- 06 Mar, 2016 4 commits
-
-
Nicholas Bellinger authored
commit febe562c upstream. This patch fixes a NULL pointer se_cmd->cmd_kref < 0 refcount bug during TMR LUN_RESET with active se_cmd I/O, that can be triggered during se_cmd descriptor shutdown + release via core_tmr_drain_state_list() code. To address this bug, add common __target_check_io_state() helper for ABORT_TASK + LUN_RESET w/ CMD_T_COMPLETE checking, and set CMD_T_ABORTED + obtain ->cmd_kref for both cases ahead of last target_put_sess_cmd() after TFO->aborted_task() -> transport_cmd_finish_abort() callback has completed. It also introduces SCF_ACK_KREF to determine when transport_cmd_finish_abort() needs to drop the second extra reference, ahead of calling target_put_sess_cmd() for the final kref_put(&se_cmd->cmd_kref). It also updates transport_cmd_check_stop() to avoid holding se_cmd->t_state_lock while dropping se_cmd device state via target_remove_from_state_list(), now that core_tmr_drain_state_list() is holding the se_device lock while checking se_cmd state from within TMR logic. Finally, move transport_put_cmd() release of SGL + TMR + extended CDB memory into target_free_cmd_mem() in order to avoid potential resource leaks in TMR ABORT_TASK + LUN_RESET code-paths. Also update target_release_cmd_kref() accordingly. Reviewed-by:
Quinn Tran <quinn.tran@qlogic.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Jan Engelhardt authored
[ Upstream commit d94e5a61 ] target_core_sbc's compare_and_write functionality suffers from taking data at the wrong memory location when writing a CAW request to disk when a SGL offset is non-zero. This can happen with loopback and vhost-scsi fabric drivers when SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC is used to map existing user-space SGL memory into COMPARE_AND_WRITE READ/WRITE payload buffers. Given the following sample LIO subtopology, % targetcli ls /loopback/ o- loopback ................................. [1 Target] o- naa.6001405ebb8df14a ....... [naa.60014059143ed2b3] o- luns ................................... [2 LUNs] o- lun0 ................ [iblock/ram0 (/dev/ram0)] o- lun1 ................ [iblock/ram1 (/dev/ram1)] % lsscsi -g [3:0:1:0] disk LIO-ORG IBLOCK 4.0 /dev/sdc /dev/sg3 [3:0:1:1] disk LIO-ORG IBLOCK 4.0 /dev/sdd /dev/sg4 the following bug can be observed in Linux 4.3 and 4.4~rc1: % perl -e 'print chr$_ for 0..255,reverse 0..255' >rand % perl -e 'print "\0" x 512' >zero % cat rand >/dev/sdd % sg_compare_and_write -i rand -D zero --lba 0 /dev/sdd % sg_compare_and_write -i zero -D rand --lba 0 /dev/sdd Miscompare reported % hexdump -Cn 512 /dev/sdd 00000000 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00000200 Rather than writing all-zeroes as instructed with the -D file, it corrupts the data in the sector by splicing some of the original bytes in. The page of the first entry of cmd->t_data_sg includes the CDB, and sg->offset is set to a position past the CDB. I presume that sg->offset is also the right choice to use for subsequent sglist members. Signed-off-by:
Jan Engelhardt <jengelh@netitwork.de> Tested-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Nicholas Bellinger authored
[ Upstream commit 057085e5 ] This patch addresses a race + use after free where the first stage of COMPARE_AND_WRITE in compare_and_write_callback() is rescheduled after the backend sends the secondary WRITE, resulting in second stage compare_and_write_post() callback completing in target_complete_ok_work() before the first can return. Because current code depends on checking se_cmd->se_cmd_flags after return from se_cmd->transport_complete_callback(), this results in first stage having SCF_COMPARE_AND_WRITE_POST set, which incorrectly falls through into second stage CAW processing code, eventually triggering a NULL pointer dereference due to use after free. To address this bug, pass in a new *post_ret parameter into se_cmd->transport_complete_callback(), and depend upon this value instead of ->se_cmd_flags to determine when to return or fall through into ->queue_status() code for CAW. Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Nicholas Bellinger authored
