- 22 Jan, 2022 7 commits
-
-
John Garry authored
Add a test for aliases with hyphens in the name to ensure that the pmu-events tables are as expects. There should be no reason why these sort of aliases would be treated differently, but no harm in checking. Signed-off-by:
John Garry <john.garry@huawei.com> Acked-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1642432215-234089-3-git-send-email-john.garry@huawei.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
John Garry authored
Event aliasing for events whose name in the form foo-bar-baz is not supported, while foo-bar, foo_bar_baz, and other combinations are, i.e. two hyphens are not supported. The HiSilicon D06 platform has events in such form: $ ./perf list sdir-home-migrate List of pre-defined events (to be used in -e): uncore hha: sdir-home-migrate [Unit: hisi_sccl,hha] $ sudo ./perf stat -e sdir-home-migrate event syntax error: 'sdir-home-migrate' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event>event selector. use 'perf list' to list available events To support, add an extra PMU event symbol type for "baz", and add a new rule in the bison file. Signed-off-by:
John Garry <john.garry@huawei.com> Acked-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1642432215-234089-2-git-send-email-john.garry@huawei.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
German Gomez authored
A previous patch preventing "attr->sample_period" values from being overridden in pfm events changed a related behaviour in arm-spe. Before said patch: perf record -c 10000 -e arm_spe_0// -- sleep 1 Would yield an SPE event with period=10000. After the patch, the period in "-c 10000" was being ignored because the arm-spe code initializes sample_period to a non-zero value. This patch restores the previous behaviour for non-libpfm4 events. Fixes: ae5dcc8a (“perf record: Prevent override of attr->sample_period for libpfm4 events”) Reported-by:
Chase Conklin <chase.conklin@arm.com> Signed-off-by:
German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Lv Ruyi authored
Remove all but the first include of stdbool.h from cpumap.h. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220117083730.863200-1-lv.ruyi@zte.com.cnSigned-off-by:
CGEL ZTE <cgel.zte@gmail.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ian Rogers authored
Switch from directly accessing the perf_cpu_map to using the appropriate libperf API when possible. Using the API simplifies the job of refactoring use of perf_cpu_map. Signed-off-by:
Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: André Almeida <andrealmeid@collabora.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: German Gomez <german.gomez@arm.com> Cc: James Clark <james.clark@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Song Liu <song@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yury Norov <yury.norov@gmail.com> Link: http://lore.kernel.org/lkml/20220122045811.3402706-3-irogers@google.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ian Rogers authored
Value should be built as an integer. Switch some uses of perf_cpu_map to use the library API. Fixes: 6d18804b ("perf cpumap: Give CPUs their own type") Signed-off-by:
Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: André Almeida <andrealmeid@collabora.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Song Liu <song@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yury Norov <yury.norov@gmail.com> Link: http://lore.kernel.org/lkml/20220122045811.3402706-2-irogers@google.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Yao Jin authored
Perf script was failed to print the phys_addr for SPE profiling. One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR attribute set, perf script then exits with error. Now referring to 'addr', use evsel__do_check_stype() to check the type. Before: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field. After: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr 4064384/4064384 ffff802f921be0d0 2f921be0d0 4064384/4064384 ffff802f921be0d0 2f921be0d0 Reviewed-by:
German Gomez <german.gomez@arm.com> Signed-off-by:
Yao Jin <jinyao5@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.comSigned-off-by:
Wei Li <liwei391@huawei.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 20 Jan, 2022 1 commit
-
-
Arnaldo Carvalho de Melo authored
To pick the changes in these csets: 21b084fd ("mm/mempolicy: wire up syscall set_mempolicy_home_node") That add support for this new syscall in tools such as 'perf trace'. For instance, this is now possible: [root@five ~]# perf trace -e set_mempolicy_home_node ^C[root@five ~]# [root@five ~]# perf trace -v -e set_mempolicy_home_node Using CPUID AuthenticAMD-25-21-0 event qualifier tracepoint filter: (common_pid != 253729 && common_pid != 3585) && (id == 450) mmap size 528384B ^C[root@five ~] [root@five ~]# perf trace -v -e set* --max-events 5 Using CPUID AuthenticAMD-25-21-0 event qualifier tracepoint filter: (common_pid != 253734 && common_pid != 3585) && (id == 38 || id == 54 || id == 105 || id == 106 || id == 109 || id == 112 || id == 113 || id == 114 || id == 116 || id == 117 || id == 119 || id == 122 || id == 123 || id == 141 || id == 160 || id == 164 || id == 170 || id == 171 || id == 188 || id == 205 || id == 218 || id == 238 || id == 273 || id == 308 || id == 450) mmap size 528384B 0.000 ( 0.008 ms): bash/253735 setpgid(pid: 253735 (bash), pgid: 253735 (bash)) = 0 6849.011 ( 0.008 ms): bash/16046 setpgid(pid: 253736 (bash), pgid: 253736 (bash)) = 0 6849.080 ( 0.005 ms): bash/253736 setpgid(pid: 253736 (bash), pgid: 253736 (bash)) = 0 7437.718 ( 0.009 ms): gnome-shell/253737 set_robust_list(head: 0x7f34b527e920, len: 24) = 0 13445.986 ( 0.010 ms): bash/16046 setpgid(pid: 253738 (bash), pgid: 253738 (bash)) = 0 [root@five ~]# That is the filter expression attached to the raw_syscalls:sys_{enter,exit} tracepoints. $ find tools/perf/arch/ -name "syscall*tbl" | xargs grep -w set_mempolicy_home_node tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl:450 common set_mempolicy_home_node sys_set_mempolicy_home_node tools/perf/arch/powerpc/entry/syscalls/syscall.tbl:450 nospu set_mempolicy_home_node sys_set_mempolicy_home_node tools/perf/arch/s390/entry/syscalls/syscall.tbl:450 common set_mempolicy_home_node sys_set_mempolicy_home_node sys_set_mempolicy_home_node tools/perf/arch/x86/entry/syscalls/syscall_64.tbl:450 common set_mempolicy_home_node sys_set_mempolicy_home_node $ $ grep -w set_mempolicy_home_node /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c [450] = "set_mempolicy_home_node", $ This addresses these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h' diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl' diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl' diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl' diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 19 Jan, 2022 2 commits
-
-
Arnaldo Carvalho de Melo authored
To pick the changes in this cset: 980fe2fd ("x86/fpu: Extend fpu_xstate_prctl() with guest permissions") This picks these new prctls: $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/before $ cp arch/x86/include/uapi/asm/prctl.h tools/arch/x86/include/uapi/asm/prctl.h $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/after $ diff -u /tmp/before /tmp/after --- /tmp/before 2022-01-19 14:40:05.049394977 -0300 +++ /tmp/after 2022-01-19 14:40:35.628154565 -0300 @@ -9,6 +9,8 @@ [0x1021 - 0x1001]= "GET_XCOMP_SUPP", [0x1022 - 0x1001]= "GET_XCOMP_PERM", [0x1023 - 0x1001]= "REQ_XCOMP_PERM", + [0x1024 - 0x1001]= "GET_XCOMP_GUEST_PERM", + [0x1025 - 0x1001]= "REQ_XCOMP_GUEST_PERM", }; #define x86_arch_prctl_codes_2_offset 0x2001 $ With this 'perf trace' can translate those numbers into strings and use the strings in filter expressions: # perf trace -e prctl 0.000 ( 0.011 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9c014b7df5) = 0 0.032 ( 0.002 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9bb6b51580) = 0 5.452 ( 0.003 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfeb70) = 0 5.468 ( 0.002 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfea70) = 0 24.494 ( 0.009 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f562a32ae28) = 0 24.540 ( 0.002 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f563c6d4b30) = 0 670.281 ( 0.008 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30805c8) = 0 670.293 ( 0.002 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30800f0) = 0 ^C# This addresses these perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/prctl.h' differs from latest version at 'arch/x86/include/uapi/asm/prctl.h' diff -u tools/arch/x86/include/uapi/asm/prctl.h arch/x86/include/uapi/asm/prctl.h Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Its more intention revealing, and if we're interested in the odd cases where this may end up truncating we can do debug checks at one centralized place. Motivation, of all the container builds, fedora rawhide started complaining of: util/machine.c: In function ‘machine__create_modules’: util/machine.c:1419:50: error: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 0 and 4095 [-Werror=format-truncation=] 1419 | snprintf(path, sizeof(path), "%s/%s", dir_name, dent->d_name); | ^~ In file included from /usr/include/stdio.h:894, from util/branch.h:9, from util/callchain.h:8, from util/machine.c:7: In function ‘snprintf’, inlined from ‘maps__set_modules_path_dir’ at util/machine.c:1419:3, inlined from ‘machine__set_modules_path’ at util/machine.c:1473:9, inlined from ‘machine__create_modules’ at util/machine.c:1519:7: /usr/include/bits/stdio2.h:71:10: note: ‘__builtin___snprintf_chk’ output between 2 and 4352 bytes into a destination of size 4096 There are other places where we should use path__join(), but lets get rid of this one first. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Acked-by:
Ian Rogers <irogers@google.com> Link: Link: https://lore.kernel.org/r/YebZKjwgfdOz0lAs@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 18 Jan, 2022 17 commits
-
-
Arnaldo Carvalho de Melo authored
When the target is a pid, not started by 'perf stat' we need to disable the events, and in that case there is no need to setup affinities as we use a dummy CPU map, with just one entry set to -1. So stop doing it to avoid this needless call to sched_getaffinity(): # strace -ke sched_getaffinity perf stat -e cycles -p 241957 sleep 1 <SNIP> sched_getaffinity(0, 512, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]) = 8 > /usr/lib64/libc-2.33.so(sched_getaffinity@@GLIBC_2.3.4+0x1a) [0xe6eea] > /var/home/acme/bin/perf(affinity__setup+0x6a) [0x532a2a] > /var/home/acme/bin/perf(__evlist__disable.constprop.0+0x27) [0x4b9827] > /var/home/acme/bin/perf(cmd_stat+0x29b5) [0x431725] > /var/home/acme/bin/perf(run_builtin+0x6a) [0x4a2cfa] > /var/home/acme/bin/perf(main+0x612) [0x40f8c2] > /usr/lib64/libc-2.33.so(__libc_start_main+0xd4) [0x27b74] > /var/home/acme/bin/perf(_start+0x2d) [0x40fadd] <SNIP> Acked-by:
Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220117160931.1191712-5-acme@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
