This patch adds the support for configuring periodic output
signal of PPS. So the PPS can be output at a specified time
and period.
For developers or testers, they can use the command "echo
<channel> <start.sec> <start.nsec> <period.sec> <period.
nsec> > /sys/class/ptp/ptp0/period" to specify time and
period to output PPS signal.
Notice that, the channel can only be set to 0. In addtion,
the start time must larger than the current PTP clock time.
So users can use the command "phc_ctl /dev/ptp0 -- get" to
get the current PTP clock time before.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit ffa84b5f ("net: add netns refcount tracker to struct sock")
added a tracker to sockets, but did not track kernel sockets.

We still have syzbot reports hinting about netns being destroyed
while some kernel TCP sockets had not been dismantled.

This patch tracks kernel sockets, and adds a ref_tracker_dir_print()
call to net_free() right before the netns is freed.

Normally, each layer is responsible for properly releasing its
kernel sockets before last call to net_free().

This debugging facility is enabled with CONFIG_NET_NS_REFCNT_TRACKER=y
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
udp: avoid false sharing on receive

Under high UDP load, the BH processing and the user-space receiver can
run on different cores.

The UDP implementation does a lot of effort to avoid false sharing in
the receive path, but recent changes to the struct sock layout moved
the sk_forward_alloc and the sk_rcvbuf fields on the same cacheline:

        /* --- cacheline 4 boundary (256 bytes) --- */
                struct sk_buff *   tail;
        } sk_backlog;
        int                        sk_forward_alloc;
        unsigned int               sk_reserved_mem;
        unsigned int               sk_ll_usec;
        unsigned int               sk_napi_id;
        int                        sk_rcvbuf;

sk_forward_alloc is updated by the BH, while sk_rcvbuf is accessed by
udp_recvmsg(), causing false sharing.

A possible solution would be to re-order the struct sock fields to avoid
the false sharing. Such change is subject to being invalidated by future
changes and could have negative side effects on other workload.

Instead this series uses a different approach, touching only the UDP
socket layout.

The first patch generalizes the custom setsockopt infrastructure, to
allow UDP tracking the buffer size, and the second patch addresses the
issue, copying the relevant buffer information into an already hot
cacheline.

Overall the above gives a 10% peek throughput increase under UDP flood.

v1 -> v2:
 - introduce and use a common helper to initialize the UDP v4/v6 sockets
   (Kuniyuki)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When the receiver process and the BH runs on different cores,
udp_rmem_release() experience a cache miss while accessing sk_rcvbuf,
as the latter shares the same cacheline with sk_forward_alloc, written
by the BH.

With this patch, UDP tracks the rcvbuf value and its update via custom
SOL_SOCKET socket options, and copies the forward memory threshold value
used by udp_rmem_release() in a different cacheline, already accessed by
the above function and uncontended.

Since the UDP socket init operation grown a bit, factor out the common
code between v4 and v6 in a shared helper.

Overall the above give a 10% peek throughput increase under UDP flood.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We will soon introduce custom setsockopt for UDP sockets, too.
Instead of doing even more complex arbitrary checks inside
sock_use_custom_sol_socket(), add a new socket flag and set it
for the relevant socket types (currently only MPTCP).
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Petr Machata says:

====================
net: Add support for 800Gbps speed

Amit Cohen <amcohen@nvidia.com> writes:

The next Nvidia Spectrum ASIC will support 800Gbps speed.
The IEEE 802 LAN/MAN Standards Committee already published standards for
800Gbps, see the last update [1] and the list of approved changes [2].

As first phase, add support for 800Gbps over 8 lanes (100Gbps/lane).
In the future 800Gbps over 4 lanes can be supported also.

Extend ethtool to support the relevant PMDs and extend mlxsw and bonding
drivers to support 800Gbps.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for 800Gbps speed to allow using 3ad mode with 800G devices.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for 800Gbps speed, link modes of 100Gbps per lane.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for 800Gbps speed, link modes of 100Gbps per lane.
As mentioned in slide 21 in IEEE documentation [1], all adopted 802.3df
copper and optical PMDs baselines using 100G/lane will be supported.

Add the relevant PMDs which are mentioned in slide 5 in IEEE
documentation [1] and were approved on 10-2022 [2]:
BP - KR8
Cu Cable - CR8
MMF 50m - VR8
MMF 100m - SR8
SMF 500m - DR8
SMF 2km - DR8-2

[1]: https://www.ieee802.org/3/df/public/22_10/22_1004/shrikhande_3df_01a_221004.pdf
[2]: https://ieee802.org/3/df/KeyMotions_3df_221005.pdfSigned-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steen Hegelund says:

====================
Add support for Sparx5 IS2 VCAP

This provides initial support for the Sparx5 VCAP functionality via the
'tc' traffic control userspace tool and its flower filter.

