- 08 Dec, 2020 11 commits
-
-
Josef Bacik authored
When we move to being able to handle NULL csum_roots it'll be cleaner to just check in btrfs_lookup_bio_sums instead of at all of the caller locations, so push the NODATASUM check into it as well so it's unified. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Josef Bacik authored
We're going to be adding more options that require RDONLY, so add a helper to do the check and error out if we don't have RDONLY set. Reviewed-by:
-
Filipe Manana authored
When scrubbing a stripe of a block group we always start readahead for the checksums btree and wait for it to complete, however when the blockgroup is not a data block group (or a mixed block group) it is a waste of time to do it, since there are no checksums for metadata extents in that btree. So skip that when the block group does not have the data flag set, saving some time doing memory allocations, queueing a job in the readahead work queue, waiting for it to complete and potentially avoiding some IO as well (when csum tree extents are not in memory already). Reviewed-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
-
Filipe Manana authored
When we drop the last reference of a zone, we end up releasing it through the callback reada_zone_release(), which deletes the zone from a device's reada_zones radix tree. This tree is protected by the global readahead lock at fs_info->reada_lock. Currently all places that are sure that they are dropping the last reference on a zone, are calling kref_put() in a critical section delimited by this lock, while all other places that are sure they are not dropping the last reference, do not bother calling kref_put() while holding that lock. When working on the previous fix for hangs and use-after-frees in the readahead code, my initial attempts were different and I actually ended up having reada_zone_release() called when not holding the lock, which resulted in weird and unexpected problems. So just add an assertion there to detect such problem more quickly and make the dependency more obvious. Reviewed-by:
-
Goldwyn Rodrigues authored
Set the extent bits EXTENT_NORESERVE inside btrfs_dirty_pages() as opposed to calling set_extent_bits again later. Fold check for written length within the function. Note: EXTENT_NORESERVE is set before unlocking extents. Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by:
-
Goldwyn Rodrigues authored
round_down looks prettier than the bit mask operations. Reviewed-by:
-
Goldwyn Rodrigues authored
While using compression, a submitted bio is mapped with a compressed bio which performs the read from disk, decompresses and returns uncompressed data to original bio. The original bio must reflect the uncompressed size (iosize) of the I/O to be performed, or else the page just gets the decompressed I/O length of data (disk_io_size). The compressed bio checks the extent map and gets the correct length while performing the I/O from disk. This came up in subpage work when only compressed length of the original bio was filled in the page. This worked correctly for pagesize == sectorsize because both compressed and uncompressed data are at pagesize boundaries, and would end up filling the requested page. Reviewed-by:
-
Goldwyn Rodrigues authored
write_bytes can change in btrfs_check_nocow_lock(). Calculate variables such as num_pages and reserve_bytes once we are sure of the value of write_bytes so there is no need to re-calculate. Reviewed-by:
-
Nikolay Borisov authored
If transaction_kthread is woken up before btrfs_fs_info::commit_interval seconds have elapsed it will sleep for a fixed period of 5 seconds. This is not a problem per-se but is not accurate. Instead the code should sleep for an interval which guarantees on next wakeup commit_interval would have passed. Since time tracking is not precise subtract 1 second from delta to ensure the delay we end up waiting will be longer than than the wake up period. Signed-off-by:
-
Nikolay Borisov authored
Rename 'now' to 'delta' and store there the delta between transaction start time and current time. This is in preparation for optimising the sleep logic in the next patch. No functional changes. Signed-off-by:
-
Nikolay Borisov authored