When the target is a pid, not started by 'perf stat' we need to enable the events, and in that case there is no need to setup affinities as we use a dummy CPU map, with just one entry set to -1. So stop doing it to avoid this needless call to sched_getaffinity(): # strace -ke sched_getaffinity perf stat -e cycles -p 241957 sleep 1 <SNIP> sched_getaffinity(0, 512, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]) = 8 > /usr/lib64/libc-2.33.so(sched_getaffinity@@GLIBC_2.3.4+0x1a) [0xe6eea] > /var/home/acme/bin/perf(affinity__setup+0x6a) [0x5329ca] > /var/home/acme/bin/perf(__evlist__enable.constprop.0+0x23) [0x4b9693] > /var/home/acme/bin/perf(enable_counters+0x14d) [0x42de5d] > /var/home/acme/bin/perf(cmd_stat+0x2358) [0x4310c8] > /var/home/acme/bin/perf(run_builtin+0x6a) [0x4a2cfa] > /var/home/acme/bin/perf(main+0x612) [0x40f8c2] > /usr/lib64/libc-2.33.so(__libc_start_main+0xd4) [0x27b74] > /var/home/acme/bin/perf(_start+0x2d) [0x40fadd] <SNIP> Acked-by:
Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220117160931.1191712-4-acme@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
I.e. the simple: $ perf stat sleep 1 Uses a dummy CPU map and thus there is no need to setup/cleanup affinities to avoid IPIs, etc. With this we're down to a sched_getaffinity() call, in the libnuma initialization, that probably can be removed in a followup patch. Acked-by:
Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220117160931.1191712-3-acme@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Just like with free(), NULL is checked to avoid having all callers do it. Its convenient for when not using affinity setup/cleanup for dummy CPU maps, i.e. CPU maps for pid targets. Acked-by:
Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220117160931.1191712-2-acme@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Zechuan Chen authored
Because of commit bf794bf5 ("powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2"), in ppc64 ABIv1, our perf command eliminates the need to use the prefix "." at the symbol name. But when the command "perf probe -a schedule" is executed on ppc64 ABIv1, it obtains two symbol address information through /proc/kallsyms, for example: cat /proc/kallsyms | grep -w schedule c000000000657020 T .schedule c000000000d4fdb8 D schedule The symbol "D schedule" is not a function symbol, and perf will print: "p:probe/schedule _text+13958584"Failed to write event: Invalid argument Therefore, when searching symbols from map and adding probe point for them, a symbol type check is added. If the type of symbol is not a function, skip it. Fixes: bf794bf5 ("powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2") Signed-off-by:
Zechuan Chen <chenzechuan1@huawei.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jianlin Lv <Jianlin.Lv@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Yang Jihong <yangjihong1@huawei.com> Link: https://lore.kernel.org/r/20211228111338.218602-1-chenzechuan1@huawei.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengineLinus Torvalds authored
Pull dmaengine updates from Vinod Koul: "A bunch of new support and few updates to drivers: New support: - DMA_MEMCPY_SG support is bought back as we have a user in Xilinx driver - Support for TI J721S2 SoC in k3-udma driver - Support for Ingenic MDMA and BDMA in the JZ4760 - Support for Renesas r8a779f0 dmac Updates: - We are finally getting rid of slave_id, so this brings in the changes across tree for that - updates for idxd driver - at_xdmac driver cleanup" * tag 'dmaengine-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (60 commits) dt-bindings: dma-controller: Split interrupt fields in example dmaengine: pch_dma: Remove usage of the deprecated "pci-dma-compat.h" API dmaengine: at_xdmac: Fix race over irq_status dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_tasklet() dmaengine: at_xdmac: Fix at_xdmac_lld struct definition dmaengine: at_xdmac: Fix lld view setting dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_advance_work() dmaengine: at_xdmac: Fix concurrency over xfers_list dmaengine: at_xdmac: Move the free desc to the tail of the desc list dmaengine: at_xdmac: Fix race for the tx desc callback dmaengine: at_xdmac: Fix concurrency over chan's completed_cookie dmaengine: at_xdmac: Print debug message after realeasing the lock dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending dmaengine: at_xdmac: Don't start transactions at tx_submit level dmaengine: idxd: deprecate token sysfs attributes for read buffers dmaengine: idxd: change bandwidth token to read buffers dmaengine: idxd: fix wq settings post wq disable dmaengine: idxd: change MSIX allocation based on per wq activation dmaengine: idxd: fix descriptor flushing locking dmaengine: idxd: embed irq_entry in idxd_wq struct ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ATA updates from Damien Le Moal: "A larger than usual set of changes for this cycle. The bulk of the changes are part of a rework of libata messages and debugging features from Hannes. In more detail, the changes are as follows. - Small code cleanups in the pata_ali driver (unnecessary variable initialization and simplified return statement, from Jason and Colin. - Switch to using struct_group() in the sata_fsl driver, from Kees. - Convert many sysfs attribute show functions to use sysfs_emit() instead of snprintf(), from me. - sata_dwc_460ex driver code cleanups, from Andy. - Improve DMA setup and remove superfluous error message in libahci_platform, from Andy - A small code cleanup in libata to use min() instead of open coding test, from Changcheng. - Rework of libata messages from Hannes. This is especially focused on replacing compile time defined debugging messages (DPRINTK() and VPRINTK()) with regular dynamic debugging messages (pr_debug()) and traceipoint events. Both libata-core and many drivers are updated to have a consistent debugging level control for all drivers. - Extend compile test support to as many drivers as possible in ATA Kconfig to improve compile test coverage, from me. - Fixes to avoid compile time warnings (W=1) and sparse warnings in sata_fsl