Overview:
=========

The supported flower filter keys and actions are:

- source and destination MAC address keys
- trap action
- pass action

The supported Sparx5 VCAPs are: IS2 (see below for more info)

The VCAP (Versatile Content-Aware Processor) feature is essentially a TCAM
with rules consisting of:

- Programmable key fields
- Programmable action fields
- A counter (which may be only one bit wide)

Besides this each VCAP has:

- A number of independent lookups
- A keyset configuration typically per port per lookup

VCAPs are used in many of the TSN features such as PSFP, PTP, FRER as well
as the general shaping, policing and access control, so it is an important
building block for these advanced features.

Functionality:
==============

When a frame is passed to a VCAP the VCAP will generate a set of keys
(keyset) based on the traffic type.  If there is a rule created with this
keyset in the VCAP and the values of the keys matches the values in the
keyset of the frame, the rule is said to match and the actions in the rule
will be executed and the rule counter will be incremented.  No more rules
will be examined in this VCAP lookup.

If there is no match in the current lookup the frame will be matched
against the next lookup (some VCAPs do the processing of the lookups in
parallel).

The Sparx5 SoC has 6 different VCAP types:

- IS0: Ingress Stage 0 (AKA CLM) mostly handles classification
- IS2: Ingress Stage 2 mostly handles access control
- IP6PFX: IPv6 prefix: Provides tables for IPV6 address management
- LPM: Longest Path Match for IP guarding and routing
- ES0: Egress Stage 0 is mostly used for CPU copying and multicast handling
- ES2: Egress Stage 2 is known as the rewriter and mostly updates tags

Design:
=======

The VCAP implementation provides switchcore independent handling of rules
and supports:

- Creating and deleting rules
- Updating and getting rules

The platform specific API implementation as well as the platform specific
model of the VCAP instances are attached to the VCAP API and a client can
then access rules via the API in a platform independent way, with the
limitations that each VCAP has in terms of is supported keys and actions.

The VCAP model is generated from information delivered by the designers of
the VCAP hardware.

Here is an illustration of this:

  +------------------+     +------------------+
  | TC flower filter |     | PTP client       |
  | for Sparx5       |     | for Sparx5       |
  +-------------\----+     +---------/--------+
                 \                  /
                  \                /
                   \              /
                    \            /
                     \          /
                 +----v--------v----+
                 |     VCAP API     |
                 +---------|--------+
                           |
                           |
                           |
                           |
                 +---------v--------+
                 |   VCAP control   |
                 |   instance       |
                 +----/--------|----+
                     /         |
                    /          |
                   /           |
                  /            |
  +--------------v---+    +----v-------------+
  |   Sparx5 VCAP    |    | Sparx5 VCAP API  |
  |   model          |    | Implementation   |
  +------------------+    +---------|--------+
                                    |
                                    |
                                    |
                                    |
                          +---------v--------+
                          | Sparx5 VCAP HW   |
                          +------------------+

Delivery:
=========

For now only the IS2 is supported but later the IS0, ES0 and ES2 will be
added. There are currently no plans to support the IP6PFX and the LPM
VCAPs.

The IS2 VCAP has 4 lookups and they are accessible with a TC chain id:

- chain 8000000: IS2 Lookup 0
- chain 8100000: IS2 Lookup 1
- chain 8200000: IS2 Lookup 2
- chain 8300000: IS2 Lookup 3

These lookups are executed in parallel by the IS2 VCAP but the actions are
executed in series (the datasheet explains what happens if actions
overlap).

The functionality of TC flower as well as TC matchall filters will be
expanded in later submissions as well as the number of VCAPs supported.

This is current plan:

- add support for more TC flower filter keys and extend the Sparx5 port
  keyset configuration
- support for TC protocol all
- debugfs support for inspecting rules
- TC flower filter statistics
- Sparx5 IS0 VCAP support and more TC keys and actions to support this
- add TC policer and drop action support (depends on the Sparx5 QoS support
  upstreamed separately)
- Sparx5 ES0 VCAP support and more TC actions to support this
- TC flower template support
- TC matchall filter support for mirroring and policing ports
- TC flower filter mirror action support
- Sparx5 ES2 VCAP support

The LAN966x switchcore will also be updated to use the VCAP API as well as
future Microchip switches.
The LAN966x has 3 VCAPS (IS1, IS2 and ES0) and a slightly different keyset
and actionset portfolio than Sparx5.

