- 27 Apr, 2019 2 commits
-
-
Daniel Borkmann authored
Since ARMv8.1 supplement introduced LSE atomic instructions back in 2016, lets add support for STADD and use that in favor of LDXR / STXR loop for the XADD mapping if available. STADD is encoded as an alias for LDADD with XZR as the destination register, therefore add LDADD to the instruction encoder along with STADD as special case and use it in the JIT for CPUs that advertise LSE atomics in CPUID register. If immediate offset in the BPF XADD insn is 0, then use dst register directly instead of temporary one. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Prefetch-with-intent-to-write is currently part of the XADD mapping in the AArch64 JIT and follows the kernel's implementation of atomic_add. This may interfere with other threads executing the LDXR/STXR loop, leading to potential starvation and fairness issues. Drop the optional prefetch instruction. Fixes: 85f68fe8 ("bpf, arm64: implement jiting of BPF_XADD") Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
- 26 Apr, 2019 6 commits
-
-
Alexei Starovoitov authored
Andrii Nakryiko says: ==================== This patch set adds a new `bpftool btf dump` sub-command, which allows to dump BTF contents (only types for now). Currently it only outputs low-level content, almost 1:1 with binary BTF format, but follow up patches will add ability to dump BTF types as a compilable C header file. JSON output is supported as well. Patch #1 adds `btf` sub-command, dumping BTF types in human-readable format. It also implements reading .BTF data from ELF file. Patch #2 adds minimal documentation with output format examples and different ways to specify source of BTF data. Patch #3 adds support for btf command in bash-completion/bpftool script. Patch #4 fixes minor indentation issue in bash-completion script. Output format is mostly following existing format of BPF verifier log, but deviates from it in few places. More details are in commit message for patch 1. Example of output for all supported BTF kinds are in patch #2 as part of documentation. Some field names are quite verbose and I'd rather shorten them, if we don't feel like being very close to BPF verifier names is a necessity, but in this patch I left them exactly the same as in verifier log. v3->v4: - reverse Christmas tree (Quentin) - better docs (Quentin) v2->v3: - make map's key|value|kv|all suggestion more precise (Quentin) - fix default case indentations (Quentin) v1->v2: - fix unnecessary trailing whitespaces in bpftool-btf.rst (Yonghong) - add btf in main.c for a list of possible OBJECTs - handle unknown keyword under `bpftool btf dump` (Yonghong) ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrii Nakryiko authored
Fix misaligned default case branch for `prog dump` sub-command. Reported-by: Quentin Monnet <quentin.monnet@netronome.com> Cc: Yonghong Song <yhs@fb.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrii Nakryiko authored
Add full support for btf command in bash-completion script. Cc: Quentin Monnet <quentin.monnet@netronome.com> Cc: Yonghong Song <yhs@fb.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrii Nakryiko authored
Document usage and sample output format for `btf dump` sub-command. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrii Nakryiko authored
Add new `btf dump` sub-command to bpftool. It allows to dump human-readable low-level BTF types representation of BTF types. BTF can be retrieved from few different sources: - from BTF object by ID; - from PROG, if it has associated BTF; - from MAP, if it has associated BTF data; it's possible to narrow down types to either key type, value type, both, or all BTF types; - from ELF file (.BTF section). Output format mostly follows BPF verifier log format with few notable exceptions: - all the type/field/param/etc names are enclosed in single quotes to allow easier grepping and to stand out a little bit more; - FUNC_PROTO output follows STRUCT/UNION/ENUM format of having one line per each argument; this is more uniform and allows easy grepping, as opposed to succinct, but inconvenient format that BPF verifier log is using. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Benjamin Poirier authored
The test meant to use the saved value of errno. Given the current code, it makes no practical difference however. Fixes: bf598a8f ("bpftool: Improve handling of ENOENT on map dumps") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
- 25 Apr, 2019 7 commits
-
-
Stanislav Fomichev authored
