read/write scenarios. Switch from read-only to writable configuration happens automatically the first time when user attempts to modify BTF by either adding a new type or new string. It is still possible to get raw BTF data, which is a single piece of memory that can be persisted in ELF section or into a file as raw BTF. Such raw data memory is also still owned by BTF and will be freed either when BTF object is freed or if another modification to BTF happens, as any modification invalidates BTF raw representation. This patch adds the first two BTF manipulation APIs: btf__add_str(), which allows to add arbitrary strings to BTF string section, and btf__find_str() which allows to find existing string offset, but not add it if it's missing. All the added strings are automatically deduplicated. This is achieved by maintaining an additional string lookup index for all unique strings. Such index is built when BTF is switched to modifiable mode. If at that time BTF strings section contained duplicate strings, they are not de-duplicated. This is done specifically to not modify the existing content of BTF (types, their string offsets, etc), which can cause confusion and is especially important property if there is struct btf_ext associated with struct btf. By following this "imperfect deduplication" process, btf_ext is kept consitent and correct. If deduplication of strings is necessary, it can be forced by doing BTF deduplication, at which point all the strings will be eagerly deduplicated and all string offsets both in struct btf and struct btf_ext will be updated. Signed-off-by:
-
Andrii Nakryiko authored
Calculating a hash of zero-terminated string is a common need when using hashmap, so extract it for reuse. Signed-off-by:
-
Andrii Nakryiko authored
Managing dynamically-sized array is a common, but not trivial functionality, which significant amount of logic and code to implement properly. So instead of re-implementing it all the time, extract it into a helper function ans reuse. Signed-off-by:
-
Andrii Nakryiko authored
Refactor internals of struct btf to remove assumptions that BTF header, type data, and string data are layed out contiguously in a memory in a single memory allocation. Now we have three separate pointers pointing to the start of each respective are: header, types, strings. In the next patches, these pointers will be re-assigned to point to independently allocated memory areas, if BTF needs to be modified. Signed-off-by:
-
Andrii Nakryiko authored
Refactor implementation of internal BTF type index to not use direct pointers. Instead it uses offset relative to the start of types data section. This allows for types data to be reallocatable, enabling implementation of modifiable BTF. As now getting type by ID has an extra indirection step, convert all internal type lookups to a new helper btf_type_id(), that returns non-const pointer to a type by its ID. Signed-off-by:
-
Toke Høiland-Jørgensen authored
The test_overhead prog_test included an fmod_ret program that attached to __set_task_comm() in the kernel. However, this function was never listed as allowed for return modification, so this only worked because of the verifier skipping tests when a trampoline already existed for the attach point. Now that the verifier checks have been fixed, remove fmod_ret from the test so it works again. Fixes: 4eaf0b5c ("selftest/bpf: Fmod_ret prog and implement test_overhead as part of bench") Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Toke Høiland-Jørgensen authored
The check_attach_btf_id() function really does three things: 1. It performs a bunch of checks on the program to ensure that the attachment is valid. 2. It stores a bunch of state about the attachment being requested in the verifier environment and struct bpf_prog objects. 3. It allocates a trampoline for the attachment. This patch splits out (1.) and (3.) into separate functions which will perform the checks, but return the computed values instead of directly modifying the environment. This is done in preparation for reusing the checks when the actual attachment is happening, which will allow tracing programs to have multiple (compatible) attachments. This also fixes a bug where a bunch of checks were skipped if a trampoline already existed for the tracing target. Fixes: 6ba43b76 ("bpf: Attachment verification for BPF_MODIFY_RETURN") Fixes: 1e6c62a8 ("bpf: Introduce sleepable BPF programs") Acked-by:
-
Toke Høiland-Jørgensen authored
