Skip to content

L
linux
Switch branch/tag
  1. 01 Jun, 2016 11 commits
    • Matt Gumbel's avatar
      mmc: longer timeout for long read time quirk · 33326c06
      Matt Gumbel authored 
      commit 32ecd320 upstream.

008GE0 Toshiba mmc in some Intel Baytrail tablets responds to
MMC_SEND_EXT_CSD in 450-600ms.

This patch will...

() Increase the long read time quirk timeout from 300ms to 600ms. Original
   author of that quirk says 300ms was only a guess and that the number
   may need to be raised in the future.

() Add this specific MMC to the quirk
Signed-off-by: default avatarMatt Gumbel <matthew.k.gumbel@intel.com>
Signed-off-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      33326c06
    • Lv Zheng's avatar
      ACPI / osi: Fix an issue that acpi_osi=!* cannot disable ACPICA internal strings · 72308a8e
      Lv Zheng authored 
      commit 30c9bb0d upstream.

The order of the _OSI related functionalities is as follows:

  acpi_blacklisted()
    acpi_dmi_osi_linux()
      acpi_osi_setup()
    acpi_osi_setup()
      acpi_update_interfaces() if "!*"
      <<<<<<<<<<<<<<<<<<<<<<<<
  parse_args()
    __setup("acpi_osi=")
      acpi_osi_setup_linux()
        acpi_update_interfaces() if "!*"
        <<<<<<<<<<<<<<<<<<<<<<<<
  acpi_early_init()
    acpi_initialize_subsystem()
      acpi_ut_initialize_interfaces()
      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  acpi_bus_init()
    acpi_os_initialize1()
      acpi_install_interface_handler(acpi_osi_handler)
      acpi_osi_setup_late()
        acpi_update_interfaces() for "!"
        >>>>>>>>>>>>>>>>>>>>>>>>
  acpi_osi_handler()

Since acpi_osi_setup_linux() can override acpi_dmi_osi_linux(), the command
line setting can override the DMI detection. That's why acpi_blacklisted()
is put before __setup("acpi_osi=").

Then we can notice the following wrong invocation order. There are
acpi_update_interfaces() (marked by <<<<) calls invoked before
acpi_ut_initialize_interfaces() (marked by ^^^^). This makes it impossible
to use acpi_osi=!* correctly from OSI DMI table or from the command line.
The use of acpi_osi=!* is meant to disable both ACPICA
(acpi_gbl_supported_interfaces) and Linux specific strings
(osi_setup_entries) while the ACPICA part should have stopped working
because of the order issue.

This patch fixes this issue by moving acpi_update_interfaces() to where
it is invoked for acpi_osi=! (marked by >>>>) as this is ensured to be
invoked after acpi_ut_initialize_interfaces() (marked by ^^^^). Linux
specific strings are still handled in the original place in order to make
the following command line working: acpi_osi=!* acpi_osi="Module Device".

Note that since acpi_osi=!* is meant to further disable linux specific
string comparing to the acpi_osi=!, there is no such use case in our bug
fixing work and hence there is no one using acpi_osi=!* either from the
command line or from the DMI quirks, this issue is just a theoretical
issue.

Fixes: 741d8128 (ACPI: Add facility to remove all _OSI strings)
Tested-by: default avatarLukas Wunner <lukas@wunner.de>
Tested-by: default avatarChen Yu <yu.c.chen@intel.com>
Signed-off-by: default avatarLv Zheng <lv.zheng@intel.com>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      72308a8e
    • Adrian Hunter's avatar
      mmc: mmc: Fix partition switch timeout for some eMMCs · 7d10867d
      Adrian Hunter authored 
      commit 1c447116 upstream.

Some eMMCs set the partition switch timeout too low.

Now typically eMMCs are considered a critical component (e.g. because
they store the root file system) and consequently are expected to be
reliable.  Thus we can neglect the use case where eMMCs can't switch
reliably and we might want a lower timeout to facilitate speedy
recovery.

Although we could employ a quirk for the cards that are affected (if
we could identify them all), as described above, there is little
benefit to having a low timeout, so instead simply set a minimum
timeout.

The minimum is set to 300ms somewhat arbitrarily - the examples that
have been seen had a timeout of 10ms but were sometimes taking 60-70ms.
Signed-off-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7d10867d
    • Roger Quadros's avatar
      mfd: omap-usb-tll: Fix scheduling while atomic BUG · a4b1b008
      Roger Quadros authored 
      commit b49b927f upstream.

