IPA versions 3.0 and 3.1 support up to 8 resource groups.  There is
some interest in supporting these older versions of the hardware, so
update the resource configuration code to program resource limits
for these groups if specified.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The arrays of source and destination resource limits defined in
configuration data are of a fixed size--which is the maximum number
of resource groups supported for any platform.  Most platforms will
use fewer than that many groups.

Add new members to the ipa_rsrc_group_id enumerated type to define
the number of source and destination resource groups are defined for
the platform.  (This type is defined for each platform in its data
file.)

Add a new field to the resource configuration data that indicates
how many of the source and destination resource groups are actually
used for the platform, and initialize it with the count value.  This
allows us to determine the number of groups defined for the platform
without exposing the ipa_rsrc_group_id enumerated type.

As a result, we no longer need ipa_resource_group_src_count()
and ipa_resource_group_dst_count(), because each platform now
defines its supported number of resource groups.  So get rid of
those two functions.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass the resource data pointer to ipa_resource_config_src() and
ipa_resource_config_dst() to be used for configuring resource
limits.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ipa_resource_src and ipa_resource_dst structures are identical
in form, so just replace them with a single structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace IPA_RESOURCE_GROUP_SRC_MAX and IPA_RESOURCE_GROUP_DST_MAX
with a single symbol, IPA_RESOURCE_GROUP_MAX.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Most platforms have the same set of source and destination resource
types.  But some older platforms have some additional ones, and it's
possible different resources will be used in the future.

Move the definition of the ipa_resource_type enumerated type so it
is defined for each platform in its configuration data file.  This
permits each to have a distinct set of resources.

Shorten the data files slightly, by putting the min and max limit
values on the same line.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the type field from the ipa_resource_src and ipa_resource_dst
structures, and instead use that value as the index into the arrays
of source and destination resources.

Change ipa_resource_config_src() and ipa_resource_config_dst() so
the resource type is passed in as an argument.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Combine the ipa_resource_type_src and ipa_resource_type_dst
enumerated types into a single enumerated type, ipa_resource_type.

Assign value 0 to the first element for the source and destination
types, so their numeric values are preserved.  Add some additional
commentary where these are defined, stating explicitly that code
assumes the first source and first destination member must have
numeric value 0.

Fix the kerneldoc comments for the ipa_gsi_endpoint_data structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the SDM845 configuration data defines resource limits for
the first two resource groups (for both source and destination
resource types).  The hardware supports additional resource groups,
and we should program the resource limits for those groups as well.

Even the "unused" destination resource group (number 2) should have
non-zero limits programmed in some cases, to ensure correct operation.

Add these missing resource group limit definitions to the SDM845
configuration data.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Define a new ipa_resource_group_id enumerated type, whose members
have numeric values that match the resource group number used when
programming the hardware.  Each platform supports a different number
of source and destination resource groups, so define the type
separately for each platform in its configuration data file.

Use these new symbolic values when specifying the resource group an
endpoint is associated with.  And use them to index the limits
arrays for source and destination resources, making it clearer how
these values are used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the number of resource groups supported by the hardware is less
than a certain number, we return early in ipa_resource_config_src()
and ipa_resource_config_dst() (to avoid programming resource limits
for non-existent groups).

Unfortunately, these checks are off by one.  Fix this problem in the
four places it occurs.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Separate the IPA resource-related code into a new source file,
"ipa_resource.c", and matching header file "ipa_resource.h".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Huazhong Tan says:
====================
net: hns3: add some cleanups

This series includes some cleanups for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

hclge_tm_vport_tc_info_update() is bloated, so split it into
separate functions for readability and maintainability.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hclge_reset_rebuild() is a bit too long. So add a new function
hclge_update_reset_level() to improve readability.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s/sucessful/successful/
s/serivce/service/
and remove a redundant new.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Correct a report warning in hns3_ethtool.c
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Parameter cm_buf is never used, so remove it.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Parameter vf in hclge_set_vf_vlan_common() is unused now,
so remove it.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the HW manual, the query operation is unnecessary
when the TM QCN error event is enabled, so remove it.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove some redundant blank lines.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vmdq is not supported yet, the num_vmdq_vport is always 0,
it's a bit confusing when using the num_vport, so remove
these unused codes of vmdq.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2021-03-24

mlx5e netdev driver updates:

1) Some cleanups from Colin, Tariq and Saeed.

