Add the MST topology for a CRTC to the atomic state if the driver
needs to force a modeset on the CRTC after the encoder compute config
functions are called.

Later the MST encoder's disable hook also adds the state, but that isn't
guaranteed to work (since in that hook getting the state may fail, which
can't be handled there). This should fix that, while a later patch fixes
the use of the MST state in the disable hook.

v2: Add missing forward struct declartions, caught by hdrtest.
v3: Factor out intel_dp_mst_add_topology_state_for_connector() used
    later in the patchset.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # 6.1
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> # v2
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-1-imre.deak@intel.com

Add missing reg property and update example to add dsi top node.

Fixes: ef85db91 ("dt-bindings: display: panel: document the Visionox VTDR6130 AMOLED DSI Panel")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207-topic-sm8550-upstream-vtdr6130-bindings-fix-v1-1-0ba2323420c5@linaro.org

There are two flags attemting to guard connector polling:
poll_enabled and poll_running. While poll_enabled semantics is clearly
defined and fully adhered (mark that drm_kms_helper_poll_init() was
called and not finalized by the _fini() call), the poll_running flag
doesn't have such clearliness.

This flag is used only in drm_helper_probe_single_connector_modes() to
guard calling of drm_kms_helper_poll_enable, it doesn't guard the
drm_kms_helper_poll_fini(), etc. Change it to only be set if the polling
is actually running. Tie HPD enablement to this flag.

This fixes the following warning reported after merging the HPD series:

Hot plug detection already enabled
WARNING: CPU: 2 PID: 9 at drivers/gpu/drm/drm_bridge.c:1257 drm_bridge_hpd_enable+0x94/0x9c [drm]
Modules linked in: videobuf2_memops snd_soc_simple_card snd_soc_simple_card_utils fsl_imx8_ddr_perf videobuf2_common snd_soc_imx_spdif adv7511 etnaviv imx8m_ddrc imx_dcss mc cec nwl_dsi gov
CPU: 2 PID: 9 Comm: kworker/u8:0 Not tainted 6.2.0-rc2-15208-g25b283acd578 #6
Hardware name: NXP i.MX8MQ EVK (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_bridge_hpd_enable+0x94/0x9c [drm]
lr : drm_bridge_hpd_enable+0x94/0x9c [drm]
sp : ffff800009ef3740
x29: ffff800009ef3740 x28: ffff000009331f00 x27: 0000000000001000
x26: 0000000000000020 x25: ffff800001148ed8 x24: ffff00000a8fe000
x23: 00000000fffffffd x22: ffff000005086348 x21: ffff800001133ee0
x20: ffff00000550d800 x19: ffff000005086288 x18: 0000000000000006
x17: 0000000000000000 x16: ffff8000096ef008 x15: 97ffff2891004260
x14: 2a1403e194000000 x13: 97ffff2891004260 x12: 2a1403e194000000
x11: 7100385f29400801 x10: 0000000000000aa0 x9 : ffff800008112744
x8 : ffff000000250b00 x7 : 0000000000000003 x6 : 0000000000000011
x5 : 0000000000000000 x4 : ffff0000bd986a48 x3 : 0000000000000001
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000000250000
Call trace:
 drm_bridge_hpd_enable+0x94/0x9c [drm]
 drm_bridge_connector_enable_hpd+0x2c/0x3c [drm_kms_helper]
 drm_kms_helper_poll_enable+0x94/0x10c [drm_kms_helper]
 drm_helper_probe_single_connector_modes+0x1a8/0x510 [drm_kms_helper]
 drm_client_modeset_probe+0x204/0x1190 [drm]
 __drm_fb_helper_initial_config_and_unlock+0x5c/0x4a4 [drm_kms_helper]
 drm_fb_helper_initial_config+0x54/0x6c [drm_kms_helper]
 drm_fbdev_client_hotplug+0xd0/0x140 [drm_kms_helper]
 drm_fbdev_generic_setup+0x90/0x154 [drm_kms_helper]
 dcss_kms_attach+0x1c8/0x254 [imx_dcss]
 dcss_drv_platform_probe+0x90/0xfc [imx_dcss]
 platform_probe+0x70/0xcc
 really_probe+0xc4/0x2e0
 __driver_probe_device+0x80/0xf0
 driver_probe_device+0xe0/0x164
 __device_attach_driver+0xc0/0x13c
 bus_for_each_drv+0x84/0xe0
 __device_attach+0xa4/0x1a0
 device_initial_probe+0x1c/0x30
 bus_probe_device+0xa4/0xb0
 deferred_probe_work_func+0x90/0xd0
 process_one_work+0x200/0x474
 worker_thread+0x74/0x43c
 kthread+0xfc/0x110
 ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
Reported-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Fixes: c8268795 ("drm/probe-helper: enable and disable HPD on connectors")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Tested-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124104548.3234554-2-dmitry.baryshkov@linaro.org
(cherry picked from commit d33a54e3)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Extract drm_kms_helper_enable_hpd() and drm_kms_helper_disable_hpd(),
two helpers that enable and disable HPD handling on all device's
connectors.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124104548.3234554-1-dmitry.baryshkov@linaro.org
(cherry picked from commit cbf143b2)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Update according to new dma-buf locking scheme.