We shouldn't be calling clk_prepare_enable()/clk_prepare_disable()
in an atomic context.

Fixes the following issue:

[    5.830970] ehci-omap: OMAP-EHCI Host Controller driver
[    5.830974] driver_register 'ehci-omap'
[    5.895849] driver_register 'wl1271_sdio'
[    5.896870] BUG: scheduling while atomic: udevd/994/0x00000002
[    5.896876] 4 locks held by udevd/994:
[    5.896904]  #0:  (&dev->mutex){......}, at: [<c049597c>] __driver_attach+0x60/0xac
[    5.896923]  #1:  (&dev->mutex){......}, at: [<c049598c>] __driver_attach+0x70/0xac
[    5.896946]  #2:  (tll_lock){+.+...}, at: [<c04c2630>] omap_tll_enable+0x2c/0xd0
[    5.896966]  #3:  (prepare_lock){+.+...}, at: [<c05ce9c8>] clk_prepare_lock+0x48/0xe0
[    5.897042] Modules linked in: wlcore_sdio(+) ehci_omap(+) dwc3_omap snd_soc_ts3a225e leds_is31fl319x bq27xxx_battery_i2c tsc2007 bq27xxx_battery bq2429x_charger ina2xx tca8418_keypad as5013 leds_tca6507 twl6040_vibra gpio_twl6040 bmp085_i2c(+) palmas_gpadc usb3503 palmas_pwrbutton bmg160_i2c(+) bmp085 bma150(+) bmg160_core bmp280 input_polldev snd_soc_omap_mcbsp snd_soc_omap_mcpdm snd_soc_omap snd_pcm_dmaengine
[    5.897048] Preemption disabled at:[<  (null)>]   (null)
[    5.897051]
[    5.897059] CPU: 0 PID: 994 Comm: udevd Not tainted 4.6.0-rc5-letux+ #233
[    5.897062] Hardware name: Generic OMAP5 (Flattened Device Tree)
[    5.897076] [<c010e714>] (unwind_backtrace) from [<c010af34>] (show_stack+0x10/0x14)
[    5.897087] [<c010af34>] (show_stack) from [<c040aa7c>] (dump_stack+0x88/0xc0)
[    5.897099] [<c040aa7c>] (dump_stack) from [<c020c558>] (__schedule_bug+0xac/0xd0)
[    5.897111] [<c020c558>] (__schedule_bug) from [<c06f3d44>] (__schedule+0x88/0x7e4)
[    5.897120] [<c06f3d44>] (__schedule) from [<c06f46d8>] (schedule+0x9c/0xc0)
[    5.897129] [<c06f46d8>] (schedule) from [<c06f4904>] (schedule_preempt_disabled+0x14/0x20)
[    5.897140] [<c06f4904>] (schedule_preempt_disabled) from [<c06f64e4>] (mutex_lock_nested+0x258/0x43c)
[    5.897150] [<c06f64e4>] (mutex_lock_nested) from [<c05ce9c8>] (clk_prepare_lock+0x48/0xe0)
[    5.897160] [<c05ce9c8>] (clk_prepare_lock) from [<c05d0e7c>] (clk_prepare+0x10/0x28)
[    5.897169] [<c05d0e7c>] (clk_prepare) from [<c04c2668>] (omap_tll_enable+0x64/0xd0)
[    5.897180] [<c04c2668>] (omap_tll_enable) from [<c04c1728>] (usbhs_runtime_resume+0x18/0x17c)
[    5.897192] [<c04c1728>] (usbhs_runtime_resume) from [<c049d404>] (pm_generic_runtime_resume+0x2c/0x40)
[    5.897202] [<c049d404>] (pm_generic_runtime_resume) from [<c049f180>] (__rpm_callback+0x38/0x68)
[    5.897210] [<c049f180>] (__rpm_callback) from [<c049f220>] (rpm_callback+0x70/0x88)
[    5.897218] [<c049f220>] (rpm_callback) from [<c04a0a00>] (rpm_resume+0x4ec/0x7ec)
[    5.897227] [<c04a0a00>] (rpm_resume) from [<c04a0f48>] (__pm_runtime_resume+0x4c/0x64)
[    5.897236] [<c04a0f48>] (__pm_runtime_resume) from [<c04958dc>] (driver_probe_device+0x30/0x70)
[    5.897246] [<c04958dc>] (driver_probe_device) from [<c04959a4>] (__driver_attach+0x88/0xac)
[    5.897256] [<c04959a4>] (__driver_attach) from [<c04940f8>] (bus_for_each_dev+0x50/0x84)
[    5.897267] [<c04940f8>] (bus_for_each_dev) from [<c0494e40>] (bus_add_driver+0xcc/0x1e4)
[    5.897276] [<c0494e40>] (bus_add_driver) from [<c0496914>] (driver_register+0xac/0xf4)
[    5.897286] [<c0496914>] (driver_register) from [<c01018e0>] (do_one_initcall+0x100/0x1b8)
[    5.897296] [<c01018e0>] (do_one_initcall) from [<c01c7a54>] (do_init_module+0x58/0x1c0)
[    5.897304] [<c01c7a54>] (do_init_module) from [<c01c8a3c>] (SyS_finit_module+0x88/0x90)
[    5.897313] [<c01c8a3c>] (SyS_finit_module) from [<c0107120>] (ret_fast_syscall+0x0/0x1c)
[    5.912697] ------------[ cut here ]------------
[    5.912711] WARNING: CPU: 0 PID: 994 at kernel/sched/core.c:2996 _raw_spin_unlock+0x28/0x58
[    5.912717] DEBUG_LOCKS_WARN_ON(val > preempt_count())
Reported-by: default avatarH. Nikolaus Schaller <hns@goldelico.com>
Tested-by: default avatarH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: default avatarRoger Quadros <rogerq@ti.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a4b1b008
    • Catalin Vasile's avatar
      crypto: caam - fix caam_jr_alloc() ret code · 9efe50f0
      Catalin Vasile authored 
      commit e930c765 upstream.