[ Upstream commit ca82c2bd ] This patch addresses a case where iscsi_target_do_tx_login_io() fails sending the last login response PDU, after the RX/TX threads have already been started. The case centers around iscsi_target_rx_thread() not invoking allow_signal(SIGINT) before the send_sig(SIGINT, ...) occurs from the failure path, resulting in RX thread hanging indefinately on iscsi_conn->rx_login_comp. Note this bug is a regression introduced by: commit e5419865 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Wed Jul 22 23:14:19 2015 -0700 iscsi-target: Fix iscsit_start_kthreads failure OOPs To address this bug, complete ->rx_login_complete for good measure in the failure path, and immediately return from RX thread context if connection state did not actually reach full feature phase (TARG_CONN_STATE_LOGGED_IN). Cc: Sagi Grimberg <sagig@mellanox.com> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
-
- 04 Mar, 2016 36 commits
-
-
Sasha Levin authored
Signed-off-by: -
Neil Horman authored
[ Upstream commit d9749fb5 ] Dmitry Vyukov noted recently that the sctp_port_hashtable had an error in its size computation, observing that the current method never guaranteed that the hashsize (measured in number of entries) would be a power of two, which the input hash function for that table requires. The root cause of the problem is that two values need to be computed (one, the allocation order of the storage requries, as passed to __get_free_pages, and two the number of entries for the hash table). Both need to be ^2, but for different reasons, and the existing code is simply computing one order value, and using it as the basis for both, which is wrong (i.e. it assumes that ((1<<order)*PAGE_SIZE)/sizeof(bucket) is still ^2 when its not). To fix this, we change the logic slightly. We start by computing a goal allocation order (which is limited by the maximum size hash table we want to support. Then we attempt to allocate that size table, decreasing the order until a successful allocation is made. Then, with the resultant successful order we compute the number of buckets that hash table supports, which we then round down to the nearest power of two, giving us the number of entries the table actually supports. I've tested this locally here, using non-debug and spinlock-debug kernels, and the number of entries in the hashtable consistently work out to be powers of two in all cases. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> CC: Dmitry Vyukov <dvyukov@google.com> CC: Vladislav Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dmitry V. Levin authored
[ Upstream commit b5f05492 ] The value passed by unix_diag_get_exact to unix_lookup_by_ino has type __u32, but unix_lookup_by_ino's argument ino has type int, which is not a problem yet. However, when ino is compared with sock_i_ino return value of type unsigned long, ino is sign extended to signed long, and this results to incorrect comparison on 64-bit architectures for inode numbers greater than INT_MAX. This bug was found by strace test suite. Fixes: 5d3cae8b ("unix_diag: Dumping exact socket core") Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Anton Protopopov authored
[ Upstream commit a97eb33f ] An error response from a RTM_GETNETCONF request can return the positive error value EINVAL in the struct nlmsgerr that can mislead userspace. Signed-off-by:
Anton Protopopov <a.s.protopopov@gmail.com> Acked-by:
-
Xin Long authored
[ Upstream commit deed49df ] Since the gc of ipv4 route was removed, the route cached would has no chance to be removed, and even it has been timeout, it still could be used, cause no code to check it's expires. Fix this issue by checking and removing route cache when we get route. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 29e73269 ] Drop reference on the relay_po socket when __pppoe_xmit() succeeds. This is already handled correctly in the error path. Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Mark Tomlinson authored
[ Upstream commit 853effc5 ] A previous commit (33f72e6f) added notification via netlink for tunnels when created/modified/deleted. If the notification returned an error, this error was returned from the tunnel function. If there were no listeners, the error code ESRCH was returned, even though having no listeners is not an error. Other calls to this and other similar notification functions either ignore the error code, or filter ESRCH. This patch checks for ESRCH and does not flag this as an error. Reviewed-by:
Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by:
Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by:
-
Eugenia Emantayev authored
