- 15 May, 2024 20 commits
-
-
Puranjay Mohan authored
Zi Shen Lim is not actively doing kernel development and has decided to tranfer the responsibility of maintaining the JIT to me. Add myself as the maintainer for BPF JIT for ARM64 and remove Zi Shen Lim. Signed-off-by:
Puranjay Mohan <puranjay@kernel.org> Acked-by:
Zi Shen Lim <zlim.lnx@gmail.com> Link: https://lore.kernel.org/r/20240514183914.27737-1-puranjay@kernel.orgSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Puranjay Mohan authored
An ALU instruction's source operand can be the value in the source register or the 32-bit immediate value encoded in the instruction. This is controlled by the 's' bit of the 'opcode'. The current description explicitly uses the phrase 'value of the source register' when defining the meaning of 'src'. Change the description to use 'source operand' in place of 'value of the source register'. Signed-off-by:
Dave Thaler <dthaler1968@gmail.com> Link: https://lore.kernel.org/r/20240514130303.113607-1-puranjay@kernel.orgSigned-off-by:
-
Andrii Nakryiko authored
Adjust `union bpf_attr` size passed to kernel in two feature-detecting functions to take into account prog_token_fd field. Libbpf is avoiding memset()'ing entire `union bpf_attr` by only using minimal set of bpf_attr's fields. Two places have been missed when wiring BPF token support in libbpf's feature detection logic. Fix them trivially. Fixes: f3dcee93 ("libbpf: Wire up token_fd into feature probing logic") Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240513180804.403775-1-andrii@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextJakub Kicinski authored
Cross merge. Signed-off-by:Jakub Kicinski <kuba@kernel.org>
-
Ronald Wahl authored
Under some circumstances it may happen that the ks8851 Ethernet driver stops sending data. Currently the interrupt handler resets the interrupt status flags in the hardware after handling TX. With this approach we may lose interrupts in the time window between handling the TX interrupt and resetting the TX interrupt status bit. When all of the three following conditions are true then transmitting data stops: - TX queue is stopped to wait for room in the hardware TX buffer - no queued SKBs in the driver (txq) that wait for being written to hw - hardware TX buffer is empty and the last TX interrupt was lost This is because reenabling the TX queue happens when handling the TX interrupt status but if the TX status bit has already been cleared then this interrupt will never come. With this commit the interrupt status flags will be cleared before they are handled. That way we stop losing interrupts. The wrong handling of the ISR flags was there from the beginning but with commit 3dc5d445 ("net: ks8851: Fix TX stall caused by TX buffer overrun") the issue becomes apparent. Fixes: 3dc5d445 ("net: ks8851: Fix TX stall caused by TX buffer overrun") Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Simon Horman <horms@kernel.org> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org # 5.10+ Signed-off-by:
Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
syzbot reported a suspicious rcu usage[1] in bridge's mst code. While fixing it I noticed that nothing prevents a vlan to be freed while walking the list from the same path (br forward delay timer). Fix the rcu usage and also make sure we are not accessing freed memory by making br_mst_vlan_set_state use rcu read lock. [1] WARNING: suspicious RCU usage 6.9.0-rc6-syzkaller #0 Not tainted ----------------------------- net/bridge/br_private.h:1599 suspicious rcu_dereference_protected() usage! ... stack backtrace: CPU: 1 PID: 8017 Comm: syz-executor.1 Not tainted 6.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nbp_vlan_group net/bridge/br_private.h:1599 [inline] br_mst_set_state+0x1ea/0x650 net/bridge/br_mst.c:105 br_set_state+0x28a/0x7b0 net/bridge/br_stp.c:47 br_forward_delay_timer_expired+0x176/0x440 net/bridge/br_stp_timer.c:88 call_timer_fn+0x18e/0x650 kernel/time/timer.c:1793 expire_timers kernel/time/timer.c:1844 [inline] __run_timers kernel/time/timer.c:2418 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2429 run_timer_base kernel/time/timer.c:2438 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2448 __do_softirq+0x2c6/0x980 kernel/softirq.c:554 invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf2/0x1c0 kernel/softirq.c:633 irq_exit_rcu+0x9/0x30 kernel/softirq.c:645 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 RIP: 0010:lock_acquire+0x264/0x550 kernel/locking/lockdep.c:5758 Code: 2b 00 74 08 4c 89 f7 e8 ba d1 84 00 f6 44 24 61 02 0f 85 85 01 00 00 41 f7 c7 00 02 00 00 74 01 fb 48 c7 44 24 40 0e 36 e0 45 <4b> c7 44 25 00 00 00 00 00 43 c7 44 25 09 00 00 00 00 43 c7 44 25 RSP: 0018:ffffc90013657100 EFLAGS: 00000206 RAX: 0000000000000001 RBX: 1ffff920026cae2c RCX: 0000000000000001 RDX: dffffc0000000000 RSI: ffffffff8bcaca00 RDI: ffffffff8c1eaa60 RBP: ffffc90013657260 R08: ffffffff92efe507 R09: 1ffffffff25dfca0 R10: dffffc0000000000 R11: fffffbfff25dfca1 R12: 1ffff920026cae28 R13: dffffc0000000000 R14: ffffc90013657160 R15: 0000000000000246 Fixes: ec7328b5 ("net: bridge: mst: Multiple Spanning Tree (MST) mode") Reported-by: syzbot+fa04eb8a56fd923fc5d8@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=fa04eb8a56fd923fc5d8Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by:
-
Nikolay Aleksandrov authored
When running the bridge IGMP/MLD selftests on debug kernels we can get spurious errors when setting up the IGMP/MLD exclude timeout tests because the membership interval is just 3 seconds and the setup has 2 seconds of sleep plus various validations, the one second that is left is not enough. Increase the membership interval from 3 to 5 seconds to make room for the setup validation and 2 seconds of sleep. Fixes: 34d7ecb3 ("selftests: net: bridge: update IGMP/MLD membership interval value") Reported-by:
-
Nikolay Aleksandrov authored
syzbot triggered an uninit value[1] error in bridge device's xmit path by sending a short (less than ETH_HLEN bytes) skb. To fix it check if we can actually pull that amount instead of assuming. Tested with dropwatch: drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3) origin: software timestamp: Mon May 13 11:31:53 2024 778214037 nsec protocol: 0x88a8 length: 2 original length: 2 drop reason: PKT_TOO_SMALL [1] BUG: KMSAN: uninit-value in br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x34db/0x5350 net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] __bpf_tx_skb net/core/filter.c:2136 [inline] __bpf_redirect_common net/core/filter.c:2180 [inline] __bpf_redirect+0x14a6/0x1620 net/core/filter.c:2187 ____bpf_clone_redirect net/core/filter.c:2460 [inline] bpf_clone_redirect+0x328/0x470 net/core/filter.c:2432 ___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997 __bpf_prog_run512+0xb5/0xe0 kernel/bpf/core.c:2238 bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline] __bpf_prog_run include/linux/filter.h:657 [inline] bpf_prog_run include/linux/filter.h:664 [inline] bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425 bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058 bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5678 __do_sys_bpf kernel/bpf/syscall.c:5767 [inline] __se_sys_bpf kernel/bpf/syscall.c:5765 [inline] __x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765 x64_sys_call+0x96b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+a63a1f6a062033cf0f40@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=a63a1f6a062033cf0f40Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from Jakub Kicinski: "Core & protocols: - Complete rework of garbage collection of AF_UNIX sockets. AF_UNIX is prone to forming reference count cycles due to fd passing functionality. New method based on Tarjan's Strongly Connected Components algorithm should be both faster and remove a lot of workarounds we accumulated over the years. - Add TCP fraglist GRO support, allowing chaining multiple TCP packets and forwarding them together. Useful for small switches / routers which lack basic checksum offload in some scenarios (e.g. PPPoE). - Support using SMP threads for handling packet backlog i.e. packet processing from software interfaces and old drivers which don't use NAPI. This helps move the processing out of the softirq jumble. - Continue work of converting from rtnl lock to RCU protection. Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link information available via rtnetlink. - Small optimizations from Eric to UDP wake up handling, memory accounting, RPS/RFS implementation, TCP packet sizing etc. - Allow direct page recycling in the bulk API used by XDP, for +2% PPS. - Support peek with an offset on TCP sockets. - Add MPTCP APIs for querying last time packets were received/sent/acked and whether MPTCP "upgrade" succeeded on a TCP socket. - Add intra-node communication shortcut to improve SMC performance. - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver. - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver. - Add reset reasons for tracing what caused a TCP reset to be sent. - Introduce direction attribute for xfrm (IPSec) states. State can be used either for input or output packet processing. Things we sprinkled into general kernel code: - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS(). This required touch-ups and renaming of a few existing users. - Add Endian-dependent __counted_by_{le,be} annotations. - Make building selftests "quieter" by printing summaries like "CC object.o" rather than full commands with all the arguments. Netfilter: - Use GFP_KERNEL to clone elements, to deal better with OOM situations and avoid failures in the .commit step. BPF: - Add eBPF JIT for ARCv2 CPUs. - Support attaching kprobe BPF programs through kprobe_multi link in a session mode, meaning, a BPF program is attached to both function entry and return, the entry program can decide if the return program gets executed and the