and ahci_xgene drivers, from me. - Fix the interface of the read_id() port operation method to clarify that the data buffer passed as an argument is little endian. This avoids sparse warnings in the pata_netcell, pata_it821x, ahci_xgene, ahci_cevaxi and ahci_brcm drivers. From me. - Small code cleanup in the pata_octeon_cf driver, from Minghao. - Improved IRQ configuration code in pata_of_platform, from Lad. - Simplified implementation of __ata_scsi_queuecmd(), from Wenchao. - Debounce delay flag renaming, from Paul. - Add support for AMD A85 FCH (Hudson D4) AHCI adapters, from Paul" * tag 'ata-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (106 commits) ata: pata_ali: remove redundant return statement ata: ahci: Add support for AMD A85 FCH (Hudson D4) ata: libata: Rename link flag ATA_LFLAG_NO_DB_DELAY ata: libata-scsi: simplify __ata_scsi_queuecmd() ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt ata: pata_samsung_cf: add compile test support ata: pata_pxa: add compile test support ata: pata_imx: add compile test support ata: pata_ftide010: add compile test support ata: pata_cs5535: add compile test support ata: pata_octeon_cf: remove redundant val variable ata: fix read_id() ata port operation interface ata: ahci_xgene: use correct type for port mmio address ata: sata_fsl: fix cmdhdr_tbl_entry and prde struct definitions ata: sata_fsl: fix scsi host initialization ata: pata_bk3710: add compile test support ata: ahci_seattle: add compile test support ata: ahci_xgene: add compile test support ata: ahci_tegra: add compile test support ata: ahci_sunxi: add compile test support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio updates from Michael Tsirkin: "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes. - partial support for < MAX_ORDER - 1 granularity for virtio-mem - driver_override for vdpa - sysfs ABI documentation for vdpa - multiqueue config support for mlx5 vdpa - and misc fixes, cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits) vdpa/mlx5: Fix tracking of current number of VQs vdpa/mlx5: Fix is_index_valid() to refer to features vdpa: Protect vdpa reset with cf_mutex vdpa: Avoid taking cf_mutex lock on get status vdpa/vdpa_sim_net: Report max device capabilities vdpa: Use BIT_ULL for bit operations vdpa/vdpa_sim: Configure max supported virtqueues vdpa/mlx5: Report max device capabilities vdpa: Support reporting max device capabilities vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps() vdpa: Add support for returning device configuration information vdpa/mlx5: Support configuring max data virtqueue vdpa/mlx5: Fix config_attr_mask assignment vdpa: Allow to configure max data virtqueues vdpa: Read device configuration only if FEATURES_OK vdpa: Sync calls set/get config/status with cf_mutex vdpa/mlx5: Distribute RX virtqueues in RQT object vdpa: Provide interface to read driver features vdpa: clean up get_config_size ret value handling virtio_ring: mark ring unused on error ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linuxLinus Torvalds authored
Pull remoteproc updates from Bjorn Andersson: "This introduces support for controlling the Cortex R7 co-processor in Renesas Gen3, support for R5F clusters and C71x DSPs on TI J721S2 and compute, audio and modem subsystems on Qualcomm SM6350. It fixes a couple of sparse errors related to memcpy_to/fromio and corrects the kerneldoc spelling of "Return:". The stm32 driver no longer attempts to communicate with the remote after the firmware has crashed" * tag 'rproc-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits) remoteproc: stm32: Improve crash recovery time remoteproc: rcar_rproc: Remove trailing semicolon remoteproc: rcar_rproc: Fix pm_runtime_get_sync error check remoteproc: qcom: pas: Add SM6350 CDSP support remoteproc: qcom: pas: Add SM6350 ADSP support remoteproc: qcom: pas: Add SM6350 MPSS support dt-bindings: remoteproc: qcom: pas: Add SM6350 adsp, cdsp & mpss remoteproc: qcom: pas: Add missing power-domain "mxc" for CDSP remoteproc: imx_rproc: correct firmware reload remoteproc: qcom: pil_info: Don't memcpy_toio more than is provided remoteproc: Add Renesas rcar driver dt-bindings: remoteproc: Add Renesas R-Car remoteproc: Fix remaining wrong return formatting in documentation MAINTAINERS: Removing Ohad from remoteproc/rpmsg maintenance remoteproc: ingenic: Request IRQ disabled remoteproc: k3-r5: Extend support for R5F clusters on J721S2 SoCs remoteproc: k3-dsp: Extend support for C71x DSPs on J721S2 SoCs dt-bindings: remoteproc: k3-dsp: Update bindings for J721S2 SoCs dt-bindings: remoteproc: k3-r5f: Update bindings for J721S2 SoCs remoteproc: coredump: Correct argument 2 type for memcpy_fromio ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linuxLinus Torvalds authored
Pull rpmsg updates from Bjorn Andersson: "This adds pr_fmt for the rpmsg_char driver, fixes error handling in rpmsg_dev_probe() and corrects the spelling of "Return:" in various places, in order to fix kerneldoc" * tag 'rpmsg-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: rpmsg: core: Clean up resources on announce_create failure. rpmsg: Fix documentation return formatting rpmsg: char: Add pr_fmt() to prefix messages
-
Jamie Hill-Daniel authored
The "PAGE_SIZE - 2 - size" calculation in legacy_parse_param() is an unsigned type so a large value of "size" results in a high positive value instead of a negative value as expected. Fix this by getting rid of the subtraction. Signed-off-by:
Jamie Hill-Daniel <jamie@hill-daniel.co.uk> Signed-off-by:
William Liu <willsroot@protonmail.com> Tested-by:
Salvatore Bonaccorso <carnil@debian.org> Tested-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more power management updates from Rafael Wysocki: "This is a continuation of the rework of device power management macros used for declaring device power management callbacks (Paul Cercueil)" * tag 'pm-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: iio: pressure: bmp280: Use new PM macros PM: runtime: Add EXPORT[_GPL]_RUNTIME_DEV_PM_OPS macros PM: runtime: Add DEFINE_RUNTIME_DEV_PM_OPS() macro PM: core: Add EXPORT[_GPL]_SIMPLE_DEV_PM_OPS macros PM: core: Remove static qualifier in DEFINE_SIMPLE_DEV_PM_OPS macro PM: core: Remove DEFINE_UNIVERSAL_DEV_PM_OPS() macro
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more ACPI updates from Rafael Wysocki: "The most significant item here is the Platform Firmware Runtime Update and Telemetry (PFRUT) support designed to allow certain pieces of the platform firmware to be updated on the fly, among other things. Also important is the e820 handling change on x86 that should work around PCI BAR allocation issues on some systems shipping since 2019. The rest is just a handful of assorted fixes and cleanups on top of the ACPI material merged previously. Specifics: - Add support for the the Platform Firmware Runtime Update and Telemetry (PFRUT) interface based on ACPI to allow certain pieces of the platform firmware to be updated without restarting the system and to provide a mechanism for collecting platform firmware telemetry data (Chen Yu, Dan Carpenter, Yang Yingliang). - Ignore E820 reservations covering PCI host bridge windows on sufficiently recent x86 systems to avoid issues with allocating PCI BARs on systems where the E820 reservations cover the entire PCI host bridge memory window returned by the _CRS object in the system's ACPI tables (Hans de Goede). - Fix and clean up acpi_scan_init() (Rafael Wysocki). - Add more sanity checking to ACPI SPCR tables parsing (Mark Langsdorf). - Fix up ACPI APD (AMD Soc) driver initialization (Jiasheng Jiang). - Drop unnecessary "static" from the ACPI PCC address space handling driver added recently (kernel test robot)" * tag 'acpi-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PCC: pcc_ctx can be static ACPI: scan: Rename label in acpi_scan_init() ACPI: scan: Simplify initialization of power and sleep buttons ACPI: scan: Change acpi_scan_init() return value type to void ACPI: SPCR: check if table->serial_port.access_width is too wide ACPI: APD: Check for NULL pointer after calling devm_ioremap() x86/PCI: Ignore E820 reservations for bridge windows on newer systems ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl() ACPI: pfr_update: Fix return value check in pfru_write() ACPI: tools: Introduce utility for firmware updates/telemetry ACPI: Introduce Platform Firmware Runtime Telemetry driver ACPI: Introduce Platform Firmware Runtime Update device driver efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures
-
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slabLinus Torvalds authored
Pull more slab updates from Vlastimil Babka: "Finish the conversion to struct slab by removing slab-specific fields from struct page. The first slab update (see merge commit ca1a46d6) did most of the conversion, but there was also series in iommu tree removing the iommu's usage of struct page 'freelist' field, blocking the final struct page cleanup. Now that the iommu changes have been merged, we can finish the job" * tag 'slab-for-5.17-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm: Remove slab from struct page
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: "Nothing too exciting for now" * tag 'arc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arc: use swap() to make code cleaner arc: perf: Move static structs to where they're really used ARC: perf: fix misleading comment about pmu vs counter stop arc: Replace lkml.org links with lore ARC: perf: Remove redundant initialization of variable idx ARC: thread_info.h: correct two typos in a comment
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.17-2022-01-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool updates from Arnaldo Carvalho de Melo: "New features: - Add 'trace' subcommand for 'perf ftrace', setting the stage for more 'perf ftrace' subcommands. Not using a subcommand yields the previous behaviour of 'perf ftrace'. - Add 'latency' subcommand to 'perf ftrace', that can use the function graph tracer or a BPF optimized one, via the -b/--use-bpf option. E.g.: $ sudo perf ftrace latency -a -T mutex_lock sleep 1 # DURATION | COUNT | GRAPH | 0 - 1 us | 4596 | ######################## | 1 - 2 us | 1680 | ######### | 2 - 4 us | 1106 | ##### | 4 - 8 us | 546 | ## | 8 - 16 us | 562 | ### | 16 - 32 us | 1 | | 32 - 64 us | 0 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | The original implementation of this command was in the bcc tool. - Support --cputype option for hybrid events in 'perf stat'. Improvements: - Call chain improvements for ARM64. - No need to do any affinity setup when profiling pids. - Reduce multiplexing with duration_time in 'perf stat' metrics. - Improve error message for uncore events, stating that some event groups are can only be used in system wide (-a) mode. - perf stat metric group leader fixes/improvements, including arch specific changes to better support Intel topdown events. - Probe non-deprecated sysfs path first, i.e. try the path /sys/devices/system/cpu/cpuN/topology/thread_siblings first, then the old /sys/devices/system/cpu/cpuN/topology/core_cpus. - Disable debuginfod by default in 'perf record', to avoid stalls on distros such as Fedora 35. - Use unbuffered output in 'perf bench' when pipe/tee'ing to a file. - Enable ignore_missing_thread in 'perf trace' Fixes: - Avoid TUI crash when navigating in the annotation of recursive functions. - Fix hex dump character output in 'perf script'. - Fix