- 07 Aug, 2004 31 commits
-
-
Dave Hansen authored
This somehow ended up out in the global Kconfig menu. Move it back inside debugging where it belongs. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Anton Blanchard authored
Some new sysfs macros declare a store_purr() function that never gets used, which makes a compiler warning happen. Suppress the warning with the used attribute. Signed-off-by:
Dave Hansen <haveblue@us.ibm.com> Signed-off-by:
-
Anton Blanchard authored
Due to a mismerge, some code in chrp_progress appears twice. While here, clean up some formatting issues. Signed-off-by:
-
Anton Blanchard authored
We need to set the thread priority to medium when entering all exceptions. We may have been executing in low priority (eg the idle loop), but definitely do not want to remain in that priority for the duration of the exception (eg a device interrupt). Signed-off-by:
-
Anton Blanchard authored
Due to speculative execution, a CPU may execute some instructions after the rfid. This makes profiles confusing, since profiling ticks could end up in those instructions following the rfid that are never executed. Add a branch to self after each rfid to avoid this. Signed-off-by:
-
Anton Blanchard authored
Print the correct domain when a PCI resource allocation fails. Signed-off-by:
-
Anton Blanchard authored
- Remove unused includes. - Be consistent about printing irq numbers, avoid a mix of decimal and hexadecimal. - Remove prototypes from xics.c, they should be in xics.h. - Remove infinite loop on failure, and instead use panic. Panic has a chance to log the error message on the LED panel and reboot the box, a while(1) loop does not. - xics isnt compiled for iseries any more, so no need for the CONFIG_PPC_PSERIES hack. Signed-off-by:
-
John Engel authored
Here's a fix for the 32-bit PTRACE_GETEVENTMSG ptrace call that handles the passing of a 32-bit user address. Please apply, thanks. Signed-off-by:
John Engel <jhe@us.ibm.com> Signed-off-by:
-
Paul Mackerras authored
This patch just cleans up arch/ppc64/kernel/pci_dn.c a bit, including: - remove it from the iSeries build completely - small changes to Makefile - remove the "post" parameter from traverse_pci_devices as noone used it - make traverse_all_pci_devices static - remove CONFIG_PPC_PSERIES tests as we no longer build for iSeries - some reformatting (closer to "standard") - remove some of pointer casts This has been built (with default config) on pSeries and pmac and built and run on iSeries. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Andrey Panin authored
Fix ppc64 free_irq. Signed-off-by:
-
Thomas Spatzier authored
qeth network driver performance improvements. The ping time on the HiperSockets interface drops from 250 usecs to 50 usecs and the 1 bytes request/response test improves from 70000 to 110000 transactions. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Andreas Herrmann <aherrman@de.ibm.com> zfcp host adapater change: - Fix call to close_physical_port to prevent devices going offline after error recovery. - Fix return value of sysfs port_remove attribute store function. - Replace reboot notifier with device driver shutdown function. Signed-off-by:
-
Peter Tiedemann authored
Prefix debug feature variables with ctc to avoid name space problems. Signed-off-by:
-
Nishanth Aravamudan authored
Use msleep() instead of schedule_timeout() to guarantee the task delays for the desired time. Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
-
Cornelia Huck authored
common i/o layer changes: - Set state of a disconnected device to offline before calling ccw_device_online, otherwise the device doesn't come up again. - Check for channel end when trying to find out if basic sense was successful. - Fix error handling in new_channel_path. Signed-off-by:
-
Martin Schwidefsky authored
From: Martin Schwidefsky <schwidefsky@de.ibm.com> s390 core changes: - Add 32 bit compat code for ptrace requests PTRACE_GETEVENTMSG, PTRACE_GETSIGINFO and PTRACE_SETSIGINFO. - Make non-smp kernel compile. - Regenerate default configuration. Signed-off-by:
-
William Lee Irwin III authored
From: Art Haas <ahaas@airmail.net> The 1.3->1.4 changes to the arch/sparc/lib/copy_user.S file added parenthesis to a number of macros within that file. The BK changlog associated with this change indicate the change was to make the file work with gcc-3.3. When looking at the changes made, I see that similar macros exist in memcpy.S as well, so would a patch adding parens to that file be worthwhile? Also, just what was the problem with gcc-3.3 that was resolved by adding the parenthesis? Macro mis-expansion I'm guessing. Signed-off-by:
Art Haas <ahaas@airmail.net> Signed-off-by:
William Irwin <wli@holomorphy.com> Signed-off-by:
-
William Lee Irwin III authored
SMP support is in need of a great deal of work to port it from 2.2 and 2.4. Add a dependency on BROKEN in the Kconfig to warn the unwary. Signed-off-by:
-
William Lee Irwin III authored
The sun4 port does not support SMP. Disable it via Kconfig. Signed-off-by:
-
William Lee Irwin III authored
This variable is unused and causes noisy compiles. Signed-off-by:
-
William Lee Irwin III authored
cache_decay_ticks needs to be defined in order for the kernel to link. This placeholder is inaccurate, however, other, more grave SMP issues need to be addressed first. Signed-off-by:
-
William Lee Irwin III authored
Remove leftover references to now-unused start_secondary() Signed-off-by:
-
William Lee Irwin III authored
smp_reschedule_irq() mysteriously vanished sometime after 2.4. This patch reinstates it so that the kernel will link properly and so cpus will set TIF_NEED_RESCHED when it's asked of them. Signed-off-by:
-
William Lee Irwin III authored
The SMP initialization functions try to do btfixups on the wrong symbols for smp_processor_id(), which is now implemented in terms of current_thread_info()->cpu. hard_smp_processor_id() etc. are now in use where smp_processor_id() was once used. Signed-off-by:
-
William Lee Irwin III authored
cpu_present_map is a cpumask_t. Sweep arch/sparc/kernel/sun4d_smp.c so that it is treated as such. Signed-off-by:
-
William Lee Irwin III authored
An analysis of the code determined that AP initialization called init_idle() no less than three times, 2 out of the three with incorrect numbers of arguments. This patch removes the superfluous calls. Signed-off-by:
-
William Lee Irwin III authored
FLUSH_BEGIN() is a nop at the moment, so the mm variable for its argument trips a warning. Pass vma->vm_mm directly instead. Signed-off-by:
-
Andrew Morton authored
Fix a race identified by Chris Mason <mason@suse.com> journal_unmap_buffer -> __dispose_buffers has the j_list_lock and the jbd_lock_bh_state held. journal_get_write_access calls journal_put_journal_head, which takes jbd_lock_bh_journal_head(bh) and doesn't seem to have any other locks held. Since journal_unmap_buffers trusts the buffer_jbd bit to see if we need to call __dispose_buffer, and nobody seems to test buffer_jbd after taking jbd_lock_bh_journal_head. The kernel dereferences a null jh pointer in __journal_remove_journal_head. The patch fixes this by using journal_grab_journal_head() in journal_unmap_buffer(). It ensures that we either grab and pin the journal_head if the bh has one, or we bale out if the bh doesn't have a journal_head. Signed-off-by:
-
Paul Mackerras authored
Karsten Keil's patch entitled "[ISDN]: Fix kernel PPP/IPPP active/passiv filter code" that went in back in April was an attempt to solve a real problem - namely that the libpcap maintainers have removed useful functionality that pppd was using - but his fix broke existing pppd binaries and IMO didn't end up actually solving the problem. This patch reverts the change to ppp_generic.c so that existing pppd binaries work again. I am going to have to work out a proper fix, which may involve further changes to ppp_generic.c, but I will make sure existing pppd binaries still work. Signed-off-by:
-
Sam Ravnborg authored
In the top-level Makefile a number of locale related environment variables were preset to give a small speed up when building the kernel. Unfortunately this had the bad sideeffect that the variable CFLAGS_vmlinux.lds.o lost the exported vaule in some setups (obviously not mine). This smells like a make issue - but the best solution is simply to drop presetting the locale related variables. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Linus Torvalds authored
We use a FMODE_LSEEK flag to match the existing read/write bits. This allows us to check for seekability on a VFS level for lseek/pread/pwrite, and cleans things up. Update some sites that used the numeric constants to use the symbolic values instead.
-
- 06 Aug, 2004 9 commits
-
-
bk://bk.arm.linux.org.uk/linux-2.6-serialLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Russell King authored
Patch from: Nishanth Aravamudan Use msleep() instead of schedule_timeout() to guarantee the task delays for the desired time. Signed-off-by: Nishanth Aravamudan Signed-off-by: Russell King
-
bk://bk.arm.linux.org.uk/linux-2.6-rmkLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Russell King authored
We're only 32-bit ARMs, so testing this symbol in 32-bit only code is unnecessary.
-
Russell King authored
Patch from: Nishanth Aravamudan Use msleep() instead of schedule_timeout() to guarantee the task delays for the desired time. Signed-off-by: Nishanth Aravamudan Signed-off-by: Russell King
-
Ben Dooks authored
Patch from Ben Dooks Fixed mis-spelled time initialisation calls and a bad prototype in the time header Fixes for patch 1962/1
-
Ben Dooks authored
Patch from Ben Dooks Rename to Thorcom, and added extra lines to help
-
Ben Dooks authored
Patch from Ben Dooks Updated default configuration file to include all the boards possible with this architecture
-
Kevin Hilman authored
Patch from Kevin Hilman The following patch allows the bootpImage to be loaded and executed from a non-zero address. On OMAP platforms for example, the physical address for SDRAM is 0x10000000 and not zero.
-