Version History:
================
v3      Moved the sparx5_tc_flower_set_exterr function to the VCAP API and
        renamed it.
        Moved the sparx5_netbytes_copy function to the VCAP_API and renamed
        it (thanks Horatiu Vultur).
        Fixed indentation in the vcap_write_rule function.
        Added a comment mentioning the typegroup table terminator in the
        vcap_iter_skip_tg function.

v2      Made the KUNIT test model a superset of the real model to fix a
        kernel robot build error.

v1      Initial version
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This provides a KUNIT test suite for the VCAP APIs encoding functionality.

The test can be run by adding these settings in a .kunitconfig file

CONFIG_KUNIT=y
CONFIG_NET=y
CONFIG_VCAP_KUNIT_TEST=y
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This provides a test VCAP model for use in a KUNIT test.  The model
provides 3 different VCAP types for better test coverage.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds rule encoding functionality to the VCAP API.

A rule consists of keys and actions in separate cache sections.

The maximum size of the keyset or actionset determines the size of the
rule.

The VCAP hardware need to be able to distinguish different rule sizes from
each other, and for that purpose some extra typegroup bits are added to the
rule when it is encoded.

The API provides a bit stream iterator that allows highlevel encoding
functionality to add key and action value bits independent of typegroup
bits.

This is handled by letting the concrete VCAP model provide the typegroup
table for the different rule sizes.
After the key and action values have been added to the encoding bit streams
the typegroup bits are set to their correct values just before the rule is
written to the VCAP hardware.

The key and action offsets provided in the VCAP model are the offset before
adding the typegroup bits.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This provides most of the rule handling needed to add a new rule to a VCAP.
To add a rule a client must follow these steps:

1) Allocate a new rule (provide an id or get one automatically assigned)
2) Add keys to the rule
3) Add actions to the rule
4) Optionally set a keyset on the rule
5) Optionally set an actionset on the rule
6) Validate the rule (this will add keyset and actionset if not specified
   in the previous steps)
7) Add the rule (if the validation was successful)
8) Free the rule instance (a copy has been added to the VCAP)

The validation step will fail if there are no keysets with the requested
keys, or there are no actionsets with the requested actions.
The validation will also fail if the keyset is not configured for the port
for the requested protocol).
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This provides a default port keyset configuration for the Sparx5 IS2 VCAP
where all ports and all lookups in IS2 use the same keyset (MAC_ETYPE) for
all types of traffic.

This means that no matter what frame type is received on any front port it
will generate the MAC_ETYPE keyset in the IS VCAP and any rule in the IS2
VCAP that uses this keyset will be matched against the keys in the
MAC_ETYPE keyset.

The callback interface used by the VCAP API is populated with Sparx5
specific handler functions that takes care of the actual reading and
writing to data to the Sparx5 IS2 VCAP instance.

A few functions are also added to the VCAP API to support addition of rule
fields such as the ingress port mask and the lookup bit.

The IS2 VCAP in Sparx5 is really divided in two instances with lookup 0
and 1 in the first instance and lookup 2 and 3 in the second instance.
The lookup bit selects lookup 0 or 3 in the respective instance when it is
set.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds initial TC flower filter support to Sparx5 for the IS2 VCAP.

The support consists of the source and destination MAC addresses,
and the trap and pass actions.

This is how you can create a rule that test the functionality:

tc qdisc add dev eth0 clsact
tc filter add dev eth0 ingress chain 8000000 prio 10 handle 10 \
      protocol all flower skip_sw \
      dst_mac 0a:0b:0c:0d:0e:0f \
      src_mac 2:0:0:0:0:1 \
      action trap

The IS2 chains in Sparx5 are assigned like this:

- chain 8000000: IS2 Lookup 0
- chain 8100000: IS2 Lookup 1
- chain 8200000: IS2 Lookup 2
- chain 8300000: IS2 Lookup 3
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds the register interface needed to access the Sparx5 Ingress Stage
2 VCAP (IS2).

The Sparx5 Chip Register Model can be browsed at this location:
https://github.com/microchip-ung/sparx-5_reginfoSigned-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This provides the Sparx5 Ingress Stage 2 (IS2) model and adds it to the
VCAP control instance that will be provided to the VCAP API.

The Sparx5 IS2 C code model is generated from the Sparx5 RTL design model.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This provides the initial VCAP API framework and Sparx5 specific VCAP
implementation.