Remove redundant WARN_ON()'s, dma_buf functions internally
have the same warnings already.

Fixes: 647371a6 ("accel/ivpu: Add GEM buffer object management")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-5-stanislaw.gruszka@linux.intel.com
(cherry picked from commit ec6ec9c6)
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>

Avoid below spurious warning:

[  264.844029] DMA-API: intel_vpu 0000:00:0b.0: mapping sg segment longer than device claims to support [len=143360] [max=65536]
[  264.844038] WARNING: CPU: 0 PID: 1254 at kernel/dma/debug.c:1160 debug_dma_map_sg+0x6ca/0xb70

Fixes: 263b2ba5 ("accel/ivpu: Add Intel VPU MMU support")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-4-stanislaw.gruszka@linux.intel.com
(cherry picked from commit 07ccb63a)
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>

The VPU_JSM_MSG_CONTEXT_DELETE will remove any resources associated
with the SSID, that included any blobs create by the user space
application.

The command can also remove doorbell registrations, but since this
does not work in HW scheduling case, we do not depend on this
capability and unregister the doorbells explicitly.

Fixes: cd727221 ("accel/ivpu: Add command buffer submission logic")
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-3-stanislaw.gruszka@linux.intel.com
(cherry picked from commit 38257f51)
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>

FW API structures have been updated to fix misaligned
structure members.

Also changed JSM message header format to account for
future improvements.

Added explicit check for minimum supported JSM API version.

Fixes: 5d7422cf ("accel/ivpu: Add IPC driver and JSM messages")
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-2-stanislaw.gruszka@linux.intel.com
(cherry picked from commit 4ea1e504)
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>

In configurations with CONFIG_KUNIT=m, builting the unit test
into the kernel causes a link failure:

arm-linux-gnueabi-ld: drivers/gpu/drm/vc4/tests/vc4_mock.o: in function `__build_mock':
vc4_mock.c:(.text+0x6e): undefined reference to `kunit_do_failed_assertion'
arm-linux-gnueabi-ld: vc4_mock.c:(.text+0x9c): undefined reference to `kunit_do_failed_assertion'
arm-linux-gnueabi-ld: vc4_mock.c:(.text+0x100): undefined reference to `kunit_ptr_not_err_assert_format'
...

Allow this to be a loadable module as well to have Kconfig
sort out the dependencies correctly.

Fixes: f759f5b5 ("drm/vc4: tests: Introduce a mocking infrastructure")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230202102346.868771-1-arnd@kernel.orgSigned-off-by: Maxime Ripard <maxime@cerno.tech>

scripts/kernel-doc complains about the comment for hotplug_failed,
so fix it:

include/drm/drm_client.h:111: warning: Incorrect use of kernel-doc format:          * @hotplug failed:

Fixes: 6a9d5ad3 ("drm/client: Add hotplug_failed flag")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131012107.20943-1-rdunlap@infradead.org

With extra warnings enabled, gcc warns about two assignments
of the same .mmap callback:

In file included from drivers/accel/ivpu/ivpu_drv.c:10:
include/drm/drm_accel.h:31:27: error: initialized field overwritten [-Werror=override-init]
   31 |         .mmap           = drm_gem_mmap
      |                           ^~~~~~~~~~~~
drivers/accel/ivpu/ivpu_drv.c:360:9: note: in expansion of macro 'DRM_ACCEL_FOPS'
  360 |         DRM_ACCEL_FOPS,
      |         ^~~~~~~~~~~~~~

Remove the unused local assignment.

