Auto-conversion was done done using the coccinelle script at
https://github.com/groeck/coccinelle-patches/blob/master/hwmon/sensor-devattr-w6.cocciSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Auto-conversion was done done using the coccinelle script at
https://github.com/groeck/coccinelle-patches/blob/master/hwmon/sensor-devattr-w6.cocciSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Conversion was done done using the coccinelle script at
https://github.com/groeck/coccinelle-patches/raw/master/hwmon/sensor-devattr-w6.cocciSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Introduce SENSOR_DEVICE_ATTR_{RO,RW,WO} and SENSOR_DEVICE_ATTR_2_{RO,RW,WO}
as simplified variants of SENSOR_DEVICE_ATTR and SENSOR_DEVICE_ATTR_2 to
simplify the source code, improve readbility, and reduce the chance of
inconsistencies.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The STLM75 is a high-precision digital CMOS temperature sensor
IC with a sigma-delta temperature-to-digital converter.

The configuration register mapping is similar to existing lm75
but the sample rate is 150ms(max).

Tested on real hardware and verified temperature readings are correct.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The TI TMP451 temperature sensors are compatible with the National LM90
temperature sensors.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Sort the entries while at it.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Use an enum to index the array, so that it is possible to add sorted
entries without causing churn.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

More of the same...
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

These are Negative Temperature Coefficient thermistors, like the others
in the list.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

There is a spelling mistake in the module description text, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

This patch remove extra space after a dot.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

This patch fix a typo where build is used instead of built.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Allow the module to be loaded on Dell XPS 9570, without having to
provide the "force=1" option.
Signed-off-by: Michele Sorcinelli <michelesr@autistici.org>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Modify macros for tachometer fault status reading for making it more
simple and clear.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

There are a few sysfs entries being exposed to user space by the
ina2xx hwmon driver while not getting explicitly documented. So
this patch just adds a description section for them.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The tmp108 does have an alert output that can be used as interrupt source
and can of course also be used as part of a thermal sensor setup for things
like thermal-based cpu frequencies, so document the necessary properties.
Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

According to the code right before the removed line, data->kind
should be either from DT or from id pointer. So there shouldn't
be an additional overwriting after the if-else statement.

So this patch just removes the overwriting line.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

If all three channels are disabled via in[123]_enable ABI,
the driver could suspend the chip for power saving purpose.

So this patch adds the PM runtime support in order to gain
more power control than system suspend and resume use case.

For PM runtime, there are a few related changes happening:
1) Added a new pm_dev device pointer for all the PM runtime
   callbacks. This is because hwmon core registers a child
   device for each hwmon driver and passes it back to each
   driver. So there might be a mismatch between two device
   pointers in the driver if mixing using them.
2) Added a check in ina3221_is_enabled() to make sure that
   the chip is resumed.
3) Bypassed the unchanged status in ina3221_write_enable()
   in order to keep the PM runtime refcount being matched.
4) Removed the reset routine in the probe() by calling the
   resume() via pm_runtime_get_sync() instead, as they're
   similar. It's also necessary to do so to match initial
   PM refcount with the number of enabled channels.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The data might need some time to get ready after channel enabling,
although the data register is always readable. The CVRF bit is to
indicate that data conversion is finished, so polling the CVRF bit
before data reading could ensure the result being valid.

An alternative way could be to wait for expected time between the
channel enabling and the data reading. And this could avoid extra
I2C communications. However, INA3221 seemly takes longer time than
what's stated in the datasheet. Test results show that sometimes
it couldn't finish data conversion in time.

So this patch plays safe by adding a CVRF polling to make sure the
data register is updated with the new data.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

This change adds a mutex to serialize accesses of sysfs attributes.

This is required when polling CVRF bit of the MASK/ENABLE register
because this bit is cleared on a read of this MASK/ENABLE register
or a write to CONFIG register, which means that this bit might be
accidentally cleared by reading other fields like alert flags.

So this patch adds a mutex lock to protect the write() and read()
callbacks. The read_string() callback won't need the lock since it
just returns the label without touching any hardware register.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

There is nothing critically wrong to read these two attributes
without having a is_enabled() check at this point. But reading
the MASK_ENABLE register would clear the CVRF bit according to
the datasheet. So it'd be safer to fence for disabled channels
in order to add pm runtime feature.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The OCC provides a variety of additional information about the state of
the host processor, such as throttling, error conditions, and the number
of OCCs detected in the system. This information is essential to service
processor applications such as fan control and host management.
Therefore, export this data in the form of sysfs attributes attached to
the platform device (to which the hwmon device is also attached).
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Setup the sensor attributes for every OCC sensor found by the first poll
response. Register the attributes with hwmon.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add structures to define all sensor types and versions. Add sysfs show
and store functions for each sensor type. Add a method to construct the
"set user power cap" command and send it to the OCC. Add rate limit to
polling the OCC (in case user-space reads our hwmon entries rapidly).
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add method to parse the response from the OCC poll command. This only
needs to be done during probe(), since the OCC shouldn't change the
number or format of sensors while it's running. The parsed response
allows quick access to sensor data, as well as information on the
number and version of sensors, which we need to instantiate hwmon
attributes.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

For the P8 OCC, add the procedure to send a command to the OCC over I2C
bus. This involves writing the OCC command registers with serial
communication operations (SCOMs) interpreted by the I2C slave. For the
P9 OCC, add a procedure to use the OCC in-kernel API to send a command
to the OCC through the SBE.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The OCC is a device embedded on a POWER processor that collects and
aggregates sensor data from the processor and system. The OCC can
provide the raw sensor data as well as perform thermal and power
management on the system.

