- 02 Jun, 2020 8 commits
-
-
Ilya Leoshkevich authored
Currently used 0x0000 filler confuses bfd disassembler, making bpftool prog dump xlated output nearly useless. Fix by using a real instruction. Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200602174555.2501389-1-iii@linux.ibm.com
-
Ilya Leoshkevich authored
Certain kernel functions (e.g. get_vtimer/set_vtimer) cause kernel panic when the stack is not 8-byte aligned. Currently JITed BPF programs may trigger this by allocating stack frames with non-rounded sizes and then being interrupted. Fix by using rounded fp->aux->stack_depth. Signed-off-by:
-
Alexei Starovoitov authored
Adjust verifier test due to addition of new field. Fixes: c3c16f2e ("bpf: Add rx_queue_mapping to bpf_sock") Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Andrii Nakryiko authored
Make sample_cnt volatile to fix possible selftests failure due to compiler optimization preventing latest sample_cnt value to be visible to main thread. sample_cnt is incremented in background thread, which is then joined into main thread. So in terms of visibility sample_cnt update is ok. But because it's not volatile, compiler might make optimizations that would prevent main thread to see latest updated value. Fix this by marking global variable volatile. Fixes: cb1c9ddd ("selftests/bpf: Add BPF ringbuf selftests") Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200602050349.215037-1-andriin@fb.com
-
Alexei Starovoitov authored
Daniel Borkmann says: ==================== This series fixes an issue originally reported by Lorenz Bauer where using the bpf_skb_adjust_room() helper hid a checksum bug since it wasn't adjusting CHECKSUM_UNNECESSARY's skb->csum_level after decap. The fix is two-fold: i) We do a safe reset in bpf_skb_adjust_room() to CHECKSUM_NONE with an opt- out flag BPF_F_ADJ_ROOM_NO_CSUM_RESET. ii) We add a new bpf_csum_level() for the latter in order to allow users to manually inc/dec the skb->csum_level when needed. The series is rebased against latest bpf-next tree. It can be applied there, or to bpf after the merge win sync from net-next. Thanks! ==================== Signed-off-by: -
Daniel Borkmann authored
Adapt bpf_skb_adjust_room() to pass in BPF_F_ADJ_ROOM_NO_CSUM_RESET flag and use the new bpf_csum_level() helper to inc/dec the checksum level by one after the encap/decap. Signed-off-by:
Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/e7458f10e3f3d795307cbc5ad870112671d9c6f7.1591108731.git.daniel@iogearbox.net
-
Daniel Borkmann authored
Add a bpf_csum_level() helper which BPF programs can use in combination with bpf_skb_adjust_room() when they pass in BPF_F_ADJ_ROOM_NO_CSUM_RESET flag to the latter to avoid falling back to CHECKSUM_NONE. The bpf_csum_level() allows to adjust CHECKSUM_UNNECESSARY skb->csum_levels via BPF_CSUM_LEVEL_{INC,DEC} which calls __skb_{incr,decr}_checksum_unnecessary() on the skb. The helper also allows a BPF_CSUM_LEVEL_RESET which sets the skb's csum to CHECKSUM_NONE as well as a BPF_CSUM_LEVEL_QUERY to just return the current level. Without this helper, there is no way to otherwise adjust the skb->csum_level. I did not add an extra dummy flags as there is plenty of free bitspace in level argument itself iff ever needed in future. Signed-off-by:Alan Maguire <alan.maguire@oracle.com> Acked-by:
-
Daniel Borkmann authored
Lorenz recently reported: In our TC classifier cls_redirect [0], we use the following sequence of helper calls to decapsulate a GUE (basically IP + UDP + custom header) encapsulated packet: bpf_skb_adjust_room(skb, -encap_len, BPF_ADJ_ROOM_MAC, BPF_F_ADJ_ROOM_FIXED_GSO) bpf_redirect(skb->ifindex, BPF_F_INGRESS) It seems like some checksums of the inner headers are not validated in this case. For example, a TCP SYN packet with invalid TCP checksum is still accepted by the network stack and elicits a SYN ACK. [...] That is, we receive the following packet from the driver: | ETH | IP | UDP | GUE | IP | TCP | skb->ip_summed == CHECKSUM_UNNECESSARY ip_summed is CHECKSUM_UNNECESSARY because