Right now there is no way to query whether BPF flow_dissector program is attached to a network namespace or not. In previous commit, I added support for querying that info, show it when doing `bpftool net`: $ bpftool prog loadall ./bpf_flow.o \ /sys/fs/bpf/flow type flow_dissector \ pinmaps /sys/fs/bpf/flow $ bpftool prog 3: flow_dissector name _dissect tag 8c9e917b513dd5cc gpl loaded_at 2019-04-23T16:14:48-0700 uid 0 xlated 656B jited 461B memlock 4096B map_ids 1,2 btf_id 1 ... $ bpftool net -j [{"xdp":[],"tc":[],"flow_dissector":[]}] $ bpftool prog attach pinned \ /sys/fs/bpf/flow/flow_dissector flow_dissector $ bpftool net -j [{"xdp":[],"tc":[],"flow_dissector":["id":3]}] Doesn't show up in a different net namespace: $ ip netns add test $ ip netns exec test bpftool net -j [{"xdp":[],"tc":[],"flow_dissector":[]}] Non-json output: $ bpftool net xdp: tc: flow_dissector: id 3 v2: * initialization order (Jakub Kicinski) * clear errno for batch mode (Quentin Monnet) Signed-off-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
target_fd is target namespace. If there is a flow dissector BPF program attached to that namespace, its (single) id is returned. v5: * drop net ref right after rcu unlock (Daniel Borkmann) v4: * add missing put_net (Jann Horn) v3: * add missing inline to skb_flow_dissector_prog_query static def (kbuild test robot <lkp@intel.com>) v2: * don't sleep in rcu critical section (Jakub Kicinski) * check input prog_cnt (exit early) Cc: Jann Horn <jannh@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Daniel T. Lee authored
This commit adds hbm to .gitignore which is currently ommited from the ignore file. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Daniel T. Lee authored
Currently, building bpf samples will cause the following error. ./tools/lib/bpf/bpf.h:132:27: error: 'UINT32_MAX' undeclared here (not in a function) .. #define BPF_LOG_BUF_SIZE (UINT32_MAX >> 8) /* verifier maximum in kernels <= 5.1 */ ^ ./samples/bpf/bpf_load.h:31:25: note: in expansion of macro 'BPF_LOG_BUF_SIZE' extern char bpf_log_buf[BPF_LOG_BUF_SIZE]; ^~~~~~~~~~~~~~~~ Due to commit 4519efa6 ("libbpf: fix BPF_LOG_BUF_SIZE off-by-one error") hard-coded size of BPF_LOG_BUF_SIZE has been replaced with UINT32_MAX which is defined in <stdint.h> header. Even with this change, bpf selftests are running fine since these are built with clang and it includes header(-idirafter) from clang/6.0.0/include. (it has <stdint.h>) clang -I. -I./include/uapi -I../../../include/uapi -idirafter /usr/local/include -idirafter /usr/include \ -idirafter /usr/lib/llvm-6.0/lib/clang/6.0.0/include -idirafter /usr/include/x86_64-linux-gnu \ -Wno-compare-distinct-pointer-types -O2 -target bpf -emit-llvm -c progs/test_sysctl_prog.c -o - | \ llc -march=bpf -mcpu=generic -filetype=obj -o /linux/tools/testing/selftests/bpf/test_sysctl_prog.o But bpf samples are compiled with GCC, and it only searches and includes headers declared at the target file. As '#include <stdint.h>' hasn't been declared in tools/lib/bpf/bpf.h, it causes build failure of bpf samples. gcc -Wp,-MD,./samples/bpf/.sockex3_user.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes \ -O2 -fomit-frame-pointer -std=gnu89 -I./usr/include -I./tools/lib/ -I./tools/testing/selftests/bpf/ \ -I./tools/ lib/ -I./tools/include -I./tools/perf -c -o ./samples/bpf/sockex3_user.o ./samples/bpf/sockex3_user.c; This commit add declaration of '#include <stdint.h>' to tools/lib/bpf/bpf.h to fix this problem. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Alexei Starovoitov authored
Daniel Borkmann says: ==================== Two small fixes in relation to global data handling. Thanks! ==================== Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Ran into it while testing; in bpf_object__init_maps() data can be NULL in the case where no map section is present. Therefore we simply cannot access data->d_size before NULL test. Move the pr_debug() where it's safe to access. Fixes: d859900c ("bpf, libbpf: support global data/bss/rodata sections") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Andrii reported a corner case where e.g. global static data is present in the BPF ELF file in form of .data/.bss/.rodata section, but without any relocations to it. Such programs could be loaded before commit d859900c ("bpf, libbpf: support global data/bss/rodata sections"), whereas afterwards if kernel lacks support then loading would fail. Add a probing mechanism which skips setting up libbpf internal maps in case of missing kernel support. In presence of relocation entries, we abort the load attempt. Fixes: d859900c ("bpf, libbpf: support global data/bss/rodata sections") Reported-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
- 23 Apr, 2019 25 commits
-
-
Daniel Borkmann authored
Willem de Bruijn says: ==================== Expand the tc tunnel encap support with protocols that convert the network layer protocol, such as 6in4. This is analogous to existing support in bpf_skb_proto_6_to_4. Patch 1 implements the straightforward logic Patch 2 tests it with a 6in4 tunnel Changes v1->v2 - improve documentation in test ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Willem de Bruijn authored