Fixes: e868cc59 ("accel: Add .mmap to DRM_ACCEL_FOPS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126163804.3648051-2-arnd@kernel.org
(cherry picked from commit 918b8f7e)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

At the moment, accel drivers can be built-in even with CONFIG_DRM=m,
but this causes a link failure:

x86_64-linux-ld: drivers/accel/ivpu/ivpu_drv.o: in function `ivpu_dev_init':
ivpu_drv.c:(.text+0x1535): undefined reference to `drmm_kmalloc'
x86_64-linux-ld: ivpu_drv.c:(.text+0x1562): undefined reference to `drmm_kmalloc'
x86_64-linux-ld: drivers/accel/ivpu/ivpu_drv.o: in function `ivpu_remove':
ivpu_drv.c:(.text+0x1faa): undefined reference to `drm_dev_unregister'
x86_64-linux-ld: drivers/accel/ivpu/ivpu_drv.o: in function `ivpu_probe':
ivpu_drv.c:(.text+0x1fef): undefined reference to `__devm_drm_dev_alloc'

The problem is that DRM_ACCEL is a 'bool' symbol, so driver that
only depend on DRM_ACCEL but not also on DRM do not see the restriction
to =m configs.

To ensure that each accel driver has an implied dependency on CONFIG_DRM,
enclose the entire Kconfig file in an if/endif check.

Fixes: 8bf48897 ("drivers/accel: define kconfig and register a new major")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127221504.2522909-1-arnd@kernel.org
(cherry picked from commit 3524c96a)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Once we create the handle, the handle owns the reference.  Currently
nothing was doing anything with the shmem ptr after the handle was
created, but let's change drm_gem_shmem_create_with_handle() to not
return the pointer, so-as to not encourage problematic use of this
function in the future.  As a bonus, it makes the code a bit cleaner.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123154831.3191821-1-robdclark@gmail.com
(cherry picked from commit d023d6f7)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

In dma_fence_allocate_private_stub() set the signaling bit of the newly
allocated private stub fence rather than the signaling bit of the
shared dma_fence_stub.

Fixes: c85d00d4 ("dma-buf: set signaling bit for the stub fence")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126002844.339593-1-dakr@redhat.com
(cherry picked from commit 851a4a77)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

The devm_memremap() function doesn't return NULL, it returns error
pointers.

Fixes: 9a10c7e6 ("drm/simpledrm: Add support for system memory framebuffers")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9JHzImRcUaa0mi1@kili
(cherry picked from commit e566507b)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Due to holidays we started -next with more -fixes in-flight than
usual, and people have been asking where they are. Backmerge to get
things better in sync.

Conflicts:
- Tiny conflict in drm_fbdev_generic.c between variable rename and
  missing error handling that got added.
- Conflict in drm_fb_helper.c between the added call to vgaswitcheroo
  in drm_fb_helper_single_fb_probe and a refactor patch that extracted
  lots of helpers and incidentally removed the dev local variable.
  Readd it to make things compile.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

amd-drm-next-6.3-2023-01-27:

amdgpu:
- GC11 fixes
- SMU13 fixes
- Freesync fixes
- DP MST fixes
- DP MST code rework and cleanup
- AV1 fixes for VCN4
- DCN 3.2.x fixes
- PSR fixes
- DML optimizations
- DC link code rework
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127225917.2419162-1-alexander.deucher@amd.com

drm/tegra: Changes for v6.3-rc1

This set of changes includes a rework of the custom syncpoint interrupt
code to take better advantage of existing DRM/KMS infrastructure.

