- 19 Jun, 2023 15 commits
-
-
Johannes Berg authored
We have the data structure set up to store the parameters per link, but weren't using them. Fix that and store them in the right link. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.332c4949a1be.Icae03975d578b0cc82279911a1ea7cbc313046d6@changeidSigned-off-by:
-
Johannes Berg authored
Again, during some (botched) FW restart scenarios we can end up with a NULL link in the driver but mac80211 thinking all is still going OK. If we try to TX at the same time, we can crash there. Fix that by checking for a NULL link during TX. Signed-off-by:
-
Johannes Berg authored
We've observed that in some botched firmware restart scenarios when the firmware crashes again while we're reconfiguring, we can hit NULL pointer crashes here. The underlying issue is the botched restart which we need to fix separately, but until we can do that, don't crash hard here. Signed-off-by:
-
Ariel Malamud authored
On fw error dump, dmesg prints FSEQ register data. Add 4 additional prints in order to match those being dumped by Windows driver. Allows fw infra to correctly detect version mismatch. Signed-off-by:
Ariel Malamud <ariel.malamud@intel.com> Signed-off-by:
-
Johannes Berg authored
There are evidently cases where the firmware completes the reset but the interrupt isn't received correctly, so check for the interrupt again after the timeout, and don't dump the firmware error log if the right bit is set. Signed-off-by:
-
Johannes Berg authored
In mac80211, it's required that we pull from TXQs by calling ieee80211_tx_dequeue() only with softirqs disabled. However, in iwl_mvm_queue_state_change() we're often called with them enabled, e.g. from flush if anything was flushed, triggering a mac80211 warning. Fix that by disabling the softirqs across the TX call. Fixes: cfbc6c4c ("iwlwifi: mvm: support mac80211 TXQs model") Signed-off-by:
-
Johannes Berg authored
We have this helper now instead of open-coding the check for the dmi_tas_approved_list, so use it even here. It was added for debugfs use, but it's better to be consistent. Signed-off-by:
-
Johannes Berg authored
iwl_acpi_get_wifi_pkg_range(), iwl_acpi_get_wifi_pkg() and iwl_acpi_get_object() need not be exported etc., they're used only within the same file. Make them static. Signed-off-by:
-
Ilan Peer authored
If HT STBC is not supported, do not indicate support for VHT TX STBC. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Johannes Berg authored
We can't just dereference the sband->iftype_data pointer, that's an array so we need to access the right entry. Use the previously introduced helper functions to do that. There are also cases, e.g. when loading with disable_11ax=1, where the pointer might be NULL but we still attempt to use it, causing a crash. Fixes: 529281bd ("iwlwifi: mvm: limit TLC according to our HE capabilities") Signed-off-by:
-
Mukesh Sisodiya authored
While vif pointers are protected by the corresponding "*active" fields, static checkers can get confused sometimes. Add an explicit check. Signed-off-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by:
-
Johannes Berg authored
The hardware isn't going to get fixed, so this mode cannot work in the foreseeable future. Remove it. Signed-off-by:
-
Ilan Peer authored
Add debugfs entry to report dormant (valid but disabled) links. Signed-off-by:
-
Ilan Peer authored
When the association is complete, do not configure disabled links, and track them as part of the interface data. Signed-off-by:
-
Johannes Berg authored
There are some locking changes that will later otherwise cause conflicts, so merge wireless into wireless-next to avoid those. Signed-off-by:
-
- 16 Jun, 2023 4 commits
-
-
Kalle Valo authored
GCC 12.2 with W=1 warns: drivers/net/wireless/legacy/ray_cs.c:630:17: warning: 'strncpy' specified bound 32 equals destination size [-Wstringop-truncation] The driver uses SSID as a string which is just wrong, it should be treated as a byte array instead. But as the driver is ancient and most likely there are no users so convert it to use strscpy(). This makes sure that the string is NUL-terminated and also the warning is fixed. Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230613140918.389690-5-kvalo@kernel.org
-
Kalle Valo authored
With GCC 13.1 and W=1 hostap has a warning: drivers/net/wireless/intersil/hostap/hostap_ioctl.c:3633:17: warning: 'strncpy' specified bound 16 equals destination size [-Wstringop-truncation] fortify-string.h recommends not to use strncpy() so use strscpy() which fixes the warning. Also now it's guarenteed that the string is NUL-terminated. Compile tested only. Signed-off-by:
-
Kalle Valo authored
With GCC 13.1 and W=1 brcmsmac has warnings like this: ./include/trace/stages/stage5_get_offsets.h:23:31: warning: function 'trace_event_get_offsets_brcms_dbg' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format] Add a workaround which disables -Wsuggest-attribute=format in brcms_trace_brcmsmac_msg.h. I see similar workarounds in other drivers as well. Compile tested only. Signed-off-by:
-
Kalle Valo authored
With GCC 13.1 and W=1 brcmfmac has warnings like this: ./include/trace/perf.h:26:16: warning: function 'perf_trace_brcmf_dbg' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format] Add a workaround which disables -Wsuggest-attribute=format in tracepoint.h. I see similar workarounds in other drivers as well. Compile tested only. Signed-off-by:
-
- 15 Jun, 2023 5 commits
-
-
Dmitry Antipov authored
Fix spelling typo of IQK debug messages. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Acked-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Dmitry Antipov authored
Drop useless '_iqk_track()' and 'rtw8852a_iqk_track()' (they just change 'thermal_rek_en' field which is set but unused and so removed as well) functions, set but unused 'kcount' field of 'struct rtw89_iqk_info', and convert 'thermal' to local variables where appropriate (it doesn't need to have longer storage duration because it is actually used for the debugging purposes only). Signed-off-by:
-
Dmitry Antipov authored