So far, all BPF tc tunnel testcases encapsulate in the same network protocol. Add an encap testcase that requires updating skb->protocol. The 6in4 tunnel encapsulates an IPv6 packet inside an IPv4 tunnel. Verify that bpf_skb_net_grow correctly updates skb->protocol to select the right protocol handler in __netif_receive_skb_core. The BPF program should also manually update the link layer header to encode the right network protocol. Changes v1->v2 - improve documentation of non-obvious logic Signed-off-by: Willem de Bruijn <willemb@google.com> Tested-by: Alan Maguire <alan.maguire@oracle.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Willem de Bruijn authored
Some tunnels, like sit, change the network protocol of packet. If so, update skb->protocol to match the new type. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Daniel Borkmann authored
Stanislav Fomichev says: ==================== Currently, when eth_get_headlen calls flow dissector, it doesn't pass any skb. Because we use passed skb to lookup associated networking namespace to find whether we have a BPF program attached or not, we always use C-based flow dissector in this case. The goal of this patch series is to add new networking namespace argument to the eth_get_headlen and make BPF flow dissector programs be able to work in the skb-less case. The series goes like this: * use new kernel context (struct bpf_flow_dissector) for flow dissector programs; this makes it easy to distinguish between skb and no-skb case and supports calling BPF flow dissector on a chunk of raw data * convert BPF_PROG_TEST_RUN to use raw data * plumb network namespace into __skb_flow_dissect from all callers * handle no-skb case in __skb_flow_dissect * update eth_get_headlen to include net namespace argument and convert all existing users * add selftest to make sure bpf_skb_load_bytes is not allowed in the no-skb mode * extend test_progs to exercise skb-less flow dissection as well * stop adjusting nhoff/thoff by ETH_HLEN in BPF_PROG_TEST_RUN v6: * more suggestions by Alexei: * eth_get_headlen now takes net dev, not net namespace * test skb-less case via tun eth_get_headlen * fix return errors in bpf_flow_load * don't adjust nhoff/thoff by ETH_HLEN v5: * API changes have been submitted via bpf/stable tree v4: * prohibit access to vlan fields as well (otherwise, inconsistent between skb/skb-less cases) * drop extra unneeded check for skb->vlan_present in bpf_flow.c v3: * new kernel xdp_buff-like context per Alexei suggestion * drop skb_net helper * properly clamp flow_keys->nhoff v2: * moved temporary skb from stack into percpu (avoids memset of ~200 bytes per packet) * tightened down access to __sk_buff fields from flow dissector programs to avoid touching shinfo (whitelist only relevant fields) * addressed suggestions from Willem ==================== Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
Now that we use skb-less flow dissector let's return true nhoff and thoff. We used to adjust them by ETH_HLEN because that's how it was done in the skb case. For VLAN tests that looks confusing: nhoff is pointing to vlan parts :-\ Warning, this is an API change for BPF_PROG_TEST_RUN! Feel free to drop if you think that it's too late at this point to fix it. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
Right now we incorrectly return 'ret' which is always zero at that point. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
Export last_dissection map from flow dissector and use a known place in tun driver to trigger BPF flow dissection. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
When flow dissector is called without skb, we want to make sure bpf_skb_load_bytes invocations return error. Add small test which tries to read single byte from a packet. bpf_skb_load_bytes should always fail under BPF_PROG_TEST_RUN because it was converted to the skb-less mode. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
Update all users of eth_get_headlen to pass network device, fetch network namespace from it and pass it down to the flow dissector. This commit is a noop until administrator inserts BPF flow dissector program. Cc: Maxim Krasnyansky <maxk@qti.qualcomm.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: intel-wired-lan@lists.osuosl.org Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
When called without skb, gather all required data from the __skb_flow_dissect's arguments and use recently introduces no-skb mode of bpf flow dissector. Note: WARN_ON_ONCE(!net) will now trigger for eth_get_headlen users. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
