- 02 Aug, 2013 3 commits
-
-
Michael S. Tsirkin authored
[ Upstream commit 4c7ab054 ] get user pages might fail partially in macvtap zero copy mode. To recover we need to put all pages that we got, but code used a wrong index resulting in double-free errors. Reported-by:
Brad Hubbard <bhubbard@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Gao feng authored
[ Upstream commit a881ae1f ] If we disable all of the net interfaces, and enable un-lo interface before lo interface, we already allocated the addrconf dst in ipv6_add_addr. So we shouldn't allocate it again when we enable lo interface. Otherwise the message below will be triggered. unregister_netdevice: waiting for sit1 to become free. Usage count = 1 This problem is introduced by commit 25fb6ca4 "net IPv6 : Fix broken IPv6 routing table after loopback down-up" Signed-off-by:
Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit 32de868c ] General Queries (the one with the Multicast Address field set to zero / '::') are supposed to have a Maximum Response Delay of [Query Response Interval], while for Multicast-Address-Specific Queries it is [Last Listener Query Interval] - not the other way round. (see RFC2710, section 7.3+7.8) Signed-off-by:
Linus Lüssing <linus.luessing@web.de> Signed-off-by:
-
- 27 Jul, 2013 37 commits
-
-
Ben Hutchings authored
-
Greg Kroah-Hartman authored
commit 7b175c46 upstream. This hopefully will help point developers to the proper way that patches should be submitted for inclusion in the stable kernel releases. Reported-by:
David Howells <dhowells@redhat.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Greg KH authored
commit 879a5a00 upstream. My email address has changed, the suse.de one is now dead, so update all of my MAINTAINER entries with the correct one so that patches don't get lost. Also change the status of some of my entries as I'm supposed to be doing this stuff now for real. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jan Kara authored
commit a60697f4 upstream. On 32-bit architectures with 32-bit sector_t computation of data offset in ext4_xattr_fiemap() can overflow resulting in reporting bogus data location. Fix the problem by typing block number to proper type before shifting. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jan Kara authored
commit 8af8eecc upstream. The arithmetics adding delalloc blocks to the number of used blocks in ext4_getattr() can easily overflow on 32-bit archs as we first multiply number of blocks by blocksize and then divide back by 512. Make the arithmetics more clever and also use proper type (unsigned long long instead of unsigned long). Signed-off-by:
-
Jonathan Salwan authored
commit 542db015 upstream. In drivers/cdrom/cdrom.c mmc_ioctl_cdrom_read_data() allocates a memory area with kmalloc in line 2885. 2885 cgc->buffer = kmalloc(blocksize, GFP_KERNEL); 2886 if (cgc->buffer == NULL) 2887 return -ENOMEM; In line 2908 we can find the copy_to_user function: 2908 if (!ret && copy_to_user(arg, cgc->buffer, blocksize)) The cgc->buffer is never cleaned and initialized before this function. If ret = 0 with the previous basic block, it's possible to display some memory bytes in kernel space from userspace. When we read a block from the disk it normally fills the ->buffer but if the drive is malfunctioning there is a chance that it would only be partially filled. The result is an leak information to userspace. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Liang Li authored
