- 09 Apr, 2010 7 commits
-
-
Zhenyu Wang authored
This one replaces original param for intel_ddc_get_modes() with DRM connector and i2c bus adapter instead. With explicit params, we won't require that a single driver structure must hold connector and DDC bus reference, which ease the conversion to splitted encoder/ connector model. It also clears up for some cases that we would steal other DDC bus for mode probe, like VGA analog DDC probe for DVI-I. Also it fixed a bug in old DVI-I probe handling, that failed to restore origin analog GPIO port. Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Eric Anholt <eric@anholt.net>
-
Zhenyu Wang authored
In load detection, connector's encoder assignment must be kept consistent for proper mode setting, and this makes connector as explicit parameter for load detect function to not require single data structure to hold both encoder and connector reference, ease the transition for splitted encoder/connector model. Signed-off-by:
-
Zhenyu Wang authored
For introducing splitted encoder/connector structure, this helper will return connector's attached encoder when needed. Signed-off-by:
-
Zhenyu Wang authored
This adds new structure of intel_connector to present drm's connector object, which is used to convert from origin single output into encoder/connector model. Signed-off-by:
-
Zhenyu Wang authored
What we really want is encoder info instead of connector, so change some more list walk in pipeline setup functions from connector_list to encoder_list. Signed-off-by:
-
Zhenyu Wang authored
Instead of walking through drm connector_list uses encoder_list for calling hotplug functions which is consistent with intel display hotplug reporting. Signed-off-by:
-
Li Zefan authored
Use DECLARE_EVENT_CLASS to remove duplicate code: text data bss dec hex filename 14655 2732 15 17402 43fa i915_trace_points.o.orig 11625 2732 10 14367 381f i915_trace_points.o 8 events are converted: i915_gem_object: i915_gem_object_{unbind, destroy} i915_gem_request: i915_gem_request_{complete, retire, wait_begin, wait_end} i915_ring: i915_ring_{wait_begin, wait_end} No functional change. Signed-off-by:Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
-
- 10 Apr, 2010 2 commits
-
-
Zhao Yakui authored
The TV detection logic is not reliable on the Cantiga platform. Sometimes the TV will be misdetected as the following two cases: - TV is misdetected on some laptops. e.g. There is no TV connector port or no TV is attached. But the TV is shown as connected. - TV connector type is misdetected. e.g. the component TV is attached, but the TV is shown as S-video type. According to the hardware requirement, the TV sense state bits of TV DAC register should be cleared to zero on Cantiga platfrom. https://bugzilla.kernel.org/show_bug.cgi?id=14792 Cc: Stable Team <stable@kernel.org> Signed-off-by:
Zhao Yakui <yakui.zhao@intel.com> Tested-by:
Santi <santi@agolina.net> Signed-off-by:
-
Zhao Yakui authored
This trys to shut up complains about invalid LVDS EDID during mode probe, but uses fixed panel mode directly for panels with broken EDID. https://bugs.freedesktop.org/show_bug.cgi?id=23099 https://bugs.freedesktop.org/show_bug.cgi?id=26395Signed-off-by:
Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by:
-
- 03 Apr, 2010 1 commit
-
-
Stefan Bader authored
BugLink: http://bugs.launchpad.net/ubuntu/bugs/544671 This system claims to have a LVDS but has not. Signed-off-by:
Stephane Graber <stgraber@ubuntu.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> CC: stable@kernel.org Signed-off-by:
-
- 25 Mar, 2010 5 commits
-
-
Eric Anholt authored
Signed-off-by: -
Eric Anholt authored
The intel_output naming is inherited from the UMS code, which had a structure of screen -> CRTC -> output. The DRM code has an additional notion of encoder/connector, so the structure is screen -> CRTC -> encoder -> connector. This is a useful structure for SDVO encoders which can support multiple connectors (each of which requires different programming in the one encoder and could be connected to different CRTCs), or for DVI-I, where multiple encoders feed into the connector for whether it's used for digital or analog. Most of our code is encoder-related, so transition it to talking about encoders before we start trying to distinguish connectors. This patch is produced by sed s/intel_output/intel_encoder/ over the driver. Signed-off-by: -
Daniel Vetter authored
... not a GTT driver. So the additional chipset flush introduced in commit 2162e6a2 Author: Dave Airlie <airlied@redhat.com> Date: Wed Nov 21 16:36:31 2007 +1000 agp/intel: Add chipset flushing support for i8xx chipsets. to fix a GTT problem makes absolutely no sense. If this would really be needed for AGP chipsets, too, we should add it to all i8xx agp drivers, not just one. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
