- 13 Oct, 2020 3 commits
-
-
Namhyung Kim authored
It should be in a proper mnt namespace when accessing the file. I think this had no problem since the build-id was actually read from map__load() -> dso__load() already. But I'd like to change it in the following commit. Acked-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20201012070214.2074921-4-namhyung@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
I found some events (like PERF_RECORD_CGROUP) are not copied by perf inject due to the missing callbacks. Let's add them. While at it, I've changed the order of the callbacks to match with struct perf_tool so that we can compare them easily. Acked-by:
-
Namhyung Kim authored
Sometimes I can see that 'perf record' piped with 'perf inject' take a long time processing build-ids. So introduce a inject-build-id benchmark to the internals benchmark suite to measure its overhead regularly. It runs the 'perf inject' command internally and feeds the given number of synthesized events (MMAP2 + SAMPLE basically). Usage: perf bench internals inject-build-id <options> -i, --iterations <n> Number of iterations used to compute average (default: 100) -m, --nr-mmaps <n> Number of mmap events for each iteration (default: 100) -n, --nr-samples <n> Number of sample events per mmap event (default: 100) -v, --verbose be more verbose (show iteration count, DSO name, etc) By default, it measures average processing time of 100 MMAP2 events and 10000 SAMPLE events. Below is a result on my laptop. $ perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 25.789 msec (+- 0.202 msec) Average time per event: 2.528 usec (+- 0.020 usec) Average memory usage: 8411 KB (+- 7 KB) Committer testing: $ perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks syscall: System call benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks epoll: Epoll stressing benchmarks internals: Perf-internals benchmarks all: All benchmarks $ perf bench internals # List of available benchmarks for collection 'internals': synthesize: Benchmark perf event synthesis kallsyms-parse: Benchmark kallsyms parsing inject-build-id: Benchmark build-id injection $ perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.202 msec (+- 0.059 msec) Average time per event: 1.392 usec (+- 0.006 usec) Average memory usage: 12650 KB (+- 10 KB) Average build-id-all injection took: 12.831 msec (+- 0.071 msec) Average time per event: 1.258 usec (+- 0.007 usec) Average memory usage: 11895 KB (+- 10 KB) $ $ perf stat -r5 perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.380 msec (+- 0.056 msec) Average time per event: 1.410 usec (+- 0.006 usec) Average memory usage: 12608 KB (+- 11 KB) Average build-id-all injection took: 11.889 msec (+- 0.064 msec) Average time per event: 1.166 usec (+- 0.006 usec) Average memory usage: 11838 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.246 msec (+- 0.065 msec) Average time per event: 1.397 usec (+- 0.006 usec) Average memory usage: 12744 KB (+- 10 KB) Average build-id-all injection took: 12.019 msec (+- 0.066 msec) Average time per event: 1.178 usec (+- 0.006 usec) Average memory usage: 11963 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.321 msec (+- 0.067 msec) Average time per event: 1.404 usec (+- 0.007 usec) Average memory usage: 12690 KB (+- 10 KB) Average build-id-all injection took: 11.909 msec (+- 0.041 msec) Average time per event: 1.168 usec (+- 0.004 usec) Average memory usage: 11938 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.287 msec (+- 0.059 msec) Average time per event: 1.401 usec (+- 0.006 usec) Average memory usage: 12864 KB (+- 10 KB) Average build-id-all injection took: 11.862 msec (+- 0.058 msec) Average time per event: 1.163 usec (+- 0.006 usec) Average memory usage: 12103 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.402 msec (+- 0.053 msec) Average time per event: 1.412 usec (+- 0.005 usec) Average memory usage: 12876 KB (+- 10 KB) Average build-id-all injection took: 11.826 msec (+- 0.061 msec) Average time per event: 1.159 usec (+- 0.006 usec) Average memory usage: 12111 KB (+- 10 KB) Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 4,267.48 msec task-clock:u # 1.502 CPUs utilized ( +- 0.14% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 102,092 page-faults:u # 0.024 M/sec ( +- 0.08% ) 3,894,589,578 cycles:u # 0.913 GHz ( +- 0.19% ) (83.49%) 140,078,421 stalled-cycles-frontend:u # 3.60% frontend cycles idle ( +- 0.77% ) (83.34%) 948,581,189 stalled-cycles-backend:u # 24.36% backend cycles idle ( +- 0.46% ) (83.25%) 5,835,587,719 instructions:u # 1.50 insn per cycle # 0.16 stalled cycles per insn ( +- 0.21% ) (83.24%) 1,267,423,636 branches:u # 296.996 M/sec ( +- 0.22% ) (83.12%) 17,484,290 branch-misses:u # 1.38% of all branches ( +- 0.12% ) (83.55%) 2.84176 +- 0.00222 seconds time elapsed ( +- 0.08% ) $ Acked-by:
-
- 01 Oct, 2020 2 commits
-
-
Arnaldo Carvalho de Melo authored
No change in behaviour: # perf trace -e mmap sleep 1 0.000 ( 0.009 ms): sleep/751870 mmap(len: 143317, prot: READ, flags: PRIVATE, fd: 3) = 0x7fa96d0f7000 0.028 ( 0.004 ms): sleep/751870 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) = 0x7fa96d0f5000 0.037 ( 0.005 ms): sleep/751870 mmap(len: 1872744, prot: READ, flags: PRIVATE|DENYWRITE, fd: 3) = 0x7fa96cf2b000 0.044 ( 0.011 ms): sleep/751870 mmap(addr: 0x7fa96cf50000, len: 1376256, prot: READ|EXEC, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x25000) = 0x7fa96cf50000 0.056 ( 0.007 ms): sleep/751870 mmap(addr: 0x7fa96d0a0000, len: 307200, prot: READ, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x175000) = 0x7fa96d0a0000 0.064 ( 0.007 ms): sleep/751870 mmap(addr: 0x7fa96d0eb000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x1bf000) = 0x7fa96d0eb000 0.075 ( 0.005 ms): sleep/751870 mmap(addr: 0x7fa96d0f1000, len: 13160, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) = 0x7fa96d0f1000 0.253 ( 0.005 ms): sleep/751870 mmap(len: 218049136, prot: READ, flags: PRIVATE, fd: 3) = 0x7fa95ff38000 # # # set -o vi # strace -e mmap sleep 1 mmap(NULL, 143317, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f333bd83000 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f333bd81000 mmap(NULL, 1872744, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f333bbb7000 mmap(0x7f333bbdc000, 1376256, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x25000) = 0x7f333bbdc000 mmap(0x7f333bd2c000, 307200, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x175000) = 0x7f333bd2c000 mmap(0x7f333bd77000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1bf000) = 0x7f333bd77000 mmap(0x7f333bd7d000, 13160, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f333bd7d000 mmap(NULL, 218049136, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f332ebc4000 +++ exited with 0 +++ # And you can as well tweak 'perf trace's output to more closely match strace's: # perf config trace.show_arg_names=no # perf config trace.show_duration=no # perf config trace.show_prefix=yes # perf config trace.show_timestamp=no # perf config trace.show_zeros=yes # perf config trace.no_inherit=yes # perf trace -e mmap sleep 1 mmap(NULL, 143317, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f0d287ca000 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS) = 0x7f0d287c8000 mmap(NULL, 1872744, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0d285fe000 mmap(0x7f0d28623000, 1376256, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x25000) = 0x7f0d28623000 mmap(0x7f0d28773000, 307200, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x175000) = 0x7f0d28773000 mmap(0x7f0d287be000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1bf000) = 0x7f0d287be000 mmap(0x7f0d287c4000, 13160, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS) = 0x7f0d287c4000 mmap(NULL, 218049136, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f0d1b60b000 # # perf config | grep ^trace trace.show_arg_names=no trace.show_duration=no trace.show_prefix=yes trace.show_timestamp=no trace.show_zeros=yes trace.no_inherit=yes # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: -
Arnaldo Carvalho de Melo authored
Will be wired up in the following csets: $ tools/perf/trace/beauty/mmap_prot.sh static const char *mmap_prot[] = { [ilog2(0x1) + 1] = "READ", #ifndef PROT_READ #define PROT_READ 0x1 #endif [ilog2(0x2) + 1] = "WRITE", #ifndef PROT_WRITE #define PROT_WRITE 0x2 #endif [ilog2(0x4) + 1] = "EXEC", #ifndef PROT_EXEC #define PROT_EXEC 0x4 #endif [ilog2(0x8) + 1] = "SEM", #ifndef PROT_SEM #define PROT_SEM 0x8 #endif [ilog2(0x01000000) + 1] = "GROWSDOWN", #ifndef PROT_GROWSDOWN #define PROT_GROWSDOWN 0x01000000 #endif [ilog2(0x02000000) + 1] = "GROWSUP", #ifndef PROT_GROWSUP #define PROT_GROWSUP 0x02000000 #endif }; $ $ $ $ tools/perf/trace/beauty/mmap_prot.sh alpha static const char *mmap_prot[] = { [ilog2(0x4) + 1] = "EXEC", #ifndef PROT_EXEC #define PROT_EXEC 0x4 #endif [ilog2(0x01000000) + 1] = "GROWSDOWN", #ifndef PROT_GROWSDOWN #define PROT_GROWSDOWN 0x01000000 #endif [ilog2(0x02000000) + 1] = "GROWSUP", #ifndef PROT_GROWSUP #define PROT_GROWSUP 0x02000000 #endif [ilog2(0x1) + 1] = "READ", #ifndef PROT_READ #define PROT_READ 0x1 #endif [ilog2(0x8) + 1] = "SEM", #ifndef PROT_SEM #define PROT_SEM 0x8 #endif [ilog2(0x2) + 1] = "WRITE", #ifndef PROT_WRITE #define PROT_WRITE 0x2 #endif }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
- 30 Sep, 2020 1 commit
-
-
Arnaldo Carvalho de Melo authored