The value obtained from ktime_get_seconds() is guaranteed to be monotonically increasing since it's taken from CLOCK_MONOTONIC. As transaction_kthread obtains a reference to the currently running transaction under holding btrfs_fs_info::trans_lock it's guaranteed to: a) see an initialized 'cur', whose start_time is guaranteed to be smaller than 'now' or b) not obtain a 'cur' and simply go to sleep. Given this remove the unnecessary check, if it sees now < cur->start_time this would imply there are far greater problems on the machine. Signed-off-by:
-
- 07 Dec, 2020 2 commits
-
-
Nikolay Borisov authored
The kernel provides easy to understand helpers to convert from human understandable units to the kernel-friendly 'jiffies'. So let's use those to make the code easier to understand. No functional changes. Signed-off-by:
-
Anand Jain authored
Matching with the information that's available from the ioctl FS_INFO, add generation to the per-filesystem directory /sys/fs/btrfs/UUID/generation, which could be used by scripts. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
- 06 Dec, 2020 27 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small driver fixes, and one "large" revert, for 5.10-rc7. They include: - revert mei patch from 5.10-rc1 that was using a reserved userspace value. It will be resubmitted once the proper id has been assigned by the virtio people. - habanalabs fixes found by the fall-through audit from Gustavo - speakup driver fixes for reported issues - fpga config build fix for reported issue. All of these except the revert have been in linux-next with no reported issues. The revert is "clean" and just removes a previously-added driver, so no real issue there" * tag 'char-misc-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "mei: virtio: virtualization frontend driver" fpga: Specify HAS_IOMEM dependency for FPGA_DFL habanalabs: put devices before driver removal habanalabs: free host huge va_range if not used speakup: Reject setting the speakup line discipline outside of speakup -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty fixes from Greg KH: "Here are two tty core fixes for 5.10-rc7. They resolve some reported locking issues in the tty core. While they have not been in a released linux-next yet, they have passed all of the 0-day bot testing as well as the submitter's testing" * tag 'tty-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix ->session locking tty: Fix ->pgrp locking in tiocspgrp()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.10-rc7 that resolve a number of reported issues, and add some new device ids. Nothing major here, but these solve some problems that people were having with the 5.10-rc tree: - reverts for USB storage dma settings that broke working devices - thunderbolt use-after-free fix - cdns3 driver fixes - gadget driver userspace copy fix - new device ids All of these except for the reverts have been in linux-next with no reported issues. The reverts are "clean" and were tested by Hans, as well as passing the 0-day tests" * tag 'usb-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: f_fs: Use local copy of descriptors for userspace copy usb: ohci-omap: Fix descriptor conversion Revert "usb-storage: fix sdev->host->dma_dev" Revert "uas: fix sdev->host->dma_dev" Revert "uas: bump hw_max_sectors to 2048 blocks for SS or faster drives" USB: serial: kl5kusb105: fix memleak on open USB: serial: ch341: sort device-id entries USB: serial: ch341: add new Product ID for CH341A USB: serial: option: fix Quectel BG96 matching usb: cdns3: core: fix goto label for error path usb: cdns3: gadget: clear trb->length as zero after preparing every trb usb: cdns3: Fix hardware based role switch USB: serial: option: add support for Thales Cinterion EXS82 USB: serial: option: add Fibocom NL668 variants thunderbolt: Fix use-after-free in remove_unplugged_switch()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Make the AMD L3 QoS code and data priorization enable/disable mechanism work correctly. The control bit was only set/cleared on one of the CPUs in a L3 domain, but it has to be modified on all CPUs in the domain. The initial documentation was not clear about this, but