- 09 Dec, 2015 5 commits
-
-
Phil Reid authored
[ Upstream commit e6dbe1eb ] priv->hwts_*_en indicate if timestamping is enabled/disabled at run time. But priv->dma_cap.time_stamp and priv->dma_cap.atime_stamp indicates HW is support for PTPv1/PTPv2. Signed-off-by:
Phil Reid <preid@electromag.com.au> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Carol L Soto authored
[ Upstream commit c02b0501 ] When doing memcpy/memset of EQEs, we should use sizeof struct mlx4_eqe as the base size and not caps.eqe_size which could be bigger. If caps.eqe_size is bigger than the struct mlx4_eqe then we corrupt data in the master context. When using a 64 byte stride, the memcpy copied over 63 bytes to the slave_eq structure. This resulted in copying over the entire eqe of interest, including its ownership bit -- and also 31 bytes of garbage into the next WQE in the slave EQ -- which did NOT include the ownership bit (and therefore had no impact). However, once the stride is increased to 128, we are overwriting the ownership bits of *three* eqes in the slave_eq struct. This results in an incorrect ownership bit for those eqes, which causes the eq to seem to be full. The issue therefore surfaced only once 128-byte EQEs started being used in SRIOV and (overarchitectures that have 128/256 byte cache-lines such as PPC) - e.g after commit 77507aa2 "net/mlx4_core: Enable CQE/EQE stride support". Fixes: 08ff3235 ('mlx4: 64-byte CQE/EQE support') Signed-off-by:
Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Sowmini Varadhan authored
[ Upstream commit 8ce675ff ] Either of pskb_pull() or pskb_trim() may fail under low memory conditions. If rds_tcp_data_recv() ignores such failures, the application will receive corrupted data because the skb has not been correctly carved to the RDS datagram size. Avoid this by handling pskb_pull/pskb_trim failure in the same manner as the skb_clone failure: bail out of rds_tcp_data_recv(), and retry via the deferred call to rds_send_worker() that gets set up on ENOMEM from rds_tcp_read_sock() Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 1acea4f6 ] We can't rely on PPPOX_ZOMBIE to decide whether to clear po->pppoe_dev. PPPOX_ZOMBIE can be set by pppoe_disc_rcv() even when po->pppoe_dev is NULL. So we have no guarantee that (sk->sk_state & PPPOX_ZOMBIE) implies (po->pppoe_dev != NULL). Since we're releasing a PPPoE socket, we want to release the pppoe_dev if it exists and reset sk_state to PPPOX_DEAD, no matter the previous value of sk_state. So we can just check for po->pppoe_dev and avoid any assumption on sk->sk_state. Fixes: 2b018d57 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 50010c20 ] This is decrementing the pointer, instead of the value stored in the pointer. KASan detects it as an out of bounds reference. Reported-by:
"Berry Cheng 程君(成淼)" <chengmiao.cj@alibaba-inc.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 09 Nov, 2015 24 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
Fixes the backport of 0b34a166 upstream Commit 0b34a166 "x86/xen: Support kexec/kdump in HVM guests by doing a soft reset" has been added to the 4.2-stable tree" needed to correct the CONFIG variable, as CONFIG_KEXEC_CORE only showed up in 4.3. Reported-by:
David Vrabel <david.vrabel@citrix.com> Reported-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
Doron Tsur authored
commit 0ca81a28 upstream. ib_send_cm_sidr_rep could sometimes erase the node from the sidr (depending on errors in the process). Since ib_send_cm_sidr_rep is called both from cm_sidr_req_handler and cm_destroy_id, cm_id_priv could be either erased from the rb_tree twice or not erased at all. Fixing that by making sure it's erased only once before freeing cm_id_priv. Fixes: a977049d ('[PATCH] IB: Add the kernel CM implementation') Signed-off-by:
Doron Tsur <doront@mellanox.com> Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Dāvis Mosāns authored
commit 22805217 upstream. When pci_pool_alloc fails in mvs_task_prep then task->lldd_task stays NULL but it's later used in mvs_abort_task as slot which is passed to mvs_slot_task_free causing NULL pointer dereference. Just return from mvs_slot_task_free when passed with NULL slot. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101891Signed-off-by:
Dāvis Mosāns <davispuh@gmail.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Jes Sorensen authored
commit 681ab469 upstream. This was introduced with 9e882242 which changed the return value of submit_bio_wait() to return != 0 on error, but didn't update the caller accordingly. Fixes: 9e882242 ("block: Add submit_bio_wait(), remove from md") Reported-by:
Bill Kuzeja <William.Kuzeja@stratus.com> Signed-off-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