In preparation for moving code around, change a bunch of references to env->log (and the verbose() logging helper) to use bpf_log() and a direct pointer to struct bpf_verifier_log. While we're touching the function signature, mark the 'prog' argument to bpf_check_type_match() as const. Also enhance the bpf_verifier_log_needed() check to handle NULL pointers for the log struct so we can re-use the code with logging disabled. Acked-by:
-
Toke Høiland-Jørgensen authored
From the checks and commit messages for modify_return, it seems it was never the intention that it should be possible to attach a tracing program with expected_attach_type == BPF_MODIFY_RETURN to another BPF program. However, check_attach_modify_return() will only look at the function name, so if the target function starts with "security_", the attach will be allowed even for bpf2bpf attachment. Fix this oversight by also blocking the modification if a target program is supplied. Fixes: 18644cec ("bpf: Fix use-after-free in fmod_ret check") Fixes: 6ba43b76 ("bpf: Attachment verification for BPF_MODIFY_RETURN") Acked-by:
-
- 28 Sep, 2020 10 commits
-
-
Alexei Starovoitov authored
Lorenz Bauer says: ==================== Changes in v2: - Check sk_fullsock in map_update_elem (Martin) Enable calling map_update_elem on sockmaps from bpf_iter context. This in turn allows us to copy a sockmap by iterating its elements. The change itself is tiny, all thanks to the ground work from Martin, whose series [1] this patch is based on. I updated the tests to do some copying, and also included two cleanups. I'm sending this out now rather than when Martin's series has landed because I hope this can get in before the merge window (potentially) closes this weekend. 1: https://lore.kernel.org/bpf/20200925000337.3853598-1-kafai@fb.com/ ==================== Signed-off-by:
-
Lorenz Bauer authored
Since we can now call map_update_elem(sockmap) from bpf_iter context it's possible to copy a sockmap or sockhash in the kernel. Add a selftest which exercises this. Signed-off-by:
Lorenz Bauer <lmb@cloudflare.com> Signed-off-by:
-
Lorenz Bauer authored
The shared header to define SOCKMAP_MAX_ENTRIES is a bit overkill. Dynamically allocate the sock_fd array based on bpf_map__max_entries instead. Suggested-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
-
Lorenz Bauer authored
We compare socket cookies to ensure that insertion into a sockmap worked. Pull this out into a helper function for use in other tests. Signed-off-by:
-
Lorenz Bauer authored
Allow passing a pointer to a BTF struct sock_common* when updating a sockmap or sockhash. Since BTF pointers can fault and therefore be NULL at runtime we need to add an additional !sk check to sock_map_update_elem. Since we may be passed a request or timewait socket we also need to check sk_fullsock. Doing this allows calling map_update_elem on sockmap from bpf_iter context, which uses BTF pointers. Signed-off-by:
-
Lorenzo Bianconi authored
Get rid of bpf_cpu_map_entry pointer in cpu_map_build_skb routine signature since it is no longer needed. Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/33cb9b7dc447de3ea6fd6ce713ac41bca8794423.1601292015.git.lorenzo@kernel.org
-
Song Liu authored
This test runs test_run for raw_tracepoint program. The test covers ctx input, retval output, and running on correct cpu. Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Song Liu authored
Add bpf_prog_test_run_opts() with support of new fields in bpf_attr.test, namely, flags and cpu. Also extend _opts operations to support outputs via opts. Signed-off-by:
-
Song Liu authored
Add .test_run for raw_tracepoint. Also, introduce a new feature that runs the target program on a specific CPU. This is achieved by a new flag in bpf_attr.test, BPF_F_TEST_RUN_ON_CPU. When this flag is set, the program is triggered on cpu with id bpf_attr.test.cpu. This feature is needed for BPF programs that handle perf_event and other percpu resources, as the program can access these resource locally. Signed-off-by:
-
Magnus Karlsson authored
Fix possible crash in socket_release when an out-of-memory error has occurred in the bind call. If a socket using the XDP_SHARED_UMEM flag encountered an error in xp_create_and_assign_umem, the bind code jumped to the exit routine but erroneously forgot to set the err value before jumping. This meant that the exit routine thought the setup went well and set the state of the socket to XSK_BOUND. The xsk socket release code will then, at application exit, think that this is a properly setup socket, when it is not, leading to a crash when all fields in the socket have in fact not been initialized properly. Fix this by setting the err variable in xsk_bind so that the socket is not set to XSK_BOUND which leads to the clean-up in xsk_release not being triggered. Fixes: 1c1efc2a ("xsk: Create and free buffer pool independently from umem") Reported-by: syzbot+ddc7b4944bc61da19b81@syzkaller.appspotmail.com Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