There's also various bits of cleanup and fixes included.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127170119.495943-1-thierry.reding@gmail.com

Merge tag 'drm-next-20230127' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux into drm-next

Renesas R-Car DU fixes and improvements
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9QCw3SkHm6k1bwJ@pendragon.ideasonboard.com

drm/i915 feature pull #2 v6.3:

Features and functionality:
- Enable HF-EEODB by switching HDMI, DP and LVDS to use struct drm_edid (Jani)
- Start using unversioned DMC firmware paths for new platforms (Gustavo)

Refactoring and cleanups:
- ELD refactor: Stop using hardware buffer, precompute ELD, and wire up ELD in
  the state checker (Ville)
- Use generics for debugfs device parameters (Jani)
- DSB refactoring and fixes (Ville)
- Header refactoring, add new intel_display_limits.h (Jani)
- Split out GMCH code to a new file (Jani)
- Split out vblank code to a new file (Jani)
- i915_drv.h and struct drm_i915_private cleanups (Jani)
- Simplify FBC and DRRS debug attributes (Deepak R Varma)
- Remove some single-use macros (Rodrigo)

Fixes:
- Fix scaler limits for display versions 12 and 13 (Luca)
- Fix plane source size check for zero height (Drew Davenport)
- Implement PSR2 selective fetch workaround (Jouni)
- Expand a PSR workaound to more platforms and pipes (Jouni)
- Expand an HDMI infoframe workaround to all MTL steppings (Jouni)
- Enable PIPEDMC whenever its corresponding pipe is enabled (Imre)

Merges:
- Backmerge drm-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87tu0c44gv.fsf@intel.com

Merge tag 'drm-habanalabs-next-2023-01-26' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next

This tag contains habanalabs driver and accel changes for v6.3:

- Moved the driver to the accel subsystem. Currently only the files were
  moved (including the uapi file which was also renamed). This doesn't
  include registering to the accel subsystem. This will probably be only
  in the next kernel version.

- In case of decoder error (axi error) in Gaudi2, we can now find the exact
  IP that initiated the erroneous transaction and print the details for
  better debug.

- Add more trace events. We now can trace mmio transactions and communication
  with the preboot firmware.

- Add to Gaudi2 support for abrupt reset that is done by the firmware. This
  was support so far only for Gaudi1.

- Add uAPI to flush memory transactions (to the device memory). This is
  needed by the communications library in case of doing p2p with a host NIC
  which access our HBM directly through the PCI BAR.

- Add uAPI to pass-through a request from user-space to firmware and get the
  result back to user-space. This will allow the driver code to avoid the
  need to add new packet (in the communication channel with the firmware) for
  every new request type.

- Remove the option to export dma-buf by memory allocation handle in our uAPI.
  This was planned for Gaudi2 but was never used. Instead, we will do export
  by memory address (same as Gaudi1). In addition, we added the option to
  specify an offset to the address. This is needed in Gaudi2 because there
  the user allocates the entire HBM in one allocation, but would like to
  export only small part of it.

- Multiple bug fixes, refactors and small optimizations.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126213317.GA1520525@ogabbay-vm-u20.habana-labs.com

drm-misc-next for v6.3:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

 * fbdev-helper: Streamline code in generic fbdev and its helpers

 * TTM: Fixes plus their reverts

Driver Changes:

 * accel/ivpu: Typo fixes

 * i915: TTM-related fixes

 * nouveau: Remove unused return value from disable helper
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9I2nOzHxTxPeTjg@linux-uq9g

Pull irq fix from Borislav Petkov:

 - Cleanup the firmware node for the new IRQ MSI domain properly, to
   avoid leaking memory

* tag 'irq_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/msi: Free the fwnode created by msi_create_device_irq_domain()

Pull x86 fixes from Borislav Petkov:

 - Start checking for -mindirect-branch-cs-prefix clang support too now
   that LLVM 16 will support it

 - Fix a NULL ptr deref when suspending with Xen PV

 - Have a SEV-SNP guest check explicitly for features enabled by the
   hypervisor and fail gracefully if some are unsupported by the guest
   instead of failing in a non-obvious and hard-to-debug way

 - Fix a MSI descriptor leakage under Xen

 - Mark Xen's MSI domain as supporting MSI-X

 - Prevent legacy PIC interrupts from being resent in software by
   marking them level triggered, as they should be, which lead to a NULL
   ptr deref