the updated one from Oct 2020 spells it out. - Fix an off by one in the UV platform detection code which causes the UV hubs to be identified wrongly. The chip revisions start at 1 not at 0. - Fix a long standing bug in the evaluation of prefixes in the uprobes code which fails to handle repeated prefixes properly. The aggregate size of the prefixes can be larger than the bytes array but the code blindly iterated over the aggregate size beyond the array boundary. Add a macro to handle this case properly and use it at the affected places" * tag 'x86-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev-es: Use new for_each_insn_prefix() macro to loop over prefixes bytes x86/insn-eval: Use new for_each_insn_prefix() macro to loop over prefixes bytes x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes x86/platform/uv: Fix UV4 hub revision adjustment x86/resctrl: Fix AMD L3 QOS CDP enable/disable -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Two fixes for performance monitoring on X86: - Add recursion protection to another callchain invoked from x86_pmu_stop() which can recurse back into x86_pmu_stop(). The first attempt to fix this missed this extra code path. - Use the already filtered status variable to check for PEBS counter overflow bits and not the unfiltered full status read from IA32_PERF_GLOBAL_STATUS which can have unrelated bits check which would be evaluated incorrectly" * tag 'perf-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Check PEBS status correctly perf/x86/intel: Fix a warning on x86_pmu_stop() with large PEBS -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A set of updates for the interrupt subsystem: - Make multiqueue devices which use the managed interrupt affinity infrastructure work on PowerPC/Pseries. PowerPC does not use the generic infrastructure for setting up PCI/MSI interrupts and the multiqueue changes failed to update the legacy PCI/MSI infrastructure. Make this work by passing the affinity setup information down to the mapping and allocation functions. - Move Jason Cooper from MAINTAINERS to CREDITS as his mail is bouncing and he's not reachable. We hope all is well with him and say thanks for his work over the years" * tag 'irq-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: powerpc/pseries: Pass MSI affinity to irq_create_mapping() genirq/irqdomain: Add an irq_create_mapping_affinity() function MAINTAINERS: Move Jason Cooper to CREDITS -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull intel_idle build fix from Thomas Gleixner: "A tiny build fix for a recent change in the intel_idle driver which missed a CONFIG dependency and broke the build for certain configurations" * tag 'locking-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: intel_idle: Build fix
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Move -Wcast-align to W=3, which tends to be false-positive and there is no tree-wide solution. - Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a preprocessor option and makes sense for .S files as well. - Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings. - Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings. - Fix undesirable line breaks in *.mod files. * tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: avoid split lines in .mod files kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1 kbuild: Hoist '--orphan-handling' into Kconfig Kbuild: do not emit debug info for assembly with LLVM_IAS=1 kbuild: use -fmacro-prefix-map for .S sources Makefile.extrawarn: move -Wcast-align to W=3
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "12 patches. Subsystems affected by this patch series: mm (memcg, zsmalloc, swap, mailmap, selftests, pagecache, hugetlb, pagemap), lib, and coredump" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/mmap.c: fix mmap return value when vma is merged after call_mmap() hugetlb_cgroup: fix offline of hugetlb cgroup with reservations mm/filemap: add static for function __add_to_page_cache_locked userfaultfd: selftests: fix SIGSEGV if huge mmap fails tools/testing/selftests/vm: fix build error mailmap: add two more addresses of Uwe Kleine-König mm/swapfile: do not sleep with a spin lock held mm/zsmalloc.c: drop ZSMALLOC_PGTABLE_MAPPING mm: list_lru: set shrinker map bit when child nr_items is not zero mm: memcg/slab: fix obj_cgroup_charge() return value handling coredump: fix core_pattern parse error zlib: export S390 symbols for zlib modules