JSON indentation to 4 spaces standard in the ARM vendor event files. - Fix use after free in metric__new(). - Fix IS_ERR_OR_NULL() usage in the perf BPF loader. - Fix up cross-arch register support, i.e. when printing register names take into account the architecture where the perf.data file was collected. - Fix SMT fallback with large core counts. - Don't lower case MetricExpr when parsing JSON files so as not to lose info such as the ":G" event modifier in metrics. perf test: - Add basic stress test for sigtrap handling to 'perf test'. - Fix 'perf test' failures on s/390 - Enable system wide for metricgroups test in 'perf test´. - Use 3 digits for test numbering now we can have more tests. Arch specific: - Add events for Arm Neoverse N2 in the ARM JSON vendor event files - Support PERF_MEM_LVLNUM encodings in powerpc, that came from a single patch series, where I incorrectly merged the kernel bits, that were then reverted after coordination with Michael Ellerman and Stephen Rothwell. - Add ARM SPE total latency as PERF_SAMPLE_WEIGHT. - Update AMD documentation, with info on raw event encoding. - Add support for global and local variants of the "p_stage_cyc" sort key, applicable to perf.data files collected on powerpc. - Remove duplicate and incorrect aux size checks in the ARM CoreSight ETM code. Refactorings: - Add a perf_cpu abstraction to disambiguate CPUs and CPU map indexes, fixing problems along the way. - Document CPU map methods. UAPI sync: - Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy' - Sync UAPI files with the kernel sources: drm, msr-index, cpufeatures. Build system - Enable warnings through HOSTCFLAGS. - Drop requirement for libstdc++.so for libopencsd check libperf: - Make libperf adopt perf_counts_values__scale() from tools/perf/util/. - Add a stat multiplexing test to libperf" * tag 'perf-tools-for-v5.17-2022-01-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (115 commits) perf record: Disable debuginfod by default perf evlist: No need to do any affinity setup when profiling pids perf cpumap: Add is_dummy() method perf metric: Fix metric_leader perf cputopo: Fix CPU topology reading on s/390 perf metricgroup: Fix use after free in metric__new() libperf tests: Update a use of the new cpumap API perf arm: Fix off-by-one directory path tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Update tools's copy of drm.h header tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy' perf pmu-events: Don't lower case MetricExpr perf expr: Add debug logging for literals perf tools: Probe non-deprecated sysfs path 1st perf tools: Fix SMT fallback with large core counts perf cpumap: Give CPUs their own type perf stat: Correct first_shadow_cpu to return index perf script: Fix flipped index and cpu perf c2c: Use more intention revealing iterator ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linuxLinus Torvalds authored
Pull orangefs fixes from Mike Marshall: "Two fixes: - Fix the size of a memory allocation in orangefs_bufmap_alloc() (Christophe JAILLET) - Use default_groups in kobj_type (Greg KH)" * tag 'for-linus-5.17-ofs-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: Fix the size of a memory allocation in orangefs_bufmap_alloc() orangefs: use default_groups in kobj_type
-
- 17 Jan, 2022 13 commits
-
-
Rafael J. Wysocki authored
Merge support for the Platform Firmware Runtime Update and Telemetry interface based on ACPI. The interface provided here allows updating certain pieces of the platform firmware without restarting the system and collecting platform firmware telemetry data. This also includes a utility for accesing the new interface from user space. * acpi-pfrut: ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl() ACPI: pfr_update: Fix return value check in pfru_write() ACPI: tools: Introduce utility for firmware updates/telemetry ACPI: Introduce Platform Firmware Runtime Telemetry driver ACPI: Introduce Platform Firmware Runtime Update device driver efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures
-
Rafael J. Wysocki authored
Merge additional ACPI-related updates for 5.17-rc1: - Ignore E820 reservations covering PCI host bridge windows on sufficiently recent x86 systems to avoid issues with allocating PCI BARs on systems where the E820 reservations cover the entire PCI host bridge memory window returned by the _CRS object in the system's ACPI tables (Hans de Goede). - Add more sanity checking to ACPI SPCR tables parsing (Mark Langsdorf). - Fix up ACPI APD (AMD Soc) driver initialization (Jiasheng Jiang). - Drop unnecessary "static" from the ACPI PCC address space handling driver added recently (kernel test robot). * acpi-x86: x86/PCI: Ignore E820 reservations for bridge windows on newer systems * acpi-tables: ACPI: SPCR: check if table->serial_port.access_width is too wide * acpi-soc: ACPI: APD: Check for NULL pointer after calling devm_ioremap() * acpi-pcc: ACPI: PCC: pcc_ctx can be static
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs updates from Steve French: - multichannel patches mostly related to improving reconnect behavior - minor cleanup patches * tag '5.17-rc-part1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix FILE_BOTH_DIRECTORY_INFO definition cifs: move superblock magic defitions to magic.h cifs: Fix smb311_update_preauth_hash() kernel-doc comment cifs: avoid race during socket reconnect between send and recv cifs: maintain a state machine for tcp/smb/tcon sessions cifs: fix hang on cifs_get_next_mid() cifs: take cifs_tcp_ses_lock for status checks cifs: reconnect only the connection and not smb session where possible cifs: add WARN_ON for when chan_count goes below minimum cifs: adjust DebugData to use chans_need_reconnect for conn status cifs: use the chans_need_reconnect bitmap for reconnect status cifs: track individual channel status using chans_need_reconnect cifs: remove redundant assignment to pointer p