[ Upstream commit 925ab1aa ] It's forbidden to manually change dev->features in run-time. Currently, this is done in the driver to make sure that GSO_UDP_TUNNEL is advertized only when VXLAN tunnel is set. However, since the stack actually does features intersection with hw_enc_features, we can safely revert to advertizing features early when registering the netdevice. Fixes: f4a1edd5 ('net/mlx4_en: Advertize encapsulation offloads [...]') Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Eugenia Emantayev authored
[ Upstream commit 31c128b6 ] Previously, the shift value used for time-stamping was constant and didn't depend on the HW chip frequency. Change that to take the frequency into account and calculate the maximal value in cycles per wraparound of ten seconds. This time slot was chosen since it gives a good accuracy in time synchronization. Algorithm for shift value calculation: * Round up the maximal value in cycles to nearest power of two * Calculate maximal multiplier by division of all 64 bits set to above result * Then, invert the function clocksource_khz2mult() to get the shift from maximal mult value Fixes: ec693d47 ('net/mlx4_en: Add HW timestamping (TS) support') Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Amir Vadai authored
[ Upstream commit 281e8b2f ] RdropOvflw counts overrun of HW buffer, therefore should be used for rx_fifo_errors only. Currently RdropOvflw counter is mistakenly also set into rx_missed_errors and rx_over_errors too, which makes the device total dropped packets accounting to show wrong results. Fix that. Use it for rx_fifo_errors only. Fixes: c27a02cd ('mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC') Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit aac8d3c2 ] Thomas reports: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05c6 ProdID=6001 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Reported-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Rainer Weikusat authored
[ Upstream commit a5527dda ] The unix_dgram_sendmsg routine use the following test if (unlikely(unix_peer(other) != sk && unix_recvq_full(other))) { to determine if sk and other are in an n:1 association (either established via connect or by using sendto to send messages to an unrelated socket identified by address). This isn't correct as the specified address could have been bound to the sending socket itself or because this socket could have been connected to itself by the time of the unix_peer_get but disconnected before the unix_state_lock(other). In both cases, the if-block would be entered despite other == sk which might either block the sender unintentionally or lead to trying to unlock the same spin lock twice for a non-blocking send. Add a other != sk check to guard against this. Fixes: 7d267278 ("unix: avoid use-after-free in ep_remove_wait_queue") Reported-By:
Philipp Hahn <pmhahn@pmhahn.de> Signed-off-by:
Rainer Weikusat <rweikusat@mobileactivedefense.com> Tested-by:
-
Eric Dumazet authored
[ Upstream commit 91948309 ] Dmitry reported memory leaks of IP options allocated in ip_cmsg_send() when/if this function returns an error. Callers are responsible for the freeing. Many thanks to Dmitry for the report and diagnostic. Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jay Vosburgh authored
[ Upstream commit 21a75f09 ] The current logic in bond_arp_rcv will accept an incoming ARP for validation if (a) the receiving slave is either "active" (which includes the currently active slave, or the current ARP slave) or, (b) there is a currently active slave, and it has received an ARP since it became active. For case (b), the receiving slave isn't the currently active slave, and is receiving the original broadcast ARP request, not an ARP reply from the target. This logic can fail if there is no currently active slave. In this situation, the ARP probe logic cycles through all slaves, assigning each in turn as the "current_arp_slave" for one arp_interval, then setting that one as "active," and sending an ARP probe from that slave. The current logic expects the ARP reply to arrive on the sending current_arp_slave, however, due to switch FDB updating delays, the reply may be directed to another slave. This can arise if the bonding slaves and switch are working, but the ARP target is not responding. When the ARP target recovers, a condition may result wherein the ARP target host replies faster than the switch can update its forwarding table, causing each ARP reply to be sent to the previous current_arp_slave. This will never pass the logic in bond_arp_rcv, as neither of the above conditions (a) or (b) are met. Some experimentation on a LAN shows ARP reply round trips in the 200 usec range, but my available switches never update their FDB in less than 4000 usec. This patch changes the logic in bond_arp_rcv to additionally accept an ARP reply for validation on any slave if there is a current ARP slave and it sent an ARP probe during the previous arp_interval. Fixes: aeea64ac ("bonding: don't trust arp requests unless active slave really works") Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit a1b14d27 ] When ctx access is used, the kernel often needs to expand/rewrite instructions, so after that patching, branch offsets have to be adjusted for both forward and backward jumps in the new eBPF program, but for backward jumps it fails to account the delta. Meaning, for example, if the expansion happens exactly on the insn that sits at the jump target, it doesn't fix up the back jump offset. Analysis on what the check in adjust_branches() is currently doing: /* adjust offset of jmps if necessary */ if (i < pos && i + insn->off + 1 > pos) insn->off += delta; else if (i > pos && i + insn->off + 1 < pos) insn->off -= delta; First condition (forward jumps): Before: After: insns[0] insns[0] insns[1] <--- i/insn insns[1] <--- i/insn insns[2] <--- pos insns[P] <--- pos insns[3] insns[P] `------| delta insns[4] <--- target_X insns[P] `-----| insns[5] insns[3] insns[4] <--- target_X insns[5] First case is if we cross pos-boundary and the jump instruction was before pos. This is handeled correctly. I.e. if i == pos, then this would mean our jump that we currently check was the patchlet itself that we just injected. Since such patchlets are self-contained and have no awareness of any insns before or after the patched one, the delta is correctly not adjusted. Also, for the second condition in case of i + insn->off + 1 == pos, means we jump to that newly patched instruction, so no offset adjustment are needed. That part is correct. Second condition (backward jumps): Before: After: insns[0] insns[0] insns[1] <--- target_X insns[1] <--- target_X insns[2] <--- pos <-- target_Y insns[P] <--- pos <-- target_Y insns[3] insns[P] `------| delta insns[4] <--- i/insn insns[P] `-----| insns[5] insns[3] insns[4] <--- i/insn insns[5] Second interesting case is where we cross pos-boundary and the jump instruction was after pos. Backward jump with i == pos would be impossible and pose a bug somewhere in the patchlet, so the first condition checking i > pos is okay only by itself. However, i + insn->off + 1 < pos does not always work as intended to trigger the adjustment. It works when jump targets would be far off where the delta wouldn't matter. But, for example, where the fixed insn->off before pointed to pos (target_Y), it now points to pos + delta, so that additional room needs to be taken into account for the check. This means that i) both tests here need to be adjusted into pos + delta, and ii) for the second condition, the test needs to be <= as pos itself can be a target in the backjump, too. Fixes: 9bac3d6d ("bpf: allow extended BPF programs access skb fields") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Alexander Duyck authored
[ Upstream commit 78565208 ] This patch corrects the unaligned accesses seen on GRE TEB tunnels when generating hash keys. Specifically what this patch does is make it so that we force the use of skb_copy_bits when the GRE inner headers will be unaligned due to NET_IP_ALIGNED being a non-zero value. Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Acked-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Alexander Duyck authored
[ Upstream commit 461547f3, since we lack the flow dissector flags in this release we guard the flow label access using a test on 'skb' being NULL ] This patch fixes an issue with unaligned accesses when using eth_get_headlen on a page that was DMA aligned instead of being IP aligned. The fact is when trying to check the length we don't need to be looking at the flow label so we can reorder the checks to first check if we are supposed to gather the flow label and then make the call to actually get it. v2: Updated path so that either STOP_AT_FLOW_LABEL or KEY_FLOW_LABEL can cause us to check for the flow label. Reported-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 7a84bd46 ] Commit ed5a377d ("sctp: translate host order to network order when setting a hmacid") corrected the hmacid byte-order when setting a hmacid. but the same issue also exists on getting a hmacid. We fix it by changing hmacids to host order when users get them with getsockopt. Fixes: Commit ed5a377d ("sctp: translate host order to network order when setting a hmacid") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Siva Reddy Kallam authored