commit 384e301e upstream. When we use pch_uart as system console like 'console=ttyPCH0,115200', then 'send break' to it. We'll encounter the deadlock on a cpu/core, with interrupts disabled on the core. When we happen to have all irqs affinity to cpu0 then the deadlock on cpu0 actually deadlock whole system. In pch_uart_interrupt, we have spin_lock_irqsave(&priv->lock, flags) then call pch_uart_err_ir when break is received. Then the call to dev_err would actually call to pch_console_write then we'll run into another spin_lock(&priv->lock), with interrupts disabled. So in the call sequence lead by pch_uart_interrupt, we should be carefully to call functions that will 'print message to console' only in case the uart port is not being used as serial console. Signed-off-by:
Liang Li <liang.li@windriver.com> Signed-off-by:
-
Peter Zijlstra authored
commit 9bb5d40c upstream. Vince's fuzzer once again found holes. This time it spotted a leak in the locked page accounting. When an event had redirected output and its close() was the last reference to the buffer we didn't have a vm context to undo accounting. Change the code to destroy the buffer on the last munmap() and detach all redirected events at that time. This provides us the right context to undo the vm accounting. [Backporting for 3.4-stable. VM_RESERVED flag was replaced with pair 'VM_DONTEXPAND | VM_DONTDUMP' in 314e51b9 since 3.7.0-rc1, and 314e51b9 comes from a big patchset, we didn't backport the patchset, so I restored 'VM_DNOTEXPAND | VM_DONTDUMP' as before: - vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND | VM_DONTDUMP; + vma->vm_flags |= VM_DONTCOPY | VM_RESERVED; -- zliu] Reported-and-tested-by:
Vince Weaver <vincent.weaver@maine.edu> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130604084421.GI8923@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Zhouping Liu <zliu@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
commit 26cb63ad upstream. Vince reported a problem found by his perf specific trinity fuzzer. Al noticed 2 problems with perf's mmap(): - it has issues against fork() since we use vma->vm_mm for accounting. - it has an rb refcount leak on double mmap(). We fix the issues against fork() by using VM_DONTCOPY; I don't think there's code out there that uses this; we didn't hear about weird accounting problems/crashes. If we do need this to work, the previously proposed VM_PINNED could make this work. Aside from the rb reference leak spotted by Al, Vince's example prog was indeed doing a double mmap() through the use of perf_event_set_output(). This exposes another problem, since we now have 2 events with one buffer, the accounting gets screwy because we account per event. Fix this by making the buffer responsible for its own accounting. [Backporting for 3.4-stable. VM_RESERVED flag was replaced with pair 'VM_DONTEXPAND | VM_DONTDUMP' in 314e51b9 since 3.7.0-rc1, and 314e51b9 comes from a big patchset, we didn't backport the patchset, so I restored 'VM_DNOTEXPAND | VM_DONTDUMP' as before: - vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND | VM_DONTDUMP; + vma->vm_flags |= VM_DONTCOPY | VM_RESERVED; -- zliu] Reported-by:
-
Sage Weil authored
commit 92a49fb0 upstream. Different versions of glibc are broken in different ways, but the short of it is that for the time being, frsize should == bsize, and be used as the multiple for the blocks, free, and available fields. This mirrors what is done for NFS. The previous reporting of the page size for frsize meant that newer glibc and df would report a very small value for the fs size. Fixes http://tracker.ceph.com/issues/3793. Signed-off-by:
Sage Weil <sage@inktank.com> Reviewed-by:
Greg Farnum <greg@inktank.com> Signed-off-by:
-
Peter Zijlstra authored