-
NeilBrown authored
Prior to Linux v5.4 devtmpfs used mount_single() which treats the given mount options as "remount" options, so it updates the configuration of the single super_block on each mount. Since that was changed, the mount options used for devtmpfs are ignored. This is a regression which affect systemd - which mounts devtmpfs with "-o mode=755,size=4m,nr_inodes=1m". This patch restores the "remount" effect by calling reconfigure_single() Fixes: d401727e ("devtmpfs: don't mix {ramfs,shmem}_fill_super() with mount_single()") Acked-by:
Christian Brauner <christian.brauner@ubuntu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev maintainership update from Helge Deller: "The fbdev layer is orphaned, but seems to need some care. So I'd like to step up as new maintainer" * tag 'fbdev-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: MAINTAINERS: Add Helge as fbdev maintainer
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: "Updates to Goodix touchscreen driver (addition of pen support) and Silead touchscreen driver (also addition of pen support and parsing of embedded firmware to determine screen size), along with assorted fixes for other drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ti_am335x_tsc - fix a typo in a comment Input: zinitix - add compatible for bt532 Input: zinitix - handle proper supply names dt-bindings: input/ts/zinitix: Convert to YAML, fix and extend Input: axp20x-pek - revert "always register interrupt handlers" change Input: gpio-keys - avoid clearing twice some memory Input: byd - fix typo in a comment Input: ucb1400_ts - remove redundant variable penup Input: ti_am335x_tsc - lower the X and Y sampling time Input: ti_am335x_tsc - fix STEPCONFIG setup for Z2 Input: ti_am335x_tsc - set ADCREFM for X configuration Input: silead - add pen support Input: silead - add support for EFI-embedded fw using different min/max coordinates Input: goodix - 2 small fixes for pen support Input: goodix - improve gpiod_get() error logging Input: goodix - add pen support Input: ff-core - correct magnitude setting for rumble compatibility Input: palmas-pwrbutton - make a couple of arrays static const Input: wacom_i2c - clean up the query device fields Input: palmas-pwrbutton - use bitfield helpers
-
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxLinus Torvalds authored
Pull i3c updates from Alexandre Belloni: "Mostly non urgent fixes and a few improvements (including runtime pm suport) to the Silvaco driver" * tag 'i3c/for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: master: dw: check return of dw_i3c_master_get_free_pos() i3c: master: mipi-i3c-hci: correct the config reference for endianness i3c: master: svc: enable the interrupt in the enable ibi function i3c: master: svc: add the missing module device table i3c: master: svc: add runtime pm support i3c: master: svc: set ODSTOP to let I2C device see the STOP signal i3c: master: svc: add support for slave to stop returning data i3c: master: svc: separate err, fifo and disable interrupt of reset function i3c: master: svc: fix atomic issue i3c: master: svc: move module reset behind clk enable i3c/master/mipi-i3c-hci: Fix a potentially infinite loop in 'hci_dat_v1_get_index()' i3c: fix incorrect address slot lookup on 64-bit i3c/master/mipi-i3c-hci: Prefer kcalloc over open coded arithmetic i3c/master/mipi-i3c-hci: Prefer struct_size over open coded arithmetic
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "New AMD PCI ID for NTB, and a number of bug fixes for ntb_hw_switchtec for Linux v5.17" * tag 'ntb-5.17' of git://github.com/jonmason/ntb: ntb_hw_switchtec: Fix a minor issue in config_req_id_table() ntb_hw_switchtec: Remove code for disabling ID protection ntb_hw_switchtec: Update the way of getting VEP instance ID ntb_hw_switchtec: AND with the part_map for a valid tpart_vec ntb_hw_switchtec: Fix bug with more than 32 partitions ntb_hw_switchtec: Fix pff ioread to read into mmio_part_cfg_all ntb_hw_switchtec: fix the spelling of "its" NTB/msi: Fix ntbm_msi_request_threaded_irq() kernel-doc comment ntb_hw_amd: Add NTB PCI ID for new gen CPU
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: - New device support: - Watchdog Timer driver for RZ/G2L - Realtek Otto watchdog timer - Apple SoC watchdog driver - Fintek F81966 - Remove BCM63XX_WDT after support for this SoC was added to BCM7038_WDT - Improvements of the BCM7038_WDT and s3c2410_wdt code - Several other fixes and improvements * tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: (38 commits) watchdog: msc313e: Check if the WDT was running at boot watchdog: Add Apple SoC watchdog driver dt-bindings: watchdog: Add SM6350 and SM8250 compatible watchdog: s3c2410: Fix getting the optional clock watchdog: s3c2410: Use platform_get_irq() to get the interrupt dt-bindings: watchdog: atmel: Add missing 'interrupts' property watchdog: mtk_wdt: use platform_get_irq_optional watchdog: Add Watchdog Timer driver for RZ/G2L dt-bindings: watchdog: renesas,wdt: Add support for RZ/G2L watchdog: da9063: Add hard dependency on I2C watchdog: Add Realtek Otto watchdog timer dt-bindings: watchdog: Realtek Otto WDT binding watchdog: s3c2410: Add Exynos850 support watchdog: da9063: use atomic safe i2c transfer in reset handler watchdog: davinci: Use div64_ul instead of do_div watchdog: Remove BCM63XX_WDT MIPS: BCM63XX: Provide platform data to watchdog device watchdog: bcm7038_wdt: Add platform device id for bcm63xx-wdt watchdog: Allow building BCM7038_WDT for BCM63XX watchdog: bcm7038_wdt: Support platform data configuration ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linuxLinus Torvalds authored