Jes Sorensen authored
commit 203d27b0 upstream. This was introduced with 9e882242 which changed the return value of submit_bio_wait() to return != 0 on error, but didn't update the caller accordingly. Fixes: 9e882242 ("block: Add submit_bio_wait(), remove from md") Reported-by:
-
Herbert Xu authored
commit 3fc89adb upstream. Currently a number of Crypto API operations may fail when a signal occurs. This causes nasty problems as the caller of those operations are often not in a good position to restart the operation. In fact there is currently no need for those operations to be interrupted by user signals at all. All we need is for them to be killable. This patch replaces the relevant calls of signal_pending with fatal_signal_pending, and wait_for_completion_interruptible with wait_for_completion_killable, respectively. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Peter Zijlstra authored
commit 275d7d44 upstream. Poma (on the way to another bug) reported an assertion triggering: [<ffffffff81150529>] module_assert_mutex_or_preempt+0x49/0x90 [<ffffffff81150822>] __module_address+0x32/0x150 [<ffffffff81150956>] __module_text_address+0x16/0x70 [<ffffffff81150f19>] symbol_put_addr+0x29/0x40 [<ffffffffa04b77ad>] dvb_frontend_detach+0x7d/0x90 [dvb_core] Laura Abbott <labbott@redhat.com> produced a patch which lead us to inspect symbol_put_addr(). This function has a comment claiming it doesn't need to disable preemption around the module lookup because it holds a reference to the module it wants to find, which therefore cannot go away. This is wrong (and a false optimization too, preempt_disable() is really rather cheap, and I doubt any of this is on uber critical paths, otherwise it would've retained a pointer to the actual module anyway and avoided the second lookup). While its true that the module cannot go away while we hold a reference on it, the data structure we do the lookup in very much _CAN_ change while we do the lookup. Therefore fix the comment and add the required preempt_disable(). Reported-by:
poma <pomidorabelisima@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Fixes: a6e6abd5 ("module: remove module_text_address()") Signed-off-by:
-
Cathy Avery authored
commit a54c8f0f upstream. xen-blkfront will crash if the check to talk_to_blkback() in blkback_changed()(XenbusStateInitWait) returns an error. The driver data is freed and info is set to NULL. Later during the close process via talk_to_blkback's call to xenbus_dev_fatal() the null pointer is passed to and dereference in blkfront_closing. Signed-off-by:
Cathy Avery <cathy.avery@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Mathias Nyman authored
commit 3b4739b8 upstream. If a host fails to wake up a isochronous SuperSpeed device from U1/U2 in time for a isoch transfer it will generate a "No ping response error" Host will then move to the next transfer descriptor. Handle this case in the same way as missed service errors, tag the current TD as skipped and handle it on the next transfer event. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mike Snitzer authored
commit 4dcb8b57 upstream. btree_split_beneath()'s error path had an outstanding FIXME that speaks directly to the potential for _not_ cleaning up a previously allocated bufio-backed block. Fix this by releasing the previously allocated bufio block using unlock_block(). Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Acked-by:
Joe Thornber <thornber@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 2871c69e upstream. Commit 4c7e3093 ("dm btree remove: fix bug in redistribute3") wasn't a complete fix for redistribute3(). The redistribute3 function takes 3 btree nodes and shares out the entries evenly between them. If the three nodes in total contained (MAX_ENTRIES * 3) - 1 entries between them then this was erroneously getting rebalanced as (MAX_ENTRIES - 1) on the left and right, and (MAX_ENTRIES + 1) in the center. Fix this issue by being more careful about calculating the target number of entries for the left and right nodes. Unit tested in userspace using this program: https://github.com/jthornber/redistribute3-test/blob/master/redistribute3_t.cSigned-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Will Deacon authored
commit 9702970c upstream. This reverts commit e306dfd0. With this patch applied, we were the only architecture making this sort of adjustment to the PC calculation in the unwinder. This causes problems for ftrace, where the PC values are matched against the contents of the stack frames in the callchain and fail to match any records after the address adjustment. Whilst there has been some effort to change ftrace to workaround this, those patches are not yet ready for mainline and, since we're the odd architecture in this regard, let's just step in line with other architectures (like arch/arm/) for now. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Ilya Dryomov authored