commit 058ebd0e upstream. Jiri managed to trigger this warning: [] ====================================================== [] [ INFO: possible circular locking dependency detected ] [] 3.10.0+ #228 Tainted: G W [] ------------------------------------------------------- [] p/6613 is trying to acquire lock: [] (rcu_node_0){..-...}, at: [<ffffffff810ca797>] rcu_read_unlock_special+0xa7/0x250 [] [] but task is already holding lock: [] (&ctx->lock){-.-...}, at: [<ffffffff810f2879>] perf_lock_task_context+0xd9/0x2c0 [] [] which lock already depends on the new lock. [] [] the existing dependency chain (in reverse order) is: [] [] -> #4 (&ctx->lock){-.-...}: [] -> #3 (&rq->lock){-.-.-.}: [] -> #2 (&p->pi_lock){-.-.-.}: [] -> #1 (&rnp->nocb_gp_wq[1]){......}: [] -> #0 (rcu_node_0){..-...}: Paul was quick to explain that due to preemptible RCU we cannot call rcu_read_unlock() while holding scheduler (or nested) locks when part of the read side critical section was preemptible. Therefore solve it by making the entire RCU read side non-preemptible. Also pull out the retry from under the non-preempt to play nice with RT. Reported-by:
Jiri Olsa <jolsa@redhat.com> Helped-out-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Jiri Olsa authored
commit 06f41796 upstream. The '!ctx->is_active' check has a valid scenario, so there's no need for the warning. The reason is that there's a time window between the 'ctx->is_active' check in the perf_event_enable() function and the __perf_event_enable() function having: - IRQs on - ctx->lock unlocked where the task could be killed and 'ctx' deactivated by perf_event_exit_task(), ending up with the warning below. So remove the WARN_ON_ONCE() check and add comments to explain it all. This addresses the following warning reported by Vince Weaver: [ 324.983534] ------------[ cut here ]------------ [ 324.984420] WARNING: at kernel/events/core.c:1953 __perf_event_enable+0x187/0x190() [ 324.984420] Modules linked in: [ 324.984420] CPU: 19 PID: 2715 Comm: nmi_bug_snb Not tainted 3.10.0+ #246 [ 324.984420] Hardware name: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/08/2010 [ 324.984420] 0000000000000009 ffff88043fce3ec8 ffffffff8160ea0b ffff88043fce3f00 [ 324.984420] ffffffff81080ff0 ffff8802314fdc00 ffff880231a8f800 ffff88043fcf7860 [ 324.984420] 0000000000000286 ffff880231a8f800 ffff88043fce3f10 ffffffff8108103a [ 324.984420] Call Trace: [ 324.984420] <IRQ> [<ffffffff8160ea0b>] dump_stack+0x19/0x1b [ 324.984420] [<ffffffff81080ff0>] warn_slowpath_common+0x70/0xa0 [ 324.984420] [<ffffffff8108103a>] warn_slowpath_null+0x1a/0x20 [ 324.984420] [<ffffffff81134437>] __perf_event_enable+0x187/0x190 [ 324.984420] [<ffffffff81130030>] remote_function+0x40/0x50 [ 324.984420] [<ffffffff810e51de>] generic_smp_call_function_single_interrupt+0xbe/0x130 [ 324.984420] [<ffffffff81066a47>] smp_call_function_single_interrupt+0x27/0x40 [ 324.984420] [<ffffffff8161fd2f>] call_function_single_interrupt+0x6f/0x80 [ 324.984420] <EOI> [<ffffffff816161a1>] ? _raw_spin_unlock_irqrestore+0x41/0x70 [ 324.984420] [<ffffffff8113799d>] perf_event_exit_task+0x14d/0x210 [ 324.984420] [<ffffffff810acd04>] ? switch_task_namespaces+0x24/0x60 [ 324.984420] [<ffffffff81086946>] do_exit+0x2b6/0xa40 [ 324.984420] [<ffffffff8161615c>] ? _raw_spin_unlock_irq+0x2c/0x30 [ 324.984420] [<ffffffff81087279>] do_group_exit+0x49/0xc0 [ 324.984420] [<ffffffff81096854>] get_signal_to_deliver+0x254/0x620 [ 324.984420] [<ffffffff81043057>] do_signal+0x57/0x5a0 [ 324.984420] [<ffffffff8161a164>] ? __do_page_fault+0x2a4/0x4e0 [ 324.984420] [<ffffffff8161665c>] ? retint_restore_args+0xe/0xe [ 324.984420] [<ffffffff816166cd>] ? retint_signal+0x11/0x84 [ 324.984420] [<ffffffff81043605>] do_notify_resume+0x65/0x80 [ 324.984420] [<ffffffff81616702>] retint_signal+0x46/0x84 [ 324.984420] ---[ end trace 442ec2f04db3771a ]--- Reported-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jiri Olsa authored