* tag 'x86_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Move '-mindirect-branch-cs-prefix' out of GCC-only block
  acpi: Fix suspend with Xen PV
  x86/sev: Add SEV-SNP guest feature negotiation support
  x86/pci/xen: Fixup fallout from the PCI/MSI overhaul
  x86/pci/xen: Set MSI_FLAG_PCI_MSIX support in Xen MSI domain
  x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL

Pull input fixes from Dmitry Torokhov:

 - touchpads on HP 15-* laptops switched back to PS/2 emulation mode

 - a quirk for Clevo PCX0DX/TUXEDO XP1511 to make sure keyboard is
   responding after resume

* tag 'input-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Clevo PCX0DX to i8042 quirk table
  Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode"

Pull cxl fixes from Dan Williams:
 "A couple of fixes for bugs introduced during the merge window. One is
  a regression, the other was a bug in the CXL AER handler:

   - Fix a crash regression due to module load order of cxl_pmem.ko

   - Fix wrong register offset read in CXL AER handling path"

* tag 'cxl-fixes-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/pmem: Fix nvdimm unregistration when cxl_pmem driver is absent
  cxl: fix cxl_report_and_clear() RAS UE addr mis-assignment

This reverts commit 7efc3b72.

We have got openSUSE reports (Link 1) for 6.1 kernel with khugepaged
stalling CPU for long periods of time.  Investigation of tracepoint data
shows that compaction is stuck in repeating fast_find_migrateblock()
based migrate page isolation, and then fails to migrate all isolated
pages.

Commit 7efc3b72 ("mm/compaction: fix set skip in fast_find_migrateblock")
was suspected as it was merged in 6.1 and in theory can indeed remove a
termination condition for fast_find_migrateblock() under certain
conditions, as it removes a place that always marks a scanned pageblock
from being re-scanned.  There are other such places, but those can be
skipped under certain conditions, which seems to match the tracepoint
data.

Testing of revert also appears to have resolved the issue, thus revert
the commit until a more robust solution for the original problem is
developed.

It's also likely this will fix qemu stalls with 6.1 kernel reported in
Link 2, but that is not yet confirmed.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1206848
Link: https://lore.kernel.org/kvm/b8017e09-f336-3035-8344-c549086c2340@kernel.org/
Link: https://lore.kernel.org/lkml/20230125134434.18017-1-mgorman@techsingularity.net/
Fixes: 7efc3b72 ("mm/compaction: fix set skip in fast_find_migrateblock")
Cc: <stable@vger.kernel.org>
Tested-by: Pedro Falcato <pedro.falcato@gmail.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Joe found another DT file that shouldn't be executable, and that
frustrated me enough that I went hunting with this script:

    git ls-files -s |
        grep '^100755' |
        cut -f2 |
        xargs grep -L '^#!'

and that found another file that shouldn't have been marked executable
either, despite being in the scripts directory.

Maybe these two are the last ones at least for now.  But I'm sure we'll
be back in a few years, fixing things up again.

Fixes: 8c6789f4 ("ASoC: dt-bindings: Add Everest ES8326 audio CODEC")
Fixes: 4d8e5cd2 ("locking/atomics: Fix scripts/atomic/ script permissions")
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ksmbd server fixes from Steve French:
 "Four smb3 server fixes, all also for stable:

   - fix for signing bug

   - fix to more strictly check packet length

   - add a max connections parm to limit simultaneous connections

   - fix error message flood that can occur with newer Samba xattr
     format"

* tag '6.2-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: downgrade ndr version error message to debug
  ksmbd: limit pdu length size according to connection status
  ksmbd: do not sign response to session request for guest login
  ksmbd: add max connections parameter

Pull cifs fix from Steve French:
 "Fix for reconnect oops in smbdirect (RDMA), also is marked for stable"

* tag '6.2-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix oops due to uncleared server->smbd_conn in reconnect

Pull block fixes from Jens Axboe:
 "Minor tweaks for this release:

   - NVMe pull request via Christoph:
        - Flush initial scan_work for async probe (Keith Busch)
        - Fix passthrough csi check (Keith Busch)
        - Fix nvme-fc initialization order (Ross Lagerwall)

   - Fix for tearing down non-started device in ublk (Ming)"