Pull coccinelle updates from Julia Lawall: "Remove some semantic patches and remove a maintainer. Qing Wang <wangqing@vivo.com> reported that fen.cocci mostly finds false positives, so it is dropped. scripts/coccinelle/iterators/for_each_child.cocci also subsumes it, in a more correct way. Matthew Wilcox <willy@infradead.org> reported that bugon.cocci mostly gives false positives. It is an old script and was designed to be inaccurate to maximally cover problems, but most of what it is useful for has been done already. Gilles Muller passed away and is thus dropped from the maintainers list" * 'for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: drop fen.cocci scripts/coccinelle: drop bugon.cocci MAINTAINERS: remove Gilles Muller
-
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linuxLinus Torvalds authored
Pull module updates from Luis Chamberlain: "The biggest change here is in-kernel support for module decompression. This change is being made to help support LSMs like LoadPin as otherwise it loses link between the source of kernel module on the disk and binary blob that is being loaded into the kernel. kmod decompression is still done by userspace even with this is done, both because there are no measurable gains in not doing so and as it adds a secondary extra check for validating the module before loading it into the kernel. The rest of the changes are minor, the only other change worth mentionin there is Jessica Yu is now bowing out of maintenance of modules as she's taking a break from work. While there were other changes posted for modules, those have not yet received much review of testing so I'm not yet comfortable in merging any of those changes yet." * 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: module: fix signature check failures when using in-kernel decompression kernel: Fix spelling mistake "compresser" -> "compressor" MAINTAINERS: add mailing lists for kmod and modules module.h: allow #define strings to work with MODULE_IMPORT_NS module: add in-kernel support for decompressing MAINTAINERS: Remove myself as modules maintainer module: Remove outdated comment
-
Linus Torvalds authored
Commit 2b3d0478 ("unicode: Add utf8-data module") changed the generated utf8data file from 'utf8data.h' to 'utf8data.c', but didn't change the comments or the .gitignore to match. The comments should be updated too, but at least they don't cause any visible breakage. But the gitignore file needs changing to avoid git complaining about untracked files. Fixes: 2b3d0478 ("unicode: Add utf8-data module") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull signal/exit/ptrace updates from Eric Biederman: "This set of changes deletes some dead code, makes a lot of cleanups which hopefully make the code easier to follow, and fixes bugs found along the way. The end-game which I have not yet reached yet is for fatal signals that generate coredumps to be short-circuit deliverable from complete_signal, for force_siginfo_to_task not to require changing userspace configured signal delivery state, and for the ptrace stops to always happen in locations where we can guarantee on all architectures that the all of the registers are saved and available on the stack. Removal of profile_task_ext, profile_munmap, and profile_handoff_task are the big successes for dead code removal this round. A bunch of small bug fixes are included, as most of the issues reported were small enough that they would not affect bisection so I simply added the fixes and did not fold the fixes into the changes they were fixing. There was a bug that broke coredumps piped to systemd-coredump. I dropped the change that caused that bug and replaced it entirely with something much more restrained. Unfortunately that required some rebasing. Some successes after this set of changes: There are few enough calls to do_exit to audit in a reasonable amount of time. The lifetime of struct kthread now matches the lifetime of struct task, and the pointer to struct kthread is no longer stored in set_child_tid. The flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is removed. Issues where task->exit_code was examined with signal->group_exit_code should been examined were fixed. There are several loosely related changes included because I am cleaning up and if I don't include them they will probably get lost. The original postings of these changes can be found at: https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org I trimmed back the last set of changes to only the obviously correct once. Simply because there was less time for review than I had hoped" * 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits) ptrace/m68k: Stop open coding ptrace_report_syscall ptrace: Remove unused regs argument from ptrace_report_syscall ptrace: Remove second setting of PT_SEIZED in ptrace_attach taskstats: Cleanup the use of task->exit_code exit: Use the correct exit_code in /proc/<pid>/stat exit: Fix the exit_code for wait_task_zombie exit: Coredumps reach do_group_exit exit: Remove profile_handoff_task exit: Remove profile_task_exit & profile_munmap signal: clean up kernel-doc comments signal: Remove the helper signal_group_exit signal: Rename group_exit_task group_exec_task coredump: Stop setting signal->group_exit_task signal: Remove SIGNAL_GROUP_COREDUMP signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process signal: Make coredump handling explicit in complete_signal signal: Have prepare_signal detect coredumps using signal->core_state signal: Have the oom killer detect coredumps using signal->core_state exit: Move force_uaccess back into do_exit exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit ...
-