entry program can share u64 cookie value with return program. "Session mode" is a common use-case for tetragon and bpftrace. - Add the ability to specify and retrieve BPF cookie for raw tracepoint programs in order to ease migration from classic to raw tracepoints. - Add an internal-only BPF per-CPU instruction for resolving per-CPU memory addresses and implement support in x86, ARM64 and RISC-V JITs. This allows inlining functions which need to access per-CPU state. - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various atomics in bpf_arena which can be JITed as a single x86 instruction. Support BPF arena on ARM64. - Add a new bpf_wq API for deferring events and refactor process-context bpf_timer code to keep common code where possible. - Harden the BPF verifier's and/or/xor value tracking. - Introduce crypto kfuncs to let BPF programs call kernel crypto APIs. - Support bpf_tail_call_static() helper for BPF programs with GCC 13. - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF program to have code sections where preemption is disabled. Driver API: - Skip software TC processing completely if all installed rules are marked as HW-only, instead of checking the HW-only flag rule by rule. - Add support for configuring PoE (Power over Ethernet), similar to the already existing support for PoDL (Power over Data Line) config. - Initial bits of a queue control API, for now allowing a single queue to be reset without disturbing packet flow to other queues. - Common (ethtool) statistics for hardware timestamping. Tests and tooling: - Remove the need to create a config file to run the net forwarding tests so that a naive "make run_tests" can exercise them. - Define a method of writing tests which require an external endpoint to communicate with (to send/receive data towards the test machine). Add a few such tests. - Create a shared code library for writing Python tests. Expose the YAML Netlink library from tools/ to the tests for easy Netlink access. - Move netfilter tests under net/, extend them, separate performance tests from correctness tests, and iron out issues found by running them "on every commit". - Refactor BPF selftests to use common network helpers. - Further work filling in YAML definitions of Netlink messages for: nftables, team driver, bonding interfaces, vlan interfaces, VF info, TC u32 mark, TC police action. - Teach Python YAML Netlink to decode attribute policies. - Extend the definition of the "indexed array" construct in the specs to cover arrays of scalars rather than just nests. - Add hyperlinks between definitions in generated Netlink docs. Drivers: - Make sure unsupported flower control flags are rejected by drivers, and make more drivers report errors directly to the application rather than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen). - Ethernet high-speed NICs: - Broadcom (bnxt): - support multiple RSS contexts and steering traffic to them - support XDP metadata - make page pool allocations more NUMA aware - Intel (100G, ice, idpf): - extract datapath code common among Intel drivers into a library - use fewer resources in switchdev by sharing queues with the PF - add PFCP filter support - add Ethernet filter support - use a spinlock instead of HW lock in PTP clock ops - support 5 layer Tx scheduler topology - nVidia/Mellanox: - 800G link modes and 100G SerDes speeds - per-queue IRQ coalescing configuration - Marvell Octeon: - support offloading TC packet mark action - Ethernet NICs consumer, embedded and virtual: - stop lying about skb->truesize in USB Ethernet drivers, it messes up TCP memory calculations - Google cloud vNIC: - support changing ring size via ethtool - support ring reset using the queue control API - VirtIO net: - expose flow hash from RSS to XDP - per-queue statistics - add selftests - Synopsys (stmmac): - support controllers which require an RX clock signal from the MII bus to perform their hardware initialization - TI: - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices - icssg_prueth: add SW TX / RX Coalescing based on hrtimers - cpsw: minimal XDP support - Renesas (ravb): - support describing the MDIO bus - Realtek (r8169): - add support for RTL8168M - Microchip Sparx5: - matchall and flower actions mirred and redirect - Ethernet switches: - nVidia/Mellanox: - improve events processing performance - Marvell: - add support for MV88E6250 family internal PHYs - Microchip: - add DCB and DSCP mapping support for KSZ switches - vsc73xx: convert to PHYLINK - Realtek: - rtl8226b/rtl8221b: add C45 instances and SerDes switching - Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup - Ethernet PHYs: - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY. - micrel: lan8814: add support for PPS out and external timestamp trigger - WiFi: - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers. Modern devices can only be configured using nl80211. - mac80211/cfg80211 - handle color change per link for WiFi 7 Multi-Link Operation - Intel (iwlwifi): - don't support puncturing in 5 GHz - support monitor mode on passive channels - BZ-W device support - P2P with HE/EHT support - re-add support for firmware API 90 - provide channel survey information for Automatic Channel Selection - MediaTek (mt76): - mt7921 LED control - mt7925 EHT radiotap support - mt7920e PCI support - Qualcomm (ath11k): - P2P support for QCA6390, WCN6855 and QCA2066 - support hibernation - ieee80211-freq-limit Device Tree property support - Qualcomm (ath12k): - refactoring in preparation of multi-link support - suspend and hibernation support - ACPI support - debugfs support, including dfs_simulate_radar support - RealTek: - rtw88: RTL8723CS SDIO device support - rtw89: RTL8922AE Wi-Fi 7 PCI device support - rtw89: complete features of new WiFi 7 chip 8922AE including BT-coexistence and Wake-on-WLAN - rtw89: use BIOS ACPI settings to set TX power and channels - rtl8xxxu: enable Management Frame Protection (MFP) support - Bluetooth: - support for Intel BlazarI and Filmore Peak2 (BE201) - support for MediaTek MT7921S SDIO - initial support for Intel PCIe BT driver - remove HCI_AMP support" * tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits) selftests: netfilter: fix packetdrill conntrack testcase net: gro: fix napi_gro_cb zeroed alignment Bluetooth: btintel_pcie: Refactor and code cleanup Bluetooth: btintel_pcie: Fix warning reported by sparse Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1 Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config Bluetooth: btintel_pcie: Fix compiler warnings Bluetooth: btintel_pcie: Add *setup* function to download firmware Bluetooth: btintel_pcie: Add support for PCIe transport Bluetooth: btintel: Export few static functions Bluetooth: HCI: Remove HCI_AMP support Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() Bluetooth: qca: Fix error code in qca_read_fw_build_info() Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning Bluetooth: btintel: Add support for Filmore Peak2 (BE201) Bluetooth: btintel: Add support for BlazarI LE Create Connection command timeout increased to 20 secs dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth Bluetooth: compute LE flow credits based on recvbuf space Bluetooth: hci_sync: Use cmd->num_cis instead of magic number ... -
Linus Torvalds authored
Merge tag 'firewire-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Takashi Sakamoto: "During the development period of v6.8 kernel, it became evident that there was a lack of helper utilities to trace the initial state of bus, while investigating certain PHYs compliant with different versions of IEEE 1394 specification. This series of changes includes the addition of tracepoints events, provided by 'firewire' subsystem. These events enable tracing of how firewire core functions during bus reset and asynchronous communication over IEEE 1394 bus. When implementing the tracepoints events, it was found that the existing serialization and deserialization helpers for several types of asynchronous packets are scattered across both firewire-core and firewire-ohci kernel modules. A set of inline functions is newly added to address it, along with some KUnit tests, serving as the foundation for the tracepoints events. This renders the dispersed code obsolete. The remaining changes constitute the final steps in phasing out the usage of deprecated PCI MSI APIs, in continuation from the previous version" * tag 'firewire-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (29 commits) firewire: obsolete usage of *-objs in Makefile for KUnit test firewire: core: remove flag and width from u64 formats of tracepoints events firewire: core: fix type of timestamp for async_inbound_template tracepoints events firewire: core: add tracepoint event for handling bus reset Revert "firewire: core: option to log bus reset initiation" firewire: core: add tracepoints events for initiating bus reset firewire: ohci: obsolete OHCI_PARAM_DEBUG_BUSRESETS from debug module parameter firewire: ohci: add bus-reset event for initial set of handled irq firewire: core: add tracepoints event for asynchronous inbound phy packet firewire: core/cdev: add tracepoints events for asynchronous phy packet firewire: core: add tracepoints events for asynchronous outbound response firewire: core: add tracepoint event for asynchronous inbound request firewire: core: add tracepoints event for asynchronous inbound response firewire: core: add tracepoints events for asynchronous outbound request firewire: core: add support for Linux kernel tracepoints firewire: core: replace local macros with common inline functions for isochronous packet header firewire: core: add common macro to serialize/deserialize isochronous packet header firewire: core: obsolete tcode check macros with inline functions firewire: ohci: replace hard-coded values with common macros firewire: ohci: replace hard-coded values with inline functions for asynchronous packet header ...