commit 6d69bb53 upstream. Mapping an image with a long parent chain (e.g. image foo, whose parent is bar, whose parent is baz, etc) currently leads to a kernel stack overflow, due to the following recursion in the reply path: rbd_osd_req_callback() rbd_obj_request_complete() rbd_img_obj_callback() rbd_img_parent_read_callback() rbd_obj_request_complete() ... Limit the parent chain to 16 images, which is ~5K worth of stack. When the above recursion is eliminated, this limit can be lifted. Fixes: http://tracker.ceph.com/issues/12538Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Josh Durgin <jdurgin@redhat.com> [idryomov@gmail.com: backport to 3.10: rbd_dev->opts, context] Signed-off-by:
-
Ilya Dryomov authored
commit 1f2c6651 upstream. Currently we leak parent_spec and trigger a "parent reference underflow" warning if rbd_dev_create() in rbd_dev_probe_parent() fails. The problem is we take the !parent out_err branch and that only drops refcounts; parent_spec that would've been freed had we called rbd_dev_unparent() remains and triggers rbd_warn() in rbd_dev_parent_put() - at that point we have parent_spec != NULL and parent_ref == 0, so counter ends up being -1 after the decrement. Redo rbd_dev_probe_parent() to fix this. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Ronny Hegewald authored
commit bae818ee upstream. rbd requires stable pages, as it performs a crc of the page data before they are send to the OSDs. But since kernel 3.9 (patch 1d1d1a76 "mm: only enforce stable page writes if the backing device requires it") it is not assumed anymore that block devices require stable pages. This patch sets the necessary flag to get stable pages back for rbd. In a ceph installation that provides multiple ext4 formatted rbd devices "bad crc" messages appeared regularly (ca 1 message every 1-2 minutes on every OSD that provided the data for the rbd) in the OSD-logs before this patch. After this patch this messages are pretty much gone (only ca 1-2 / month / OSD). Signed-off-by:
Ronny Hegewald <Ronny.Hegewald@online.de> [idryomov@gmail.com: require stable pages only in crc case, changelog] [idryomov@gmail.com: backport to 3.9-3.17: context] Signed-off-by:
-
Ilia Mirkin authored
commit 2a6c521b upstream. On nv50+, we restrict the valid domains to just the one where the buffer was originally created. However after the buffer is evicted to system memory, we might move it back to a different domain that was not originally valid. When sharing the buffer and retrieving its GEM_INFO data, we still want the domain that will be valid for this buffer in a pushbuf, not the one where it currently happens to be. This resolves fdo#92504 and several others. These are due to suspend evicting all buffers, making it more likely that they temporarily end up in the wrong place. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92504Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Jan Kara authored
commit 296291cd upstream. Currently a simple program below issues a sendfile(2) system call which takes about 62 days to complete in my test KVM instance. int fd; off_t off = 0; fd = open("file", O_RDWR | O_TRUNC | O_SYNC | O_CREAT, 0644); ftruncate(fd, 2); lseek(fd, 0, SEEK_END); sendfile(fd, fd, &off, 0xfffffff); Now you should not ask kernel to do a stupid stuff like copying 256MB in 2-byte chunks and call fsync(2) after each chunk but if you do, sysadmin should have a way to stop you. We actually do have a check for fatal_signal_pending() in generic_perform_write() which triggers in this path however because we always succeed in writing something before the check is done, we return value > 0 from generic_perform_write() and thus the information about signal gets lost. Fix the problem by doing the signal check before writing anything. That way generic_perform_write() returns -EINTR, the error gets propagated up and the sendfile loop terminates early. Signed-off-by:
Jan Kara <jack@suse.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Charles Keepax authored
commit 97aff2c0 upstream. There are 24 EQ registers not 25, I suspect this bug came about because the registers start at EQ1 not zero. The bug is relatively harmless as the extra register written is an unused one. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Vasant Hegde authored