This is a purely cosmetic change to make changes in this area easier. And hey, it's not only clearer and typechecked, but actually shorter, too! [anholt: To clarify, this is a change to let us later make drm_i915_gem_object subclass drm_gem_object, instead of having drm_gem_object have a pointer to i915's private data] Signed-off-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Robert Hooker authored
It is causing hangs after a suspend/resume cycle with the default powersave=1 module option on these chipsets since 2.6.32-rc. BugLink: http://bugs.launchpad.net/bugs/492392Signed-off-by:
Robert Hooker <sarvatt@ubuntu.com> Acked-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
- 24 Mar, 2010 25 commits
-
-
git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds authored
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: OMAP: DSS2: panel-generic: re-implement mode changing OMAP: DSS2: initialize dss clk sources properly OMAP: DSS2: VRAM: Fix early_param for vram
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Orion5x: replace KEY_WLAN with KEY_WPS_BUTTON [ARM] Kirkwood: WPS button keycode mapping pxa168fb: fix incorrect resource calculation [ARM] pxa/raumfeld: fix button name [ARM] pxa/raumfeld: remove duplicated #include [ARM] locomo: fix unpaired spin_lock_irqsave [ARM] locomo: fix SPI register offset [ARM] pxa/sharpsl: add dependency of max1111 driver to sharpsl_pm [ARM] pxa: remove unnecessary 'select FB_W100' from some platforms [ARM] pxa: remove spi cs gpio direction to avoid clash with driver [ARM] mmp: fix for variables in uncompress.h being discarded [ARM] pxa: fix for variables in uncompress.h being discarded ARM: Update mach-types ARM: Fix IXP23xx build error in mach/memory.h
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds authored
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: don't try to decode GETATTR if DELEGRETURN returned error sunrpc: handle allocation errors from __rpc_lookup_create() SUNRPC: Fix the return value of rpc_run_bc_task() SUNRPC: Fix a use after free bug with the NFSv4.1 backchannel SUNRPC: Fix a potential memory leak in auth_gss NFS: Prevent another deadlock in nfs_release_page()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata-sff: fix spurious IRQ handling pata_via: Add VIA VX900 support
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds authored
* 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Silence unintialized variable warnings in dwarf unwinder. sh: Tidy up a couple of section mismatches. sh: Fix build after dynamic PMB rework sh: Replace unsafe manipulation of MMUCR sh: Flush ITLB too in PTEAEX's flush_tlb_page() sh64: Remove long unused mid_sched macro SH: remove superfluous warning from the serial driver SH: fix SCIFA SCASCR register bit definitions serial: sh-sci: fix SH-Mobile SH breakage sh: Add watch-dog register address for SH7722/SH7723/SH7724 sh: ms7724: Add tiny-document for sound sh: mach-ecovec24: Add i2c_put_adapter on sh_eth_init
-
Dan Carpenter authored
Sparse complained about this missing spin_unlock() Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: fix dangling pointers lp3971: Fix BUCK_VOL_CHANGE_SHIFT logic lp3971: Fix setting val for LDO2 and LDO4 regulator: Get rid of lockdep warning regulator: handle kcalloc() failure Regulators: max8925-regulator - clean up driver data after removal
-
David Howells authored
do_sync_read/write() should set kiocb.ki_nbytes to be consistent with do_sync_readv_writev(). Signed-off-by:
-
David Howells authored
Fix an incorrect for-loop in elf_core_vma_data_size(). The advance-pointer statement lacks an assignment: CC fs/binfmt_elf_fdpic.o fs/binfmt_elf_fdpic.c: In function 'elf_core_vma_data_size': fs/binfmt_elf_fdpic.c:1593: warning: statement with no effect Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intelLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Stop trying to use ACPI lid status to determine LVDS connection. drm/intel: fix up set_tiling for untiled->tiled transition drm/i915: Set up the documented clock gating on Sandybridge and Ironlake. agp/intel: Don't do the chipset flush on Sandybridge. agp/intel: Respect the GTT size on Sandybridge for scratch page setup. drm/i915: fix small leak on overlay error path drm/i915: Avoid NULL deref in get_pages() unwind after error. drm/i915: Fix check with IS_GEN6 drivers/gpu/drm/i915/intel_bios.c: fix continuation line formats drm/i915: Enable VS timer dispatch. drm/i915: Rename FBC_C3_IDLE to FBC_CTL_C3_IDLE to match other registers drm/i915: remove an unnecessary wait_request() drm/i915: Don't bother with the BKL for GEM ioctls.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-scmi: Provide module aliases for automatic loading i2c-scmi: Support IBM SMBus CMI devices acpi: Support IBM SMBus CMI devices