So that in older systems we get it in the mmap flags scnprintf routines: $ tools/perf/trace/beauty/mmap_flags.sh | head -9 2> /dev/null static const char *mmap_flags[] = { [ilog2(0x40) + 1] = "32BIT", #ifndef MAP_32BIT #define MAP_32BIT 0x40 #endif [ilog2(0x01) + 1] = "SHARED", #ifndef MAP_SHARED #define MAP_SHARED 0x01 #endif $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
- 29 Sep, 2020 2 commits
-
-
Arnaldo Carvalho de Melo authored
It'll also conditionally generate the defines, so that if we don't have those when building a new tool tarball in an older systems, we get those, and we need them sometimes in the actual scnprintf routine, such as when checking if a flags means we have an extra arg, like with MREMAP_FIXED. $ tools/perf/trace/beauty/mremap_flags.sh static const char *mremap_flags[] = { [ilog2(1) + 1] = "MAYMOVE", #ifndef MREMAP_MAYMOVE #define MREMAP_MAYMOVE 1 #endif [ilog2(2) + 1] = "FIXED", #ifndef MREMAP_FIXED #define MREMAP_FIXED 2 #endif [ilog2(4) + 1] = "DONTUNMAP", #ifndef MREMAP_DONTUNMAP #define MREMAP_DONTUNMAP 4 #endif }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: -
Arnaldo Carvalho de Melo authored
Some headers are not used in building the tools directly, but instead to generate tables that then gets source code included to do id->string and string->id lookups for things like syscall flags and commands. We were adding it directly to tools/include/ and this sometimes gets in the way of building using system headers, lets untangle this a bit. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
- 28 Sep, 2020 12 commits
-
-
Arnaldo Carvalho de Melo authored
To pick up fixes and get v5.10 development in sync with the main kernel sources. Signed-off-by: -
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - NFSv4.2: copy_file_range needs to invalidate caches on success - NFSv4.2: Fix security label length not being reset - pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly on read - pNFS/flexfiles: Fix signed/unsigned type issues with mirror indices" * tag 'nfs-for-5.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: pNFS/flexfiles: Be consistent about mirror index types pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly on read NFSv4.2: fix client's attribute cache management for copy_file_range nfs: Fix security label length not being reset -
Jason A. Donenfeld authored
It seems likely this block was pasted from internal_get_user_pages_fast, which is not passed an mm struct and therefore uses current's. But __get_user_pages_locked is passed an explicit mm, and current->mm is not always valid. This was hit when being called from i915, which uses: pin_user_pages_remote-> __get_user_pages_remote-> __gup_longterm_locked-> __get_user_pages_locked Before, this would lead to an OOPS: BUG: kernel NULL pointer dereference, address: 0000000000000064 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page CPU: 10 PID: 1431 Comm: kworker/u33:1 Tainted: P S U O 5.9.0-rc7+ #140 Hardware name: LENOVO 20QTCTO1WW/20QTCTO1WW, BIOS N2OET47W (1.34 ) 08/06/2020 Workqueue: i915-userptr-acquire __i915_gem_userptr_get_pages_worker [i915] RIP: 0010:__get_user_pages_remote+0xd7/0x310 Call Trace: __i915_gem_userptr_get_pages_worker+0xc8/0x260 [i915] process_one_work+0x1ca/0x390 worker_thread+0x48/0x3c0 kthread+0x114/0x130 ret_from_fork+0x1f/0x30 CR2: 0000000000000064 This commit fixes the problem by using the mm pointer passed to the function rather than the bogus one in current. Fixes: 008cfe44 ("mm: Introduce mm_struct.has_pinned") Tested-by:Chris Wilson <chris@chris-wilson.co.uk> Reported-by:
Harald Arnesen <harald@skogtun.org> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Reviewed-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ian Rogers authored
Ensure 'st' is initialized before an error branch is taken. Fixes test "67: Parse and process metrics" with LLVM msan: ==6757==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x5570edae947d in rblist__exit tools/perf/util/rblist.c:114:2 #1 0x5570edb1c6e8 in runtime_stat__exit tools/perf/util/stat-shadow.c:141:2 #2 0x5570ed92cfae in __compute_metric tools/perf/tests/parse-metric.c:187:2 #3 0x5570ed92cb74 in compute_metric tools/perf/tests/parse-metric.c:196:9 #4 0x5570ed92c6d8 in test_recursion_fail tools/perf/tests/parse-metric.c:318:2 #5 0x5570ed92b8c8 in test__parse_metric tools/perf/tests/parse-metric.c:356:2 #6 0x5570ed8de8c1 in run_test tools/perf/tests/builtin-test.c:410:9 #7 0x5570ed8ddadf in test_and_print tools/perf/tests/builtin-test.c:440:9 #8 0x5570ed8dca04 in __cmd_test tools/perf/tests/builtin-test.c:661:4 #9 0x5570ed8dbc07 in cmd_test tools/perf/tests/builtin-test.c:807:9 #10 0x5570ed7326cc in run_builtin tools/perf/perf.c:313:11 #11 0x5570ed731639 in handle_internal_command tools/perf/perf.c:365:8 #12 0x5570ed7323cd in run_argv tools/perf/perf.c:409:2 #13 0x5570ed731076 in main tools/perf/perf.c:539:3 Fixes: commit f5a56570 ("perf test: Fix memory leaks in parse-metric test") Signed-off-by:Ian Rogers <irogers@google.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: clang-built-linux@googlegroups.com Link: http://lore.kernel.org/lkml/20200923210655.4143682-1-irogers@google.comSigned-off-by:
-
Ian Rogers authored
perf_event_attr bp_addr is a u64. parse-events.y parses it as a u64, but casts it to a void* and then parse-events.c casts it back to a u64. Rather than all the casts, change the type of the address to be a u64. This removes an issue noted in: https://lore.kernel.org/lkml/20200903184359.GC3495158@kernel.org/Signed-off-by:
-
Namhyung Kim authored
It'll expand given events for cgroups A, B and C. $ perf test -v expansion 69: Event expansion for cgroups : --- start --- test child forked, pid 983140 metric expr 1 / IPC for CPI metric expr instructions / cycles for IPC found event instructions found event cycles adding {instructions,cycles}:W copying metric event for cgroup 'A': instructions (idx=0) copying metric event for cgroup 'B': instructions (idx=0) copying metric event for cgroup 'C': instructions (idx=0) test child finished with 0 ---- end ---- Event expansion for cgroups: Ok Signed-off-by: -
Namhyung Kim authored
This is a preparation for a test case of expanding events for multiple cgroups. Instead of using real system cgroup, the test will use fake cgroups so it needs a way to have them without a open file descriptor. Signed-off-by:
-
Namhyung Kim authored
The metricgroup__copy_metric_events() is to handle metrics events when expanding event for cgroups. As the metric events keep pointers to evsel, it should be refreshed when events are cloned during the operation. The perf_stat__collect_metric_expr() is also called in case an event has a metric directly. During the copy, it references evsel by index as the evlist now has cloned evsels for the given cgroup. Also kernel test robot found an issue in the python module import so add empty implementations of those two functions to fix it. Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
-
Namhyung Kim authored
The --for-each-cgroup option is a syntax sugar to monitor large number of cgroups easily. Current command line requires to list all the events and cgroups even if users want to monitor same events for each cgroup. This patch addresses that usage by copying given events for each cgroup on user's behalf. For instance, if they want to monitor 6 events for 200 cgroups each they should write 1200 event names (with -e) AND 1200 cgroup names (with -G) on the command line. But with this change, they can just specify 6 events and 200 cgroups with a new option. A simpler example below: It wants to measure 3 events for 2 cgroups ('A' and 'B'). The result is that total 6 events are counted like below. $ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1 Performance counter stats for 'system wide': 988.18 msec cpu-clock A # 0.987 CPUs utilized 3,153,761,702 cycles A # 3.200 GHz (100.00%) 8,067,769,847 instructions A # 2.57 insn per cycle (100.00%) 982.71 msec cpu-clock B # 0.982 CPUs utilized 3,136,093,298 cycles B # 3.182 GHz (99.99%) 8,109,619,327 instructions B # 2.58 insn per cycle (99.99%) 1.001228054 seconds time elapsed Signed-off-by: -
Namhyung Kim authored
The evsel__clone() is to create an exactly same evsel from same attributes. The function assumes the given evsel is not configured yet so it cares fields set during event parsing. Those fields are now moved together as Jiri suggested. Note that metric events will be handled by later patch. It will be used by perf stat to generate separate events for each cgroup. Signed-off-by:
-
Jin Yao authored
- Update SkylakeX events to v1.21. - Update SkylakeX JSON metrics from TMAM 4.0. Other fixes: - Add NO_NMI_WATCHDOG metric constraint to Backend_Bound - Fix misspelled error Signed-off-by:
Jin Yao <yao.jin@linux.intel.com> Reviewed-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
-
Jin Yao authored
- Update CascadelakeX events to v1.08. - Update CascadelakeX JSON metrics from TMAM 4.0. Other fixes: - Add NO_NMI_WATCHDOG metric constraint to Backend_Bound - Change 'MB/sec' to 'MB' in UNC_M_PMM_BANDWIDTH. Signed-off-by:
-
- 27 Sep, 2020 9 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - ignore compiler stubs for PPC to fix builds - fix the usage of --target mentioned in the LLVM document * tag 'kbuild-fixes-v5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation/llvm: Fix clang target examples scripts/kallsyms: skip ppc compiler stub *.long_branch.* / *.plt_branch.*