-
Liu Zixian authored
On success, mmap should return the begin address of newly mapped area, but patch "mm: mmap: merge vma after call_mmap() if possible" set vm_start of newly merged vma to return value addr. Users of mmap will get wrong address if vma is merged after call_mmap(). We fix this by moving the assignment to addr before merging vma. We have a driver which changes vm_flags, and this bug is found by our testcases. Fixes: d70cec89 ("mm: mmap: merge vma after call_mmap() if possible") Signed-off-by:
Liu Zixian <liuzixian4@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Hongxiang Lou <louhongxiang@huawei.com> Cc: Hu Shiyuan <hushiyuan@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Link: https://lkml.kernel.org/r/20201203085350.22624-1-liuzixian4@huawei.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Kravetz authored
Adrian Moreno was ruuning a kubernetes 1.19 + containerd/docker workload using hugetlbfs. In this environment the issue is reproduced by: - Start a simple pod that uses the recently added HugePages medium feature (pod yaml attached) - Start a DPDK app. It doesn't need to run successfully (as in transfer packets) nor interact with real hardware. It seems just initializing the EAL layer (which handles hugepage reservation and locking) is enough to trigger the issue - Delete the Pod (or let it "Complete"). This would result in a kworker thread going into a tight loop (top output): 1425 root 20 0 0 0 0 R 99.7 0.0 5:22.45 kworker/28:7+cgroup_destroy 'perf top -g' reports: - 63.28% 0.01% [kernel] [k] worker_thread - 49.97% worker_thread - 52.64% process_one_work - 62.08% css_killed_work_fn - hugetlb_cgroup_css_offline 41.52% _raw_spin_lock - 2.82% _cond_resched rcu_all_qs 2.66% PageHuge - 0.57% schedule - 0.57% __schedule We are spinning in the do-while loop in hugetlb_cgroup_css_offline. Worse yet, we are holding the master cgroup lock (cgroup_mutex) while infinitely spinning. Little else can be done on the system as the cgroup_mutex can not be acquired. Do note that the issue can be reproduced by simply offlining a hugetlb cgroup containing pages with reservation counts. The loop in hugetlb_cgroup_css_offline is moving page counts from the cgroup being offlined to the parent cgroup. This is done for each hstate, and is repeated until hugetlb_cgroup_have_usage returns false. The routine moving counts (hugetlb_cgroup_move_parent) is only moving 'usage' counts. The routine hugetlb_cgroup_have_usage is checking for both 'usage' and 'reservation' counts. Discussion about what to do with reservation counts when reparenting was discussed here: https://lore.kernel.org/linux-kselftest/CAHS8izMFAYTgxym-Hzb_JmkTK1N_S9tGN71uS6MFV+R7swYu5A@mail.gmail.com/ The decision was made to leave a zombie cgroup for with reservation counts. Unfortunately, the code checking reservation counts was incorrectly added to hugetlb_cgroup_have_usage. To fix the issue, simply remove the check for reservation counts. While fixing this issue, a related bug in hugetlb_cgroup_css_offline was noticed. The hstate index is not reinitialized each time through the do-while loop. Fix this as well. Fixes: 1adc4d41 ("hugetlb_cgroup: add interface for charge/uncharge hugetlb reservations") Reported-by:Adrian Moreno <amorenoz@redhat.com> Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
Shakeel Butt <shakeelb@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201203220242.158165-1-mike.kravetz@oracle.comSigned-off-by:
-
Alex Shi authored
mm/filemap.c:830:14: warning: no previous prototype for `__add_to_page_cache_locked' [-Wmissing-prototypes] Signed-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by:
-
Axel Rasmussen authored
