- 13 Aug, 2018 20 commits
-
-
Jamal Hadi Salim authored
Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Willem de Bruijn authored
The kbuild robot shows build failure on machines without CONFIG_SMP: drivers/net/virtio_net.c:1916:10: error: implicit declaration of function 'cpumask_next_wrap' cpumask_next_wrap is exported from lib/cpumask.o, which has lib-$(CONFIG_SMP) += cpumask.o same as other functions, also define it as static inline in the NR_CPUS==1 branch in include/linux/cpumask.h. If wrap is true and next == start, return nr_cpumask_bits, or 1. Else wrap across the range of valid cpus, here [0]. Fixes: 2ca653d6 ("virtio_net: Stripe queue affinities across cores.") Signed-off-by:Willem de Bruijn <willemb@google.com> Tested-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Heiner Kallweit authored
There have been two reports that network doesn't come back on resume from suspend when using MSI-X. Both cases affect the same chip version (RTL8168g - version 40), on different systems. Falling back to MSI fixes the issue. Even though we don't really have a proof yet that the network chip version is to blame, let's disable MSI-X for this version. Reported-by:
Steve Dodd <steved424@gmail.com> Reported-by:
Lou Reed <gogen@disroot.org> Tested-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
David S. Miller authored
Moritz Fischer says: ==================== net: nixge: Minor cleanups in preparation of my 64-bit support series, here's some minor cleanup in preparation that gets rid of unneccesary accesses to the descriptor application fields. I've confirmed that the hardware does not access the fields in all our configurations. ==================== Signed-off-by: -
Moritz Fischer authored
Don't store skb in app4 field of descriptor since it is not being used anywhere (including hardware). Signed-off-by:
Moritz Fischer <mdf@kernel.org> Signed-off-by:
-
Moritz Fischer authored
Do not zero application specific fields in DMA descriptors. The hardware does ignore them, so should software. Signed-off-by:
-
Wei Wang authored
In l2tp code, if it is a L2TP_UDP_ENCAP tunnel, tunnel->sk points to a UDP socket. User could call sendmsg() on both this tunnel and the UDP socket itself concurrently. As l2tp_xmit_skb() holds socket lock and call __sk_dst_check() to refresh sk->sk_dst_cache, while udpv6_sendmsg() is lockless and call sk_dst_check() to refresh sk->sk_dst_cache, there could be a race and cause the dst cache to be freed multiple times. So we fix l2tp side code to always call sk_dst_check() to garantee xchg() is called when refreshing sk->sk_dst_cache to avoid race conditions. Syzkaller reported stack trace: BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] BUG: KASAN: use-after-free in atomic_fetch_add_unless include/linux/atomic.h:575 [inline] BUG: KASAN: use-after-free in atomic_add_unless include/linux/atomic.h:597 [inline] BUG: KASAN: use-after-free in dst_hold_safe include/net/dst.h:308 [inline] BUG: KASAN: use-after-free in ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029 Read of size 4 at addr ffff8801aea9a880 by task syz-executor129/4829 CPU: 0 PID: 4829 Comm: syz-executor129 Not tainted 4.18.0-rc7-next-20180802+ #30 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x30d mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272 atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] atomic_fetch_add_unless include/linux/atomic.h:575 [inline] atomic_add_unless include/linux/atomic.h:597 [inline] dst_hold_safe include/net/dst.h:308 [inline] ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029 rt6_get_pcpu_route net/ipv6/route.c:1249 [inline] ip6_pol_route+0x354/0xd20 net/ipv6/route.c:1922 ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2098 fib6_rule_lookup+0x283/0x890 net/ipv6/fib6_rules.c:122 ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2126 ip6_dst_lookup_tail+0x1278/0x1da0 net/ipv6/ip6_output.c:978 ip6_dst_lookup_flow+0xc8/0x270 net/ipv6/ip6_output.c:1079 ip6_sk_dst_lookup_flow+0x5ed/0xc50 net/ipv6/ip6_output.c:1117 udpv6_sendmsg+0x2163/0x36b0 net/ipv6/udp.c:1354 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x51d/0x930 net/socket.c:2115 __sys_sendmmsg+0x240/0x6f0 net/socket.c:2210 __do_sys_sendmmsg net/socket.c:2239 [inline] __se_sys_sendmmsg net/socket.c:2236 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2236 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446a29 Code: e8 ac b8 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f4de5532db8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000006dcc38 RCX: 0000000000446a29 RDX: 00000000000000b8 RSI: 0000000020001b00 RDI: 0000000000000003 RBP: 00000000006dcc30 R08: 00007f4de5533700 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dcc3c R13: 00007ffe2b830fdf R14: 00007f4de55339c0 R15: 0000000000000001 Fixes: 71b1391a ("l2tp: ensure sk->dst is still valid") Reported-by: syzbot+05f840f3b04f211bad55@syzkaller.appspotmail.com Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Cc: Guillaume Nault <g.nault@alphalink.fr> Cc: David Ahern <dsahern@gmail.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Virgile Jarry authored
Preventing the kernel from responding to ICMP Echo Requests messages can be useful in several ways. The sysctl parameter 'icmp_echo_ignore_all' can be used to prevent the kernel from responding to IPv4 ICMP echo requests. For IPv6 pings, such a sysctl kernel parameter did not exist. Add the ability to prevent the kernel from responding to IPv6 ICMP echo requests through the use of the following sysctl parameter : /proc/sys/net/ipv6/icmp/echo_ignore_all. Update the documentation to reflect this change. Signed-off-by:
Virgile Jarry <virgile@acceis.fr> Signed-off-by:
-
David S. Miller authored