[ Upstream commit b7d98729 ] tg3_tso_bug() can hit a condition where the entire tx ring is not big enough to segment the GSO packet. For example, if MSS is very small, gso_segs can exceed the tx ring size. When we hit the condition, it will cause tx timeout. tg3_tso_bug() is called to handle TSO and DMA hardware bugs. For TSO bugs, if tg3_tso_bug() cannot succeed, we have to drop the packet. For DMA bugs, we can still fall back to linearize the SKB and let the hardware transmit the TSO packet. This patch adds a function tg3_tso_bug_gso_check() to check if there are enough tx descriptors for GSO before calling tg3_tso_bug(). The caller will then handle the error appropriately - drop or lineraize the SKB. v2: Corrected patch description to avoid confusion. Signed-off-by:
Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Acked-by:
Prashant Sreedharan <prashant@broadcom.com> Signed-off-by:
-
Hans Westgaard Ry authored
[ Upstream commit 5f74f82e ] Devices may have limits on the number of fragments in an skb they support. Current codebase uses a constant as maximum for number of fragments one skb can hold and use. When enabling scatter/gather and running traffic with many small messages the codebase uses the maximum number of fragments and may thereby violate the max for certain devices. The patch introduces a global variable as max number of fragments. Signed-off-by:
Hans Westgaard Ry <hans.westgaard.ry@oracle.com> Reviewed-by:
Håkon Bugge <haakon.bugge@oracle.com> Acked-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 415e3d3e ] The commit referenced in the Fixes tag incorrectly accounted the number of in-flight fds over a unix domain socket to the original opener of the file-descriptor. This allows another process to arbitrary deplete the original file-openers resource limit for the maximum of open files. Instead the sending processes and its struct cred should be credited. To do so, we add a reference counted struct user_struct pointer to the scm_fp_list and use it to account for the number of inflight unix fds. Fixes: 712f4aad ("unix: properly account for FDs passed over unix sockets") Reported-by:
David Herrmann <dh.herrmann@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 44c3d0c1 ] Silence lockdep false positive about rcu_dereference() being used in the wrong context. First one should use rcu_dereference_protected() as we own the spinlock. Second one should be a normal assignation, as no barrier is needed. Fixes: 18367681 ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.") Reported-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
subashab@codeaurora.org authored
[ Upstream commit 16186a82 ] A rcu stall with the following backtrace was seen on a system with forwarding, optimistic_dad and use_optimistic set. To reproduce, set these flags and allow ipv6 autoconf. This occurs because the device write_lock is acquired while already holding the read_lock. Back trace below - INFO: rcu_preempt self-detected stall on CPU { 1} (t=2100 jiffies g=3992 c=3991 q=4471) <6> Task dump for CPU 1: <2> kworker/1:0 R running task 12168 15 2 0x00000002 <2> Workqueue: ipv6_addrconf addrconf_dad_work <6> Call trace: <2> [<ffffffc000084da8>] el1_irq+0x68/0xdc <2> [<ffffffc000cc4e0c>] _raw_write_lock_bh+0x20/0x30 <2> [<ffffffc000bc5dd8>] __ipv6_dev_ac_inc+0x64/0x1b4 <2> [<ffffffc000bcbd2c>] addrconf_join_anycast+0x9c/0xc4 <2> [<ffffffc000bcf9f0>] __ipv6_ifa_notify+0x160/0x29c <2> [<ffffffc000bcfb7c>] ipv6_ifa_notify+0x50/0x70 <2> [<ffffffc000bd035c>] addrconf_dad_work+0x314/0x334 <2> [<ffffffc0000b64c8>] process_one_work+0x244/0x3fc <2> [<ffffffc0000b7324>] worker_thread+0x2f8/0x418 <2> [<ffffffc0000bb40c>] kthread+0xe0/0xec v2: do addrconf_dad_kick inside read lock and then acquire write lock for ipv6_ifa_notify as suggested by Eric Fixes: 7fd2561e ("net: ipv6: Add a sysctl to make optimistic addresses useful candidates") Cc: Eric Dumazet <edumazet@google.com> Cc: Erik Kline <ek@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Acked-by:
-
Hangbin Liu authored