-
Linus Torvalds authored
Merge tag 'for-6.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Add a dm-crypt optional "high_priority" flag that enables the crypt workqueues to use WQ_HIGHPRI. - Export dm-crypt workqueues via sysfs (by enabling WQ_SYSFS) to allow for improved visibility and controls over IO and crypt workqueues. - Fix dm-crypt to no longer constrain max_segment_size to PAGE_SIZE. This limit isn't needed given that the block core provides late bio splitting if bio exceeds underlying limits (e.g. max_segment_size). - Fix dm-crypt crypt_queue's use of WQ_UNBOUND to not use WQ_CPU_INTENSIVE because it is meaningless with WQ_UNBOUND. - Fix various issues with dm-delay target (ranging from a resource teardown fix, a fix for hung task when using kthread mode, and other improvements that followed from code inspection). * tag 'for-6.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm-delay: remove timer_lock dm-delay: change locking to avoid contention dm-delay: fix max_delay calculations dm-delay: fix hung task introduced by kthread mode dm-delay: fix workqueue delay_timer race dm-crypt: don't set WQ_CPU_INTENSIVE for WQ_UNBOUND crypt_queue dm: use queue_limits_set dm-crypt: stop constraining max_segment_size to PAGE_SIZE dm-crypt: export sysfs of all workqueues dm-crypt: add the optional "high_priority" flag
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas). The major update (which causes a conflict with block, see below) is Christoph removing the queue limits and their associated block helpers. The remaining patches are assorted minor fixes and deprecated function updates plus a bit of constification" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits) scsi: mpi3mr: Sanitise num_phys scsi: lpfc: Copyright updates for 14.4.0.2 patches scsi: lpfc: Update lpfc version to 14.4.0.2 scsi: lpfc: Add support for 32 byte CDBs scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading scsi: lpfc: Update logging of protection type for T10 DIF I/O scsi: lpfc: Change default logging level for unsolicited CT MIB commands scsi: target: Remove unused list 'device_list' scsi: iscsi: Remove unused list 'connlist_err' scsi: ufs: exynos: Add support for Tensor gs101 SoC scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata scsi: ufs: exynos: Allow max frequencies up to 267Mhz scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option scsi: ufs: dt-bindings: exynos: Add gs101 compatible scsi: qla2xxx: Fix debugfs output for fw_resource_count scsi: qedf: Ensure the copied buf is NUL terminated scsi: bfa: Ensure the copied buf is NUL terminated ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linuxLinus Torvalds authored
Pull ata updates from Damien Le Moal: - Convert the bindings for the imx-pata and ahci-da850 drivers to DT schemas (from Animesh) - Correct the code to handle HAS_IOPORT dependencies and conditionally compile drivers as needed (from Niklas) - Correct the legacy_exit() function in the pata_legacy driver to properly handle cleanups on driver exit (from Sergey) - Small code simplification removing the ata_exec_internal_sg() function and folding it into its only caller (from me) * tag 'ata-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: pata_legacy: make legacy_exit() work again ata: libata-core: Remove ata_exec_internal_sg() ata: add HAS_IOPORT dependencies dt-bindings: ata: ahci-da850: Convert to dtschema dt-bindings: ata: imx-pata: Convert to dtschema
-
git://git.kernel.org/pub/scm/fs/fsverity/linuxLinus Torvalds authored
Pull fsverity update from Eric Biggers: "Fix a false positive kmemleak warning" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux: fsverity: use register_sysctl_init() to avoid kmemleak warning
-
git://git.kernel.org/pub/scm/fs/fscrypt/linuxLinus Torvalds authored
Pull fscrypt update from Eric Biggers: "Improve the performance of opening unencrypted files on filesystems that support fscrypt" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux: fscrypt: try to avoid refing parent dentry in fscrypt_file_open
-
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linuxLinus Torvalds authored
Pull orangefs update from Mike Marshall: "Fix out-of-bounds fsid access. Small fix to quiet warnings from string fortification helpers, suggested by Arnd Bergmann" * tag 'for-linus-6.10-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: fix out-of-bounds fsid access
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 updates from Andreas Gruenbacher: - Properly fix the glock shrinker this time: it broke in commit "gfs2: Make glock lru list scanning safer" and commit "gfs2: fix glock shrinker ref issues" wasn't actually enough to fix it - On unmount, keep glocks around long enough that no more dlm callbacks can occur on them - Some more folio conversion patches from Matthew Wilcox - Lots of other smaller fixes and cleanups * tag 'gfs2-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (27 commits) gfs2: make timeout values more explicit gfs2: Convert gfs2_aspace_writepage() to use a folio gfs2: Add a migrate_folio operation for journalled files gfs2: Simplify gfs2_read_super gfs2: Convert gfs2_page_mkwrite() to use a folio gfs2: gfs2_freeze_unlock cleanup gfs2: Remove and replace gfs2_glock_queue_work gfs2: do_xmote fixes gfs2: finish_xmote cleanup gfs2: Unlock fewer glocks on unmount gfs2: Fix potential glock use-after-free on unmount gfs2: Remove ill-placed consistency check gfs2: Fix lru_count accounting gfs2: Fix "Make glock lru list scanning safer" Revert "gfs2: fix glock shrinker ref issues" gfs2: Fix "ignore unlock failures after withdraw" gfs2: Get rid of unnecessary test_and_set_bit gfs2: Don't set GLF_LOCK in gfs2_dispose_glock_lru gfs2: Replace gfs2_glock_queue_put with gfs2_glock_put_async gfs2: Get rid of gfs2_glock_queue_put in signal_our_withdraw ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlmLinus Torvalds authored
Pull dlm updates from David Teigland: "This set includes some small fixes, and some big internal changes: - Fix a long standing race between the unlock callback for the last lkb struct, and removing the rsb that became unused after the final unlock. This could lead different nodes to inconsistent info about the rsb master node. - Remove unnecessary refcounting on callback structs, returning to the way things were done in the past. - Do message processing in softirq context. This allows dlm messages to be cleared more quickly and efficiently, reducing long lists of incomplete requests. A future change to run callbacks directly from this context will make this more effective. - The softirq message processing involved a number of patches changing mutexes to spinlocks and rwlocks, and a fair amount of code re-org in preparation. - Use an rhashtable for rsb structs, rather than our old internal hash table implementation. This also required some re-org of lists and locks preparation for the change. - Drop the dlm_scand kthread, and use timers to clear unused rsb structs. Scanning all rsb's periodically was a lot of wasted work. - Fix recent regression in logic for copying LVB data in user space lock requests" * tag 'dlm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (34 commits) dlm: return -ENOMEM if ls_recover_buf fails dlm: fix sleep in atomic context dlm: use rwlock for lkbidr dlm: use rwlock for rsb hash table dlm: drop dlm_scand kthread and use timers dlm: do not use ref counts for rsb in the toss state dlm: switch to use rhashtable for rsbs dlm: add rsb lists for iteration dlm: merge toss and keep hash table lists into one list dlm: change to single hashtable lock dlm: increment ls_count for dlm_scand dlm: do message processing in softirq context dlm: use spin_lock_bh for message processing dlm: remove schedule in receive path dlm: convert ls_recv_active from rw_semaphore to rwlock dlm: avoid blocking receive at the end of recovery dlm: convert res_lock to spinlock dlm: convert ls_waiters_mutex to spinlock dlm: drop mutex use in waiters recovery dlm: add new struct to save position in dlm_copy_master_names ... -