our NICs do rx checksum offloading. On this packet we run skb_adjust_room_mac(-encap_len), and get the following: | ETH | IP | TCP | skb->ip_summed == CHECKSUM_UNNECESSARY Note that ip_summed is still CHECKSUM_UNNECESSARY. After bpf_redirect()'ing into the ingress, we end up in tcp_v4_rcv(). There, skb_checksum_init() is turned into a no-op due to CHECKSUM_UNNECESSARY. The bpf_skb_adjust_room() helper is not aware of protocol specifics. Internally, it handles the CHECKSUM_COMPLETE case via skb_postpull_rcsum(), but that does not cover CHECKSUM_UNNECESSARY. In this case skb->csum_level of the original skb prior to bpf_skb_adjust_room() call was 0, that is, covering UDP. Right now there is no way to adjust the skb->csum_level. NICs that have checksum offload disabled (CHECKSUM_NONE) or that support CHECKSUM_COMPLETE are not affected. Use a safe default for CHECKSUM_UNNECESSARY by resetting to CHECKSUM_NONE and add a flag to the helper called BPF_F_ADJ_ROOM_NO_CSUM_RESET that allows users from opting out. Opting out is useful for the case where we don't remove/add full protocol headers, or for the case where a user wants to adjust the csum level manually e.g. through bpf_csum_level() helper that is added in subsequent patch. The bpf_skb_proto_{4_to_6,6_to_4}() for NAT64/46 translation from the BPF bpf_skb_change_proto() helper uses bpf_skb_net_hdr_{push,pop}() pair internally as well but doesn't change layers, only transitions between v4 to v6 and vice versa, therefore no adoption is required there. [0] https://lore.kernel.org/bpf/20200424185556.7358-1-lmb@cloudflare.com/ Fixes: 2be7e212 ("bpf: add bpf_skb_adjust_room helper") Reported-by:
-
- 01 Jun, 2020 32 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-06-01 The following pull-request contains BPF updates for your *net-next* tree. We've added 55 non-merge commits during the last 1 day(s) which contain a total of 91 files changed, 4986 insertions(+), 463 deletions(-). The main changes are: 1) Add rx_queue_mapping to bpf_sock from Amritha. 2) Add BPF ring buffer, from Andrii. 3) Attach and run programs through devmap, from David. 4) Allow SO_BINDTODEVICE opt in bpf_setsockopt, from Ferenc. 5) link based flow_dissector, from Jakub. 6) Use tracing helpers for lsm programs, from Jiri. 7) Several sk_msg fixes and extensions, from John. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jules Irenge authored
Sparse reports a warning at efx_ef10_try_update_nic_stats_vf() warning: context imbalance in efx_ef10_try_update_nic_stats_vf() - unexpected unlock The root cause is the missing annotation at efx_ef10_try_update_nic_stats_vf() Add the missing _must_hold(&efx->stats_lock) annotation Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Signed-off-by:
-
Vinay Kumar Yadav authored
Extends support to IPv6 for Inline TLS server. Signed-off-by:
Vinay Kumar Yadav <vinay.yadav@chelsio.com> v1->v2: - cc'd tcp folks. v2->v3: - changed EXPORT_SYMBOL() to EXPORT_SYMBOL_GPL() Signed-off-by:
-
David S. Miller authored
Ayush Sawal says: ==================== Fixing compilation warnings and errors Patch 1: Fixes the warnings seen when compiling using sparse tool. Patch 2: Fixes a cocci check error introduced after commit 567be3a5 ("crypto: chelsio - Use multiple txq/rxq per tfm to process the requests"). V1->V2 patch1: Avoid type casting by using get_unaligned_be32() and put_unaligned_be16/32() functions. patch2: Modified subject of the patch. ==================== Signed-off-by:
-
Ayush Sawal authored
This fixes an error observed after running coccinile check. drivers/crypto/chelsio/chcr_algo.c:1462:5-8: Unneeded variable: "err". Return "0" on line 1480 This line is missed in the commit 567be3a5 ("crypto: chelsio - Use multiple txq/rxq per tfm to process the requests"). Fixes: 567be3a5 ("crypto: chelsio - Use multiple txq/rxq per tfm to process the requests"). V1->V2 -Modified subject. Signed-off-by:
Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by:
-
Ayush Sawal authored