[ Upstream commit 8013d1d7 ] Commit 6fd99094 ("ipv6: Don't reduce hop limit for an interface") disabled accept hop limit from RA if it is smaller than the current hop limit for security stuff. But this behavior kind of break the RFC definition. RFC 4861, 6.3.4. Processing Received Router Advertisements A Router Advertisement field (e.g., Cur Hop Limit, Reachable Time, and Retrans Timer) may contain a value denoting that it is unspecified. In such cases, the parameter should be ignored and the host should continue using whatever value it is already using. If the received Cur Hop Limit value is non-zero, the host SHOULD set its CurHopLimit variable to the received value. So add sysctl option accept_ra_min_hop_limit to let user choose the minimum hop limit value they can accept from RA. And set default to 1 to meet RFC standards. Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 1cdda918 ] Currently, the egress interface index specified via IPV6_PKTINFO is ignored by __ip6_datagram_connect(), so that RFC 3542 section 6.7 can be subverted when the user space application calls connect() before sendmsg(). Fix it by initializing properly flowi6_oif in connect() before performing the route lookup. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
-
Paolo Abeni authored
[ Upstream commit 6f21c96a ] The current implementation of ip6_dst_lookup_tail basically ignore the egress ifindex match: if the saddr is set, ip6_route_output() purposefully ignores flowi6_oif, due to the commit d46a9d67 ("net: ipv6: Dont add RT6_LOOKUP_F_IFACE flag if saddr set"), if the saddr is 'any' the first route lookup in ip6_dst_lookup_tail fails, but upon failure a second lookup will be performed with saddr set, thus ignoring the ifindex constraint. This commit adds an output route lookup function variant, which allows the caller to specify lookup flags, and modify ip6_dst_lookup_tail() to enforce the ifindex match on the second lookup via said helper. ip6_route_output() becames now a static inline function build on top of ip6_route_output_flags(); as a side effect, out-of-tree modules need now a GPL license to access the output route lookup functionality. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit ff5d7497 ] With some combinations of user provided flags in netlink command, it is possible to call tcp_get_info() with a buffer that is not 8-bytes aligned. It does matter on some arches, so we need to use put_unaligned() to store the u64 fields. Current iproute2 package does not trigger this particular issue. Fixes: 0df48c26 ("tcp: add tcpi_bytes_acked to tcp_info") Fixes: 977cb0ec ("tcp: add pacing_rate information into tcp_info") Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 4f2c6ae5 ] When switchdev drivers process FDB notifications from the underlying device they resolve the netdev to which the entry points to and notify the bridge using the switchdev notifier. However, since the RTNL mutex is not held there is nothing preventing the netdev from disappearing in the middle, which will cause br_switchdev_event() to dereference a non-existing netdev. Make switchdev drivers hold the lock at the beginning of the notification processing session and release it once it ends, after notifying the bridge. Also, remove switchdev_mutex and fdb_lock, as they are no longer needed when RTNL mutex is held. Fixes: 03bf0c28 ("switchdev: introduce switchdev notifier") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Parthasarathy Bhuvaragan authored
[ Upstream commit 4d5cfcba ] In 'commit 7fe8097c ("tipc: fix nullpointer bug when subscribing to events")', we terminate the connection if the subscription creation fails. In the same commit, the subscription creation result was based on the value of the subscription pointer (set in the function) instead of the return code. Unfortunately, the same function tipc_subscrp_create() handles subscription cancel request. For a subscription cancellation request, the subscription pointer cannot be set. Thus if a subscriber has several subscriptions and cancels any of them, the connection is terminated. In this commit, we terminate the connection based on the return value of tipc_subscrp_create(). Fixes: commit 7fe8097c ("tipc: fix nullpointer bug when subscribing to events") Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit 27f7ed2b ] This patch extends commit b93d6471 ("sctp: implement the sender side for SACK-IMMEDIATELY extension") as it didn't white list SCTP_SACK_IMMEDIATELY on sctp_msghdr_parse(), causing it to be understood as an invalid flag and returning -EINVAL to the application. Note that the actual handling of the flag is already there in