commit 8832317f upstream. Currently we do not validate rtas.entry before calling enter_rtas(). This leads to a kernel oops when user space calls rtas system call on a powernv platform (see below). This patch adds code to validate rtas.entry before making enter_rtas() call. Oops: Exception in kernel mode, sig: 4 [#1] SMP NR_CPUS=1024 NUMA PowerNV task: c000000004294b80 ti: c0000007e1a78000 task.ti: c0000007e1a78000 NIP: 0000000000000000 LR: 0000000000009c14 CTR: c000000000423140 REGS: c0000007e1a7b920 TRAP: 0e40 Not tainted (3.18.17-340.el7_1.pkvm3_1_0.2400.1.ppc64le) MSR: 1000000000081000 <HV,ME> CR: 00000000 XER: 00000000 CFAR: c000000000009c0c SOFTE: 0 NIP [0000000000000000] (null) LR [0000000000009c14] 0x9c14 Call Trace: [c0000007e1a7bba0] [c00000000041a7f4] avc_has_perm_noaudit+0x54/0x110 (unreliable) [c0000007e1a7bd80] [c00000000002ddc0] ppc_rtas+0x150/0x2d0 [c0000007e1a7be30] [c000000000009358] syscall_exit+0x0/0x98 Fixes: 55190f88 ("powerpc: Add skeleton PowerNV platform") Reported-by:
NAGESWARA R. SASTRY <nasastry@in.ibm.com> Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: Reword change log, trim oops, and add stable + fixes] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Joerg Roedel authored
commit cbf3ccd0 upstream. During device assignment/deassignment the flags in the DTE get lost, which might cause spurious faults, for example when the device tries to access the system management range. Fix this by not clearing the flags with the rest of the DTE. Reported-by:
G. Richard Bellamy <rbellamy@pteradigm.com> Tested-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Johannes Berg authored
commit 2cf5eb3a upstream. The code to send the RX PN data (for each TID) to the firmware has a devastating bug: it overwrites the data for TID 0 with all the TID data, leaving the remaining TIDs zeroed. This will allow replays to actually be accepted by the firmware, which could allow waking up the system. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Johannes Berg authored
commit 5bd16687 upstream. The code to send the RX PN data (for each TID) to the firmware has a devastating bug: it overwrites the data for TID 0 with all the TID data, leaving the remaining TIDs zeroed. This will allow replays to actually be accepted by the firmware, which could allow waking up the system. Signed-off-by:
-
Felix Fietkau authored
commit 029cd037 upstream. ath9k inserts padding between the 802.11 header and the data area (to align it). Since it didn't declare this extra required headroom, this led to some nasty issues like randomly dropped packets in some setups. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
- 27 Oct, 2015 11 commits
-
-
Greg Kroah-Hartman authored
-
Ilya Dryomov authored
commit 3ebe138a upstream. If rbd_dev_image_probe() in rbd_dev_probe_parent() fails, header_name is freed twice: once in rbd_dev_probe_parent() and then in its caller rbd_dev_image_probe() (rbd_dev_image_probe() is called recursively to handle parent images). rbd_dev_probe_parent() is responsible for probing the parent, so it shouldn't muck with clone's fields. Signed-off-by:
-
Mike Snitzer authored
commit ba30670f upstream. Fixes: ac8c3f3d ("dm thin: generate event when metadata threshold passed") Signed-off-by:
-
Shaohua Li authored
commit 874bbfe6 upstream. My system keeps crashing with below message. vmstat_update() schedules a delayed work in current cpu and expects the work runs in the cpu. schedule_delayed_work() is expected to make delayed work run in local cpu. The problem is timer can be migrated with NO_HZ. __queue_work() queues work in timer handler, which could run in a different cpu other than where the delayed work is scheduled. The end result is the delayed work runs in different cpu. The patch makes __queue_delayed_work records local cpu earlier. Where the timer runs doesn't change where the work runs with the change. [ 28.010131] ------------[ cut here ]------------ [ 28.010609] kernel BUG at ../mm/vmstat.c:1392! [ 28.011099] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN [ 28.011860] Modules linked in: [ 28.012245] CPU: 0 PID: 289 Comm: kworker/0:3 Tainted: G W4.3.0-rc3+ #634 [ 28.013065] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153802- 04/01/2014 [ 28.014160] Workqueue: events vmstat_update [ 28.014571] task: ffff880117682580 ti: ffff8800ba428000 task.ti: ffff8800ba428000 [ 28.015445] RIP: 0010:[<ffffffff8115f921>] [<ffffffff8115f921>]vmstat_update+0x31/0x80 [ 28.016282] RSP: 0018:ffff8800ba42fd80 EFLAGS: 00010297 [ 28.016812] RAX: 0000000000000000 RBX: ffff88011a858dc0 RCX:0000000000000000 [ 28.017585] RDX: ffff880117682580 RSI: ffffffff81f14d8c RDI:ffffffff81f4df8d [ 28.018366] RBP: ffff8800ba42fd90 R08: 0000000000000001 R09:0000000000000000 [ 28.019169] R10: 