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fix boot failures with compressed kernels [S390] fix broken proc interface for sclp_async [S390] sclp: avoid 64 bit division [S390] dasd: check tsb validity [S390] dasd: fix alignment of transport mode recovery TCW [S390] system.h: Fix compile error for 1 and 2 byte cmpxchg [S390] smp: fix lowcore allocation [S390] zcore: CPU registers are not saved under LPAR
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: cmipci: work around invalid PCM pointer ASoC: Remove BROKEN from i.MX audio after dependencies merged ALSA: hda - Fix access-after-free in patch_realtek.c ALSA: hda - Sort codec entry list of Nvidia HDMI ALSA: hda - Add support of Nvidia GT220 HDMI ALSA: hda: Fix 0 dB offset for HP laptops using CX20551 (Waikiki) ALSA: hda - Add PCI quirk for HP dv6-1110ax. sound/oss/vidc.c: change the field used with DMA_ACTIVE ASoC: pxa-pcm-lib: initialize DMA channel to -1 ASoC: Bail out of wm_hubs DC servo if calibration fails ASoC: tlv320dac33: Internal clocking changes ASoC: tlv320dac33: Fix DSP modes ASoC: SIU driver shall select FW_LOADER
-
David Howells authored
Document the circular buffering capabilities available in Linux. Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by:
Randy Dunlap <rdunlap@xenotime.net> Reviewed-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
OGAWA Hirofumi authored
Smaller size than a minimum blocksize can't be used, after all it's handled like 0 size. For extended partition itself, this makes sure to use bigger size than one logical sector size at least. Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Daniel Taylor <Daniel.Taylor@wdc.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Daniel Taylor authored
In order to use disks larger than 2TiB on Windows XP, it is necessary to use 4096-byte logical sectors in an MBR. Although the kernel storage and functions called from msdos.c used "sector_t" internally, msdos.c still used u32 variables, which results in the ability to handle XP-compatible large disks. This patch changes the internal variables to "sector_t". Daniel said: "In the near future, WD will be releasing products that need this patch". [hirofumi@mail.parknet.co.jp: tweaks and fix] Signed-off-by:
Daniel Taylor <daniel.taylor@wdc.com> Signed-off-by:
-
Michael Grzeschik authored
Fixup for the flatpanel output. The geode_modedb attribute flags are used to set the SYNC polarity of the flatpanel. Without this patch our flatpanel registers stayed unconfigured, so we just saw garbage output. Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by:
-
Dan Carpenter authored
"m" is never NULL here. We need a different test for the end of list condition. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
-
Lee Schermerhorn authored
Discovered while testing other mempolicy changes: get_mempolicy() does not handle static/relative mode flags correctly. Return the value that the user specified so that it can be restored via set_mempolicy() if desired. Signed-off-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Ravikiran Thirumalai <kiran@scalex86.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Adrian Hunter authored
In the extended CSD register the CARD_TYPE is an 8-bit value of which the upper 6 bits were reserved in JEDEC specifications prior to version 4.4. In version 4.4 two of the reserved bits were designated for identifying support for the newly added High-Speed Dual Data Rate. Unfortunately the mmc_read_ext_csd() function required that the reserved bits be zero instead of ignoring them as it should. This patch makes mmc_read_ext_csd() ignore the CARD_TYPE bits that are reserved or not yet supported. It also stops the function jumping to the end as though an error occurred, when it is only warns that the CARD_TYPE bits (that it does interpret) are invalid. Signed-off-by:
Adrian Hunter <adrian.hunter@nokia.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Jeff Mahoney authored
The reiserfs journal behaves inconsistently when determining whether to allow a mount of a read-only device. This is due to the use of the continue_replay variable to short circuit the journal scanning. If it's set, it's assumed that there are transactions to replay, but there may not be. If it's unset, it's assumed that there aren't any, and that may not be the case either. I've observed two failure cases: 1) Where a clean file system on a read-only device refuses to mount 2) Where a clean file system on a read-only device passes the optimization and then tries writing the journal header to update the latest mount id. The former is easily observable by using a freshly created file system on a read-only loopback device. This patch moves the check into journal_read_transaction, where it can bail out before it's about to replay a transaction. That way it can go through and skip transactions where appropriate, yet still refuse to mount a file system with outstanding transactions. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Jeff Mahoney authored