sctp_datamsg_from_user(). https://tools.ietf.org/html/rfc7053#section-7 Fixes: b93d6471 ("sctp: implement the sender side for SACK-IMMEDIATELY extension") Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 9a368aff ] Several times already this has been reported as kasan reports caused by syzkaller and trinity and people always looked at RCU races, but it is much more simple. :) In case we bind a pptp socket multiple times, we simply add it to the callid_sock list but don't remove the old binding. Thus the old socket stays in the bucket with unused call_id indexes and doesn't get cleaned up. This causes various forms of kasan reports which were hard to pinpoint. Simply don't allow multiple binds and correct error handling in pptp_bind. Also keep sk_state bits in place in pptp_connect. Fixes: 00959ade ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)") Cc: Dmitry Kozlov <xeb@mail.ru> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Reported-by:
-
Eric Dumazet authored
[ Upstream commit fa0dc04d ] Dmitry reported a struct pid leak detected by a syzkaller program. Bug happens in unix_stream_recvmsg() when we break the loop when a signal is pending, without properly releasing scm. Fixes: b3ca9b02 ("net: fix multithreaded signal handling in unix recv routines") Reported-by:
-
Eric Dumazet authored
[ Upstream commit e62a123b ] Neal reported crashes with this stack trace : RIP: 0010:[<ffffffff8c57231b>] tcp_v4_send_ack+0x41/0x20f ... CR2: 0000000000000018 CR3: 000000044005c000 CR4: 00000000001427e0 ... [<ffffffff8c57258e>] tcp_v4_reqsk_send_ack+0xa5/0xb4 [<ffffffff8c1a7caa>] tcp_check_req+0x2ea/0x3e0 [<ffffffff8c19e420>] tcp_rcv_state_process+0x850/0x2500 [<ffffffff8c1a6d21>] tcp_v4_do_rcv+0x141/0x330 [<ffffffff8c56cdb2>] sk_backlog_rcv+0x21/0x30 [<ffffffff8c098bbd>] tcp_recvmsg+0x75d/0xf90 [<ffffffff8c0a8700>] inet_recvmsg+0x80/0xa0 [<ffffffff8c17623e>] sock_aio_read+0xee/0x110 [<ffffffff8c066fcf>] do_sync_read+0x6f/0xa0 [<ffffffff8c0673a1>] SyS_read+0x1e1/0x290 [<ffffffff8c5ca262>] system_call_fastpath+0x16/0x1b The problem here is the skb we provide to tcp_v4_send_ack() had to be parked in the backlog of a new TCP fastopen child because this child was owned by the user at the time an out of window packet arrived. Before queuing a packet, TCP has to set skb->dev to NULL as the device could disappear before packet is removed from the queue. Fix this issue by using the net pointer provided by the socket (being a timewait or a request socket). IPv6 is immune to the bug : tcp_v6_send_response() already gets the net pointer from the socket if provided. Fixes: 168a8f58 ("tcp: TCP Fast Open Server - main code path") Reported-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Manfred Rudigier authored
[ Upstream commit 81e8f2e9 ] PHY status frames are not reliable, the PHY may not be able to send them during heavy receive traffic. This overflow condition is signaled by the PHY in the next status frame, but the driver did not make use of it. Instead it always reported wrong tx timestamps to user space after an overflow happened because it assigned newly received tx timestamps to old packets in the queue. This commit fixes this issue by clearing the tx timestamp queue every time an overflow happens, so that no timestamps are delivered for overflow packets. This way time stamping will continue correctly after an overflow. Signed-off-by:
Manfred Rudigier <manfred.rudigier@omicron.at> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Ursula Braun authored
[ Upstream commit 52a82e23 ] Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Reported-by:
Evgeny Cherkashin <Eugene.Crosser@ru.ibm.com> Signed-off-by:
-
Gavin Shan authored
eeh.h could be included when we have following condition. Then we run into build error as below: (CONFIG_PPC64 && !CONFIG_EEH) || (!CONFIG_PPC64 && !CONFIG_EEH) In file included from arch/powerpc/kernel/of_platform.c:30:0: ./arch/powerpc/include/asm/eeh.h:344:48: error: ‘struct pci_dn’ \ declared inside parameter list [-Werror] : In file included from arch/powerpc/mm/hash_utils_64.c:49:0: ./arch/powerpc/include/asm/eeh.h:344:48: error: ‘struct pci_dn’ \ declared inside parameter list [-Werror] This fixes the issue by replacing those empty inline functions with macro so that we don't rely on @pci_dn when CONFIG_EEH is disabled. Cc: stable@vger.kernel.org # v4.1+ Fixes: ff57b454 ("powerpc/eeh: Do probe on pci_dn") Reported-by:Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