-
- 26 Sep, 2020 1 commit
-
-
John Fastabend authored
The meaning of PTR_TO_BTF_ID_OR_NULL differs slightly from other types denoted with the *_OR_NULL type. For example the types PTR_TO_SOCKET and PTR_TO_SOCKET_OR_NULL can be used for branch analysis because the type PTR_TO_SOCKET is guaranteed to _not_ have a null value. In contrast PTR_TO_BTF_ID and BTF_TO_BTF_ID_OR_NULL have slightly different meanings. A PTR_TO_BTF_TO_ID may be a pointer to NULL value, but it is safe to read this pointer in the program context because the program context will handle any faults. The fallout is for PTR_TO_BTF_ID the verifier can assume reads are safe, but can not use the type in branch analysis. Additionally, authors need to be extra careful when passing PTR_TO_BTF_ID into helpers. In general helpers consuming type PTR_TO_BTF_ID will need to assume it may be null. Seeing the above is not obvious to readers without the back knowledge lets add a comment in the type definition. Editorial comment, as networking and tracing programs get closer and more tightly merged we may need to consider a new type that we can ensure is non-null for branch analysis and also passing into helpers. Signed-off-by:
-
- 25 Sep, 2020 16 commits
-
-
John Fastabend authored
If we AND two values together that are known in the 32bit subregs, but not known in the 64bit registers we rely on the tnum value to report the 32bit subreg is known. And do not use mark_reg_known() directly from scalar32_min_max_and() Add an AND test to cover the case with known 32bit subreg, but unknown 64bit reg. Signed-off-by:
-
John Fastabend authored
In BPF_AND and BPF_OR alu cases we have this pattern when the src and dst tnum is a constant. 1 dst_reg->var_off = tnum_[op](dst_reg->var_off, src_reg.var_off) 2 scalar32_min_max_[op] 3 if (known) return 4 scalar_min_max_[op] 5 if (known) 6 __mark_reg_known(dst_reg, dst_reg->var_off.value [op] src_reg.var_off.value) The result is in 1 we calculate the var_off value and store it in the dst_reg. Then in 6 we duplicate this logic doing the op again on the value. The duplication comes from the the tnum_[op] handlers because they have already done the value calcuation. For example this is tnum_and(). struct tnum tnum_and(struct tnum a, struct tnum b) { u64 alpha, beta, v; alpha = a.value | a.mask; beta = b.value | b.mask; v = a.value & b.value; return TNUM(v, alpha & beta & ~v); } So lets remove the redundant op calculation. Its confusing for readers and unnecessary. Its also not harmful because those ops have the property, r1 & r1 = r1 and r1 | r1 = r1. Signed-off-by: -
Alexei Starovoitov authored
Martin KaFai Lau says: ==================== This set allows networking prog type to directly read fields from the in-kernel socket type, e.g. "struct tcp_sock". Patch 2 has the details on the use case. v3: - Pass arg_btf_id instead of fn into check_reg_type() in Patch 1 (Lorenz) - Move arg_btf_id from func_proto to struct bpf_reg_types in Patch 2 (Lorenz) - Remove test_sock_fields from .gitignore in Patch 8 (Andrii) - Add tests to have better coverage on the modified helpers (Alexei) Patch 13 is added. - Use "void *sk" as the helper argument in UAPI bpf.h v3: - ARG_PTR_TO_SOCK_COMMON_OR_NULL was attempted in v2. The _OR_NULL was needed because the PTR_TO_BTF_ID could be NULL but note that a could be NULL PTR_TO_BTF_ID is not a scalar NULL to the verifier. "_OR_NULL" implicitly gives an expectation that the helper can take a scalar NULL which does not make sense in most (except one) helpers. Passing scalar NULL should be rejected at the verification time. Thus, this patch uses ARG_PTR_TO_BTF_ID_SOCK_COMMON to specify that the helper can take both the btf-id ptr or the legacy PTR_TO_SOCK_COMMON but not scalar NULL. It requires the func_proto to explicitly specify the arg_btf_id such that there is a very clear expectation that the helper can handle a NULL PTR_TO_BTF_ID. v2: - Add ARG_PTR_TO_SOCK_COMMON_OR_NULL (Lorenz) ==================== Signed-off-by: -
Martin KaFai Lau authored
This patch attaches a classifier prog to the ingress filter. It exercises the following helpers with different socket pointer types in different logical branches: 1. bpf_sk_release() 2. bpf_sk_assign() 3. bpf_skc_to_tcp_request_sock(), bpf_skc_to_tcp_sock() 4. bpf_tcp_gen_syncookie, bpf_tcp_check_syncookie Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Martin KaFai Lau authored