0000000000000000 R11: 0000000000000121 R12:ffff8800baa9f640 [ 28.019947] R13: ffff88011a81e340 R14: ffff88011a823700 R15:0000000000000000 [ 28.020071] FS: 0000000000000000(0000) GS:ffff88011a800000(0000)knlGS:0000000000000000 [ 28.020071] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 28.020071] CR2: 00007ff6144b01d0 CR3: 00000000b8e93000 CR4:00000000000006f0 [ 28.020071] Stack: [ 28.020071] ffff88011a858dc0 ffff8800baa9f640 ffff8800ba42fe00ffffffff8106bd88 [ 28.020071] ffffffff8106bd0b 0000000000000096 0000000000000000ffffffff82f9b1e8 [ 28.020071] ffffffff829f0b10 0000000000000000 ffffffff81f18460ffff88011a81e340 [ 28.020071] Call Trace: [ 28.020071] [<ffffffff8106bd88>] process_one_work+0x1c8/0x540 [ 28.020071] [<ffffffff8106bd0b>] ? process_one_work+0x14b/0x540 [ 28.020071] [<ffffffff8106c214>] worker_thread+0x114/0x460 [ 28.020071] [<ffffffff8106c100>] ? process_one_work+0x540/0x540 [ 28.020071] [<ffffffff81071bf8>] kthread+0xf8/0x110 [ 28.020071] [<ffffffff81071b00>] ?kthread_create_on_node+0x200/0x200 [ 28.020071] [<ffffffff81a6522f>] ret_from_fork+0x3f/0x70 [ 28.020071] [<ffffffff81071b00>] ?kthread_create_on_node+0x200/0x200 Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Wolfram Sang authored
commit 4f7effdd upstream. The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. While here, move drvdata, too. Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Russell King authored
commit 8996eafd upstream. Unlike shash algorithms, ahash drivers must implement export and import as their descriptors may contain hardware state and cannot be exported as is. Unfortunately some ahash drivers did not provide them and end up causing crashes with algif_hash. This patch adds a check to prevent these drivers from registering ahash algorithms until they are fixed. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Dave Kleikamp authored
commit a66d7f72 upstream. Some of the crypto algorithms write to the initialization vector, but no space has been allocated for it. This clobbers adjacent memory. Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit 631d8b67 upstream. When compiling a MMU kernel with CPU_HAS_ADDRESS_SPACES=n (e.g. "MMU=y allnoconfig": "echo CONFIG_MMU=y > allno.config && make KCONFIG_ALLCONFIG=1 allnoconfig"), we use plain "move" instead of "moves", and I got: CC arch/m68k/lib/uaccess.o {standard input}: Assembler messages: {standard input}:47: Error: operands mismatch -- statement `move.b %a0,(%a1)' ignored This happens because plain "move" doesn't support byte transfers between memory and address registers, while "moves" does. Fix the asm constraints for __generic_copy_from_user(), __generic_copy_to_user(), and __clear_user() to only use data registers when accessing userspace. Also, relax the asm constraints for 16-bit userspace accesses in __put_user() and __get_user(), as both "move" and "moves" do support such transfers between memory and address registers. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Charles Keepax authored
[ Upstream commit 436c2a50 ] commit 3cc81d85 ("asix: Don't reset PHY on if_up for ASIX 88772") causes the ethernet on Arndale to no longer function. This appears to be because the Arndale ethernet requires a full reset before it will function correctly, however simply reverting the above patch causes problems with ethtool settings getting reset. It seems the problem is that the ethernet is not properly reset during bind, and indeed the code in ax88772_bind that resets the device is a very small subset of the actual ax88772_reset function. This patch uses ax88772_reset in place of the existing reset code in ax88772_bind which removes some code duplication and fixes the ethernet on Arndale. It is still possible that the original patch causes some issues with suspend and resume but that seems like a separate issue and I haven't had a chance to test that yet. Signed-off-by:
Riku Voipio <riku.voipio@linaro.org> Signed-off-by:
-
Michel Stam authored
[ Upstream commit 3cc81d85 ] I've noticed every time the interface is set to 'up,', the kernel reports that the link speed is set to 100 Mbps/Full Duplex, even when ethtool is used to set autonegotiation to 'off', half duplex, 10 Mbps. It can be tested by: ifconfig eth0 down ethtool -s eth0 autoneg off speed 10 duplex half ifconfig eth0 up Then checking 'dmesg' for the link speed. Signed-off-by:
Michel Stam <m.stam@fugro.nl> Signed-off-by:
-
Joe Perches authored
[ Upstream commit 077cb37f ] It seems that kernel memory can leak into userspace by a kmalloc, ethtool_get_strings, then copy_to_user sequence. Avoid this by using kcalloc to zero fill the copied buffer. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