2) Aya made some trivial refactoring to cleanup and generalize
 PTP and RQ (Receive Queue) creation and management.
 Mostly code decoupling and reducing dependencies between the different
 RX objects in the netdev driver.

 This is a preparation series for upcoming PTP special RQ creation which
 will allow coexistence of CQE compression (important performance feature,
 especially in Multihost systems) and HW TS PTP.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two spelling mistakes in a mlx5_core_info message. Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Reduce scope of mlx5e_ptp_params, move to its c file. Remove unneeded
variables from mlx5e_ptp_open and state bitmap from PTP channel. In
addition, remove channel index from PTP channel since it is set to a
hard coded value, use define instead.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Following patches in the set add support for RX PTP. Rename PTP prefix
from %s/port_ptp/ptp/g to include RX PTP too.

In addition rename indication (used in statistics context) that PTP-SQ
was opened: %s/port_ptp_opened/tx_ptp_opened/g. This will simplify adding
indication that PTP-RQ was opened.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add input parameter indicating the size of direct-TIRs/direct-RQTs array
to be created/destroyed. This allows next patches in the patch-set to
handle a single direct-TIR pointing to a direct-RQT with a single entry.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Allow different flavours of RQ to use the same close flow. Add validity
checks to support different RQ types which not necessarily initialize
all the RQ's functionality.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Support RQ activation for RQs without an ICOSQ in the main flow, like
existing trap-RQ and like PTP-RQ that will be introduced in the coming
patches in the patchset.
With this patch, remove the wrapper in traps to deactivate the trap-RQ.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Unify RQ creation for different RQ types. For each RQ type add a
separate open helper which initializes the RQ specific values and
trigger a call for generic open RQ function. Avoid passing the
mlx5e_channel pointer to the generic open RQ as a container, since the
RQ may reside under a different type of channel.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Translation method on the time-stamp is set by the capabilities. Avoid
code duplication by using a helper to set ptp_cyc2time callback on a
queue.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Change the signature of mlx5e_rq_alloc_mpwqe_info from receiving channel
pointer to receive the NUMA node. This allows creating mpwqe_info in
context of different channels types.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Do not use generic struct mlx5e_priv as a parameter to param
functions, as it is too generic. All calculations of the channel's
param should be mainly based on struct mlx5_core_dev and
struct mlx5e_params. Additional info can be explicitly passed.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Take params logic out of en_main.c, into the dedicated params.c.
Some functions are now hidden and become static.
No functional change here.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Pass q_counter idintifier, instead of reading it from mlx5e_priv
parameter.
This is a step towards removing the mlx5e_priv parameter from all
params function and logic in the next patches of the series.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cited patch allocated the wrong size for the indirection_rqt table,
fix that.

Fixes: 2119bda6 ("net/mlx5e: allocate 'indirection_rqt' buffer dynamically")
CC: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

... cannot be used in block quote, it breaks compilation, remove it.

Fix warnings due to missing blank line such as:

net-next/Documentation/networking/nf_flowtable.rst:142: WARNING: Block quote ends without a blank line; unexpected unindent.

Fixes: 143490cd ("docs: nf_flowtable: update documentation with enhancements")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
net: use less storage for most sysctl

This patch series adds a new sysctl type, to allow using u8 instead of
"int" or "long int" types.

Then we convert mosts sysctls found in struct netns_ipv4
to shrink it by three cache lines.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Many tcp sysctls are either bools or small ints that can fit into u8.

Reducing space taken by sysctls can save few cache line misses
when sending/receiving data while cpu caches are empty,
for example after cpu idle period.

This is hard to measure with typical network performance tests,
but after this patch, struct netns_ipv4 has shrunk
by three cache lines.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For these sysctls, their dedicated helpers have
to use proc_dou8vec_minmax().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>