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "This update brings a few minor performance improvements, otherwise there's a lot of refactoring, cleanups and other sort of not user visible changes. Performance improvements: - inline b-tree locking functions, improvement in metadata-heavy changes - relax locking on a range that's being reflinked, allows read operations to run in parallel - speed up NOCOW write checks (throughput +9% on a sample test) - extent locking ranges have been reduced in several places, namely around delayed ref processing Core: - more page to folio conversions: - relocation - send - compression - inline extent handling - super block write and wait - extent_map structure optimizations: - reduced structure size - code simplifications - add shrinker for allocated objects, the numbers can go high and could exhaust memory on smaller systems (reported) as they may not get an opportunity to be freed fast enough - extent locking optimizations: - reduce locking ranges where it does not seem to be necessary and are safe due to other means of synchronization - potential improvements due to lower contention, allocation/freeing and state management operations of extent state tracking structures - delayed ref cleanups and simplifications - updated trace points - improved error handling, warnings and assertions - cleanups and refactoring, unification of error handling paths" * tag 'for-6.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (122 commits) btrfs: qgroup: fix initialization of auto inherit array btrfs: count super block write errors in device instead of tracking folio error state btrfs: use the folio iterator in btrfs_end_super_write() btrfs: convert super block writes to folio in write_dev_supers() btrfs: convert super block writes to folio in wait_dev_supers() bio: Export bio_add_folio_nofail to modules btrfs: remove duplicate included header from fs.h btrfs: add a cached state to extent_clear_unlock_delalloc btrfs: push extent lock down in submit_one_async_extent btrfs: push lock_extent down in cow_file_range() btrfs: move can_cow_file_range_inline() outside of the extent lock btrfs: push lock_extent into cow_file_range_inline btrfs: push extent lock into cow_file_range btrfs: push extent lock into run_delalloc_cow btrfs: remove unlock_extent from run_delalloc_compressed btrfs: push extent lock down in run_delalloc_nocow btrfs: adjust while loop condition in run_delalloc_nocow btrfs: push extent lock into run_delalloc_nocow btrfs: push the extent lock into btrfs_run_delalloc_range btrfs: lock extent when doing inline extent in compression ... -
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofsLinus Torvalds authored
Pull erofs updates from Gao Xiang: "The LZ4 global buffer count is now configurable instead of the previous per-CPU buffers, which is useful for bare metals with hundreds of CPUs. A reserved buffer pool for LZ4 decompression can also be enabled to minimize the tail allocation latencies under the low memory scenarios with heavy memory pressure. In addition, Zstandard algorithm is now supported as an alternative since it has been requested by users for a while. There are some random cleanups as usual. Summary: - Make LZ4 global buffers configurable instead of per-CPU buffers - Add a reserved buffer pool for LZ4 decompression for lower latencies - Support Zstandard compression algorithm as an alternative - Derive fsid from on-disk UUID for .statfs() if possible - Minor cleanups" * tag 'erofs-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: Zstandard compression support erofs: clean up z_erofs_load_full_lcluster() erofs: derive fsid from on-disk UUID for .statfs() if possible erofs: add a reserved buffer pool for lz4 decompression erofs: do not use pagepool in z_erofs_gbuf_growsize() erofs: rename per-CPU buffers to global buffer pool and make it configurable erofs: rename utils.c to zutil.c
-
- 14 May, 2024 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI updates from Ard Biesheuvel: "Only a handful of changes this cycle, consisting of cleanup work and a low-prio bugfix: - Additional cleanup by Tim for the efivarfs variable name length confusion - Avoid freeing a bogus pointer when virtual remapping is omitted in the EFI boot stub" * tag 'efi-next-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: libstub: only free priv.runtime_map when allocated efi: Clear up misconceptions about a maximum variable name size efivarfs: Remove unused internal struct members Documentation: Mark the 'efivars' sysfs interface as removed efi: pstore: Request at most 512 bytes for variable names -
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: - Firmware loading from host support in intel-ish driver, needed to support Lunar Lake and later (Zhang Lixu) - updates to HID-BPF infrastructure, with some of the specific fixes (e.g. rdesc fixups) abstracted into separate BPF programs for consumption from libevdev/udev-hid-bpf (Benjamin Tissoires) - support for Deck IMU in hid-steam (Max Maisel) - fixes for better support of 3rd party playstation DS4 controllers (Max Staudt) - support for missing mappings and codes from HUT 1.5 in hid-debug (Thomas Kuehne) - initial support for ROG Ally and ROG X13 devices (Luke D. Jones) - full support for WinWing Orion2 (Ivan Gorinov) * tag 'hid-for-linus-2024051401' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (74 commits) selftests/hid: skip tests with HID-BPF if udev-hid-bpf is not installed selftests/hid: add tests for the Raptor Mach 2 joystick selftests/hid: move the gamepads definitions in the test file selftests/hid: import base_gamepad.py from hid-tools selftests/hid: add Huion Kamvas Pro 19 tests selftests/hid: tablets: also check for XP-Pen offset correction selftests/hid: tablets: add a couple of XP-PEN tablets selftests/hid: tablets: reduce the number of pen state selftests/hid: add support for HID-BPF pre-loading before starting a test selftests/hid: import base_device.py from hid-tools HID: bpf: add in-tree HID-BPF fix for the Raptor Mach 2 HID: bpf: add in-tree HID-BPF fix for the Huion Kamvas Pro 19 HID: bpf: add in-tree HID-BPF fix for the XBox Elite 2 over Bluetooth HID: bpf: add in-tree HID-BPF fix for the Wacom ArtPen HID: bpf: add in-tree HID-BPF fix for the IOGear Kaliber Gaming MMOmentum mouse HID: bpf: add in-tree HID-BPF fix for the HP Elite Presenter Mouse HID: bpf: add in-tree HID-BPF fix for the XPPen Artist 16 HID: bpf: add first in-tree HID-BPF fix for the XPPen Artist 24 HID: do not assume HAT Switch logical max < 8 HID: amd_sfh: Use amd_get_c2p_val() to read C2P register ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio updates from Bartosz Golaszewski "This was a quiet release cycle for the GPIO tree and so this pull-request is relatively small. We have one new driver, some minor improvements to the GPIO core code and across several drivers, some DT and documentation updates but in general nothing stands out or is controversial. All changes have spent time in next with no reported issues (or ones that were quickly fixed). GPIO core: - remove more unused legacy interfaces (after converting the last remaining users to better alternatives) - update kerneldocs - improve error handling and log messages in GPIO ACPI code - remove dead code (always true checks) from GPIOLIB New drivers: - add a driver for Intel Granite Rapids-D vGPIO Driver improvements: - use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24 - provide an ID table for gpio-cros-ec to avoid a driver name fallback check - add support for gpio-ranges for GPIO drivers supporting multiple GPIO banks - switch to using dynamic GPIO base in gpio-brcmstb - fix irq handling in gpio-npcm-sgpio - switch to memory mapped IO accessors in gpio-sch DT bindings: - add support for gpio-ranges to gpio-brcmstb - add support for a new model and the gpio-line-names property to gpio-mpfs Documentation: - replace leading tabs with spaces in code blocks - fix typos" * tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (30 commits) gpio: nuvoton: Fix sgpio irq handle error gpiolib: Discourage to use formatting strings in line names gpio: brcmstb: add support for gpio-ranges gpio: of: support gpio-ranges for multiple gpiochip devices dt-bindings: gpio: brcmstb: add gpio-ranges gpio: Add Intel Granite Rapids-D vGPIO driver gpio: brcmstb: Use dynamic GPIO base numbers gpiolib: acpi: Set label for IRQ only lines gpiolib: acpi: Add fwnode name to the GPIO interrupt label gpiolib: Get rid of never false gpio_is_valid() calls gpiolib: acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by() gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio() gpiolib: acpi: Simplify error handling in __acpi_find_gpio() gpiolib: acpi: Extract __acpi_find_gpio() helper gpio: sch: Utilise temporary variable for struct device gpio: sch: Switch to memory mapped IO accessors gpio: regmap: Use -ENOTSUPP consistently gpio: pcie-idio-24: Use -ENOTSUPP consistently Documentation: gpio: Replace leading TABs by spaces in code blocks gpiolib: acpi: Check for errors first in acpi_find_gpio() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linuxLinus Torvalds authored