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Two fixes for the x86 interrupt code: - Unbreak the magic 'search the timer interrupt' logic in IO/APIC code which got wreckaged when the core interrupt code made the state tracking logic stricter. That caused the interrupt line to stay masked after switching from IO/APIC to PIC delivery mode, which obviously prevents interrupts from being delivered. - Make run_on_irqstack_code() typesafe. The function argument is a void pointer which is then cast to 'void (*fun)(void *). This breaks Control Flow Integrity checking in clang. Use proper helper functions for the three variants reuqired" * tag 'x86-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioapic: Unbreak check_timer() x86/irq: Make run_on_irqstack_cond() typesafe -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "A set of clocksource/clockevents updates: - Reset the TI/DM timer before enabling it instead of doing it the other way round. - Initialize the reload value for the GX6605s timer correctly so the hardware counter starts at 0 again after overrun. - Make error return value negative in the h8300 timer init function" * tag 'timers-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-gx6605s: Fixup counter reload clocksource/drivers/timer-ti-dm: Do reset before enable clocksource/drivers/h8300_timer8: Fix wrong return value in h8300_8timer_init() -
Peter Xu authored
Pinned pages shouldn't be write-protected when fork() happens, because follow up copy-on-write on these pages could cause the pinned pages to be replaced by random newly allocated pages. For huge PMDs, we split the huge pmd if pinning is detected. So that future handling will be done by the PTE level (with our latest changes, each of the small pages will be copied). We can achieve this by let copy_huge_pmd() return -EAGAIN for pinned pages, so that we'll fallthrough in copy_pmd_range() and finally land the next copy_pte_range() call. Huge PUDs will be even more special - so far it does not support anonymous pages. But it can actually be done the same as the huge PMDs even if the split huge PUDs means to erase the PUD entries. It'll guarantee the follow up fault ins will remap the same pages in either parent/child later. This might not be the most efficient way, but it should be easy and clean enough. It should be fine, since we're tackling with a very rare case just to make sure userspaces that pinned some thps will still work even without MADV_DONTFORK and after they fork()ed. Signed-off-by:
-
Peter Xu authored
This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/Suggested-by:
-
Peter Xu authored
This prepares for the future work to trigger early cow on pinned pages during fork(). No functional change intended. Signed-off-by:
-
Peter Xu authored
(Commit message majorly collected from Jason Gunthorpe) Reduce the chance of false positive from page_maybe_dma_pinned() by keeping track if the mm_struct has ever been used with pin_user_pages(). This allows cases that might drive up the page ref_count to avoid any penalty from handling dma_pinned pages. Future work is planned, to provide a more sophisticated solution, likely to turn it into a real counter. For now, make it atomic_t but use it as a boolean for simplicity. Suggested-by:
Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by:
-
Thomas Gleixner authored
Merge tag 'timers-v5.9-rc4' of https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent Pull clocksource/clockevent fixes from Daniel Lezcano: - Fix wrong signed return value when checking of_iomap in the probe function for the h8300 timer (Tianjia Zhang) - Fix reset sequence when setting up the timer on the dm_timer (Tony Lindgren) - Fix counter reload when the interrupt fires on gx6605s (Guo Ren)
-
- 26 Sep, 2020 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Three fixes: one in drivers (lpfc) and two for zoned block devices. The latter also impinges on the block layer but only to introduce a new block API for setting the zone model rather than fiddling with the queue directly in the zoned block driver" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: sd_zbc: Fix ZBC disk initialization scsi: sd: sd_zbc: Fix handling of host-aware ZBC disks scsi: lpfc: Fix initial FLOGI failure due to BBSCN not supported
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "Two fixes for regressions in this cycle, and one that goes to 5.8 stable: - fix leak of getname() retrieved filename - remove plug->nowait assignment, fixing a regression with btrfs - fix for async buffered retry" * tag 'io_uring-5.9-2020-09-25' of git://git.kernel.dk/linux-block: io_uring: ensure async buffered read-retry is setup properly io_uring: don't unconditionally set plug->nowait = true io_uring: ensure open/openat2 name is cleaned on cancelation