Commit 57fe60df ("reiserfs: add atomic addition of selinux attributes during inode creation") contains a bug that will cause it to oops when mounting a file system that didn't previously contain extended attributes on a system using security.* xattrs. The issue is that while creating the privroot during mount reiserfs_security_init calls reiserfs_xattr_jcreate_nblocks which dereferences the xattr root. The xattr root doesn't exist, so we get an oops. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=15309Signed-off-by:
-
Michael S. Tsirkin authored
In 2.6.34-rc1, removing vhost_net module causes an oops in sync_mm_rss (called from do_exit) when workqueue is destroyed. This does not happen on net-next, or with vhost on top of to 2.6.33. The issue seems to be introduced by 34e55232 ("mm: avoid false sharing of mm_counter) which added sync_mm_rss() that is passed task->mm, and dereferences it without checking. If task is a kernel thread, mm might be NULL. I think this might also happen e.g. with aio. This patch fixes the oops by calling sync_mm_rss when task->mm is set to NULL. I also added BUG_ON to detect any other cases where counters get incremented while mm is NULL. The oops I observed looks like this: BUG: unable to handle kernel NULL pointer dereference at 00000000000002a8 IP: [<ffffffff810b436d>] sync_mm_rss+0x33/0x6f PGD 0 Oops: 0002 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu7/cache/index2/shared_cpu_map CPU 2 Modules linked in: vhost_net(-) tun bridge stp sunrpc ipv6 cpufreq_ondemand acpi_cpufreq freq_table kvm_intel kvm i5000_edac edac_core rtc_cmos bnx2 button i2c_i801 i2c_core rtc_core e1000e sg joydev ide_cd_mod serio_raw pcspkr rtc_lib cdrom virtio_net virtio_blk virtio_pci virtio_ring virtio af_packet e1000 shpchp aacraid uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode] Pid: 2046, comm: vhost Not tainted 2.6.34-rc1-vhost #25 System Planar/IBM System x3550 -[7978B3G]- RIP: 0010:[<ffffffff810b436d>] [<ffffffff810b436d>] sync_mm_rss+0x33/0x6f RSP: 0018:ffff8802379b7e60 EFLAGS: 00010202 RAX: 0000000000000008 RBX: ffff88023f2390c0 RCX: 0000000000000000 RDX: ffff88023f2396b0 RSI: 0000000000000000 RDI: ffff88023f2390c0 RBP: ffff8802379b7e60 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88023aecfbc0 R11: 0000000000013240 R12: 0000000000000000 R13: ffffffff81051a6c R14: ffffe8ffffc0f540 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880001e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000000002a8 CR3: 000000023af23000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process vhost (pid: 2046, threadinfo ffff8802379b6000, task ffff88023f2390c0) Stack: ffff8802379b7ee0 ffffffff81040687 ffffe8ffffc0f558 ffffffffa00a3e2d <0> 0000000000000000 ffff88023f2390c0 ffffffff81055817 ffff8802379b7e98 <0> ffff8802379b7e98 0000000100000286 ffff8802379b7ee0 ffff88023ad47d78 Call Trace: [<ffffffff81040687>] do_exit+0x147/0x6c4 [<ffffffffa00a3e2d>] ? handle_rx_net+0x0/0x17 [vhost_net] [<ffffffff81055817>] ? autoremove_wake_function+0x0/0x39 [<ffffffff81051a6c>] ? worker_thread+0x0/0x229 [<ffffffff810553c9>] kthreadd+0x0/0xf2 [<ffffffff810038d4>] kernel_thread_helper+0x4/0x10 [<ffffffff81055342>] ? kthread+0x0/0x87 [<ffffffff810038d0>] ? kernel_thread_helper+0x0/0x10 Code: 00 8b 87 6c 02 00 00 85 c0 74 14 48 98 f0 48 01 86 a0 02 00 00 c7 87 6c 02 00 00 00 00 00 00 8b 87 70 02 00 00 85 c0 74 14 48 98 <f0> 48 01 86 a8 02 00 00 c7 87 70 02 00 00 00 00 00 00 8b 87 74 RIP [<ffffffff810b436d>] sync_mm_rss+0x33/0x6f RSP <ffff8802379b7e60> CR2: 00000000000002a8 ---[ end trace 41603ba922beddd2 ]--- Fixing recursive fault but reboot is needed! (note: handle_rx_net is a work item using workqueue in question). sync_mm_rss+0x33/0x6f gave me a hint. I also tried reverting 34e55232 and the oops goes away. The module in question calls use_mm and later unuse_mm from a kernel thread. It is when this kernel thread is destroyed that the crash happens. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Andrea Arcangeli <aarcange@redhat.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Reviewed-by:
Minchan Kim <minchan.kim@gmail.com> Signed-off-by:
-
Miao Xie authored
Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Miao Xie authored
cpuset_mem_spread_node() returns an offline node, and causes an oops. This patch fixes it by initializing task->mems_allowed to node_states[N_HIGH_MEMORY], and updating task->mems_allowed when doing memory hotplug. Signed-off-by:
Nick Piggin <npiggin@suse.de> Tested-by:
-