The error handling in hugetlb_allocate_area() was incorrect for the hugetlb_shared test case. Previously the behavior was: - mmap a hugetlb area - If this fails, set the pointer to NULL, and carry on - mmap an alias of the same hugetlb fd - If this fails, munmap the original area If the original mmap failed, it's likely the second one did too. If both failed, we'd blindly try to munmap a NULL pointer, causing a SIGSEGV. Instead, "goto fail" so we return before trying to mmap the alias. This issue can be hit "in real life" by forgetting to set /proc/sys/vm/nr_hugepages (leaving it at 0), and then trying to run the hugetlb_shared test. Another small improvement is, when the original mmap fails, don't just print "it failed": perror(), so we can see *why*. :) Signed-off-by:
Axel Rasmussen <axelrasmussen@google.com> Signed-off-by:
-
Xingxing Su authored
Only x86 and PowerPC implement the pkey-xxx.h, and an error was reported when compiling protection_keys.c. Add a Arch judgment to compile "protection_keys" in the Makefile. If other arch implement this, add the arch name to the Makefile. eg: ifneq (,$(findstring $(ARCH),powerpc mips ... )) Following build errors: pkey-helpers.h:93:2: error: #error Architecture not supported #error Architecture not supported pkey-helpers.h:96:20: error: `PKEY_DISABLE_ACCESS' undeclared #define PKEY_MASK (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE) ^ protection_keys.c:218:45: error: `PKEY_DISABLE_WRITE' undeclared pkey_assert(flags & (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE)); ^ Signed-off-by:Xingxing Su <suxingxing@loongson.cn> Signed-off-by:
-
Uwe Kleine-König authored
This fixes attribution for the commits (among others) - d4097456 ("video/framebuffer: move the probe func into .devinit.text in Blackfin LCD driver") - 0312e024 ("mfd: mc13xxx: Add support for mc34708") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Qian Cai authored
We can't call kvfree() with a spin lock held, so defer it. Fixes a might_sleep() runtime warning. Fixes: 873d7bcf ("mm/swapfile.c: use kvzalloc for swap_info_struct allocation") Signed-off-by:
Qian Cai <qcai@redhat.com> Signed-off-by:
-
Minchan Kim authored
While I was doing zram testing, I found sometimes decompression failed since the compression buffer was corrupted. With investigation, I found below commit calls cond_resched unconditionally so it could make a problem in atomic context if the task is reschedule. BUG: sleeping function called from invalid context at mm/vmalloc.c:108 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 946, name: memhog 3 locks held by memhog/946: #0: ffff9d01d4b193e8 (&mm->mmap_lock#2){++++}-{4:4}, at: __mm_populate+0x103/0x160 #1: ffffffffa3d53de0 (fs_reclaim){+.+.}-{0:0}, at: __alloc_pages_slowpath.constprop.0+0xa98/0x1160 #2: ffff9d01d56b8110 (&zspage->lock){.+.+}-{3:3}, at: zs_map_object+0x8e/0x1f0 CPU: 0 PID: 946 Comm: memhog Not tainted 5.9.3-00011-gc5bfc0287345-dirty #316 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 Call Trace: unmap_kernel_range_noflush+0x2eb/0x350 unmap_kernel_range+0x14/0x30 zs_unmap_object+0xd5/0xe0 zram_bvec_rw.isra.0+0x38c/0x8e0 zram_rw_page+0x90/0x101 bdev_write_page+0x92/0xe0 __swap_writepage+0x94/0x4a0 pageout+0xe3/0x3a0 shrink_page_list+0xb94/0xd60 shrink_inactive_list+0x158/0x460 We can fix this by removing the ZSMALLOC_PGTABLE_MAPPING feature (which contains the offending calling code) from zsmalloc. Even though this option showed some amount improvement(e.g., 30%) in some arm32 platforms, it has been headache to maintain since it have abused APIs[1](e.g., unmap_kernel_range in atomic context). Since we are approaching to deprecate 32bit machines and already made the config option available for only builtin build since v5.8, lastly it has been not default option in zsmalloc, it's time to drop the option for better maintenance. [1] http://lore.kernel.org/linux-mm/20201105170249.387069-1-minchan@kernel.org Fixes: e47110e9 ("mm/vunmap: add cond_resched() in vunmap_pmd_range") Signed-off-by:Minchan Kim <minchan@kernel.org> Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Harish Sriram <harish@linux.ibm.com> Cc: Uladzislau Rezki <urezki@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201117202916.GA3856507@google.comSigned-off-by:
-
Yang Shi authored