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "NVMe pull request from Christoph, and removal of a dead define. - fix error during controller probe that cause double free irqs (Keith Busch) - FC connection establishment fix (James Smart) - properly handle completions for invalid tags (Xianting Tian) - pass the correct nsid to the command effects and supported log (Chaitanya Kulkarni)" * tag 'block-5.9-2020-09-25' of git://git.kernel.dk/linux-block: block: remove unused BLK_QC_T_EAGAIN flag nvme-core: don't use NVME_NSID_ALL for command effects and supported log nvme-fc: fail new connections to a deleted host or remote port nvme-pci: fix NULL req in completion handler nvme: return errors for hwmon init -
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fix from Vasily Gorbik: "Fix truncated ZCRYPT_PERDEV_REQCNT ioctl result. Copy entire reqcnt list" * tag 's390-5.9-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: Fix ZCRYPT_PERDEV_REQCNT ioctl
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "9 patches. Subsystems affected by this patch series: mm (thp, memcg, gup, migration, memory-hotplug), lib, and x86" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: don't rely on system state to detect hot-plug operations mm: replace memmap_context by meminit_context arch/x86/lib/usercopy_64.c: fix __copy_user_flushcache() cache writeback lib/memregion.c: include memregion.h lib/string.c: implement stpcpy mm/migrate: correct thp migration stats mm/gup: fix gup_fast with dynamic page table folding mm: memcontrol: fix missing suffix of workingset_restore mm, THP, swap: fix allocating cluster for swapfile by mistake
-
Minchan Kim authored
syzbot reported the following KASAN splat: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 1 PID: 6826 Comm: syz-executor142 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0x84/0x2ae0 kernel/locking/lockdep.c:4296 Code: ff df 8a 04 30 84 c0 0f 85 e3 16 00 00 83 3d 56 58 35 08 00 0f 84 0e 17 00 00 83 3d 25 c7 f5 07 00 74 2c 4c 89 e8 48 c1 e8 03 <80> 3c 30 00 74 12 4c 89 ef e8 3e d1 5a 00 48 be 00 00 00 00 00 fc RSP: 0018:ffffc90004b9f850 EFLAGS: 00010006 Call Trace: lock_acquire+0x140/0x6f0 kernel/locking/lockdep.c:5006 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:354 [inline] madvise_cold_or_pageout_pte_range+0x52f/0x25c0 mm/madvise.c:389 walk_pmd_range mm/pagewalk.c:89 [inline] walk_pud_range mm/pagewalk.c:160 [inline] walk_p4d_range mm/pagewalk.c:193 [inline] walk_pgd_range mm/pagewalk.c:229 [inline] __walk_page_range+0xe7b/0x1da0 mm/pagewalk.c:331 walk_page_range+0x2c3/0x5c0 mm/pagewalk.c:427 madvise_pageout_page_range mm/madvise.c:521 [inline] madvise_pageout mm/madvise.c:557 [inline] madvise_vma mm/madvise.c:946 [inline] do_madvise+0x12d0/0x2090 mm/madvise.c:1145 __do_sys_madvise mm/madvise.c:1171 [inline] __se_sys_madvise mm/madvise.c:1169 [inline] __x64_sys_madvise+0x76/0x80 mm/madvise.c:1169 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The backing vma was shmem. In case of split page of file-backed THP, madvise zaps the pmd instead of remapping of sub-pages. So we need to check pmd validity after split. Reported-by: syzbot+ecf80462cb7d5d552bc7@syzkaller.appspotmail.com Fixes: 1a4e58cc ("mm: introduce MADV_PAGEOUT") Signed-off-by:Minchan Kim <minchan@kernel.org> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Laurent Dufour authored
In register_mem_sect_under_node() the system_state's value is checked to detect whether the call is made during boot time or during an hot-plug operation. Unfortunately, that check against SYSTEM_BOOTING is wrong because regular memory is registered at SYSTEM_SCHEDULING state. In addition, memory hot-plug operation can be triggered at this system state by the ACPI [1]. So checking against the system state is not enough. The consequence is that on system with interleaved node's ranges like this: Early memory node ranges node 1: [mem 0x0000000000000000-0x000000011fffffff] node 2: [mem 0x0000000120000000-0x000000014fffffff] node 1: [mem 0x0000000150000000-0x00000001ffffffff] node 0: [mem 0x0000000200000000-0x000000048fffffff] node 2: [mem 0x0000000490000000-0x00000007ffffffff] This can be seen on PowerPC LPAR after multiple memory hot-plug and hot-unplug operations are done. At the next reboot the node's memory ranges can be interleaved and since the call to link_mem_sections() is made in topology_init() while the system is in the SYSTEM_SCHEDULING state, the node's id is not checked, and the sections registered to multiple nodes: $ ls -l /sys/devices/system/memory/memory21/node* total 0 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2 In that case, the system is able to boot but if later one of theses memory blocks is hot-unplugged and then hot-plugged, the sysfs inconsistency is detected and this is triggering a BUG_ON(): kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4 CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25 Call Trace: add_memory_resource+0x23c/0x340 (unreliable) __add_memory+0x5c/0xf0 dlpar_add_lmb+0x1b4/0x500 dlpar_memory+0x1f8/0xb80 handle_dlpar_errorlog+0xc0/0x190 dlpar_store+0x198/0x4a0 kobj_attr_store+0x30/0x50 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 vfs_write+0xe8/0x290 ksys_write+0xdc/0x130 system_call_exception+0x160/0x270 system_call_common+0xf0/0x27c This patch addresses the root cause by not relying on the system_state value to detect whether the call is due to a hot-plug operation. An extra parameter is added to link_mem_sections() detailing whether the operation is due to a hot-plug operation. [1] According to Oscar Salvador, using this qemu command line, ACPI memory hotplug operations are raised at SYSTEM_SCHEDULING state: $QEMU -enable-kvm -machine pc -smp 4,sockets=4,cores=1,threads=1 -cpu host -monitor pty \ -m size=$MEM,slots=255,maxmem=4294967296k \ -numa node,nodeid=0,cpus=0-3,mem=512 -numa node,nodeid=1,mem=512 \ -object memory-backend-ram,id=memdimm0,size=134217728 -device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0 \ -object memory-backend-ram,id=memdimm1,size=134217728 -device pc-dimm,node=0,memdev=memdimm1,id=dimm1,slot=1 \ -object memory-backend-ram,id=memdimm2,size=134217728 -device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \ -object memory-backend-ram,id=memdimm3,size=134217728 -device pc-dimm,node=0,memdev=memdimm3,id=dimm3,slot=3 \ -object memory-backend-ram,id=memdimm4,size=134217728 -device pc-dimm,node=1,memdev=memdimm4,id=dimm4,slot=4 \ -object memory-backend-ram,id=memdimm5,size=134217728 -device pc-dimm,node=1,memdev=memdimm5,id=dimm5,slot=5 \ -object memory-backend-ram,id=memdimm6,size=134217728 -device pc-dimm,node=1,memdev=memdimm6,id=dimm6,slot=6 \ Fixes: 4fbce633 ("mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()") Signed-off-by:Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Oscar Salvador <osalvador@suse.de> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200915094143.79181-3-ldufour@linux.ibm.comSigned-off-by:
-
Laurent Dufour authored
Patch series "mm: fix memory to node bad links in sysfs", v3. Sometimes, firmware may expose interleaved memory layout like this: Early memory node ranges node 1: [mem 0x0000000000000000-0x000000011fffffff] node 2: [mem 0x0000000120000000-0x000000014fffffff] node 1: [mem 0x0000000150000000-0x00000001ffffffff] node 0: [mem 0x0000000200000000-0x000000048fffffff] node 2: [mem 0x0000000490000000-0x00000007ffffffff] In that case, we can see memory blocks assigned to multiple nodes in sysfs: $ ls -l /sys/devices/system/memory/memory21 total 0 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2 -rw-r--r-- 1 root root 65536 Aug 24 05:27 online -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index drwxr-xr-x 2 root root 0 Aug 24 05:27 power -r--r--r-- 1 root root 65536 Aug 24 05:27 removable -rw-r--r-- 1 root root 65536 Aug 24 05:27 state lrwxrwxrwx 1 root root 0 Aug 24 05:25 subsystem -> ../../../../bus/memory -rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent -r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones The same applies in the node's directory with a memory21 link in both the node1 and node2's directory. This is wrong but doesn't prevent the system to run. However when later, one of these memory blocks is hot-unplugged and then hot-plugged, the system is detecting an inconsistency in the sysfs layout and a BUG_ON() is raised: kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084! LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4 CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25 Call Trace: add_memory_resource+0x23c/0x340 (unreliable) __add_memory+0x5c/0xf0 dlpar_add_lmb+0x1b4/0x500 dlpar_memory+0x1f8/0xb80 handle_dlpar_errorlog+0xc0/0x190 dlpar_store+0x198/0x4a0 kobj_attr_store+0x30/0x50 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 vfs_write+0xe8/0x290 ksys_write+0xdc/0x130 system_call_exception+0x160/0x270 system_call_common+0xf0/0x27c This has been seen on PowerPC LPAR. The root cause of this issue is that when node's memory is registered, the range used can overlap another node's range, thus the memory block is registered to multiple nodes in sysfs. There are two issues here: (a) The sysfs memory and node's layouts are broken due to these multiple links (b) The link errors in link_mem_sections() should not lead to a system panic. To address (a) register_mem_sect_under_node should not rely on the system state to detect whether the link operation is triggered by a hot plug operation or not. This is addressed by the patches 1 and 2 of this series. Issue (b) will be addressed separately. This patch (of 2): The memmap_context enum is used to detect whether a memory operation is due to a hot-add operation or happening at boot time. Make it general to the hotplug operation and rename it as meminit_context. There is no functional change introduced by this patch Suggested-by: -
