Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:

A couple of additional refactorings on top of the multi-CS support.
One is to make sure that the comment and the code are not disrupted
if additional changes come in the future and second one is f or the
sake of deduplication. In both cases it also makes indentation level
smaller in the affected pieces of the code.

No functional changes intended.

For some reason the commit 1209c556 ("spi: Consistently use BIT
for cs_index_mask") missed one place to change, do it here to finish
the job.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240415184757.1198149-1-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

In order of deduplication and better maintenance introduce a new
spi_for_each_valid_cs() helper macro.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240415193340.1279360-3-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The multi-CS support splits the comment and the code in the spi_set_cs().
To avoid this in the future extract spi_toggle_csgpiod() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240415193340.1279360-2-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

There is no need to allocate chip_data and then validate number of
CS pins as it will have the same effect. Hence move number of CS pins
validation out of condition in setup().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240403171550.1074644-2-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for platform driver.  Having another MODULE_ALIAS
causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154859.126931-1-krzk@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Commit 8167bd1c ("ASoC: dt-bindings: ti,pcm1681: Convert to dtschema")
converts ti,pcm1681.txt to ti,pcm1681.yaml, but misses to adjust the file
entry in TEXAS INSTRUMENTS AUDIO (ASoC/HDA) DRIVERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Adjust the file entry in TEXAS INSTRUMENTS AUDIO (ASoC/HDA) DRIVERS after
this conversion.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://msgid.link/r/20240411075803.53657-1-lukas.bulwahn@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Théo Lebrun <theo.lebrun@bootlin.com>:

This series prepares support for the embedded Cadence Quad SPI
controller on Mobileye EyeQ5.

Make cdns,fifo-depth devicetree property optional.
Value can be detected at runtime.

Upper SRAMPARTITION register bits are read-only. Procedure to find FIFO
depth is therefore to write 0xFFFFFFFF and read back to get amount of
writeable bits.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240410-cdns-qspi-mbly-v3-3-7b7053449cf7@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add Mobileye EyeQ5 compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240410-cdns-qspi-mbly-v3-2-7b7053449cf7@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Compatibles are ordered by date of addition.
Switch to (deterministic) alphabetical ordering.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240410-cdns-qspi-mbly-v3-1-7b7053449cf7@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Refactor code for "is the node's child available?" check by using the
corresponding macro instead, which reads more clearly.

While at it, use scope-based cleanup instead of manual of_node_put()
calls when getting platform data through cdns_xspi_of_get_plat_data().

This removes the unnecessary "node_child" declaration out of the loop's
scope and auto cleans up "node_child" when it goes out of scope, even
when we return early due to error.
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Link: https://msgid.link/r/20240410130205.179069-1-five231003@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

cqspi_enable_dtr() is called for each operation, commands or not, reads
or writes. It writes CQSPI_REG_CONFIG then waits for idle (three
successful reads). Skip that in the no-DTR case if DTR is already
disabled.

It cannot be skipped in the DTR case as cqspi_setup_opcode_ext() writes
to a register and we must wait for idle state.

According to ftrace, the average cqspi_exec_mem_op() call goes from
85.4µs to 83.6µs when reading 235M over UBIFS on an octal flash.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240405-cdns-qspi-mbly-v2-6-956679866d6d@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Avoid of_device_get_match_data() call on each IRQ and each read
operation. Store pointer in `struct cqspi_st` device instance.

End-to-end performance measurements improve with this patch. On a given
octal flash, reading 235M over UBIFS is ~3.4% faster. During that read,
the average cqspi_exec_mem_op() call goes from 85.4µs to 80.7µs
according to ftrace. The worst case goes from 622.4µs to 615.2µs.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240405-cdns-qspi-mbly-v2-4-956679866d6d@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

The Cadence QSPI Controller driver is used on Mobileye EyeQ5 platform.
Allow building on MIPS.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240405-cdns-qspi-mbly-v2-3-956679866d6d@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

pxa_ssp_request() implies a reference counting, hence the pxa_ssp_free()
must be called when we are done. Add missed call.

Fixes: bb77c99e ("spi: pxa2xx: Skip SSP initialization if it's done elsewhere")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240402144523.3402063-1-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Core in spi_register_driver() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240328203927.156184-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

kernel-doc complains about last_cs_index_mask not described, so add its
description.

spi.h:778: warning: Function parameter or struct member 'last_cs_index_mask' not described in 'spi_controller'

Fixes: 4d8ff6b0 ("spi: Add multi-cs memories support in SPI core")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240328223340.17159-1-rdunlap@infradead.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from David Lechner <dlechner@baylibre.com>:

I found a couple more controller drivers that were checking if the
tx_buf and rx_buf fields in the spi_transfer structure were set by a
peripheral driver that I missed in [1]. These checks can be removed
as well.

[1]: https://lore.kernel.org/linux-spi/20240325-spi-remove-is_dma_mapped-v2-1-d08d62b61f1c@baylibre.com/

Merge series from Louis Chauvet <louis.chauvet@bootlin.com>:

This series adds the support for the omap-mcspi multi mode which allows
sending SPI messages with a shorter delay between CS and the message.

One drawback of the multi-mode is that the CS is raised between each word,
so it can only be used with messages containing 1 word transfers and
asking for cs_change. Few devices, like FPGAs, may easily workaround this
limitation.

The first patch removes the current implementation, which is working, but
don't comply with what is asked in the spi transfer (The CS is raised by
the hardware regardless of cs_change state). No drivers or board file use this
implementation upstream.

The second patch adds the implementation of the multi-mode, which complies
with what is asked in the SPI message.

The third patch is the suggested optimization for using MULTI mode in more
situations.