When the Sparx5 Switchdev driver is initialized it will also initialize its
VCAP module, and this hooks up the concrete Sparx5 VCAP model to the VCAP
API, so that the VCAP API knows what VCAP instances are available.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Support hardware offload when tunnel neigh out port is bond.
These feature work with the nfp firmware. If the firmware
supports the NFP_FL_FEATS_TUNNEL_NEIGH_LAG feature, nfp driver
write the bond information to the firmware neighbor table or
do nothing for bond. when neighbor MAC changes, nfp driver
need to update the neighbor information too.
Signed-off-by: Yanguo Li <yanguo.li@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kuniyuki Iwashima says:

====================
inet6: Remove inet6_destroy_sock() calls.

This is a follow-up series for commit d38afeec ("tcp/udp: Call
inet6_destroy_sock() in IPv6 sk->sk_destruct().").

This series cleans up unnecessary inet6_destory_sock() calls in
sk->sk_prot->destroy() and call it from sk->sk_destruct() to make
sure we do not leak memory related to IPv6 specific-resources.

Changes:
  v2:
    * patch 1
      * Fix build failure for CONFIG_MPTCP_IPV6=y

  v1: https://lore.kernel.org/netdev/20221018190956.1308-1-kuniyu@amazon.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We can reuse the unlock label above and need not repeat the same code.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The last user of inet6_destroy_sock() is its wrapper inet6_cleanup_sock().
Let's rename inet6_destroy_sock() to inet6_cleanup_sock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit d38afeec ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.

SCTP sets its own sk->sk_destruct() in the sctp_init_sock(), and
SCTPv6 socket reuses it as the init function.

To call inet6_sock_destruct() from SCTPv6 sk->sk_destruct(), we
set sctp_v6_destruct_sock() in a new init function.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit d38afeec ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.

DCCP sets its own sk->sk_destruct() in the dccp_init_sock(), and
DCCPv6 socket shares it by calling the same init function via
dccp_v6_init_sock().

To call inet6_sock_destruct() from DCCPv6 sk->sk_destruct(), we
export it and set dccp_v6_sk_destruct() in the init function.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit d38afeec ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.

Now we can remove unnecessary inet6_destroy_sock() calls in
sk->sk_prot->destroy().

DCCP and SCTP have their own sk->sk_destruct() function, so we
change them separately in the following patches.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ioana Ciornei says:

====================
net: dpaa2-eth: AF_XDP zero-copy support

This patch set adds support for AF_XDP zero-copy in the dpaa2-eth
driver. The support is available on the LX2160A SoC and its variants and
only on interfaces (DPNIs) with a maximum of 8 queues (HW limitations
are the root cause).

We are first implementing the .get_channels() callback since this a
dependency for further work.

Patches 2-3 are working on making the necessary changes for multiple
buffer pools on a single interface. By default, without an AF_XDP socket
attached, only a single buffer pool will be used and shared between all
the queues. The changes in the functions are made in this patch, but the
actual allocation and setup of a new BP is done in patch#10.

Patches 4-5 are improving the information exposed in debugfs. We are
exposing a new file to show which buffer pool is used by what channels
and how many buffers it currently has.

The 6th patch updates the dpni_set_pools() firmware API so that we are
capable of setting up a different buffer per queue in later patches.

In the 7th patch the generic dev_open/close APIs are used instead of the
dpaa2-eth internal ones.

Patches 8-9 are rearranging the existing code in dpaa2-eth.c in order to
create new functions which will be used in the XSK implementation in
dpaa2-xsk.c

Finally, the last 3 patches are adding the actual support for both the
Rx and Tx path of AF_XDP zero-copy and some associated tracepoints.
Details on the implementation can be found in the actual patch.

Changes in v2:
 - 3/12:  Export dpaa2_eth_allocate_dpbp/dpaa2_eth_free_dpbp in this
   patch to avoid a build warning. The functions will be used in next
   patches.
 - 6/12:  Use __le16 instead of u16 for the dpbp_id field.
 - 12/12: Use xdp_buff->data_hard_start when tracing the BP seeding.

Changes in v3:
 - 3/12: fix leaking of bp on error path
====================
Acked-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Define the dpaa2_tx_xsk_fd and dpaa2_rx_xsk_fd trace events for the XSK
zero-copy Rx and Tx path.  Also, define the dpaa2_eth_buf as an event
class so that both dpaa2_eth_buf_seed and dpaa2_xsk_buf_seed traces can
derive from the same class.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support in dpaa2-eth for packet processing on the Tx path using
AF_XDP zero copy mode.