Mikulas Patocka authored
If we copy less than 8 bytes and if the destination crosses a cache line, __copy_user_flushcache would invalidate only the first cache line. This patch makes it invalidate the second cache line as well. Fixes: 0aed55af ("x86, uaccess: introduce copy_from_iter_flushcache for pmem / cache-bypass operations") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Dan Williams <dan.j.wiilliams@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/alpine.LRH.2.02.2009161451140.21915@file01.intranet.prod.int.rdu2.redhat.comSigned-off-by:
-
Jason Yan authored
This addresses the following sparse warning: lib/memregion.c:8:5: warning: symbol 'memregion_alloc' was not declared. Should it be static? lib/memregion.c:14:6: warning: symbol 'memregion_free' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Nick Desaulniers authored
LLVM implemented a recent "libcall optimization" that lowers calls to `sprintf(dest, "%s", str)` where the return value is used to `stpcpy(dest, str) - dest`. This generally avoids the machinery involved in parsing format strings. `stpcpy` is just like `strcpy` except it returns the pointer to the new tail of `dest`. This optimization was introduced into clang-12. Implement this so that we don't observe linkage failures due to missing symbol definitions for `stpcpy`. Similar to last year's fire drill with: commit 5f074f3e ("lib/string.c: implement a basic bcmp") The kernel is somewhere between a "freestanding" environment (no full libc) and "hosted" environment (many symbols from libc exist with the same type, function signature, and semantics). As Peter Anvin notes, there's not really a great way to inform the compiler that you're targeting a freestanding environment but would like to opt-in to some libcall optimizations (see pr/47280 below), rather than opt-out. Arvind notes, -fno-builtin-* behaves slightly differently between GCC and Clang, and Clang is missing many __builtin_* definitions, which I consider a bug in Clang and am working on fixing. Masahiro summarizes the subtle distinction between compilers justly: To prevent transformation from foo() into bar(), there are two ways in Clang to do that; -fno-builtin-foo, and -fno-builtin-bar. There is only one in GCC; -fno-buitin-foo. (Any difference in that behavior in Clang is likely a bug from a missing __builtin_* definition.) Masahiro also notes: We want to disable optimization from foo() to bar(), but we may still benefit from the optimization from foo() into something else. If GCC implements the same transform, we would run into a problem because it is not -fno-builtin-bar, but -fno-builtin-foo that disables that optimization. In this regard, -fno-builtin-foo would be more future-proof than -fno-built-bar, but -fno-builtin-foo is still potentially overkill. We may want to prevent calls from foo() being optimized into calls to bar(), but we still may want other optimization on calls to foo(). It seems that compilers today don't quite provide the fine grain control over which libcall optimizations pseudo-freestanding environments would prefer. Finally, Kees notes that this interface is unsafe, so we should not encourage its use. As such, I've removed the declaration from any header, but it still needs to be exported to avoid linkage errors in modules. Reported-by:
Sami Tolvanen <samitolvanen@google.com> Suggested-by:
Andy Lavr <andy.lavr@gmail.com> Suggested-by:
Arvind Sankar <nivedita@alum.mit.edu> Suggested-by:
Joe Perches <joe@perches.com> Suggested-by:
Kees Cook <keescook@chromium.org> Suggested-by:
Masahiro Yamada <masahiroy@kernel.org> Suggested-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200914161643.938408-1-ndesaulniers@google.com Link: https://bugs.llvm.org/show_bug.cgi?id=47162 Link: https://bugs.llvm.org/show_bug.cgi?id=47280 Link: https://github.com/ClangBuiltLinux/linux/issues/1126 Link: https://man7.org/linux/man-pages/man3/stpcpy.3.html Link: https://pubs.opengroup.org/onlinepubs/9699919799/functions/stpcpy.html Link: https://reviews.llvm.org/D85963Signed-off-by:
-
