- 23 Mar, 2011 40 commits
-
-
Amerigo Wang authored
Move setup_nr_cpu_ids(), smp_init() and some other SMP boot parameter setup functions from init/main.c to kenrel/smp.c, saves some #ifdef CONFIG_SMP. Signed-off-by:
WANG Cong <amwang@redhat.com> Cc: Rakib Mullick <rakib.mullick@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tejun Heo <tj@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Uwe Kleine-König authored
PTR_RET() can be used if you have an error-pointer and are only interested in the eventual error value, but not the pointer. Yields the usual 0 for no error, -ESOMETHING otherwise. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Olaf Hering authored
The oops=panic cmdline option is not x86 specific, move it to generic code. Update documentation. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Axel Lin authored
The device table is required to load modules based on modaliases. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Cc: Masayuki Ohtak <masa-korg@dsn.okisemi.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Vasiliy Kulikov authored
Don't allow everybody to change device settings. Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Acked-by:
Hartley Sweeten <hartleys@visionengravers.com> Cc: Matthieu Crapet <mcrapet@gmail.com> Signed-off-by:
-
Axel Lin authored
request_mem_region() will call kzalloc to allocate memory for struct resource. release_resource() unregisters the resource but does not free the allocated memory, thus use release_mem_region() instead to fix the memory leak. Signed-off-by:
-
Axel Lin authored
i2c_master_recv() returns negative errno, or else the number of bytes read. Thus i2c_master_recv(client, i2c_data, 2) returns 2 instead of 1 in success case. [akpm@linux-foundation.org: make `ret' signed] Signed-off-by:
-
Hong Liu authored
Put the device into runtime suspend after resume()/probe() is handled by the PM core and the device core code. No need to manually add them in each single driver. And correct the runtime state in remove(). Signed-off-by:
Hong Liu <hong.liu@intel.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Pratyush Anand authored
This is a configurable gadget. can be configured by configfs interface. Any IP available at PCIE bus can be programmed to be used by host controller.It supoorts both INTX and MSI. By default, the gadget is configured for INTX and SYSRAM1 is mapped to BAR0 with size 0x1000 Signed-off-by:
Pratyush Anand <pratyush.anand@st.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by:
-
Shubhrajyoti Datta authored
Free the memory that is used only at init Signed-off-by:
Shubhrajyoti Datta <shubhrajyoti@ti.com> Signed-off-by:
-
Shubhrajyoti Datta authored
Signed-off-by:
-
Richard Kennedy authored
Re-ordering struct block_inode to remove 8 bytes of padding on 64 bit builds, which also shrinks bdev_inode by 8 bytes (776 -> 768) allowing it to fit into one fewer cache lines. Signed-off-by:
Richard Kennedy <richard@rsk.demon.co.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Borislav Petkov authored
Unify identical gcc3.x and gcc4.x macros. Signed-off-by:
Borislav Petkov <borislav.petkov@amd.com> Signed-off-by:
-
Mandeep Singh Baines authored
printk()s without a priority level default to KERN_WARNING. To reduce noise at KERN_WARNING, this patch set the priority level appriopriately for unleveled printks()s. This should be useful to folks that look at dmesg warnings closely. Signed-off-by:
Mandeep Singh Baines <msb@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
FUJITA Tomonori authored
All architectures can use the common dma_addr_t typedef now. We can remove the arch specific dma_addr_t. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Arnd Bergmann <arnd@arndb.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Matt Turner <mattst88@gmail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
Richard Weinberger authored
Commit 6caa76b7 ("tty: now phase out the ioctl file pointer for good") removed the ioctl file pointer. User Mode Linux's line driver uses this ioctl and needs a signature update too. Signed-off-by:
Richard Weinberger <richard@nod.at> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg KH <greg@kroah.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Paul Pluzhnikov authored
One of our users reported that when a user-level program SIGSEGVs under UML kernel, the resulting core dump is not very usable. I have reproduced that with the latest kernel: make ARCH=um defconfig; make ARCH=um Run the resulting kernel, then "inside" run this program: #include <pthread.h> void *fn(void *p) { abort(); } int main() { pthread_t tid; pthread_create(&tid, 0, fn, 0); pthread_join(tid, 0); return 0; } Analyze the coredump with GDB. Here is what you'll see: sudo gdb -q -ex 'set solib-absolute-prefix ../root_fs' -ex 'file ../root_fs/var/tmp/mt-abort' -ex 'core ../root_fs/var/tmp/core.762' Reading symbols from /usr/local/google/root_fs/var/tmp/mt-abort...done. [New Thread 763] [New Thread 762] Core was generated by `./mt-abort'. Program terminated with signal 6, Aborted. #0 0x0000000040255250 in raise () from ../root_fs/lib64/libc.so.6 (gdb) info thread 2 Thread 762 0x0000000000000000 in ?? () * 1 Thread 763 0x0000000040255250 in raise () from ../root_fs/lib64/libc.so.6 Note that thread#2 looks funny. (gdb) thread 2 [Switching to thread 2 (Thread 762)]#0 0x0000000000000000 in ?? () (gdb) info reg rax 0x0 0 rbx 0x0 0 rcx 0x0 0 rdx 0x0 0 rsi 0x0 0 rdi 0x0 0 rbp 0x0 0x0 rsp 0x0 0x0 r8 0x0 0 r9 0x0 0 r10 0x0 0 r11 0x0 0 r12 0x0 0 r13 0x0 0 r14 0x0 0 r15 0x0 0 rip 0x0 0 eflags 0x0 [ ] cs 0x0 0 ss 0x0 0 ds 0x0 0 es 0x0 0 fs 0x0 0 gs 0x0 0 Examining the core shows that NT_PRSTATUS notes for all threads other than the one that crashed are zeroed out. I believe this is happening because neither ELF_CORE_COPY_TASK_REGS nor task_pt_regs are defined under ARCH=um, and so elf_core_copy_task_regs() becomes a no-op. Attached patch fixes this for SUBARCH={x86_64,i386}. Signed-off-by:Paul Pluzhnikov <ppluzhnikov@google.com> Cc: Jeff Dike <jdike@addtoit.com> Acked-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
-
Shaohua Li authored
Clean up code and remove duplicate code. Next patch will use pagevec_lru_move_fn introduced here too. Signed-off-by:
Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Reviewed-by:
Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Hugh Dickins authored
Up to 2.6.22, you could use remap_file_pages(2) on a tmpfs file or a shared mapping of /dev/zero or a shared anonymous mapping. In 2.6.23 we disabled it by default, but set VM_CAN_NONLINEAR to enable it on safe mappings. We made sure to set it in shmem_mmap() for tmpfs files, but missed it in shmem_zero_setup() for the others. Fix that at last. Reported-by:
Kenny Simpson <theonetruekenny@yahoo.com> Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: <stable@kernel.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
Currently memblock_reserve() or memblock_free() don't handle overlaps of any kind. There is some special casing for coalescing exactly adjacent regions but that's about it. This is annoying because typically memblock_reserve() is used to mark regions passed by the firmware as reserved and we all know how much we can trust our firmwares... Also, with the current code, if we do something it doesn't handle right such as trying to memblock_reserve() a large range spanning multiple existing smaller reserved regions for example, or doing overlapping reservations, it can silently corrupt the internal region array, causing odd errors much later on, such as allocations returning reserved regions etc... This patch rewrites the underlying functions that add or remove a region to the arrays. The new code is a lot more robust as it fully handles overlapping regions. It's also, imho, simpler than the previous implementation. In addition, while doing so, I found a bug where if we fail to double the array while adding a region, we would remove the last region of the array rather than the region we just allocated. This fixes it too. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Kirill A. Shutemov authored
Signed-off-by:
Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
-
Namhyung Kim authored
KM_USER1 is never used for vwrite() path so the caller doesn't need to guarantee it is not used. Only the caller should guarantee is KM_USER0 and it is commented already. Signed-off-by:
Namhyung Kim <namhyung@gmail.com> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Jun'ichi Nomura authored
For range-cyclic writeback (e.g. kupdate), the writeback code sets a continuation point of the next writeback to mapping->writeback_index which is set the page after the last written page. This happens so that we evenly write the whole file even if pages in it get continuously redirtied. However, in some cases, sequential writer is writing in the middle of the page and it just redirties the last written page by continuing from that. For example with an application which uses a file as a big ring buffer we see: [1st writeback session] ... flush-8:0-2743 4571: block_bio_queue: 8,0 W 94898514 + 8 flush-8:0-2743 4571: block_bio_queue: 8,0 W 94898522 + 8 flush-8:0-2743 4571: block_bio_queue: 8,0 W 94898530 + 8 flush-8:0-2743 4571: block_bio_queue: 8,0 W 94898538 + 8 flush-8:0-2743 4571: block_bio_queue: 8,0 W 94898546 + 8 kworker/0:1-11 4571: block_rq_issue: 8,0 W 0 () 94898514 + 40 >> flush-8:0-2743 4571: block_bio_queue: 8,0 W 94898554 + 8 >> flush-8:0-2743 4571: block_rq_issue: 8,0 W 0 () 94898554 + 8 [2nd writeback session after 35sec] flush-8:0-2743 4606: block_bio_queue: 8,0 W 94898562 + 8 flush-8:0-2743 4606: block_bio_queue: 8,0 W 94898570 + 8 flush-8:0-2743 4606: block_bio_queue: 8,0 W 94898578 + 8 ... kworker/0:1-11 4606: block_rq_issue: 8,0 W 0 () 94898562 + 640 kworker/0:1-11 4606: block_rq_issue: 8,0 W 0 () 94899202 + 72 ... flush-8:0-2743 4606: block_bio_queue: 8,0 W 94899962 + 8 flush-8:0-2743 4606: block_bio_queue: 8,0 W 94899970 + 8 flush-8:0-2743 4606: block_bio_queue: 8,0 W 94899978 + 8 flush-8:0-2743 4606: block_bio_queue: 8,0 W 94899986 + 8 flush-8:0-2743 4606: block_bio_queue: 8,0 W 94899994 + 8 kworker/0:1-11 4606: block_rq_issue: 8,0 W 0 () 94899962 + 40 >> flush-8:0-2743 4606: block_bio_queue: 8,0 W 94898554 + 8 >> flush-8:0-2743 4606: block_rq_issue: 8,0 W 0 () 94898554 + 8 So we seeked back to 94898554 after we wrote all the pages at the end of the file. This extra seek seems unnecessary. If we continue writeback from the last written page, we can avoid it and do not cause harm to other cases. The original intent of even writeout over the whole file is preserved and if the page does not get redirtied pagevec_lookup_tag() just skips it. As an exceptional case, when I/O error happens, set done_index to the next page as the comment in the code suggests. Tested-by:Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Cesar Eduardo Barros authored