commit 734df5ab upstream. Currently when the child context for inherited events is created, it's based on the pmu object of the first event of the parent context. This is wrong for the following scenario: - HW context having HW and SW event - HW event got removed (closed) - SW event stays in HW context as the only event and its pmu is used to clone the child context The issue starts when the cpu context object is touched based on the pmu context object (__get_cpu_context). In this case the HW context will work with SW cpu context ending up with following WARN below. Fixing this by using parent context pmu object to clone from child context. Addresses the following warning reported by Vince Weaver: [ 2716.472065] ------------[ cut here ]------------ [ 2716.476035] WARNING: at kernel/events/core.c:2122 task_ctx_sched_out+0x3c/0x) [ 2716.476035] Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs locn [ 2716.476035] CPU: 0 PID: 3164 Comm: perf_fuzzer Not tainted 3.10.0-rc4 #2 [ 2716.476035] Hardware name: AOpen DE7000/nMCP7ALPx-DE R1.06 Oct.19.2012, BI2 [ 2716.476035] 0000000000000000 ffffffff8102e215 0000000000000000 ffff88011fc18 [ 2716.476035] ffff8801175557f0 0000000000000000 ffff880119fda88c ffffffff810ad [ 2716.476035] ffff880119fda880 ffffffff810af02a 0000000000000009 ffff880117550 [ 2716.476035] Call Trace: [ 2716.476035] [<ffffffff8102e215>] ? warn_slowpath_common+0x5b/0x70 [ 2716.476035] [<ffffffff810ab2bd>] ? task_ctx_sched_out+0x3c/0x5f [ 2716.476035] [<ffffffff810af02a>] ? perf_event_exit_task+0xbf/0x194 [ 2716.476035] [<ffffffff81032a37>] ? do_exit+0x3e7/0x90c [ 2716.476035] [<ffffffff810cd5ab>] ? __do_fault+0x359/0x394 [ 2716.476035] [<ffffffff81032fe6>] ? do_group_exit+0x66/0x98 [ 2716.476035] [<ffffffff8103dbcd>] ? get_signal_to_deliver+0x479/0x4ad [ 2716.476035] [<ffffffff810ac05c>] ? __perf_event_task_sched_out+0x230/0x2d1 [ 2716.476035] [<ffffffff8100205d>] ? do_signal+0x3c/0x432 [ 2716.476035] [<ffffffff810abbf9>] ? ctx_sched_in+0x43/0x141 [ 2716.476035] [<ffffffff810ac2ca>] ? perf_event_context_sched_in+0x7a/0x90 [ 2716.476035] [<ffffffff810ac311>] ? __perf_event_task_sched_in+0x31/0x118 [ 2716.476035] [<ffffffff81050dd9>] ? mmdrop+0xd/0x1c [ 2716.476035] [<ffffffff81051a39>] ? finish_task_switch+0x7d/0xa6 [ 2716.476035] [<ffffffff81002473>] ? do_notify_resume+0x20/0x5d [ 2716.476035] [<ffffffff813654f5>] ? retint_signal+0x3d/0x78 [ 2716.476035] ---[ end trace 827178d8a5966c3d ]--- Reported-by:
-
Jörn Engel authored
commit 0fbfc46f upstream. This patch fixes a potential buffer overflow while processing iscsi_node_auth input for configfs attributes within NodeACL tfc_tpg_nacl_auth_cit context. Signed-off-by:
Joern Engel <joern@logfs.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Bjørn Mork authored
commit 7a6a731b upstream. commit 98cb7e44 ([SCSI] megaraid_sas: Sanity check user supplied length before passing it to dma_alloc_coherent()) introduced a memory leak. Memory allocated for entries following zero length SGL entries will not be freed. Reference: http://bugs.debian.org/688198Signed-off-by:
Bjørn Mork <bjorn@mork.no> Acked-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Mikulas Patocka authored
commit 3ebacb05 upstream. The test if bitmap access is out of bound could errorneously pass if the device size is divisible by 16384 sectors and we are asking for one bitmap after the end. Check for invalid size in the superblock. Invalid size could cause integer overflows in the rest of the code. Signed-off-by:
Mikulas Patocka <mpatocka@artax.karlin.mff.cuni.cz> Signed-off-by:
-
Paul Clements authored
commit c378f70a upstream. Currently, when a disconnect is requested by the user (via NBD_DISCONNECT ioctl) the return from NBD_DO_IT is undefined (it is usually one of several error codes). This means that nbd-client does not know if a manual disconnect was performed or whether a network error occurred. Because of this, nbd-client's persist mode (which tries to reconnect after error, but not after manual disconnect) does not always work correctly. This change fixes this by causing NBD_DO_IT to always return 0 if a user requests a disconnect. This means that nbd-client can correctly either persist the connection (if an error occurred) or disconnect (if the user requested it). Signed-off-by:
Paul Clements <paul.clements@steeleye.com> Acked-by:
Rob Landley <rob@landley.net> Signed-off-by:
-
Axel Lin authored
commit 29ecd78c upstream. In the disable AIE irq code path, current code passes "1" to enable parameter of rv3029c2_rtc_i2c_alarm_set_irq(). Thus it does not disable AIE irq. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Heiko Schocher <hs@denx.de> Signed-off-by:
-
Kees Cook authored
commit 1c8fca1d upstream. The template lookup interface does not provide a way to use format strings, so make sure that the interface cannot be abused accidentally. Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Kees Cook authored
commit ffc8b308 upstream. Disk names may contain arbitrary strings, so they must not be interpreted as format strings. It seems that only md allows arbitrary strings to be used for disk names, but this could allow for a local memory corruption from uid 0 into ring 0. CVE-2013-2851 Signed-off-by:
-
Junxiao Bi authored
commit ef962df0 upstream. Inlined xattr shared free space of inode block with inlined data or data extent record, so the size of the later two should be adjusted when inlined xattr is enabled. See ocfs2_xattr_ibody_init(). But this isn't done well when reflink. For inode with inlined data, its max inlined data size is adjusted in ocfs2_duplicate_inline_data(), no problem. But for inode with data extent record, its record count isn't adjusted. Fix it, or data extent record and inlined xattr may overwrite each other, then cause data corruption or xattr failure. One panic caused by this bug in our test environment is the following: kernel BUG at fs/ocfs2/xattr.c:1435! invalid opcode: 0000 [#1] SMP Pid: 10871, comm: multi_reflink_t Not tainted 2.6.39-300.17.1.el5uek #1 RIP: ocfs2_xa_offset_pointer+0x17/0x20 [ocfs2] RSP: e02b:ffff88007a587948 EFLAGS: 00010283 RAX: 0000000000000000 RBX: 0000000000000010 RCX: 00000000000051e4 RDX: ffff880057092060 RSI: 0000000000000f80 RDI: ffff88007a587a68 RBP: ffff88007a587948 R08: 00000000000062f4 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000010 R13: ffff88007a587a68 R14: 0000000000000001 R15: ffff88007a587c68 FS: 00007fccff7f06e0(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000015cf000 CR3: 000000007aa76000 CR4: 0000000000000660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process multi_reflink_t Call Trace: ocfs2_xa_reuse_entry+0x60/0x280 [ocfs2] ocfs2_xa_prepare_entry+0x17e/0x2a0 [ocfs2] ocfs2_xa_set+0xcc/0x250 [ocfs2] ocfs2_xattr_ibody_set+0x98/0x230 [ocfs2] __ocfs2_xattr_set_handle+0x4f/0x700 [ocfs2] ocfs2_xattr_set+0x6c6/0x890 [ocfs2] ocfs2_xattr_user_set+0x46/0x50 [ocfs2] generic_setxattr+0x70/0x90 __vfs_setxattr_noperm+0x80/0x1a0 vfs_setxattr+0xa9/0xb0 setxattr+0xc3/0x120 sys_fsetxattr+0xa8/0xd0 system_call_fastpath+0x16/0x1b Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Jie Liu <jeff.liu@oracle.com> Acked-by:
Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
commit da331ba8 upstream. tasklet_kill() may sleep so call it before taking pch->lock. Fixes following lockup: BUG: scheduling while atomic: cat/2383/0x00000002 Modules linked in: unwind_backtrace+0x0/0xfc __schedule_bug+0x4c/0x58 __schedule+0x690/0x6e0 sys_sched_yield+0x70/0x78 tasklet_kill+0x34/0x8c pl330_free_chan_resources+0x24/0x88 dma_chan_put+0x4c/0x50 [...] BUG: spinlock lockup suspected on CPU#0, swapper/0/0 lock: 0xe52aa04c, .magic: dead4ead, .owner: cat/2383, .owner_cpu: 1 unwind_backtrace+0x0/0xfc do_raw_spin_lock+0x194/0x204 _raw_spin_lock_irqsave+0x20/0x28 pl330_tasklet+0x2c/0x5a8 tasklet_action+0xfc/0x114 __do_softirq+0xe4/0x19c irq_exit+0x98/0x9c handle_IPI+0x124/0x16c gic_handle_irq+0x64/0x68 __irq_svc+0x40/0x70 cpuidle_wrap_enter+0x4c/0xa0 cpuidle_enter_state+0x18/0x68 cpuidle_idle_call+0xac/0xe0 cpu_idle+0xac/0xf0 Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Jassi Brar <jassisinghbrar@gmail.com> Cc: Vinod Koul <vinod.koul@linux.intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Signed-off-by:
-
Tyler Hicks authored
commit 2cb33cac upstream. A malicious monitor can craft an auth reply message that could cause a NULL function pointer dereference in the client's kernel. To prevent this, the auth_none protocol handler needs an empty ceph_auth_client_ops->build_request() function. CVE-2013-1059 Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Reported-by:
Chanam Park <chanam.park@hkpco.kr> Reviewed-by:
Seth Arnold <seth.arnold@canonical.com> Reviewed-by:
-
zhangwei(Jovi) authored
commit 11034ae9 upstream. All syscall tracing irqs-off tags are wrong, the syscall enter entry doesn't disable irqs. [root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event [root@jovi tracing]# cat trace # tracer: nop # # entries-in-buffer/entries-written: 13/13 #P:2 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | irqbalance-513 [000] d... 56115.496766: sys_open(filename: 804e1a6, flags: 0, mode: 1b6) irqbalance-513 [000] d... 56115.497008: sys_open(filename: 804e1bb, flags: 0, mode: 1b6) sendmail-771 [000] d... 56115.827982: sys_open(filename: b770e6d1, flags: 0, mode: 1b6) The reason is syscall tracing doesn't record irq_flags into buffer. The proper display is: [root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event [root@jovi tracing]# cat trace # tracer: nop # # entries-in-buffer/entries-written: 14/14 #P:2 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | irqbalance-514 [001] .... 46.213921: sys_open(filename: 804e1a6, flags: 0, mode: 1b6) irqbalance-514 [001] .... 46.214160: sys_open(filename: 804e1bb, flags: 0, mode: 1b6) <...>-920 [001] .... 47.307260: sys_open(filename: 4e82a0c5, flags: 80000, mode: 0) Link: http://lkml.kernel.org/r/1365564393-10972-3-git-send-email-jovi.zhangwei@huawei.comSigned-off-by:
zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
J. Bruce Fields authored
commit 24750082 upstream. A freebsd NFSv4.0 client was getting rare IO errors expanding a tarball. A network trace showed the server returning BAD_XDR on the final getattr of a getattr+write+getattr compound. The final getattr started on a page boundary. I believe the Linux client ignores errors on the post-write getattr, and that that's why we haven't seen this before. Reported-by:
Rick Macklem <rmacklem@uoguelph.ca> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Theodore Ts'o authored
commit 39c04153 upstream. Once we decrement transaction->t_updates, if this is the last handle holding the transaction from closing, and once we release the t_handle_lock spinlock, it's possible for the transaction to commit and be released. In practice with normal kernels, this probably won't happen, since the commit happens in a separate kernel thread and it's unlikely this could all happen within the space of a few CPU cycles. On the other hand, with a real-time kernel, this could potentially happen, so save the tid found in transaction->t_tid before we release t_handle_lock. It would require an insane configuration, such as one where the jbd2 thread was set to a very high real-time priority, perhaps because a high priority real-time thread is trying to read or write to a file system. But some people who use real-time kernels have been known to do insane things, including controlling laser-wielding industrial robots. :-) Signed-off-by:
-
Al Viro authored