When investigating a slab cache bloat problem, significant amount of negative dentry cache was seen, but confusingly they neither got shrunk by reclaimer (the host has very tight memory) nor be shrunk by dropping cache. The vmcore shows there are over 14M negative dentry objects on lru, but tracing result shows they were even not scanned at all. Further investigation shows the memcg's vfs shrinker_map bit is not set. So the reclaimer or dropping cache just skip calling vfs shrinker. So we have to reboot the hosts to get the memory back. I didn't manage to come up with a reproducer in test environment, and the problem can't be reproduced after rebooting. But it seems there is race between shrinker map bit clear and reparenting by code inspection. The hypothesis is elaborated as below. The memcg hierarchy on our production environment looks like: root / \ system user The main workloads are running under user slice's children, and it creates and removes memcg frequently. So reparenting happens very often under user slice, but no task is under user slice directly. So with the frequent reparenting and tight memory pressure, the below hypothetical race condition may happen: CPU A CPU B reparent dst->nr_items == 0 shrinker: total_objects == 0 add src->nr_items to dst set_bit return SHRINK_EMPTY clear_bit child memcg offline replace child's kmemcg_id with parent's (in memcg_offline_kmem()) list_lru_del() between shrinker runs see parent's kmemcg_id dec dst->nr_items reparent again dst->nr_items may go negative due to concurrent list_lru_del() The second run of shrinker: read nr_items without any synchronization, so it may see intermediate negative nr_items then total_objects may return 0 coincidently keep the bit cleared dst->nr_items != 0 skip set_bit add scr->nr_item to dst After this point dst->nr_item may never go zero, so reparenting will not set shrinker_map bit anymore. And since there is no task under user slice directly, so no new object will be added to its lru to set the shrinker map bit either. That bit is kept cleared forever. How does list_lru_del() race with reparenting? It is because reparenting replaces children's kmemcg_id to parent's without protecting from nlru->lock, so list_lru_del() may see parent's kmemcg_id but actually deleting items from child's lru, but dec'ing parent's nr_items, so the parent's nr_items may go negative as commit 2788cf0c ("memcg: reparent list_lrus and free kmemcg_id on css offline") says. Since it is impossible that dst->nr_items goes negative and src->nr_items goes zero at the same time, so it seems we could set the shrinker map bit iff src->nr_items != 0. We could synchronize list_lru_count_one() and reparenting with nlru->lock, but it seems checking src->nr_items in reparenting is the simplest and avoids lock contention. Fixes: fae91d6d ("mm/list_lru.c: set bit in memcg shrinker bitmap on first list_lru item appearance") Suggested-by:Roman Gushchin <guro@fb.com> Signed-off-by:
Yang Shi <shy828301@gmail.com> Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <stable@vger.kernel.org> [4.19] Link: https://lkml.kernel.org/r/20201202171749.264354-1-shy828301@gmail.comSigned-off-by:
-
Roman Gushchin authored
Commit 10befea9 ("mm: memcg/slab: use a single set of kmem_caches for all allocations") introduced a regression into the handling of the obj_cgroup_charge() return value. If a non-zero value is returned (indicating of exceeding one of memory.max limits), the allocation should fail, instead of falling back to non-accounted mode. To make the code more readable, move memcg_slab_pre_alloc_hook() and memcg_slab_post_alloc_hook() calling conditions into bodies of these hooks. Fixes: 10befea9 ("mm: memcg/slab: use a single set of kmem_caches for all allocations") Signed-off-by:
-
Menglong Dong authored
'format_corename()' will splite 'core_pattern' on spaces when it is in pipe mode, and take helper_argv[0] as the path to usermode executable. It works fine in most cases. However, if there is a space between '|' and '/file/path', such as '| /usr/lib/systemd/systemd-coredump %P %u %g', then helper_argv[0] will be parsed as '', and users will get a 'Core dump to | disabled'. It is not friendly to users, as the pattern above was valid previously. Fix this by ignoring the spaces between '|' and '/file/path'. Fixes: 315c6926 ("coredump: split pipe command whitespace before expanding template") Signed-off-by:
Menglong Dong <dong.menglong@zte.com.cn> Signed-off-by:
-
Randy Dunlap authored
Fix build errors when ZLIB_INFLATE=m and ZLIB_DEFLATE=m and ZLIB_DFLTCC=y by exporting the 2 needed symbols in dfltcc_inflate.c. Fixes these build errors: ERROR: modpost: "dfltcc_inflate" [lib/zlib_inflate/zlib_inflate.ko] undefined! ERROR: modpost: "dfltcc_can_inflate" [lib/zlib_inflate/zlib_inflate.ko] undefined! Fixes: 12619610 ("lib/zlib: add s390 hardware support for kernel zlib_inflate") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Link: https://lkml.kernel.org/r/20201123191712.4882-1-rdunlap@infradead.orgSigned-off-by:
-
Masahiro Yamada authored
"xargs echo" is not a safe way to remove line breaks because the input may exceed the command line limit and xargs may break it up into multiple invocations of echo. This should never happen because scripts/gen_autoksyms.sh expects all undefined symbols are placed in the second line of .mod files. One possible way is to replace "xargs echo" with "sed ':x;N;$!bx;s/\n/ /g'" or something, but I rewrote the code by using awk because it is more readable. This issue was reported by Sami Tolvanen; in his Clang LTO patch set, $(multi-used-m) is no longer an ELF object, but a thin archive that contains LLVM bitcode files. llvm-nm prints out symbols for each archive member separately, which results a lot of dupications, in some places, beyond the system-defined limit. This problem must be fixed irrespective of LTO, and we must ensure zero possibility of having this issue. Link: https://lkml.org/lkml/2020/12/1/1658Reported-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
-
Michael S. Tsirkin authored
This reverts commit d162219c. The device uses a VIRTIO device ID out of a not-for-production range. Releasing Linux using an ID out of this range will make it conflict with development setups. An official request to reserve an ID for an MEI device is yet to be submitted to the virtio TC, thus there's no chance it will be reserved and fixed in time before the next release. Once requested it usually takes 2-3 weeks to land in the spec, which means the device can be supported with the official ID in the next Linux version if contributors act quickly. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Alexander Usyskin <alexander.usyskin@intel.com> Cc: Wang Yu <yu1.wang@intel.com> Cc: Liu Shuo <shuo.a.liu@intel.com> Link: https://lore.kernel.org/r/20201205193625.469773-1-mst@redhat.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masami Hiramatsu authored
Since insn.prefixes.nbytes can be bigger than the size of insn.prefixes.bytes[] when a prefix is repeated, the proper check must be: insn.prefixes.bytes[i] != 0 and i < 4 instead of using insn.prefixes.nbytes. Use the new for_each_insn_prefix() macro which does it correctly. Debugged by Kees Cook <keescook@chromium.org>. [ bp: Massage commit message. ] Fixes: 25189d08 ("x86/sev-es: Add support for handling IOIO exceptions") Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/160697106089.3146288.2052422845039649176.stgit@devnote2
-
Masami Hiramatsu authored
Since insn.prefixes.nbytes can be bigger than the size of insn.prefixes.bytes[] when a prefix is repeated, the proper check must be insn.prefixes.bytes[i] != 0 and i < 4 instead of using insn.prefixes.nbytes. Use the new for_each_insn_prefix() macro which does it correctly. Debugged by Kees Cook <keescook@chromium.org>. [ bp: Massage commit message. ] Fixes: 32d0b953 ("x86/insn-eval: Add utility functions to get segment selector") Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com Signed-off-by:
-
Masami Hiramatsu authored
Since insn.prefixes.nbytes can be bigger than the size of insn.prefixes.bytes[] when a prefix is repeated, the proper check must be insn.prefixes.bytes[i] != 0 and i < 4 instead of using insn.prefixes.nbytes. Introduce a for_each_insn_prefix() macro for this purpose. Debugged by Kees Cook <keescook@chromium.org>. [ bp: Massage commit message, sync with the respective header in tools/ and drop "we". ] Fixes: 2b144498 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints") Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/160697103739.3146288.7437620795200799020.stgit@devnote2
-