Pull pwm updates from Uwe Kleine-König: "Apart for the normal updates for dt bindings, cleanups and support for new device variants to existing drivers this completes the conversion to pwmchip_alloc() which was started in the v6.9 development cycle. Using pwmchip_alloc() is a precondition to the character device support which allows easier and faster access to PWM devices. However there are some issues I want to clean up before including it in mainline, so this isn't contained here despite it was in next for some time. Thanks to Alexandre Mergnat, Binbin Zhou, Dmitry Rokosov, George Stark, Jerome Brunet and Varshini Rajendran for their contributions. Further thanks go to AngeloGioacchino Del Regno, Conor Dooley, David Lechner, Fabrice Gasnier, Florian Fainelli, Guenter Roeck, Gustavo A. R. Silva, Krzysztof Kozlowski and Rob Herring for valuable patch review" * tag 'pwm/for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (34 commits) pwm: pca9685: Drop explicit initialization of struct i2c_device_id::driver_data to 0 dt-bindings: pwm: snps,dw-apb-timers: Do not require pwm-cells twice dt-bindings: pwm: mediatek,pwm-disp: Do not require pwm-cells twice dt-bindings: pwm: mediatek,mt2712: Do not require pwm-cells twice dt-bindings: pwm: marvell,pxa: Do not require pwm-cells twice dt-bindings: pwm: google,cros-ec: Do not require pwm-cells twice dt-bindings: pwm: bcm2835: Do not require pwm-cells twice pwm: meson: Use mul_u64_u64_div_u64() for frequency calculating pwm: meson: Add check for error from clk_round_rate() pwm: meson: Drop unneeded check in .get_state() dt-bindings: pwm: mediatek,pwm-disp: add compatible for mt8365 SoC pwm: meson: Add generic compatible for meson8 to sm1 pwm: bcm2835: Drop open coded variant of devm_clk_rate_exclusive_get() pwm: bcm2835: Introduce a local variable for &pdev->dev pwm: stm32: Calculate prescaler with a division instead of a loop pwm: stm32: Fix for settings using period > UINT32_MAX pwm: stm32: Improve precision of calculation in .apply() pwm: stm32: Add error messages in .probe()'s error paths pwm: Make pwmchip_[sg]et_drvdata() a wrapper around dev_set_drvdata() pwm: Don't check pointer for being non-NULL after use ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linuxLinus Torvalds authored
Pull hte/timestamp update from Dipen Patel: - Improve hte-test driver platform remove callback by replacing it with the remove_new which returns void instead * tag 'for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux: hte: tegra-194: Convert to platform remove callback returning void
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon updates from Guenter Roeck: "New drivers: - Infineon XDP710 - EC Chip driver for Lenovo ThinkStation motherboards - Analog Devices ADP1050 Improved support for existing drivers: - emc1403: Convert to with_info API; Support for EMC1428 and EMC1438 - nzxt-kraken3: Support for NZXT Kraken 2023 - aquacomputer_d5next: Support for Octo flow sensors - pmbus/adm1275: Support for ADM1281 - dell-smm: Supportt for Precision 7540 and G5 5505 Other notable cleanup: - max6639: Use regmap - Remove unused structure fields from multiple drivers - Drop explicit initialization of struct i2c_device_id::driver_data to zero - Improve configuration mode handling in it87 driver - jc42: Drop support for I2C_CLASS_SPD - Various conversions to devicetree schema - Add HAS_IOPORT dependencies as needed Minor fixes and improvements to max31790, coretemp, aspeed-g6-pwm-tach, pwm-fan, pmbus/mp2975, acpi_power_meter, and lm70 drivers" * tag 'hwmon-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (52 commits) hwmon: (nzxt-kraken3) Bail out for unsupported device variants hwmon: (emc1403) Add support for EMC1428 and EMC1438. hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0 (part 2) hwmon: (emc1403) Add support for conversion interval configuration hwmon: (emc1403) Support 11 bit accuracy hwmon: (emc1403) Convert to with_info API hwmon: (max6639) Use regmap hwmon: (npcm750-pwm-fan) Remove another unused field in struct npcm7xx_cooling_device hwmon: (npcm750-pwm-fan) Remove an unused field in struct npcm7xx_cooling_device hwmon: (stts751) Remove an unused field in struct stts751_priv hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0 hwmon: (max31790) revise the scale to write pwm hwmon: (nzxt-kraken3) Add support for NZXT Kraken 2023 (standard and Elite) models hwmon: (nzxt-kraken3) Decouple device names from kinds hwmon: (it87) Remove tests nolonger required hwmon: (it87) Test for chipset before entering configuration mode hwmon: (it87) Do not enter configuration mode for some chiptypes hwmon: (it87) Rename FEAT_CONF_NOEXIT to FEAT_NOCONF as more descriptive of requirement hwmon: (pmbus) Add support for Infineon XDP710 dt-bindings: hwmon: Add infineon xdp710 driver bindings ... -
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi updates from Mark Brown: "The diffstat for this release is dominated by the new Airoha driver, mainly as a result of this being a generally quite quiet release. There were a couple of cleanups in the core but nothing substantial, the updates here are almost all driver specific ones. - Support for multi-word mode in the OMAP2 McSPI driver - Overhaul of the PXA2xx driver, mostly API updates - A number of DT binding conversions - Support for Airoha NAND controllers, Cirrus Logic CS35L56, Mobileye EYEQ5 and Renesas R8A779H0" * tag 'spi-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: dw: Bail out early on unsupported target mode spi: Remove unneded check for orig_nents MAINTAINERS: repair file entry in AIROHA SPI SNFI DRIVER spi: pxa2xx: Drop the stale entry in documentation TOC spi: pxa2xx: Don't provide struct chip_data for others spi: pxa2xx: Remove timeout field from struct chip_data spi: pxa2xx: Remove DMA parameters from struct chip_data spi: pxa2xx: Drop struct pxa2xx_spi_chip spi: pxa2xx: Don't use "proxy" headers spi: pxa2xx: Remove outdated documentation spi: pxa2xx: Move contents of linux/spi/pxa2xx_spi.h to a local one spi: pxa2xx: Provide num-cs for Sharp PDAs via device properties spi: pxa2xx: Allow number of chip select pins to be read from property spi: dt-bindings: ti,qspi: convert to dtschema spi: bitbang: Add missing MODULE_DESCRIPTION() spi: bitbang: Use NSEC_PER_*SEC rather than hard coding spi: dw: Drop default number of CS setting spi: dw: Convert dw_spi::num_cs to u32 spi: dw: Add a number of native CS auto-detection spi: dw: Convert to using BITS_TO_BYTES() macro ... -
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator updates from Mark Brown: "There's one API update here, a new API factoring out a common pattern for reference voltage supplies. These are supplies used as a reference by analogue circuits where the consumer requests and enables the supply, reads the voltage to calibrate the user and then never touches it again. This is factored out into a single operation which just returns the voltage and uses devm_ to manage the request and enable portion. Otherwise this has been a very quiet release, we've got some new device support, some small fixes, housekeeping and cleanup work but nothing substantial. There's also some non-regulator changes in here, a number of users for the new reference voltage API were merged along with it and some MFD changes were pulled in as dependencies for new driver work. Highlights: - Add a new API for single operation handling of reference voltages - Support for Allwinner AXP717 and D1, and NXP PCA9561A" * tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (33 commits) regulator: sun20i: Add Allwinner D1 LDOs driver regulator: dt-bindings: Add Allwinner D1 system LDOs regulator: Mention regulator id in error message about dummy supplies staging: iio: impedance-analyzer: ad5933: Use devm_regulator_get_enable_read_voltage() iio: frequency: admv1013: Use devm_regulator_get_enable_read_voltage() iio: addac: ad74115: Use devm_regulator_get_enable_read_voltage() hwmon: (adc128d818) simplify final return in probe regulator: devres: fix devm_regulator_get_enable_read_voltage() return hwmon: (da9052) Use devm_regulator_get_enable_read_voltage() hwmon: (adc128d818) Use devm_regulator_get_enable_read_voltage() regulator: devres: add API for reference voltage supplies regulator: rtq2208: Fix LDO discharge register and add vsel setting regulator: dt-bindings: fixed-regulator: Add a preferred node name regulator: axp20x: add support for the AXP717 mfd: axp20x: Add support for AXP717 PMIC dt-bindings: mfd: x-powers,axp152: Document AXP717 regulator: axp20x: fix typo-ed identifier dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible regulator: pca9450: add pca9451a support regulator: dt-bindings: pca9450: add pca9451a support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap updates from Mark Brown: "Other than a few cleanups the changes here are all in the KUnit tests, Richard Fitzgerald sent some bug fixes during the v6.9 cycle and while adding test coverage for the issues fixed did some fairly substantial improvements, both cleaning up the framework and building out the coverage" * tag 'regmap-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Reorder fields in 'struct regmap_config' to save some memory regmap: kunit: Fix an NULL vs IS_ERR() check regmap: spi: Add missing MODULE_DESCRIPTION() regmap: Drop capitalisation in MODULE_DESCRIPTION() regmap: kunit: Add test cases for regmap_read_bypassed() regmap: kunit: Add cache-drop test with multiple cache blocks regmap: kunit: Replace a kmalloc/kfree() pair with KUnit-managed alloc regmap: kunit: Use a KUnit action to call regmap_exit() regmap: kunit: Add more cache-sync tests regmap: kunit: Add more cache-drop tests regmap: kunit: Run non-sparse cache tests at non-zero register addresses regmap: kunit: Run sparse cache tests at non-zero register addresses regmap: kunit: Introduce struct for test case parameters regmap: kunit: Create a struct device for the regmap regmap: kunit: Fix warnings of implicit casts to __le16 and __be16 regmap: maple: Remove second semicolon