The enum tcp_ca_state is available in <linux/tcp.h>. Remove it from the bpf_tcp_helpers.h to avoid conflict when the bpf prog needs to include both both <linux/tcp.h> and bpf_tcp_helpers.h. Modify the bpf_cubic.c and bpf_dctcp.c to use <linux/tcp.h> instead. The <linux/stddef.h> is needed by <linux/tcp.h>. Signed-off-by:
-
Martin KaFai Lau authored
This test uses bpf_skc_to_tcp_sock() to get a kernel tcp_sock ptr "ktp". Access the ktp->lsndtime and also pass ktp to bpf_sk_storage_get(). It also exercises the bpf_sk_cgroup_id() and bpf_sk_ancestor_cgroup_id() with the "ktp". To do that, a parent cgroup and a child cgroup are created. The bpf prog is attached to the child cgroup. Signed-off-by:
-
Martin KaFai Lau authored
This patch uses start_server() and connect_to_fd() from network_helpers.h to remove the network testing boiler plate codes. epoll is no longer needed also since the timeout has already been taken care of also. Signed-off-by:
-
Martin KaFai Lau authored
skel is used. Global variables are used to store the result from bpf prog. addr_map, sock_result_map, and tcp_sock_result_map are gone. Instead, global variables listen_tp, srv_sa6, cli_tp,, srv_tp, listen_sk, srv_sk, and cli_sk are added. Because of that, bpf_addr_array_idx and bpf_result_array_idx are also no longer needed. CHECK() macro from test_progs.h is reused and bail as soon as a CHECK failure. shutdown() is used to ensure the previous data-ack is received. The bytes_acked, bytes_received, and the pkt_out_cnt checks are using "<" to accommodate the final ack may not have been received/sent. It is enough since it is not the focus of this test. The sk local storage is all initialized to 0xeB9F now, so the check_sk_pkt_out_cnt() always checks with the 0xeB9F base. It is to keep things simple. The next patch will reuse helpers from network_helpers.h to simplify things further. Signed-off-by:
-
Martin KaFai Lau authored
This is a mechanical change to 1. move test_sock_fields.c to prog_tests/sock_fields.c 2. rename progs/test_sock_fields_kern.c to progs/test_sock_fields.c Minimal change is made to the code itself. Next patch will make changes to use new ways of writing test, e.g. use skel and global variables. Signed-off-by:
-
Martin KaFai Lau authored
The patch tests for: 1. bpf_sk_release() can be called on a tcp_sock btf_id ptr. 2. Ensure the tcp_sock btf_id pointer cannot be used after bpf_sk_release(). Signed-off-by:
-
Martin KaFai Lau authored
This patch changes the bpf_sk_assign() to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer returned by the bpf_skc_to_*() helpers also. The bpf_sk_lookup_assign() is taking ARG_PTR_TO_SOCKET_"OR_NULL". Meaning it specifically takes a literal NULL. ARG_PTR_TO_BTF_ID_SOCK_COMMON does not allow a literal NULL, so another ARG type is required for this purpose and another follow-up patch can be used if there is such need. Signed-off-by:
-
Martin KaFai Lau authored
This patch changes the bpf_tcp_*_syncookie() to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer returned by the bpf_skc_to_*() helpers also. Signed-off-by:
-
Martin KaFai Lau authored
This patch changes the bpf_sk_storage_*() to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer returned by the bpf_skc_to_*() helpers also. A micro benchmark has been done on a "cgroup_skb/egress" bpf program which does a bpf_sk_storage_get(). It was driven by netperf doing a 4096 connected UDP_STREAM test with 64bytes packet. The stats from "kernel.bpf_stats_enabled" shows no meaningful difference. The sk_storage_get_btf_proto, sk_storage_delete_btf_proto, btf_sk_storage_get_proto, and btf_sk_storage_delete_proto are no longer needed, so they are removed. Signed-off-by:
-
Martin KaFai Lau authored
The previous patch allows the networking bpf prog to use the bpf_skc_to_*() helpers to get a PTR_TO_BTF_ID socket pointer, e.g. "struct tcp_sock *". It allows the bpf prog to read all the fields of the tcp_sock. This patch changes the bpf_sk_release() and bpf_sk_*cgroup_id() to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer returned by the bpf_skc_to_*() helpers also. For example, the following will work: sk = bpf_skc_lookup_tcp(skb, tuple, tuplen, BPF_F_CURRENT_NETNS, 0); if (!sk) return; tp = bpf_skc_to_tcp_sock(sk); if (!tp) { bpf_sk_release(sk); return; } lsndtime = tp->lsndtime; /* Pass tp to bpf_sk_release() will also work */ bpf_sk_release(tp); Since PTR_TO_BTF_ID could be NULL, the helper taking ARG_PTR_TO_BTF_ID_SOCK_COMMON has to check for NULL at runtime. A btf_id of "struct sock" may not always mean a fullsock. Regardless the helper's running context may get a non-fullsock or not, considering fullsock check/handling is pretty cheap, it is better to keep the same verifier expectation on helper that takes ARG_PTR_TO_BTF_ID* will be able to handle the minisock situation. In the bpf_sk_*cgroup_id() case, it will try to get a fullsock by using sk_to_full_sk() as its skb variant bpf_sk"b"_*cgroup_id() has already been doing. bpf_sk_release can already handle minisock, so nothing special has to be done. Signed-off-by: -