This patch fixes the compilation warnings displayed by sparse tool for chcr driver. V1->V2 Avoid type casting by using get_unaligned_be32() and put_unaligned_be16/32() functions. The key which comes from stack is an u8 byte stream so we store it in an unsigned char array(ablkctx->key). The function get_aes_decrypt_key() is a used to calculate the reverse round key for decryption, for this operation the key has to be divided into 4 bytes, so to extract 4 bytes from an u8 byte stream and store it in an u32 variable, get_aligned_be32() is used. Similarly for copying back the key from u32 variable to the original u8 key stream, put_aligned_be32() is used. Signed-off-by:
-
Rohit Maheshwari authored
Error messages seen while building kernel with CONFIG_IPV6 disabled. Signed-off-by:
Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by:
-
Rohit Maheshwari authored
Current design enables ktls setting from start, which is not efficient. Now the feature will be enabled when user demands TLS offload on any interface. v1->v2: - taking ULD module refcount till any single connection exists. - taking rtnl_lock() before clearing tls_devops. v2->v3: - cxgb4 is now registering to tlsdev_ops. - module refcount inc/dec in chcr. - refcount is only for connections. - removed new code from cxgb_set_feature(). v3->v4: - fixed warning message. Signed-off-by:
-
Hangbin Liu authored
Socket option IPV6_ADDRFORM supports UDP/UDPLITE and TCP at present. Previously the checking logic looks like: if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE) do_some_check; else if (sk->sk_protocol != IPPROTO_TCP) break; After commit b6f61189 ("ipv6: restrict IPV6_ADDRFORM operation"), TCP was blocked as the logic changed to: if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE) do_some_check; else if (sk->sk_protocol == IPPROTO_TCP) do_some_check; break; else break; Then after commit 82c9ae44 ("ipv6: fix restrict IPV6_ADDRFORM operation") UDP/UDPLITE were blocked as the logic changed to: if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE) do_some_check; if (sk->sk_protocol == IPPROTO_TCP) do_some_check; if (sk->sk_protocol != IPPROTO_TCP) break; Fix it by using Eric's code and simply remove the break in TCP check, which looks like: if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE) do_some_check; else if (sk->sk_protocol == IPPROTO_TCP) do_some_check; else break; Fixes: 82c9ae44 ("ipv6: fix restrict IPV6_ADDRFORM operation") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
YueHaibing authored
tipc_sendstream() may send zero length packet, then tipc_msg_append() do not alloc skb, skb_peek_tail() will get NULL, msg_set_ack_required will trigger NULL pointer dereference. Reported-by: syzbot+8eac6d030e7807c21d32@syzkaller.appspotmail.com Fixes: 0a3e060f ("tipc: add test for Nagle algorithm effectiveness") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Alexei Starovoitov authored
Jakub Sitnicki says: ==================== One of the pieces of feedback from recent review of BPF hooks for socket lookup [0] was that new program types should use bpf_link-based attachment. This series introduces new bpf_link type for attaching to network namespace. All link operations are supported. Errors returned from ops follow cgroup example. Patch 4 description goes into error semantics. The major change in v2 is a switch away from RCU to mutex-only synchronization. Andrii pointed out that it is not needed, and it makes sense to keep locking straightforward. Also, there were a couple of bugs in update_prog and fill_info initial implementation, one picked up by kbuild. Those are now fixed. Tests have been extended to cover them. Full changelog below. Series is organized as so: Patches 1-3 prepare a space in struct net to keep state for attached BPF programs, and massage the code in flow_dissector to make it attach type agnostic, to finally move it under kernel/bpf/. Patch 4, the most important one, introduces new bpf_link link type for attaching to network namespace. Patch 5 unifies the update error (ENOLINK) between BPF cgroup and netns. Patches 