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI updates from Rafael Wysocki: "These are ACPICA updates coming from the 20240322 release upstream, an ACPI DPTF driver update adding new platform support for it, some new quirks and some assorted fixes and cleanups. Specifics: - Add EINJ CXL error types to actbl1.h (Ben Cheatham) - Add support for RAS2 table to ACPICA (Shiju Jose) - Fix various spelling mistakes in text files and code comments in ACPICA (Colin Ian King) - Fix spelling and typos in ACPICA (Saket Dumbre) - Modify ACPI_OBJECT_COMMON_HEADER (lijun) - Add RISC-V RINTC affinity structure support to ACPICA (Haibo Xu) - Fix CXL 3.0 structure (RDPAS) in the CEDT table (Hojin Nam) - Add missin increment of registered GPE count to ACPICA (Daniil Tatianin) - Mark new ACPICA release 20240322 (Saket Dumbre) - Add support for the AEST V2 table to ACPICA (Ruidong Tian) - Disable -Wstringop-truncation for some ACPICA code in the kernel to avoid a compiler warning that is not very useful (Arnd Bergmann) - Make the kernel indicate support for several ACPI features that are in fact supported to the platform firmware through _OSC and fix the Generic Initiator Affinity _OSC bit (Armin Wolf) - Make the ACPI core set the owner value for ACPI drivers, drop the owner setting from a number of drivers and eliminate the owner field from struct acpi_driver (Krzysztof Kozlowski) - Rearrange fields in several structures to effectively eliminate computations from container_of() in some cases (Andy Shevchenko) - Do some assorted cleanups of the ACPI device enumeration code (Andy Shevchenko) - Make the ACPI device enumeration code skip devices with _STA values clearly identified by the specification as invalid (Rafael Wysocki) - Rework the handling of the NHLT table to simplify and clarify it and drop some obsolete pieces (Cezary Rojewski) - Add ACPI IRQ override quirks for Asus Vivobook Pro N6506MV, TongFang GXxHRXx and GMxHGxx, and XMG APEX 17 M23 (Guenter Schafranek, Tamim Khan, Christoffer Sandberg) - Add reference to UEFI DSD Guide to the documentation related to the ACPI handling of device properties (Sakari Ailus) - Fix SRAT lookup of CFMWS ranges with numa_fill_memblks(), remove lefover architecture-dependent code from the ACPI NUMA handling code and simplify it on top of that (Robert Richter) - Add a num-cs device property to specify the number of chip selects for Intel Braswell to the ACPI LPSS (Intel SoC) driver and remove a nested CONFIG_PM #ifdef from it (Andy Shevchenko) - Move three x86-specific ACPI files to the x86 directory (Andy Shevchenko) - Mark SMO8810 accel on Dell XPS 15 9550 as always present and add a PNP_UART1_SKIP quirk for Lenovo Blade2 tablets (Hans de Goede) - Move acpi_blacklisted() declaration to asm/acpi.h (Kuppuswamy Sathyanarayanan) - Add Lunar Lake support to the ACPI DPTF driver (Sumeet Pawnikar) - Mark the einj_driver driver's remove callback as __exit because it cannot get unbound via sysfs (Uwe Kleine-König) - Fix a typo in the ACPI documentation regarding the layout of sysfs subdirectory representing the ACPI namespace (John Watts) - Make the ACPI pfrut utility print the update_cap field during capability query (Chen Yu) - Add HAS_IOPORT dependencies to PNP (Niklas Schnelle)" * tag 'acpi-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits) ACPI/NUMA: Squash acpi_numa_memory_affinity_init() into acpi_parse_memory_affinity() ACPI/NUMA: Squash acpi_numa_slit_init() into acpi_parse_slit() ACPI/NUMA: Remove architecture dependent remainings x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks() ACPI: video: Add backlight=native quirk for Lenovo Slim 7 16ARH7 ACPI: scan: Avoid enumerating devices with clearly invalid _STA values ACPI: Move acpi_blacklisted() declaration to asm/acpi.h ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MV ACPICA: AEST: Add support for the AEST V2 table ACPI: tools: pfrut: Print the update_cap field during capability query ACPI: property: Add reference to UEFI DSD Guide Documentation: firmware-guide: ACPI: Fix namespace typo PNP: add HAS_IOPORT dependencies ACPI: resource: Do IRQ override on TongFang GXxHRXx and GMxHGxx ACPI: resource: Do IRQ override on GMxBGxx (XMG APEX 17 M23) ACPICA: Update acpixf.h for new ACPICA release 20240322 ACPICA: events/evgpeinit: don't forget to increment registered GPE count ACPICA: Fix CXL 3.0 structure (RDPAS) in the CEDT table ACPICA: SRAT: Add dump and compiler support for RINTC affinity structure ACPICA: SRAT: Add RISC-V RINTC affinity structure ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management updates from Rafael Wysocki: "These are mostly cpufreq updates, including a significant intel-pstate driver update and several amd-pstate improvements plus some updates of ARM cpufreq drivers, general fixes and cleanups. Also included are changes related to system sleep, power capping updates adding support for a new platform and a new hardware feature (among other things), a Samsung exynos-asv driver update allowing it to change its Energy Model after adjusting voltage, minor cpuidle and devfreq updates and a small documentation cleanup. Specifics: - Rework the handling of disabled turbo in the intel_pstate driver and make it update the maximum CPU frequency consistently regardless of the reason on top of a number of cleanups (Rafael Wysocki) - Add missing checks for NULL .exit() cpufreq driver callback to the cpufreq core (Viresh Kumar) - Prevent pulicy->max from going above the frequency QoS maximum value when cpufreq_frequency_table_verify() is used (Xuewen Yan) - Prevent a negative CPU number or frequency value from being printed if they are really large (Joshua Yeong) - Update MAINTAINERS entry for amd-pstate to add two new submaintainers and a designated reviewer (Huang Rui) - Clean up the amd-pstate driver and update its documentation (Gautham Shenoy) - Fix the highest frequency issue in the amd-pstate driver which limits performance (Perry Yuan) - Enable CPPC v2 for certain processors in the family 17H, as requested by TR40 processor users who expect improved performance and lower system temperature (Perry Yuan) - Change latency and delay values to be read from platform firmware firstly for more accurate timing (Perry Yuan) - A new quirk is introduced for supporting amd-pstate on legacy processors which either lack CPPC capability, or only only have CPPC v2 capability (Perry Yuan) - Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi, Dan Carpenter, Viresh Kumar) - CPPC cpufreq: Fix possible null pointer dereference (Aleksandr Mishin) - Eliminate uses of of_node_put() from cpufreq (Javier Carrasco, Shivani Gupta) - brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens) - mediatek cpufreq: Add support for MT7988A (Sam Shih) - cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei Fan) - Fix struct cpudata::epp_cached kernel-doc in the intel_pstate cpufreq driver (Jeff Johnson) - Fix kerneldoc description of ladder_do_selection() (Jeff Johnson) - Convert the cpuidle kirkwood driver to platform remove callback returning void (Yangtao Li) - Replace deprecated strncpy() with strscpy() in the hibernation core code (Justin Stitt) - Use %ps to simplify debug output in the core system-wide suspend and resume code (Len Brown) - Remove unnecessary else from device_init_wakeup() and make device_wakeup_disable() return void (Dhruva Gole) - Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui) - Add support for ArrowLake-H platform to the Intel RAPL driver (Zhang Rui) - Avoid explicit cpumask allocation on stack in DTPM (Dawei Li) - Make the Samsung exynos-asv driver update the Energy Model after adjusting voltage on top of some preliminary changes of the OPP and Enery Model generic code (Lukasz Luba) - Remove a reference to a function that has been dropped from the power management documentation (Bjorn Helgaas) - Convert the platfrom remove callback to .remove_new for the exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and rk3399_dmc devfreq drivers (Uwe