This driver provides a hwmon interface to the OCC from a service
processor (e.g. a BMC). The driver supports both POWER8 and POWER9 OCCs.
Communications with the POWER8 OCC are established over standard I2C
bus. The driver communicates with the POWER9 OCC through the FSI-based
OCC driver, which handles the lower-level communication details.

This patch lays out the structure of the OCC hwmon driver. There are two
platform drivers, one each for P8 and P9 OCCs. These are probed through
the I2C tree and the FSI-based OCC driver, respectively. The patch also
defines the first common structures and methods between the two OCC
versions.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
[groeck: Fix up SPDX license identifier]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Document the bindings for I2C-based OCC hwmon device.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Document the hwmon interface for the OCC.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The OCC is a device embedded on a POWER processor that collects and
aggregates sensor data from the processor and system. The OCC can
provide the raw sensor data as well as perform thermal and power
management on the system.

This driver provides an atomic communications channel between a service
processor (e.g. a BMC) and the OCC. The driver is dependent on the FSI
SBEFIFO driver to get hardware access through the SBE to the OCC SRAM.
Commands are issued to the SBE to send or fetch data to the SRAM.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Document the bindings for the FSI-attached POWER9 On-Chip Controller.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

As per the usual standard with hwmon drivers the mapping to sysfs
entries follows the register map of the device e.g. in0_input
corresponds to the register 0x20, in1_input corresponds to 0x21 etc.

Hardware designers tend to work with input pins instead of registers
which is where things start to get confusing. A hardware designer might
say "the 1.5V rail is connected to the VCCP pin" leaving the software
designer none the wiser as to which of the sysfs entries should be
associated with the label "1.5V".

Try to bridge the gap by documenting the mapping of sysfs entries to
the corresponding pins. This should allow someone to create a
configuration file or other mapping without needing to dive into the
code and ADT datasheets.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

struct attribute::name which this local variable name is eventually
assigned to is "const char*", and so is the template parameter. We might
as well preserve the constness all the way through.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The ADM series of hotswap controllers support extending
the current measurement range by using a sensing resistor
value other than the typical 1 mOhm. For example, using a 0.5 mOhm
sensing resistor doubles the maximal current can be measured.

Current driver assumes a shunt resistor value of 1 mOhm in calculation,
meaning for other resistor values, hwmon will report scaled
current/power measurements. This patch parses device tree parameter
"shunt-resistor-micro-ohms", if there is one.
Signed-off-by: Kun Yi <kunyi@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

adm127x are hot-swap controllers that allow a circuit board to be removed from
or inserted into a live backplane. This patch adds the device tree
bindings documentation.
Signed-off-by: Kun Yi <kunyi@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Pull ARM SoC fixes from Olof Johansson:
 "Volume is a little higher than usual due to a set of gpio fixes for
  Davinci platforms that's been around a while, still seemed appropriate
  to not hold off until next merge window.

  Besides that it's the usual mix of minor fixes, mostly corrections of
  small stuff in device trees.

  Major stability-related one is the removal of a regulator from DT on
  Rock960, since DVFS caused undervoltage. I expect it'll be restored
  once they figure out the underlying issue"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  MAINTAINERS: Remove unused Qualcomm SoC mailing list
  ARM: davinci: dm644x: set the GPIO base to 0
  ARM: davinci: da830: set the GPIO base to 0
  ARM: davinci: dm355: set the GPIO base to 0
  ARM: davinci: dm646x: set the GPIO base to 0
  ARM: davinci: dm365: set the GPIO base to 0
  ARM: davinci: da850: set the GPIO base to 0
  gpio: davinci: restore a way to manually specify the GPIO base
  ARM: davinci: dm644x: define gpio interrupts as separate resources
  ARM: davinci: dm355: define gpio interrupts as separate resources
  ARM: davinci: dm646x: define gpio interrupts as separate resources
  ARM: davinci: dm365: define gpio interrupts as separate resources
  ARM: davinci: da8xx: define gpio interrupts as separate resources
  ARM: dts: at91: sama5d2: use the divided clock for SMC
  ARM: dts: imx51-zii-rdu1: Remove EEPROM node
  ARM: dts: rockchip: Remove @0 from the veyron memory node
  arm64: dts: rockchip: Fix PCIe reset polarity for rk3399-puma-haikou.
  arm64: dts: qcom: msm8998: Reserve gpio ranges on MTP
  arm64: dts: sdm845-mtp: Reserve reserved gpios
  arm64: dts: ti: k3-am654: Fix wakeup_uart reg address
  ...

Pull xen fixes from Juergen Gross:

 - A revert of a previous commit as it is no longer necessary and has
   shown to cause problems in some memory hotplug cases.

 - Some small fixes and a minor cleanup.

 - A patch for adding better diagnostic data in a very rare failure
   case.

* tag 'for-linus-4.20a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  pvcalls-front: fixes incorrect error handling
  Revert "xen/balloon: Mark unallocated host memory as UNUSABLE"
  xen: xlate_mmu: add missing header to fix 'W=1' warning
  xen/x86: add diagnostic printout to xen_mc_flush() in case of error
  x86/xen: cleanup includes in arch/x86/xen/spinlock.c