6-8 make libbpf and bpftool aware of the new link type. Patches 9-12 Add and extend tests to check that link low- and high-level API for operating on links to netns works as intended. Thanks to Alexei, Andrii, Lorenz, Marek, and Stanislav for feedback. -jkbs [0] https://lore.kernel.org/bpf/20200511185218.1422406-1-jakub@cloudflare.com/ Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Lorenz Bauer <lmb@cloudflare.com> Cc: Marek Majkowski <marek@cloudflare.com> Cc: Stanislav Fomichev <sdf@google.com> v1 -> v2: - Switch to mutex-only synchronization. Don't rely on RCU grace period guarantee when accessing struct net from link release / update / fill_info, and when accessing bpf_link from pernet pre_exit callback. (Andrii) - Drop patch 1, no longer needed with mutex-only synchronization. - Don't leak uninitialized variable contents from fill_info callback when link is in defunct state. (kbuild) - Make fill_info treat the link as defunct (i.e. no attached netns) when struct net refcount is 0, but link has not been yet auto-detached. - Add missing BPF_LINK_TYPE define in bpf_types.h for new link type. - Fix link update_prog callback to update the prog that will run, and not just the link itself. - Return EEXIST on prog attach when link already exists, and on link create when prog is already attached directly. (Andrii) - Return EINVAL on prog detach when link is attached. (Andrii) - Fold __netns_bpf_link_attach into its only caller. (Stanislav) - Get rid of a wrapper around container_of() (Andrii) - Use rcu_dereference_protected instead of rcu_access_pointer on update-side. (Stanislav) - Make return-on-success from netns_bpf_link_create less confusing. (Andrii) - Adapt bpf_link for cgroup to return ENOLINK when updating a defunct link. (Andrii, Alexei) - Order new exported symbols in libbpf.map alphabetically (Andrii) - Keep libbpf's "failed to attach link" warning message clear as to what we failed to attach to (cgroup vs netns). (Andrii) - Extract helpers for printing link attach type. (bpftool, Andrii) - Switch flow_dissector tests to BPF skeleton and extend them to exercise link-based flow dissector attachment. (Andrii) - Harden flow dissector attachment tests with prog query checks after prog attach/detach, or link create/update/close. - Extend flow dissector tests to cover fill_info for defunct links. - Rebase onto recent bpf-next ==================== Signed-off-by:
-
Jakub Sitnicki authored
Extend the existing flow_dissector test case to run tests once using direct prog attachments, and then for the second time using indirect attachment via link. The intention is to exercises the newly added high-level API for attaching programs to network namespace with links (bpf_program__attach_netns). Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
-
Jakub Sitnicki authored
Switch flow dissector test setup from custom BPF object loader to BPF skeleton to save boilerplate and prepare for testing higher-level API for attaching flow dissector with bpf_link. To avoid depending on program order in the BPF object when populating the flow dissector PROG_ARRAY map, change the program section names to contain the program index into the map. This follows the example set by tailcall tests. Signed-off-by:
-
Jakub Sitnicki authored
test_flow_dissector leaves a TAP device after it's finished, potentially interfering with other tests that will run after it. Fix it by closing the TAP descriptor on cleanup. Fixes: 0905beec ("selftests/bpf: run flow dissector tests in skb-less mode") Signed-off-by:
-
Jakub Sitnicki authored
Extend the existing test case for flow dissector attaching to cover: - link creation, - link updates, - link info querying, - mixing links with direct prog attachment. Signed-off-by:
-
Jakub Sitnicki authored