Kleine-König) - Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon)" * tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits) PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions PM / devfreq: rk3399_dmc: Convert to platform remove callback returning void PM / devfreq: sun8i-a33-mbus: Convert to platform remove callback returning void PM / devfreq: mtk-cci: Convert to platform remove callback returning void PM / devfreq: exynos-ppmu: Convert to platform remove callback returning void PM / devfreq: exynos-nocp: Convert to platform remove callback returning void cpufreq: amd-pstate: fix the highest frequency issue which limits performance cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc cpuidle: ladder: fix ladder_do_selection() kernel-doc powercap: intel_rapl_tpmi: Enable PMU support powercap: intel_rapl: Introduce APIs for PMU support PM: hibernate: replace deprecated strncpy() with strscpy() cpufreq: Fix up printing large CPU numbers and frequency values MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq cpufreq: amd-pstate: fix code format problems cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing cppc_acpi: print error message if CPPC is unsupported cpufreq: amd-pstate: get transition delay and latency value from ACPI tables cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0 ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull thermal control updates from Rafael Wysocki: "The most significant part of this is a rework of thermal governors, including a redesign of the thermal governor interface and changes to make some of them take trip point hysteresis into account properly, as well as some related cleanups of the thermal governors and thermal core. The above is based on preliminary changes refactoring thermal data structures and moving the definitions of some of them into the thermal core which also ensure that trip point crossing notifications will be sent to user space via netlink and recorded in the debug statistics in temperature order. In addition, netlink bind/unbind notifications are added to the thermal core and the Intel HFI driver is modified to use them to avoid sending netlink messages until there are subscribers. Apart from that, multiple thermal drivers are updated which includes new hardware support (MediaTek MT8188 and MT8186, Amlogic A1 thermal sensor, Loongson-2K2000, Lmh QCM2290), fixes, cleanups and documentation updates, and the recently added thermal debug code is fixed and cleaned up. Specifics: - Redesign the thermal governor interface to allow the governors to work in a more straightforward way (Rafael Wysocki) - Make thermal governors take the current trip point thresholds into account in their computations which allows trip hysteresis to be observed more accurately (Rafael Wysocki) - Make the thermal core manage passive polling for thermal zones and remove passive polling management from thermal governors (Rafael Wysocki) - Refactor trip point representation and move the definition of thermal governor and thermal zone device structures to the thermal core (Rafael Wysocki) - Sort trip point crossing notifications and debug recording of trip point crossing events by temperature (Rafael Wysocki) - Improve the handling of cooling device states and thermal mitigation episodes in progress in the thermal debug code (Rafael Wysocki) - Avoid excessive updates of trip point statistics and clean up the printing of thermal mitigation episode information (Rafael Wysocki) - Clean up thermal governors and thermal core (Rafael Wysocki) - Allow thermal drivers to register notifiers that will be invoked on netlink events like BIND and UNBIND, so that they can adjust their activity depending on whether or not there are any subscribers of netlink messages coming from them, and make the Intel HFI driver use this mechanism (Stanislaw Gruszka) - Adjust the update delay and capabilities-per-event values in the Intel HFI thermal driver to prevent it from missing events and allow it to process more data in one go (Ricardo Neri) - Add missing MODULE_DESCRIPTION() to multiple files in the int340x_thermal and intel_soc_dts_iosf drivers (Srinivas Pandruvada) - Replace deprecated strncpy() with strscpy() in the int340x_thermal driver (Justin Stitt) - Add QCM2290 compatible DT bindings for Lmh and fix a NULL pointer dereference in the lmh driver when the SCM is not present (Konrad Dybcio) - Use the strreplace() function instead of doing it manually in the Armada driver (Rasmus Villemoes) - Convert st,stih407-thermal to DT schema and fix up missing properties (Raphael Gallais-Pou) - Add suspend/resume by restoring the context of the tsens sensor (Priyansh Jain) - Support A1 SoC family Thermal Sensor controller and add the DT bindings (Dmitry Rokosov) - Improve the temperature approximation calculation and consolidate the Tj constant into a shared area of the structure instead of duplicating it on the Rcar Gen3 (Niklas Söderlund) - Fix the Mediatek LVTS sensor coefficient for the MT8192 in order to support it correctly (Hsin-Te Yuan) - Fix a NULL pointer dereference in the tsens driver when the function compute_intercept_slope() is called with a NULL parameter (Aleksandr Mishin) - Remove some unused fields in struct qpnp_tm_chip and k3_bandgap (Christophe Jaillet) - Fix up calibration efuse data decoding, consolidate the code by checking boundaries and refactor some part of the LVTS Mediatek driver. After setting the scene, add MT8186 and MT8188 along with the DT bindings (Nicolas Pitre) - Add Loongson-2K2000 support after some minor code adjustements and providing the DT bindings definition (Binbin Zhou)" * tag 'thermal-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits) thermal: intel: hfi: Increase the number of CPU capabilities per netlink event thermal: intel: hfi: Rename HFI_MAX_THERM_NOTIFY_COUNT thermal: intel: hfi: Shorten the thermal netlink event delay to 100ms thermal: intel: hfi: Rename HFI_UPDATE_INTERVAL thermal: intel: Add missing module description thermal: core: Move passive polling management to the core thermal: core: Do not call handle_thermal_trip() if zone temperature is invalid thermal: trip: Add missing empty code line thermal/debugfs: Avoid printing zero duration for mitigation events in progress thermal/debugfs: Pass cooling device state to thermal_debug_cdev_add() thermal/debugfs: Create records for cdev states as they get used thermal: core: Introduce thermal_governor_trip_crossed() thermal/debugfs: Make tze_seq_show() skip invalid trips and trips with no stats thermal/debugfs: Rename thermal_debug_update_temp() to thermal_debug_update_trip_stats() thermal/debugfs: Clean up thermal_debug_update_temp() thermal/debugfs: Avoid excessive updates of trip point statistics thermal: core: Relocate critical and hot trip handling thermal: core: Drop the .throttle() governor callback thermal: gov_user_space: Use .trip_crossed() instead of .throttle() thermal: gov_fair_share: Eliminate unnecessary integer divisions ... -
Linus Torvalds authored
Merge tag 'linux_kselftest-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: - make framework and tests reporting KTAP compliant - make ktap_helpers and power_supply test POSIX compliant - add ksft_exit_fail_perror() to include errono in string form - avoid clang reporting false positive static analysis errors about functions that exit and never return. ksft_exit* functions are marked __noreturn to address this problem - add mechanism for reporting a KSFT_ result code - fix build warnings related missing headers and unused variables - fix clang build failures - cleanups to resctrl test - add host arch for LLVM builds * tag 'linux_kselftest-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (44 commits) selftests/sgx: Include KHDR_INCLUDES in Makefile selftests: Compile kselftest headers with -D_GNU_SOURCE selftests/resctrl: fix clang build warnings related to abs(), labs() calls selftests/ftrace: Fix checkbashisms errors selftests/ftrace: Fix BTFARG testcase to check fprobe is enabled correctly selftests/capabilities: fix warn_unused_result build warnings selftests: filesystems: add missing stddef header selftests: kselftest_deps: fix l5_test() empty variable selftests: default to host arch for LLVM builds selftests/resctrl: fix clang build failure: use LOCAL_HDRS selftests/binderfs: use the Makefile's rules, not Make's implicit rules Documentation: kselftest: fix codeblock selftests: kselftest: Make ksft_exit functions return void instead of int selftests: x86: ksft_exit_pass() does not return selftests: timers: ksft_exit functions do not return selftests: sync: ksft_exit_pass() does not return selftests/resctrl: ksft_exit_skip() does not return selftests: pidfd: ksft_exit functions do not return selftests/mm: ksft_exit functions do not return selftests: membarrier: ksft_exit_pass() does not return ...