Remove a bunch of unused (and set but unused) fields from 'struct rtw89_btc_wl_nhm', 'struct rtw89_dle_info', 'struct rtw89_hal' and 'struct rtw89_env_monitor_info' driver-specific data structures, adjust related bits. Signed-off-by:
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). Direct replacement is safe here since DEV_ASSIGN is only used by TRACE macros and the return values are ignored. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Deming Wang authored
Fix typo in the description of 'non-succesfull'. Signed-off-by:
Deming Wang <wangdeming@inspur.com> Acked-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
-
- 14 Jun, 2023 16 commits
-
-
Johannes Berg authored
When we restart the firmware, we shouldn't keep old debug data around. Since the "allocate" function might not reallocate the memory blocks (they're only freed when we unbind from the device), clear the memory to have a clean slate for debug data. This is a bit more complex since we normally don't enter into the allocation function, but duplicating the logic didn't seem enticing either, so rework the allocation a bit to always go into the individual block allocation, but there clear if it's already allocated, rather than allocating again. Signed-off-by:
-
Johannes Berg authored
The iwl_pcie_alloc_fw_monitor_block() function has an argument that's only ever hard-coded to 11, remove it and hard-code the value into the function itself with a comment. Signed-off-by:
-
Johannes Berg authored
When we restart the firmware, we shouldn't keep old debug data around. Since the "allocate" function might not reallocate the memory block (it's only freed when we unbind from the device), clear the memory to have a clean slate for debug data. Signed-off-by:
-
Johannes Berg authored
Given the existing code in iwl_dbg_tlv_update_drams(), the following can happen and cause firmware asserts, and even the device to become unusable: * We set the magic so the firmware will use the data; * we try to fill multiple allocation IDs, with at least one successful, but - crucially - one failing and thus not touching the data; * we don't clear the data since there was one success. This doesn't seem like much of a problem just yet, however, what happens now is that the allocation ID(s) that failed are not initialized. There are two additional things to know: * we never free these allocations across FW restart or interface down/up etc., in fact we never free them until the driver is unbound from the device (e.g. unloaded) * the firmware uses the DRAM info structure for real debug data when it has used it completely Given that, and the fact that we never initialize the data on restart, we can be unlucky and end up with an allocation that looks for the most part valid (valid ID, valid number of buffers, etc.) but has bad sizes - causing the firmware to throw an assert we can never recover from. Fixing the code to have the entire buffers cleared (which we should do so old debug data isn't sticking around) is a bit more complex, so as a first step make the actual code that fills the information more robust by clearing the structure first, and filling the magic values only if it actually succeeded for one, rather than doing it the other way around. Signed-off-by:
-
Emmanuel Grumbach authored
Newest firmware don't advertise the version of ADD_STA because it has been replaced by another command. There are old firmware images that also don't advertise it. Replace all the checks with a new inline, and in that check for either MLD API or the ADD_STA command version. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Johannes Berg authored
The firmware only supports a single IGTK, and due to some changes it really doesn't like to have multiple programmed in later versions. Since only newer firmware cannot remove a key that isn't present any more, adjust only the MLD API code to keep track of the previous IGTK and remove it when a new one is added. Signed-off-by:
-
Gregory Greenman authored
Account for IWL_SEC_WEP_KEY_OFFSET when needed while verifying key_len size in iwl_mvm_sec_key_add(). Signed-off-by:
-
Mukesh Sisodiya authored
Add support for C0 version of MAC and RF for BZ and GL devices. Signed-off-by:
-
Gregory Greenman authored
Add support for Extra EHT LTF defined in 9.4.2.313 EHT Capabilities element. Signed-off-by:
-
Ariel Malamud authored
The iwl_mvm_get_lmac_id() function is currently defined as a static inline function under fw/api and receives mvm's fw pointer. It will need the ability to access other mvm struct members for future capabilities such as debug. Move the function out of the fw/api and into mvm proper as a regular function and have it receive the pointer to mvm. Signed-off-by:
-
Alon Giladi authored
Add prints of ETSI and China bits. Check if need to mask the China bit (when the firmware doesn't support it) in a separate flow, so it will be easier to follow the conditions. Add a separate message for the command version. Signed-off-by:
Alon Giladi <alon.giladi@intel.com> Signed-off-by:
-
Mukesh Sisodiya authored
Initialize the phy_data.rx_vec for both version-3 and above where it is 4-byte data size and below version which has data size of 2-byte. The data will be sent uninitialized in called function if notification version is less than three. Signed-off-by:
-
Haim Dreyfuss authored
Currently, we only need to support BTM rejection. However, in the future we might want to support other BTM modes. Rephrase its naming. Signed-off-by:
Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by:
-
Johannes Berg authored
Support new firmware that can validate the validate bits in sniffer mode, and advertise that fact and the result of the checks in the U-SIG radiotap field. Signed-off-by:
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). Direct replacement is safe here since LOCAL_ASSIGN is only used by TRACE macros and the return values are ignored. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). Direct replacement is safe here since WIPHY_ASSIGN is only used by TRACE macros and the return values are ignored. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
-