Make `bpf link show` aware of new link type, that is links attached to netns. When listing netns-attached links, display netns inode number as its identifier and link attach type. Sample session: # readlink /proc/self/ns/net net:[4026532251] # bpftool prog show 357: flow_dissector tag a04f5eef06a7f555 gpl loaded_at 2020-05-30T16:53:51+0200 uid 0 xlated 16B jited 37B memlock 4096B 358: flow_dissector tag a04f5eef06a7f555 gpl loaded_at 2020-05-30T16:53:51+0200 uid 0 xlated 16B jited 37B memlock 4096B # bpftool link show 108: netns prog 357 netns_ino 4026532251 attach_type flow_dissector # bpftool link -jp show [{ "id": 108, "type": "netns", "prog_id": 357, "netns_ino": 4026532251, "attach_type": "flow_dissector" } ] (... after netns is gone ...) # bpftool link show 108: netns prog 357 netns_ino 0 attach_type flow_dissector # bpftool link -jp show [{ "id": 108, "type": "netns", "prog_id": 357, "netns_ino": 0, "attach_type": "flow_dissector" } ] Signed-off-by: -
Jakub Sitnicki authored
Code for printing link attach_type is duplicated in a couple of places, and likely will be duplicated for future link types as well. Create helpers to prevent duplication. Suggested-by:
-
Jakub Sitnicki authored
Add bpf_program__attach_nets(), which uses LINK_CREATE subcommand to create an FD-based kernel bpf_link, for attach types tied to network namespace, that is BPF_FLOW_DISSECTOR for the moment. Signed-off-by:
-
Jakub Sitnicki authored
Failure to update a bpf_link because it has been auto-detached by a dying cgroup currently results in EINVAL error, even though the arguments passed to bpf() syscall are not wrong. bpf_links attaching to netns in this case will return ENOLINK, which carries the message that the link is no longer attached to anything. Change cgroup bpf_links to do the same to keep the uAPI errors consistent. Fixes: 0c991ebc ("bpf: Implement bpf_prog replacement for an active bpf_cgroup_link") Suggested-by:
-
Jakub Sitnicki authored
Extend bpf() syscall subcommands that operate on bpf_link, that is LINK_CREATE, LINK_UPDATE, OBJ_GET_INFO, to accept attach types tied to network namespaces (only flow dissector at the moment). Link-based and prog-based attachment can be used interchangeably, but only one can exist at a time. Attempts to attach a link when a prog is already attached directly, and the other way around, will be met with -EEXIST. Attempts to detach a program when link exists result in -EINVAL. Attachment of multiple links of same attach type to one netns is not supported with the intention to lift the restriction when a use-case presents itself. Because of that link create returns -E2BIG when trying to create another netns link, when one already exists. Link-based attachments to netns don't keep a netns alive by holding a ref to it. Instead links get auto-detached from netns when the latter is being destroyed, using a pernet pre_exit callback. When auto-detached, link lives in defunct state as long there are open FDs for it. -ENOLINK is returned if a user tries to update a defunct link. Because bpf_link to netns doesn't hold a ref to struct net, special care is taken when releasing, updating, or filling link info. The netns might be getting torn down when any of these link operations are in progress. That is why auto-detach and update/release/fill_info are synchronized by the same mutex. Also, link ops have to always check if auto-detach has not happened yet and if netns is still alive (refcnt > 0). Signed-off-by:
-
Jakub Sitnicki authored
Move functions to manage BPF programs attached to netns that are not specific to flow dissector to a dedicated module named bpf/net_namespace.c. The set of functions will grow with the addition of bpf_link support for netns attached programs. This patch prepares ground by creating a place for it. This is a code move with no functional changes intended. Signed-off-by:
-
Jakub Sitnicki authored
In order to: (1) attach more than one BPF program type to netns, or (2) support attaching BPF programs to netns with bpf_link, or (3) support multi-prog attach points for netns we will need to keep more state per netns than a single pointer like we have now for BPF flow dissector program. Prepare for the above by extracting netns_bpf that is part of struct net, for storing all state related to BPF programs attached to netns. Turn flow dissector callbacks for querying/attaching/detaching a program into generic ones that operate on netns_bpf. Next patch will move the generic callbacks into their own module. This is similar to how it is organized for cgroup with cgroup_bpf. Signed-off-by:
-
Jakub Sitnicki authored
Split out the part of attach callback that happens with attach/detach lock acquired. This structures the prog attach callback in a way that opens up doors for moving the locking out of flow_dissector and into generic callbacks for attaching/detaching progs to netns in subsequent patches. Signed-off-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20200531082846.2117903-2-jakub@cloudflare.com
-
Andrii Nakryiko authored
On systems with recent enough glibc, reallocarray compat won't kick in, so reallocarray() itself has to come from stdlib.h include. But _GNU_SOURCE is necessary to enable it. So add it. Fixes: bf99c936 ("libbpf: Add BPF ring buffer support") Signed-off-by:
-
Jiri Olsa authored
Currenty lsm uses bpf_tracing_func_proto helpers which do not include stack trace or perf event output. It's useful to have those for bpftrace lsm support [1]. Using tracing_prog_func_proto helpers for lsm programs. [1] https://github.com/iovisor/bpftrace/pull/1347Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
In order to use standard 'xdp' prefix, rename convert_to_xdp_frame utility routine in xdp_convert_buff_to_frame and replace all the occurrences Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/6344f739be0d1a08ab2b9607584c4d5478c8c083.1590698295.git.lorenzo@kernel.org
-
Lorenzo Bianconi authored
Introduce xdp_convert_frame_to_buff utility routine to initialize xdp_buff fields from xdp_frames ones. Rely on xdp_convert_frame_to_buff in veth xdp code. Suggested-by:
-
Alexei Starovoitov authored
Ferenc Fejes says: ==================== This option makes it possible to programatically bind sockets to netdevices. With the help of this option sockets of VRF unaware applications could be distributed between multiple VRFs with an eBPF program. This lets the applications benefit from multiple possible routes. v2: - splitting up the patch to three parts - lock_sk parameter for optional locking in sock_bindtoindex - Stanislav Fomichev - testing the SO_BINDTODEVICE option - Andrii Nakryiko ==================== Signed-off-by: -
Ferenc Fejes authored
This test intended to verify if SO_BINDTODEVICE option works in bpf_setsockopt. Because we already in the SOL_SOCKET level in this connect bpf prog its safe to verify the sanity in the beginning of the connect_v4_prog by calling the bind_to_device test helper. The testing environment already created by the test_sock_addr.sh script so this test assume that two netdevices already existing in the system: veth pair with names test_sock_addr1 and test_sock_addr2. The test will try to bind the socket to those devices first. Then the test assume there are no netdevice with "nonexistent_dev" name so the bpf_setsockopt will give use ENODEV error. At the end the test remove the device binding from the socket by binding it to an empty name. Signed-off-by:
Ferenc Fejes <fejes@inf.elte.hu> Signed-off-by:
-
Ferenc Fejes authored
Extending the supported sockopts in bpf_setsockopt with SO_BINDTODEVICE. We call sock_bindtoindex with parameter lock_sk = false in this context because we already owning the socket. Signed-off-by:
-
Ferenc Fejes authored
The sock_bindtoindex intended for kernel wide usage however it will lock the socket regardless of the context. This modification relax this behavior optionally: locking the socket will be optional by calling the sock_bindtoindex with lock_sk = true. The modification applied to all users of the sock_bindtoindex. Signed-off-by:
-
Denis Efremov authored
buf_prevkey in generic_map_lookup_batch() is allocated with kmalloc(). It's safe to free it with kfree(). Fixes: cb4d03ab ("bpf: Add generic support for lookup batch op") Signed-off-by:
Denis Efremov <efremov@linux.com> Signed-off-by:
-