The newly added dpaa2_xsk_tx() function will handle enqueuing AF_XDP Tx
packets into the appropriate queue and update any necessary statistics.

On a more detailed note, the dpaa2_xsk_tx_build_fd() function handles
creating a Scatter-Gather frame descriptor with only one data buffer.
This is needed because otherwise we would need to impose a headroom in
the Tx buffer to store our software annotation structures.
This tactic is already used on the normal data path of the dpaa2-eth
driver, thus we are reusing the dpaa2_eth_sgt_get/dpaa2_eth_sgt_recycle
functions in order to allocate and recycle the Scatter-Gather table
buffers.

In case we have reached the maximum number of Tx XSK packets to be sent
in a NAPI cycle, we'll exit the dpaa2_eth_poll() and hope to be
rescheduled again.

On the XSK Tx confirmation path, we are just unmapping the SGT buffer
and recycle it for further use.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the support for receiving packets via the AF_XDP
zero-copy mechanism in the dpaa2-eth driver. The support is available
only on the LX2160A SoC and variants because we are relying on the HW
capability to associate a buffer pool to a specific queue (QDBIN), only
available on newer WRIOP versions.

On the control path, the dpaa2_xsk_enable_pool() function is responsible
to allocate a buffer pool (BP), setup this new BP to be used only on the
requested queue and change the consume function to point to the XSK ZC
one.
We are forced to call dev_close() in order to change the queue to buffer
pool association (dpaa2_xsk_set_bp_per_qdbin) . This also works in our
favor since at dev_close() the buffer pools will be drained and at the
later dev_open() call they will be again seeded, this time with buffers
allocated from the XSK pool if needed.

On the data path, a new software annotation type is defined to be used
only for the XSK scenarios. This will enable us to pass keep necessary
information about a packet buffer between the moment in which it was
seeded and when it's received by the driver. In the XSK case, we are
keeping the associated xdp_buff.
Depending on the action returned by the BPF program, we will do the
following:
 - XDP_PASS: copy the contents of the packet into a brand new skb,
   recycle the initial buffer.
 - XDP_TX: just enqueue the same frame descriptor back into the Tx path,
   the buffer will get automatically released into the initial BP.
 - XDP_REDIRECT: call xdp_do_redirect() and exit.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Carve out code from the dpaa2_eth_rx() function in order to create and
export the dpaa2_eth_receive_skb() function. Do this in order to reuse
this code also from the XSK path which will be introduced in a later
patch.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dpaa2_eth_alloc_skb() function is added by moving code from the
dpaa2_eth_copybreak() previously defined function. What the new API does
is to allocate a new skb, copy the frame data from the passed FD to the
new skb and then return the skb.
Export this new function since we'll need the this functionality also
from the XSK code path.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of calling the internal functions which implement .ndo_stop and
.ndo_open, we can simply call dev_close and dev_open, so that we keep
the code cleaner.

Also, in the next patches we'll use the same APIs from other files
without needing to export the internal functions.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the dpni_set_pool() firmware API so that in the next patches we
can configure per Rx queue (per QDBIN) buffer pools.
This is a hard requirement of the AF_XDP, thus we need the newer API
version.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Export the allocated buffer pools, the number of buffers that they have
currently and which channels are using which BP.

The output looks like below:

Buffer pool info for eth2:
IDX        BPID      Buf count      CH#0      CH#1      CH#2      CH#3
BP#0         1           5124         x         x         x         x
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Just give out an index for each channel that we export into the debug
file in the form of CH#<index>. This is purely to help corelate each
channel information from one debugfs file to another one.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch allows the configuration of multiple buffer pools associated
with a single DPNI object, each distinct DPBP object not necessarily
shared among all queues.
The user can interogate both the number of buffer pools and the buffer
count in each buffer pool by using the .get_ethtool_stats() callback.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rearrange the variables in the dpaa2_eth_get_ethtool_stats() function so
that we adhere to the reverse Christmas tree rule.
Also, in the next patch we are adding more variables and I didn't know
where to place them with the current ordering.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .get_channels() ethtool_ops callback is implemented and exports the
number of queues: Rx, Tx, Tx conf and Rx err.
The last two ones, Tx confirmation and Rx err, are counted as 'others'.

The .set_channels() callback is not implemented since the DPAA2
software/firmware architecture does not allow the dynamic
reconfiguration of the number of queues.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Document GPIO for HW reset.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>