-
Linus Torvalds authored
Merge tag 'linux_kselftest-kunit-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit updates from Shuah Khan: - fix race condition in try-catch completion - change __kunit_test_suites_init() to exit early if there is nothing to test - change string-stream-test to use KUNIT_DEFINE_ACTION_WRAPPER - move fault tests behind KUNIT_FAULT_TEST Kconfig option - kthread test fixes and improvements - iov_iter test fixes * tag 'linux_kselftest-kunit-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: bail out early in __kunit_test_suites_init() if there are no suites to test kunit: string-stream-test: use KUNIT_DEFINE_ACTION_WRAPPER kunit: test: Move fault tests behind KUNIT_FAULT_TEST Kconfig option kunit: unregister the device on error kunit: Fix race condition in try-catch completion kunit: Add tests for fault kunit: Print last test location on fault kunit: Fix KUNIT_SUCCESS() calls in iov_iter tests kunit: Handle test faults kunit: Fix timeout message kunit: Fix kthread reference kunit: Handle thread creation error
-
Linus Torvalds authored
Merge tag 'linux_kselftest-nolibc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull nolibc updates from Shuah Khan: - add support for uname(2) - remove open-coded strnlen() - export strlen() - add tests for strlcat() and strlcpy() - fix memory error in realloc() - fix strlcat() and strlcpy() return code and size usage * tag 'linux_kselftest-nolibc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: tools/nolibc: add support for uname(2) tools/nolibc/string: remove open-coded strnlen() selftests/nolibc: Add tests for strlcat() and strlcpy() tools/nolibc: Fix strlcpy() return code and size usage tools/nolibc: Fix strlcat() return code and size usage tools/nolibc/string: export strlen() tools/nolibc/stdlib: fix memory error in realloc()
-
https://github.com/openrisc/linuxLinus Torvalds authored
Pull OpenRISC updates from Stafford Horne: "A few cleanups and fixups from me: - Add a few missing relocations to fix module loading - Cleanup FPU state save and restore to be more efficient - Cleanups to traps handling and logging - Fix issue with poweroff being broken after recent power driver refactorings" * tag 'for-linus' of https://github.com/openrisc/linux: openrisc: Move FPU state out of pt_regs openrisc: Add FPU config openrisc: traps: Don't send signals to kernel mode threads openrisc: traps: Remove calls to show_registers before die openrisc: traps: Convert printks to pr_<level> macros openrisc: Add support for more module relocations openrisc: Define openrisc relocation types openrisc: Use do_kernel_power_off() -
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linuxLinus Torvalds authored
Pull sh updates from John Paul Adrian Glaubitz: "The majority of improvements are coming from Geert Uytterhoeven who took the time to fix a total of 30 cases of "-Wmissing-prototypes" compiler warnings, either by adding a missing header include, defining the missing forward declarations or making the functions in question static. In the case of several DMA functions, the fix was to actually just remove them as they were added but never used. Another one of these warnings was eliminated by removing the left-over sh5 cache handling support, a change that was suggested by Yoshinori Sato and, finally, the last of these warnings was fixed by guarding the function setup_profiling_timer() with CONFIG_PROFILING. While at it, Geert also removed two unneeded casts to kprobe_opcode_t in the kprobes code. Another change was contributed by Guenter Roeck to fix errors that were reported during checksum unit tests. The fix actually reverts the older change cadc4e1a ("sh: Handle calling csum_partial with misaligned data") which turned to be incorrect. It remains to be investigated whether there is a better way to handle misaligned data in csum_partial(). A small fix contributed by Krzysztof Kozlowski drops the incorrect SPI controller spi-max-frequency property in the device tree source file for the J2 device platform while Uwe Kleine-König converted the push-switch driver to have its callback function return void, a change that is currently being applied to all drivers throughout the kernel in order to avoid resource leaks. Last but not least, Artur Rojek has fixed the IOPORT base address for the Sega Dreamcast platform which allows the Linux kernel to be successfully booted on this once popular video game console for the first time since a long time ago" * tag 'sh-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: (35 commits) sh: setup: Add missing forward declaration for sh_fdt_init() sh: smp: Protect setup_profiling_timer() by CONFIG_PROFILING sh: of-generic: Add missing #include <asm/clock.h> sh: dreamcast: Fix GAPS PCI bridge addressing sh: boot: Add proper forward declarations sh: boot: Remove sh5 cache handling Revert "sh: Handle calling csum_partial with misaligned data" sh: j2: Drop incorrect SPI controller spi-max-frequency property sh: push-switch: Convert to platform remove callback returning void sh: sh7785lcr: Make init_sh7785lcr_IRQ() static sh: sh7757: Add missing #include <asm/mmzone.h> sh: sh7757lcr: Make init_sh7757lcr_IRQ() static sh: mach-sh03: Make sh03_rtc_settimeofday() static sh: mach-highlander: Add missing #include <mach/highlander.h> sh: traps: Make is_dsp_inst() static sh: cache: Move forward declarations to <asm/cacheflush.h> sh: dma: Remove unused functionality sh: dwarf: Make dwarf_lookup_fde() static sh: kprobes: Remove unneeded kprobe_opcode_t casts sh: kprobes: Make trampoline_probe_handler() static ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 updates from Will Deacon: "The most interesting parts are probably the mm changes from Ryan which optimise the creation of the linear mapping at boot and (separately) implement write-protect support for userfaultfd. Outside of our usual directories, the Kbuild-related changes under scripts/ have been acked by Masahiro whilst the drivers/acpi/ parts have been acked by Rafael and the addition of cpumask_any_and_but() has been acked by Yury. ACPI: - Support for the Firmware ACPI Control Structure (FACS) signature feature which is used to reboot out of hibernation on some systems Kbuild: - Support for building Flat Image Tree (FIT) images, where the kernel Image is compressed alongside a set of devicetree blobs Memory management: - Optimisation of our early page-table manipulation for creation of the linear mapping - Support for userfaultfd write protection, which brings along some nice cleanups to our handling of invalid but present ptes - Extend our use of range TLBI invalidation at EL1 Perf and PMUs: - Ensure that the 'pmu->parent' pointer is correctly initialised by PMU drivers - Avoid allocating 'cpumask_t' types on the stack in some PMU drivers - Fix parsing of the CPU PMU "version" field in assembly code, as it doesn't follow the usual architectural rules - Add best-effort unwinding support for USER_STACKTRACE - Minor driver fixes and cleanups Selftests: - Minor cleanups to the arm64 selftests (missing NULL check, unused variable) Miscellaneous: - Add a command-line alias for disabling 32-bit application support - Add part number for Neoverse-V2 CPUs - Minor fixes and cleanups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits) arm64/mm: Fix pud_user_accessible_page() for PGTABLE_LEVELS <= 2 arm64/mm: Add uffd write-protect support arm64/mm: Move PTE_PRESENT_INVALID to overlay PTE_NG arm64/mm: Remove PTE_PROT_NONE bit arm64/mm: generalize PMD_PRESENT_INVALID for all levels arm64: simplify arch_static_branch/_jump function arm64: Add USER_STACKTRACE support arm64: Add the arm64.no32bit_el0 command line option drivers/perf: hisi: hns3: Actually use devm_add_action_or_reset() drivers/perf: hisi: hns3: Fix out-of-bound access when valid event group drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group kselftest: arm64: Add a null pointer check arm64: defer clearing DAIF.D arm64: assembler: update stale comment for disable_step_tsk arm64/sysreg: Update PIE permission encodings kselftest/arm64: Remove unused parameters in abi test perf/arm-spe: Assign parents for event_source device perf/arm-smmuv3: Assign parents for event_source device perf/arm-dsu: Assign parents for event_source device perf/arm-dmc620: Assign parents for event_source device ... -
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k updates from Geert Uytterhoeven: - Fix invalid context sleep and reboot hang on Mac - Fix spinlock race in kernel thread creation - Miscellaneous fixes and improvements - defconfig updates * tag 'm68k-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: defconfig: Update defconfigs for v6.9-rc1 m68k: Move ARCH_HAS_CPU_CACHE_ALIASING m68k: mac: Fix reboot hang on Mac IIci m68k: Fix spinlock race in kernel thread creation m68k: Let GENERIC_IOMAP depend on HAS_IOPORT m68k: amiga: Use str_plural() to fix Coccinelle warning macintosh/via-macii: Fix "BUG: sleeping function called from invalid context" zorro: Use helpers from ioport.h m68k: Calculate THREAD_SIZE from THREAD_SIZE_ORDER
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Merge in late fixes to prepare for the 6.10 net-next PR. Signed-off-by:
-