This new argument will be used in the next patches for the eth_get_headlen use case. eth_get_headlen calls flow dissector with only data (without skb) so there is currently no way to pull attached BPF flow dissector program. With this new argument, we can amend the callers to explicitly pass network namespace so we can use attached BPF program. Signed-off-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
Now that we have bpf_flow_dissect which can work on raw data, use it when doing BPF_PROG_TEST_RUN for flow dissector. Simplifies bpf_prog_test_run_flow_dissector and allows us to test no-skb mode. Note, that previously, with bpf_flow_dissect_skb we used to call eth_type_trans which pulled L2 (ETH_HLEN) header and we explicitly called skb_reset_network_header. That means flow_keys->nhoff would be initialized to 0 (skb_network_offset) in init_flow_keys. Now we call bpf_flow_dissect with nhoff set to ETH_HLEN and need to undo it once the dissection is done to preserve the existing behavior. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
struct bpf_flow_dissector has a small subset of sk_buff fields that flow dissector BPF program is allowed to access and an optional pointer to real skb. Real skb is used only in bpf_skb_load_bytes helper to read non-linear data. The real motivation for this is to be able to call flow dissector from eth_get_headlen context where we don't have an skb and need to dissect raw bytes. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Florian Fainelli authored
All we do is write the length/status and address bits to a DMA descriptor only to write its contents into on-chip registers right after, eliminate this unnecessary step. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When a bridge port is being deleted, do not dereference it later in br_vlan_port_event() as it can result in a use-after-free [1] if the RCU callback was executed before invoking the function. [1] [ 129.638551] ================================================================== [ 129.646904] BUG: KASAN: use-after-free in br_vlan_port_event+0x53c/0x5fd [ 129.654406] Read of size 8 at addr ffff8881e4aa1ae8 by task ip/483 [ 129.663008] CPU: 0 PID: 483 Comm: ip Not tainted 5.1.0-rc5-custom-02265-ga946bd73daac #1383 [ 129.672359] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ 129.682484] Call Trace: [ 129.685242] dump_stack+0xa9/0x10e [ 129.689068] print_address_description.cold.2+0x9/0x25e [ 129.694930] kasan_report.cold.3+0x78/0x9d [ 129.704420] br_vlan_port_event+0x53c/0x5fd [ 129.728300] br_device_event+0x2c7/0x7a0 [ 129.741505] notifier_call_chain+0xb5/0x1c0 [ 129.746202] rollback_registered_many+0x895/0xe90 [ 129.793119] unregister_netdevice_many+0x48/0x210 [ 129.803384] rtnl_delete_link+0xe1/0x140 [ 129.815906] rtnl_dellink+0x2a3/0x820 [ 129.844166] rtnetlink_rcv_msg+0x397/0x910 [ 129.868517] netlink_rcv_skb+0x137/0x3a0 [ 129.882013] netlink_unicast+0x49b/0x660 [ 129.900019] netlink_sendmsg+0x755/0xc90 [ 129.915758] ___sys_sendmsg+0x761/0x8e0 [ 129.966315] __sys_sendmsg+0xf0/0x1c0 [ 129.988918] do_syscall_64+0xa4/0x470 [ 129.993032] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 129.998696] RIP: 0033:0x7ff578104b58 ... [ 130.073811] Allocated by task 479: [ 130.077633] __kasan_kmalloc.constprop.5+0xc1/0xd0 [ 130.083008] kmem_cache_alloc_trace+0x152/0x320 [ 130.088090] br_add_if+0x39c/0x1580 [ 130.092005] do_set_master+0x1aa/0x210 [ 130.096211] do_setlink+0x985/0x3100 [ 130.100224] __rtnl_newlink+0xc52/0x1380 [ 130.104625] rtnl_newlink+0x6b/0xa0 [ 130.108541] rtnetlink_rcv_msg+0x397/0x910 [ 130.113136] netlink_rcv_skb+0x137/0x3a0 [ 130.117538] netlink_unicast+0x49b/0x660 [ 130.121939] netlink_sendmsg+0x755/0xc90 [ 130.126340] ___sys_sendmsg+0x761/0x8e0 [ 130.130645] __sys_sendmsg+0xf0/0x1c0 [ 130.134753] do_syscall_64+0xa4/0x470 [ 130.138864] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 130.146195] Freed by task 0: [ 130.149421] __kasan_slab_free+0x125/0x170 [ 130.154016] kfree+0xf3/0x310 [ 130.157349] kobject_put+0x1a8/0x4c0 [ 130.161363] rcu_core+0x859/0x19b0 [ 130.165175] __do_softirq+0x250/0xa26 [ 130.170956] The buggy address belongs to the object at ffff8881e4aa1ae8 which belongs to the cache kmalloc-1k of size 1024 [ 130.184972] The buggy address is located 0 bytes inside of 1024-byte region [ffff8881e4aa1ae8, ffff8881e4aa1ee8) Fixes: 9c0ec2e7 ("bridge: support binding vlan dev link state to vlan member bridge ports") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Cc: Mike Manning <mmanning@vyatta.att-mail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Mike Manning <mmanning@vyatta.att-mail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Crag.Wang authored