There are no more peripheral drivers that set t->tx_dma or t->rx_dma.
Therefore, is_dma_mapped is always false and can be removed.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20240328-spi-more-tx-rx-buf-cleanup-v1-2-9ec1ceedf08c@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

There are no more peripheral drivers that set t->tx_dma or t->rx_dma so
these will always == 0. Therefore, we can remove these checks since
they are always true.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20240328-spi-more-tx-rx-buf-cleanup-v1-1-9ec1ceedf08c@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

If SSP has been enumerated elsewhere, skip its initialization
in pxa2xx_spi_init_pdata().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240327193138.2385910-5-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Refactor pxa2xx_spi_init_pdata() by extracting a new
pxa2xx_spi_init_ssp() helper which makes code less
twisted. It will be easier to continue refactoring for
a new coming modification.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240327193138.2385910-4-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Drop rather useless use of ACPI_PTR() and of_match_ptr().
It also removes the necessity to be dependent of.h inclusion.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240327193138.2385910-3-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The PCI || ACPI dependency is the historical part of the x86 support.
Narrow the Kconfig option visibility by limiting this dependency to x86.

The drop of x86 for PCI case had happened in the commit 2b49ebda
("spi/pxa2xx: allow building on a 64-bit kernel"), while the ACPI
was specifically added for Intel Lynx Point in the commit a3496855
("spi/pxa2xx: add support for Lynxpoint SPI controllers").

Note that X86 covers both 32- and 64-bit variants.
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240327193138.2385910-2-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Enable multimode when a transfer of multiple small words can be
transformed in a transfer with a single bigger word. This is allowed as
long as the result on the cable is the same, so word_delay must be zero.
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://msgid.link/r/20240327-spi-omap2-mcspi-multi-mode-v3-3-c4ac329dd5a2@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Introduce support for MULTI-mode in the OMAP2 MCSPI driver. Currently, the
driver always uses SINGLE mode to handle the chip select (CS). With this
enhancement, MULTI-mode is enabled for specific messages, allowing for a
shorter delay between CS enable and the message (some FPGA devices are
sensitive to this delay).

The OMAP2 MCSPI device can use two different mode to send messages, SINGLE
and MULTI:
In SINGLE mode, the controller only leverages one single FIFO, and the
host system has to manually select the CS it wants to enable.
In MULTI mode, each CS is bound to a FIFO, the host system then writes the
data to the relevant FIFO, as the hardware will take care of the CS

The drawback of multi-mode is that it's not possible to keep the CS
enabled between each words. Therefore, this patch enables multi-mode only
for specific messages: the spi_message must contain only spi_transfer of 1
word (of any size) with cs_change enabled.

A new member is introduced in the omap2_mcspi structure to keep track of
the current used mode.
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://msgid.link/r/20240327-spi-omap2-mcspi-multi-mode-v3-2-c4ac329dd5a2@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Commit 5cbc7ca9 ("spi: spi-omap2-mcspi.c: Toggle CS after each
word") introduced the toggling of CS after each word for the omap2-mcspi
controller.

The implementation is not respectful of the actual spi_message
content, so the CS can be raised after each word even if the
transfer structure asks to keep the CS active for the whole operation.

As it is not used anyway in the current Linux tree, it can be safely
removed.
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://msgid.link/r/20240327-spi-omap2-mcspi-multi-mode-v3-1-c4ac329dd5a2@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Core in platform_driver_register() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240327174737.519637-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Core in platform_driver_register() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240327174737.519637-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Core in spi_register_driver() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240327174737.519637-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Switch to use dev_err_probe() to simplify the error path and
unify a message template.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240326181027.1418989-4-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Keep the PXA*_SSP types together in enum pxa_ssp_type
for better maintenance.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240326181027.1418989-3-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:

Fix kernel documentation and inclusion block, and dropping the size
of the num_chipselect.

Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:

A couple of cleanups against linux/spi/pxa2xx_spi.h.

I'm sending this as v3 to land in the SPI subsystem. Meanwhile I'm
preparing an update to make linux/spi/pxa2xx_spi.h private to the
subsystem (PXA2xx driver). But the second part will be presented later
on (likely after v6.9-rc1). That said, this can be routed either via
SoC tree or SPI, up to respective maintainers.

There are no more users of the deprecated is_dma_mapped in struct
spi_message so it can be removed.

References in documentation and comments are also removed.

A few similar checks if xfer->tx_dma or xfer->rx_dma are not NULL are
also removed since these are now guaranteed to be NULL because they
were previously set only if is_dma_mapped was true.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20240325-spi-remove-is_dma_mapped-v2-1-d08d62b61f1c@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support to the SPI controller driver to use SPI MEM framework.
SPI subsystem utilizing the SPI memory operations allows to re-use
SPI controller drivers for both SPI NOR devices, regular SPI devices
as well as SPI NAND devices.

Add below functions of spi_mem_ops to support SPI MEM framework
- exec-op(): to execute the memory operations.
- supports_op(): to check if the memory operation is supported.
- adjust_op_size(): to split data transfers so that they don’t exceed the
  max transfer size supported by the controller.
Suggested-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Co-developed-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Signed-off-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://msgid.link/r/20240229134544.3461757-1-Raju.Rangoju@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

No in-kernel users of struct rspi_plat_data. If required,
the software nodes should be used for such users. For now
just get rid of it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240325142118.3210915-1-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

All the spi_transfer variables in this file use the name "xfer" except
the one in mtk_spi_interrupt(). Align the naming for consistency and
easier searching.

While at it, reformat one memcpy() usage since the coding style allows
100 column lines today.

This commit has no functional change.
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240321070942.1587146-3-fshao@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>