caam_jr_alloc() used to return NULL if a JR device could not be
allocated for a session. In turn, every user of this function used
IS_ERR() function to verify if anything went wrong, which does NOT look
for NULL values. This made the kernel crash if the sanity check failed,
because the driver continued to think it had allocated a valid JR dev
instance to the session and at some point it tries to do a caam_jr_free()
on a NULL JR dev pointer.
This patch is a fix for this issue.
Signed-off-by: default avatarCatalin Vasile <cata.vasile@nxp.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9efe50f0
    • Steven Rostedt (Red Hat)'s avatar
      ring-buffer: Prevent overflow of size in ring_buffer_resize() · 50b139ab
      Steven Rostedt (Red Hat) authored 
      commit 59643d15 upstream.

If the size passed to ring_buffer_resize() is greater than MAX_LONG - BUF_PAGE_SIZE
then the DIV_ROUND_UP() will return zero.

Here's the details:

  # echo 18014398509481980 > /sys/kernel/debug/tracing/buffer_size_kb

tracing_entries_write() processes this and converts kb to bytes.

 18014398509481980 << 10 = 18446744073709547520

and this is passed to ring_buffer_resize() as unsigned long size.

 size = DIV_ROUND_UP(size, BUF_PAGE_SIZE);

Where DIV_ROUND_UP(a, b) is (a + b - 1)/b

BUF_PAGE_SIZE is 4080 and here

 18446744073709547520 + 4080 - 1 = 18446744073709551599

where 18446744073709551599 is still smaller than 2^64

 2^64 - 18446744073709551599 = 17

But now 18446744073709551599 / 4080 = 4521260802379792

and size = size * 4080 = 18446744073709551360

This is checked to make sure its still greater than 2 * 4080,
which it is.

Then we convert to the number of buffer pages needed.

 nr_page = DIV_ROUND_UP(size, BUF_PAGE_SIZE)

but this time size is 18446744073709551360 and

 2^64 - (18446744073709551360 + 4080 - 1) = -3823

Thus it overflows and the resulting number is less than 4080, which makes

  3823 / 4080 = 0

an nr_pages is set to this. As we already checked against the minimum that
nr_pages may be, this causes the logic to fail as well, and we crash the
kernel.

There's no reason to have the two DIV_ROUND_UP() (that's just result of
historical code changes), clean up the code and fix this bug.

Fixes: 83f40318 ("ring-buffer: Make removal of ring buffer pages atomic")
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      50b139ab
    • Steven Rostedt (Red Hat)'s avatar
      ring-buffer: Use long for nr_pages to avoid overflow failures · b70d79cb
      Steven Rostedt (Red Hat) authored 
      commit 9b94a8fb upstream.

The size variable to change the ring buffer in ftrace is a long. The
nr_pages used to update the ring buffer based on the size is int. On 64 bit
machines this can cause an overflow problem.

