We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_unregister_framedone_handler() to accept 'enum
omap_channel' instead of 'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_register_framedone_handler() to accept 'enum
omap_channel' instead of 'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_start_update() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_disable() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_enable() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_set_lcd_config() to accept 'enum omap_channel' instead
of 'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_set_timings() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_disconnect() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_connect() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Use 'out->dispc_channel_connected' to check if the device is connected
to an overlay manager or not, instead of using 'out->manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We want to remove the 'struct omap_overlay_manager' from
omap_dss_device. At the moment that field is used, among some other
uses, to see if the omap_dss_device is connected to an overlay manager.

To make it possible to remove the 'struct omap_overlay_manager' field,
this patch adds 'bool dispc_channel_connected' field to track the
connected-or-not status.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing the use of 'struct omap_overlay_manager' from omapdrm.
This patch changes the function pointers in 'dss_mgr_ops' to get 'enum
omap_channel' parameter instead of 'struct omap_overlay_manager'.

The change is very straightforward, as we still use 'struct
omap_overlay_manager' inside the function implementations where needed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

In order to remove uses of 'struct omap_overlay_manager' we need to get
rid of using omapdss_find_mgr_from_display() when initializing omapdrm.

Instead of using omapdss_find_mgr_from_display() and mgr->id to find the
dispc channel used for the given display, we can instead use
omapdss_find_output_from_display(), and get the output->dispc_channel
from there.

We can also remove omapdss_find_mgr_from_display() as it's no longer
used.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

In order to remove uses of 'struct omap_overlay_manager' from omapdrm,
this patch removes the crtc->mgr field.

To accomplish that, a new static array is added along the current
'omap_crtcs' static array, which is used to store the output device
connected to a crtc.

Optimally we'd use the struct omap_crtc to store this information, but
at the time when omap_crtc_dss_connect() is called, we don't yet have
the omap_crtc instances. This might possibly be fixed later, but for now
the static array does the job.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing the use of the 'struct omap_overlay_manager' from
omapdrm, and one part of that is removing the use of
mgr->supported_outputs field.

This patch adds dispc_mgr_get_supported_outputs() function which can be
used instead of mgr->supported_outputs. omap_crtc.c is changed to use
the new function.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

This patch continues the work to create private versions of the
omapdss.h header for omapdrm and omapfb. This one moves the dss_mgr_*
function declarations.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

This patch continues the work to create private versions of the
omapdss.h header for omapdrm and omapfb. This one moves 'struct dss_mgr_ops'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

omapdrm and omapfb still share the same include/video/omapdss.h. We need
to change that so that we can proceed with omapdrm work.

However, it's not trivial to make separate omapfb and omapdrm versions
of omapdss.h, as that file is also included in other places like arch
code, audio code and omap_vout code. So we'll do it piece by piece.

This patch makes private versions of all the dispc function declarations
that are in omapdss.h. For omapdrm we create a new file,
drivers/gpu/drm/omapdrm/dss/omapdss.h, which will contain headers meant
to be visible outside omapdss.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We no longer have any boards that require the platform data support from
the panel, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We no longer have any boards that require the platform data support from
the panel, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We no longer have any boards that require the platform data support from
the panel, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We no longer have any boards that require the platform data support from
the panel, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We no longer have any boards that require the platform data support from
the panel, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We no longer have any boards that require the platform data support from
the connector, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We no longer have any boards that require the platform data support from
the connector, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We no longer have any boards that require the platform data support from
the encoder, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We no longer have any boards that require the platform data support from
the panel, so we can remove the related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

omap_hdmi_init() function does not exist anymore, so we can remove the
declaration.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

'struct omap_dss_hdmi_data' is not used anywhere, so we can remove it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

core.c is the only caller of dss_disable_all_devices(). We can thus move
the function from display.c to core.c and make it static.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

For legacy reasons omapdss handles system suspend/resume via PM notifier
callback, where the driver disables/resumes all the outputs.

This doesn't work well with omapdrm. What happens on suspend is that the
omapdss disables the displays while omapdrm is still happily continuing
its work, possibly waiting for an vsync irq, which will never come if
the display output is disabled, leading to timeouts and errors sent to
userspace.

This patch moves the suspend/resume handling to omapdrm, and the
suspend/resume is now done safely inside modeset lock.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

omapdrm is missing a check on the validity of the rotation property.
This leads to omapdrm possibly trying to use rotation on non-rotateable
framebuffer, which causes the overlay setup to fail.

This patch adds the necessary check to omap_plane_atomic_check().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Before universal planes we had to have plane specific properties for the
crtc too, as on the hardware level a crtc uses a plane. In other words,
e.g. 'zorder' property was added to both planes and crtcs, and
omap_crtc.c would delegate the property set/get to the primary plane.

However, the delegation was a bit too generic, delegating all property
set/get calls to planes. Thus it's possible to set, say, FB_ID, on a
crtc, which gets redirected to  the primary plane.

This is not standard, and shouldn't be allowed. To keep backward
compatibility, we still need to redirect the properties we supported
earlier for crtcs, namely 'zorder' and 'rotation'.

This patch redirects only the allowed properties from crtcs to planes.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Subsequent threads returning EBUSY from vm_insert_pfn() was not
handled correctly. As a result concurrent access from new threads
to mmapped data caused SIGBUS.

See e79e0fe3 ("drm/i915: EBUSY status
handling added to i915_gem_fault()").
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The DSS hardware uses the same ROW_INC value for both Y and UV planes
for NV12 format. This means that the pitches of the Y and UV planes have
to match. omapdrm doesn't check this at the moment, and this can lead
into a broken NV12 fb on the screen.

This patch adds the check.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

DISPC requires the x resolution to be divisible by 8 when stall mode is
not used.

Add a check to the DPI driver to verify this.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Now that interlace support has been added, we can remove the check that
prevents interlace.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Add the missing bits for interlace:

* Set VBLANK_OSC if the videomode's vblank is fractional
* Halve the vertical timings for interlace
* Double the horizontal timings for double-pixel mode
* Set FC_PRCONF properly for double-pixel mode
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The HDMI driver copies the timing values one by one. Instead we can just
copy the whole struct.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

For some reason the HDMI FC's HSW value is programmed to hsw-1. There's
no indication in the documentation that this would be correct, and no
other blanking value needs -1 either.

So remove the -1.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>