* tag 'block-6.2-2023-01-27' of git://git.kernel.dk/linux:
  block: ublk: move ublk_chr_class destroying after devices are removed
  nvme: fix passthrough csi check
  nvme-pci: flush initial scan_work for async probe
  nvme-fc: fix initialization order

Pull io_uring fixes from Jens Axboe:
 "Two small fixes for this release:

   - Sanitize how async prep is done for drain requests, so we ensure
     that it always gets done (Dylan)

   - A ring provided buffer recycling fix for multishot receive (me)"

* tag 'io_uring-6.2-2023-01-27' of git://git.kernel.dk/linux:
  io_uring: always prep_async for drain requests
  io_uring/net: cache provided buffer group value for multishot receives

Pull hardening fixes from Kees Cook:

 - Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST

 - Reorganize gcc-plugin includes for GCC 13

 - Silence bcache memcpy run-time false positive warnings

* tag 'hardening-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  bcache: Silence memcpy() run-time false positive warnings
  gcc-plugins: Reorganize gimple includes for GCC 13
  kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST

Pull tracing fixes from Steven Rostedt:

 - Fix filter memory leak by calling ftrace_free_filter()

 - Initialize trace_printk() earlier so that ftrace_dump_on_oops shows
   data on early crashes.

 - Update the outdated instructions in scripts/tracing/ftrace-bisect.sh

 - Add lockdep_is_held() to fix lockdep warning

 - Add allocation failure check in create_hist_field()

 - Don't initialize pointer that gets set right away in enabled_monitors_write()

 - Update MAINTAINER entries

 - Fix help messages in Kconfigs

 - Fix kernel-doc header for update_preds()

* tag 'trace-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  bootconfig: Update MAINTAINERS file to add tree and mailing list
  rv: remove redundant initialization of pointer ptr
  ftrace: Maintain samples/ftrace
  tracing/filter: fix kernel-doc warnings
  lib: Kconfig: fix spellos
  trace_events_hist: add check for return value of 'create_hist_field'
  tracing/osnoise: Use built-in RCU list checking
  tracing: Kconfig: Fix spelling/grammar/punctuation
  ftrace/scripts: Update the instructions for ftrace-bisect.sh
  tracing: Make sure trace_printk() can output as soon as it can be used
  ftrace: Export ftrace_free_filter() to modules

This fixes the build here locally on my 32-bit arm build.
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit f439a959)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull i2c fixes from Wolfram Sang:
 "A bunch of driver fixes with a tiny bit of new IDs"

* tag 'i2c-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: rk3x: fix a bunch of kernel-doc warnings
  i2c: axxia: use 'struct' for kernel-doc notation
  dt-bindings: i2c: renesas,rzv2m: Fix SoC specific string
  i2c: mxs: suppress probe-deferral error message
  i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU
  i2c: designware: Fix unbalanced suspended flag
  i2c: designware: use casting of u64 in clock multiplication to avoid overflow

Pull gpio fixes from Bartosz Golaszewski:

 - fix the -c option in the gpio-event-mode user-space example program

 - fix the irq number translation in gpio-ep93xx and make its irqchip
   immutable

 - add a missing spin_unlock in error path in gpio-mxc

 - fix a suspend breakage on System76 and Lenovo Gen2a introduced in
   GPIO ACPI

* tag 'gpio-fixes-for-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  tools: gpio: fix -c option of gpio-event-mon
  gpio: ep93xx: remove unused variable
  gpio: ep93xx: Make irqchip immutable
  gpio: ep93xx: Fix port F hwirq numbers in handler
  gpio: mxc: Unlock on error path in mxc_flip_edge()
  gpiolib-acpi: Don't set GPIOs for wakeup in S3 mode

Merge tag 'regulator-fix-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "A fix for the DT binding documentation which dropped a property when
  being converted to YAML format causing spurious errors validating
  device trees for platforms using the device"

* tag 'regulator-fix-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: dt-bindings: samsung,s2mps14: add lost samsung,ext-control-gpios

Pull overlayfs fixes from Miklos Szeredi:
 "Fix two bugs, a recent one introduced in the last cycle, and an older
  one from v5.11"

* tag 'ovl-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fail on invalid uid/gid mapping at copy up
  ovl: fix tmpfile leak