For example, the following will cause the ring buffer to crash:

 # cd /sys/kernel/debug/tracing
 # echo 10 > buffer_size_kb
 # echo 8556384240 > buffer_size_kb

Then you get the warning of:

 WARNING: CPU: 1 PID: 318 at kernel/trace/ring_buffer.c:1527 rb_update_pages+0x22f/0x260

Which is:

  RB_WARN_ON(cpu_buffer, nr_removed);

Note each ring buffer page holds 4080 bytes.

This is because:

 1) 10 causes the ring buffer to have 3 pages.
    (10kb requires 3 * 4080 pages to hold)

 2) (2^31 / 2^10  + 1) * 4080 = 8556384240
    The value written into buffer_size_kb is shifted by 10 and then passed
    to ring_buffer_resize(). 8556384240 * 2^10 = 8761737461760

 3) The size passed to ring_buffer_resize() is then divided by BUF_PAGE_SIZE
    which is 4080. 8761737461760 / 4080 = 2147484672

 4) nr_pages is subtracted from the current nr_pages (3) and we get:
    2147484669. This value is saved in a signed integer nr_pages_to_update

 5) 2147484669 is greater than 2^31 but smaller than 2^32, a signed int
    turns into the value of -2147482627

 6) As the value is a negative number, in update_pages_handler() it is
    negated and passed to rb_remove_pages() and 2147482627 pages will
    be removed, which is much larger than 3 and it causes the warning
    because not all the pages asked to be removed were removed.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=118001

Fixes: 7a8e76a3 ("tracing: unified trace buffer")
Reported-by: default avatarHao Qin <QEver.cn@gmail.com>
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b70d79cb
    • Stefan Metzmacher's avatar
      fs/cifs: correctly to anonymous authentication via NTLMSSP · bc6d4853
      Stefan Metzmacher authored 
      commit cfda35d9 upstream.

See [MS-NLMP] 3.2.5.1.2 Server Receives an AUTHENTICATE_MESSAGE from the Client:

   ...
   Set NullSession to FALSE
   If (AUTHENTICATE_MESSAGE.UserNameLen == 0 AND
      AUTHENTICATE_MESSAGE.NtChallengeResponse.Length == 0 AND
      (AUTHENTICATE_MESSAGE.LmChallengeResponse == Z(1)
       OR
       AUTHENTICATE_MESSAGE.LmChallengeResponse.Length == 0))
       -- Special case: client requested anonymous authentication
       Set NullSession to TRUE
   ...

Only server which map unknown users to guest will allow
access using a non-null NTChallengeResponse.

For Samba it's the "map to guest = bad user" option.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=11913Signed-off-by: default avatarStefan Metzmacher <metze@samba.org>
Signed-off-by: default avatarSteve French <smfrench@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bc6d4853
    • Steve French's avatar
      remove directory incorrectly tries to set delete on close on non-empty directories · 63a6fcae
      Steve French authored 
      commit 897fba11 upstream.

Wrong return code was being returned on SMB3 rmdir of
non-empty directory.

For SMB3 (unlike for cifs), we attempt to delete a directory by
set of delete on close flag on the open. Windows clients set
this flag via a set info (SET_FILE_DISPOSITION to set this flag)
which properly checks if the directory is empty.

With this patch on smb3 mounts we correctly return
 "DIRECTORY NOT EMPTY"
on attempts to remove a non-empty directory.
Signed-off-by: default avatarSteve French <steve.french@primarydata.com>
Acked-by: default avatarSachin Prabhu <sprabhu@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      63a6fcae
    • Marc Zyngier's avatar
      arm/arm64: KVM: Enforce Break-Before-Make on Stage-2 page tables · f84d1899
      Marc Zyngier authored 
      commit d4b9e079 upstream.

The ARM architecture mandates that when changing a page table entry
from a valid entry to another valid entry, an invalid entry is first
written, TLB invalidated, and only then the new entry being written.

The current code doesn't respect this, directly writing the new
entry and only then invalidating TLBs. Let's fix it up.
Reported-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f84d1899
    • Josef Bacik's avatar
      Btrfs: don't use src fd for printk · 75d8e34e
      Josef Bacik authored 
      commit c79b4713 upstream.

The fd we pass in may not be on a btrfs file system, so don't try to do
BTRFS_I() on it.  Thanks,
Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      75d8e34e
  3. 19 May, 2016 17 commits
  5. 11 May, 2016 12 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7