Martin KaFai Lau authored
There is a constant need to add more fields into the bpf_tcp_sock for the bpf programs running at tc, sock_ops...etc. A current workaround could be to use bpf_probe_read_kernel(). However, other than making another helper call for reading each field and missing CO-RE, it is also not as intuitive to use as directly reading "tp->lsndtime" for example. While already having perfmon cap to do bpf_probe_read_kernel(), it will be much easier if the bpf prog can directly read from the tcp_sock. This patch tries to do that by using the existing casting-helpers bpf_skc_to_*() whose func_proto returns a btf_id. For example, the func_proto of bpf_skc_to_tcp_sock returns the btf_id of the kernel "struct tcp_sock". These helpers are also added to is_ptr_cast_function(). It ensures the returning reg (BPF_REF_0) will also carries the ref_obj_id. That will keep the ref-tracking works properly. The bpf_skc_to_* helpers are made available to most of the bpf prog types in filter.c. The bpf_skc_to_* helpers will be limited by perfmon cap. This patch adds a ARG_PTR_TO_BTF_ID_SOCK_COMMON. The helper accepting this arg can accept a btf-id-ptr (PTR_TO_BTF_ID + &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON]) or a legacy-ctx-convert-skc-ptr (PTR_TO_SOCK_COMMON). The bpf_skc_to_*() helpers are changed to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will accept pointer obtained from skb->sk. Instead of specifying both arg_type and arg_btf_id in the same func_proto which is how the current ARG_PTR_TO_BTF_ID does, the arg_btf_id of the new ARG_PTR_TO_BTF_ID_SOCK_COMMON is specified in the compatible_reg_types[] in verifier.c. The reason is the arg_btf_id is always the same. Discussion in this thread: https://lore.kernel.org/bpf/20200922070422.1917351-1-kafai@fb.com/ The ARG_PTR_TO_BTF_ID_ part gives a clear expectation that the helper is expecting a PTR_TO_BTF_ID which could be NULL. This is the same behavior as the existing helper taking ARG_PTR_TO_BTF_ID. The _SOCK_COMMON part means the helper is also expecting the legacy SOCK_COMMON pointer. By excluding the _OR_NULL part, the bpf prog cannot call helper with a literal NULL which doesn't make sense in most cases. e.g. bpf_skc_to_tcp_sock(NULL) will be rejected. All PTR_TO_*_OR_NULL reg has to do a NULL check first before passing into the helper or else the bpf prog will be rejected. This behavior is nothing new and consistent with the current expectation during bpf-prog-load. [ ARG_PTR_TO_BTF_ID_SOCK_COMMON will be used to replace ARG_PTR_TO_SOCK* of other existing helpers later such that those existing helpers can take the PTR_TO_BTF_ID returned by the bpf_skc_to_*() helpers. The only special case is bpf_sk_lookup_assign() which can accept a literal NULL ptr. It has to be handled specially in another follow up patch if there is a need (e.g. by renaming ARG_PTR_TO_SOCKET_OR_NULL to ARG_PTR_TO_BTF_ID_SOCK_COMMON_OR_NULL). ] [ When converting the older helpers that take ARG_PTR_TO_SOCK* in the later patch, if the kernel does not support BTF, ARG_PTR_TO_BTF_ID_SOCK_COMMON will behave like ARG_PTR_TO_SOCK_COMMON because no reg->type could have PTR_TO_BTF_ID in this case. It is not a concern for the newer-btf-only helper like the bpf_skc_to_*() here though because these helpers must require BTF vmlinux to begin with. ] Signed-off-by:
-
Martin KaFai Lau authored
check_reg_type() checks whether a reg can be used as an arg of a func_proto. For PTR_TO_BTF_ID, the check is actually not completely done until the reg->btf_id is pointing to a kernel struct that is acceptable by the func_proto. Thus, this patch moves the btf_id check into check_reg_type(). "arg_type" and "arg_btf_id" are passed to check_reg_type() instead of "compatible". The compatible_reg_types[] usage is localized in check_reg_type() now. The "if (!btf_id) verbose(...); " is also removed since it won't happen. Signed-off-by:
-
- 24 Sep, 2020 1 commit
-
-
Alexei Starovoitov authored
Merge branch 'rtt-speedup.2020.09.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into bpf-next Signed-off-by:
-