scan_swap_map() is a large function (224 lines), with several loops and a complex control flow involving several gotos. Given all that, it is a bit silly that it is marked as inline. The compiler agrees with me: on a x86-64 compile, it did not inline the function. Remove the "inline" and let the compiler decide instead. Signed-off-by:
Cesar Eduardo Barros <cesarb@cesarb.net> Reviewed-by:
Pekka Enberg <penberg@kernel.org> Reviewed-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by:
-
Cesar Eduardo Barros authored
The block in sys_swapon which does the final adjustments to the swap_info_struct and to swap_list is the same as the block which re-inserts it again at sys_swapoff on failure of try_to_unuse(). Move this code to a separate function, and use it both in sys_swapon and sys_swapoff. Signed-off-by:
Eric B Munson <emunson@mgebm.net> Acked-by:
-
Cesar Eduardo Barros authored
The block in sys_swapon which does the final adjustments to the swap_info_struct and to swap_list is the same as the block which re-inserts it again at sys_swapoff on failure of try_to_unuse(), except for the order of the operations within the lock. Since the order should not matter, arbitrarily change sys_swapoff to match sys_swapon, in preparation to making both share the same code. Signed-off-by:
-
Cesar Eduardo Barros authored
The block in sys_swapon which does the final adjustments to the swap_info_struct and to swap_list is the same as the block which re-inserts it again at sys_swapoff on failure of try_to_unuse(). To be able to make both share the same code, move the printk() call in the middle of it to just after it. Signed-off-by:
-
Cesar Eduardo Barros authored
It still exists within setup_swap_map_and_extents(), but after it nr_good_pages == p->pages. Signed-off-by:
-
Cesar Eduardo Barros authored
Since there is no cleanup to do, there is no reason to jump to a label. Return directly instead. Signed-off-by:
-
Cesar Eduardo Barros authored
Move the code which parses the bad block list and the extents to a separate function. Only code movement, no functional changes. This change uses the fact that, after the success path, nr_good_pages == p->pages. Signed-off-by:
-
Cesar Eduardo Barros authored
The call to swap_cgroup_swapon is in the middle of loading the swap map and extents. As it only does memory allocation and does not depend on the swapfile layout (map/extents), it can be called earlier (or later). Move it to just after the allocation of swap_map, since it is conceptually similar (allocates a map). Signed-off-by:
-
Cesar Eduardo Barros authored
Since there is no cleanup to do, there is no reason to jump to a label. Return directly instead. Signed-off-by:
-
Cesar Eduardo Barros authored
Move the code which parses and checks the swapfile header (except for the bad block list) to a separate function. Only code movement, no functional changes. Signed-off-by:
-
Cesar Eduardo Barros authored
There is no reason I can see to read inode->i_size long before it is needed. Move its read to just before it is needed, to reduce the variable lifetime. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Reviewed-by:
-
Cesar Eduardo Barros authored
Since there is no cleanup to do, there is no reason to jump to a label. Return directly instead. Signed-off-by:
-
Cesar Eduardo Barros authored
Move the code which claims the bdev (S_ISBLK) or locks the inode (S_ISREG) to a separate function. Only code movement, no functional changes. Signed-off-by:
-
Cesar Eduardo Barros authored
sys_swapon currently has two error labels, bad_swap and bad_swap_2. bad_swap does the same as bad_swap_2 plus destroy_swap_extents() and swap_cgroup_swapoff(); both are noops in the places where bad_swap_2 is jumped to. With a single extra test for inode (matching the one in the S_ISREG case below), all the error paths in the function can go to bad_swap. Signed-off-by:
-
Cesar Eduardo Barros authored
The only way error is 0 in the cleanup blocks is when the function is returning successfully. In this case, the cleanup blocks were setting S_SWAPFILE in the S_ISREG case. But this is not a cleanup. Move the setting of S_SWAPFILE to just before the "goto out;" to make this more clear. At this point, we do not need to test for inode because it will never be NULL. Signed-off-by:
-
Cesar Eduardo Barros authored
The bdev variable is always equivalent to (S_ISBLK(inode->i_mode) ? p->bdev : NULL), as long as it being set is moved to a bit earlier. Use this fact to remove the bdev variable. Signed-off-by:
-
Cesar Eduardo Barros authored
Move the setting of the error variable nearer the goto in a few places. Avoids calling PTR_ERR() if not IS_ERR() in two places, and makes the error condition more explicit in two other places. Signed-off-by:
-