commit 64cb9273 upstream. Both ext3 and ext4 htree_dirblock_to_tree() is just filling the in-core rbtree for use by call_filldir(). All updates of ->f_pos are done by the latter; bumping it here (on error) is obviously wrong - we might very well have it nowhere near the block we'd found an error in. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Chen Gang authored
commit 8246aca7 upstream. the smp_release_cpus is a normal funciton and called in normal environments, but it calls the __initdata spinning_secondaries. need modify spinning_secondaries to match smp_release_cpus. the related warning: (the linker report boot_paca.33377, but it should be spinning_secondaries) ----------------------------------------------------------------------------- WARNING: arch/powerpc/kernel/built-in.o(.text+0x23176): Section mismatch in reference from the function .smp_release_cpus() to the variable .init.data:boot_paca.33377 The function .smp_release_cpus() references the variable __initdata boot_paca.33377. This is often because .smp_release_cpus lacks a __initdata annotation or the annotation of boot_paca.33377 is wrong. WARNING: arch/powerpc/kernel/built-in.o(.text+0x231fe): Section mismatch in reference from the function .smp_release_cpus() to the variable .init.data:boot_paca.33377 The function .smp_release_cpus() references the variable __initdata boot_paca.33377. This is often because .smp_release_cpus lacks a __initdata annotation or the annotation of boot_paca.33377 is wrong. ----------------------------------------------------------------------------- Signed-off-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Greg Kroah-Hartman authored
Revert "serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller" commit 828c6a10 upstream. This reverts commit 8d2f8cd4. As reported by Stefan, this device already works with the parport_serial driver, so the 8250_pci driver should not also try to grab it as well. Reported-by:
Stefan Seyfried <stefan.seyfried@googlemail.com> Cc: Wang YanQing <udknight@gmail.com> Signed-off-by:
-
Artem Bityutskiy authored
commit 605c912b upstream. Al Viro pointed me to the fact that '->readdir()' and '->llseek()' have no mutual exclusion, which means the 'ubifs_dir_llseek()' can be run while we are in the middle of 'ubifs_readdir()'. This means that 'file->private_data' can be freed while 'ubifs_readdir()' uses it, and this is a very bad bug: not only 'ubifs_readdir()' can return garbage, but this may corrupt memory and lead to all kinds of problems like crashes an security holes. This patch fixes the problem by using the 'file->f_version' field, which '->llseek()' always unconditionally sets to zero. We set it to 1 in 'ubifs_readdir()' and whenever we detect that it became 0, we know there was a seek and it is time to clear the state saved in 'file->private_data'. I tested this patch by writing a user-space program which runds readdir and seek in parallell. I could easily crash the kernel without these patches, but could not crash it with these patches. Reported-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Artem Bityutskiy authored
commit 33f1a63a upstream. Al Viro pointed me to the fact that '->readdir()' and '->llseek()' have no mutual exclusion, which means the 'ubifs_dir_llseek()' can be run while we are in the middle of 'ubifs_readdir()'. First of all, this means that 'file->private_data' can be freed while 'ubifs_readdir()' uses it. But this particular patch does not fix the problem. This patch is only a preparation, and the fix will follow next. In this patch we make 'ubifs_readdir()' stop using 'file->f_pos' directly, because 'file->f_pos' can be changed by '->llseek()' at any point. This may lead 'ubifs_readdir()' to returning inconsistent data: directory entry names may correspond to incorrect file positions. So here we introduce a local variable 'pos', read 'file->f_pose' once at very the beginning, and then stick to 'pos'. The result of this is that when 'ubifs_dir_llseek()' changes 'file->f_pos' while we are in the middle of 'ubifs_readdir()', the latter "wins". Reported-by:
-
Laszlo Ersek authored
commit 0b0c002c upstream. ... because the "clock_event_device framework" already accounts for idle time through the "event_handler" function pointer in xen_timer_interrupt(). The patch is intended as the completion of [1]. It should fix the double idle times seen in PV guests' /proc/stat [2]. It should be orthogonal to stolen time accounting (the removed code seems to be isolated). The approach may be completely misguided. [1] https://lkml.org/lkml/2011/10/6/10 [2] http://lists.xensource.com/archives/html/xen-devel/2010-08/msg01068.html John took the time to retest this patch on top of v3.10 and reported: "idle time is correctly incremented for pv and hvm for the normal case, nohz=off and nohz=idle." so lets put this patch in. Signed-off-by:
Laszlo Ersek <lersek@redhat.com> Signed-off-by:
John Haxby <john.haxby@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Bart Van Assche authored
commit 9e04d380 upstream. Direct compare of jiffies related values does not work in the wrap around case. Replace it with time_is_after_jiffies(). Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/519BC066.5080600@acm.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Jan Kara authored
commit a5faeaf9 upstream. Code in blkdev.c moves a device inode to default_backing_dev_info when the last reference to the device is put and moves the device inode back to its bdi when the first reference is acquired. This includes moving to wb.b_dirty list if the device inode is dirty. The code however doesn't setup timer to wake corresponding flusher thread and while wb.b_dirty list is non-empty __mark_inode_dirty() will not set it up either. Thus periodic writeback is effectively disabled until a sync(2) call which can lead to unexpected data loss in case of crash or power failure. Fix the problem by setting up a timer for periodic writeback in case we add the first dirty inode to wb.b_dirty list in bdev_inode_switch_bdi(). Reported-by:
Bert De Jonghe <Bert.DeJonghe@amplidata.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Ben Hutchings authored
commit 2779db8d upstream. Commit 02725e74 ('genirq: Use irq_get/put functions'), inadvertently changed can_request_irq() to return 0 for IRQs that have no action. This causes pcibios_lookup_irq() to select only IRQs that already have an action with IRQF_SHARED set, or to fail if there are none. Change can_request_irq() to return 1 for IRQs that have no action (if the first two conditions are met). Reported-by:
Bjarni Ingi Gislason <bjarniig@rhi.hi.is> Tested-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is> (against 3.2) Signed-off-by:
-
Zefan Li authored
commit 578a1310 upstream. We triggered an oops while running trinity with 3.4 kernel: BUG: unable to handle kernel paging request at 0000000100000d07 IP: [<ffffffffa0109738>] dlci_ioctl+0xd8/0x2d4 [dlci] PGD 640c0d067 PUD 0 Oops: 0000 [#1] PREEMPT SMP CPU 3 ... Pid: 7302, comm: trinity-child3 Not tainted 3.4.24.09+ 40 Huawei Technologies Co., Ltd. Tecal RH2285 /BC11BTSA RIP: 0010:[<ffffffffa0109738>] [<ffffffffa0109738>] dlci_ioctl+0xd8/0x2d4 [dlci] ... Call Trace: [<ffffffff8137c5c3>] sock_ioctl+0x153/0x280 [<ffffffff81195494>] do_vfs_ioctl+0xa4/0x5e0 [<ffffffff8118354a>] ? fget_light+0x3ea/0x490 [<ffffffff81195a1f>] sys_ioctl+0x4f/0x80 [<ffffffff81478b69>] system_call_fastpath+0x16/0x1b ... It's because the net device is not a dlci device. Reported-by:
Li Jinyue <lijinyue@huawei.com> Signed-off-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
-
Zefan Li authored
commit 11eb2645 upstream. Otherwise the net device returned can be freed at anytime. Signed-off-by:
-