Without this patch the socket address family sporadically gets wrong value ends up the dev_set_mac_address() fails to set the desired MAC address. Fixes: 25766271 ("r8152: Refresh MAC address during USBDEVFS_RESET") Signed-off-by: Crag.Wang <crag.wang@dell.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-By: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Shared buffer improvements This patchset includes two improvements with regards to shared buffer configuration in mlxsw. The first part of this patchset forbids the user from performing illegal shared buffer configuration that can result in unnecessary packet loss. In order to better communicate these configuration failures to the user, extack is propagated from devlink towards drivers. This is done in patches #1-#8. The second part of the patchset deals with the shared buffer configuration of the CPU port. When a packet is trapped by the device, it is sent across the PCI bus to the attached host CPU. From the device's perspective, it is as if the packet is transmitted through the CPU port. While testing traffic directed at the CPU it became apparent that for certain packet sizes and certain burst sizes, the current shared buffer configuration of the CPU port is inadequate and results in packet drops. The configuration is adjusted by patches #9-#14 that create two new pools - ingress & egress - which are dedicated for CPU traffic. ==================== Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Switch the CPU port to use the new dedicated egress pool instead the previously used egress pool which was shared with normal front panel ports. Add per-port quotas for the amount of traffic that can be buffered for the CPU port and also adjust the per-{port, TC} quotas. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
The CPU port is used to transmit traffic that is trapped to the host CPU. It is therefore irrelevant to define ingress quota for it. Add a 'skip_ingress' argument to the function tasked with configuring per-port quotas, so that ingress quotas could be skipped in case the passed local port is the CPU port. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
The function is used to set the per-port shared buffer quotas. Currently, these quotas are only set for front panel ports, but a subsequent patch will configure these quotas for the CPU port as well. The configuration required for the CPU port is a bit different than that of the front panel ports, so split the business logic into a separate function which will be called with different parameters for the CPU port. No functional changes intended. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Use the new ingress pool that was added in the previous patch for control packets (e.g., STP, LACP) that are trapped to the CPU. The previous management pool is no longer necessary and therefore its size is set to 0. The maximum quota for traffic towards the CPU is increased to 50% of the free space in the new ingress pool and therefore the reserved space is reduced by half, to 10KB - in both the shared and headroom buffer. This allows for more efficient utilization of the shared buffer as reserved space cannot be used for other purposes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Packets that are trapped to the CPU are transmitted through the CPU port to the attached host. The CPU port is therefore like any other port and needs to have shared buffer configuration. The maximum quotas configured for the CPU are provided using dynamic threshold and cannot be changed by the user. In order to make sure that these thresholds are always valid, the configuration of the threshold type of these pools is forbidden. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
The code currently assumes that ingress pools have lower indices than egress pools. This makes it impossible to add more ingress pools without breaking user configuration that relies on a certain pool index to correspond to an egress pool. Remove such assumptions from the code, so that more ingress pools could be added by subsequent patches. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Commit e83c045e ("mlxsw: spectrum_buffers: Configure MC pool") configured the threshold of the multicast TCs as infinite so that the admission of multicast packets is only depended on per-switch priority threshold. Forbid the user from changing the thresholds of these multicast TCs and their binding to a different pool. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Multicast packets have three egress quotas: * Per egress port * Per egress port and traffic class * Per switch priority The limits on the switch priority are not exposed to the user and specified as dynamic threshold on the first egress pool. Forbid changing the threshold type of the first egress pool so that these limits are always valid. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-