Vakul Garg says: ==================== net/tls: Combined memory allocation for decryption request This patch does a combined memory allocation from heap for scatterlists, aead_request, aad and iv for the tls record decryption path. In present code, aead_request is allocated from heap, scatterlists on a conditional basis are allocated on heap or on stack. This is inefficient as it may requires multiple kmalloc/kfree. The initialization vector passed in cryption request is allocated on stack. This is a problem since the stack memory is not dma-able from crypto accelerators. Doing one combined memory allocation for each decryption request fixes both the above issues. It also paves a way to be able to submit multiple async decryption requests while the previous one is pending i.e. being processed or queued. ==================== Signed-off-by: -
Vakul Garg authored
For preparing decryption request, several memory chunks are required (aead_req, sgin, sgout, iv, aad). For submitting the decrypt request to an accelerator, it is required that the buffers which are read by the accelerator must be dma-able and not come from stack. The buffers for aad and iv can be separately kmalloced each, but it is inefficient. This patch does a combined allocation for preparing decryption request and then segments into aead_req || sgin || sgout || iv || aad. Signed-off-by:
Vakul Garg <vakul.garg@nxp.com> Signed-off-by:
-
- 12 Aug, 2018 4 commits
-
-
David S. Miller authored
Peter Oskolkov says: ==================== ip: faster in-order IP fragments Added "Signed-off-by" in v2. ==================== Signed-off-by: -
Peter Oskolkov authored
This patch changes the runtime behavior of IP defrag queue: incoming in-order fragments are added to the end of the current list/"run" of in-order fragments at the tail. On some workloads, UDP stream performance is substantially improved: RX: ./udp_stream -F 10 -T 2 -l 60 TX: ./udp_stream -c -H <host> -F 10 -T 5 -l 60 with this patchset applied on a 10Gbps receiver: throughput=9524.18 throughput_units=Mbit/s upstream (net-next): throughput=4608.93 throughput_units=Mbit/s Reported-by:
Peter Oskolkov <posk@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by:
-
Peter Oskolkov authored
This patch introduces several helper functions/macros that will be used in the follow-up patch. No runtime changes yet. The new logic (fully implemented in the second patch) is as follows: * Nodes in the rb-tree will now contain not single fragments, but lists of consecutive fragments ("runs"). * At each point in time, the current "active" run at the tail is maintained/tracked. Fragments that arrive in-order, adjacent to the previous tail fragment, are added to this tail run without triggering the re-balancing of the rb-tree. * If a fragment arrives out of order with the offset _before_ the tail run, it is inserted into the rb-tree as a single fragment. * If a fragment arrives after the current tail fragment (with a gap), it starts a new "tail" run, as is inserted into the rb-tree at the end as the head of the new run. skb->cb is used to store additional information needed here (suggested by Eric Dumazet). Reported-by: -
David S. Miller authored
-
- 11 Aug, 2018 16 commits
-
-
David S. Miller authored
Vlad Buslov says: ==================== Remove rtnl lock dependency from all action implementations Currently, all netlink protocol handlers for updating rules, actions and qdiscs are protected with single global rtnl lock which removes any possibility for parallelism. This patch set is a second step to remove rtnl lock dependency from TC rules update path. Recently, new rtnl registration flag RTNL_FLAG_DOIT_UNLOCKED was added. Handlers registered with this flag are called without RTNL taken. End goal is to have rule update handlers(RTM_NEWTFILTER, RTM_DELTFILTER, etc.) to be registered with UNLOCKED flag to allow parallel execution. However, there is no intention to completely remove or split rtnl lock itself. This patch set addresses specific problems in implementation of tc actions that prevent their control path from being executed concurrently. Additional changes are required to refactor classifiers API and individual classifiers for parallel execution. This patch set lays groundwork to eventually register rule update handlers as rtnl-unlocked. Action API is already prepared for parallel execution with previous patch set, which means that action ops that use action API for their implementation do not require additional modifications. (delete, search, etc.) Action API implements concurrency-safe reference counting and guarantees that cleanup/delete is called only once, after last reference to action is released. The goal of this change is to update specific actions APIs that access action private state directly, in order to be independent from external locking. General approach is to re-use existing tcf_lock spinlock (used by some action implementation to synchronize control path with data path) to protect action private state from concurrent modification. If action has rcu-protected pointer, tcf spinlock is used to protect its update code, instead of relying on rtnl lock. Some actions need to determine rtnl mutex status in order to release it. For example, ife action can load additional kernel modules(meta ops) and must make sure that no locks are held during module load. In such cases 'rtnl_held' argument is used to conditionally release rtnl mutex. Changes from V1 to V2: - Patch 12: - new patch - Patch 14: - refactor gen_new_estimator() to reuse stats_lock when re-assigning rate estimator statistics pointer - Remove mirred and tunnel_key helper function changes. (to be submitted and standalone patch) ==================== Signed-off-by: -
Vlad Buslov authored
Use tcf spinlock to protect police action private data from concurrent modification during dump. (init already uses tcf spinlock when changing police action state) Pass tcf spinlock as estimator lock argument to gen_replace_estimator() during action init. Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Vlad Buslov authored
Extend gen_new_estimator() to also take stats_lock when re-assigning rate estimator statistics pointer. (to be used by unlocked actions) Rename 'stats_lock' to 'lock' and change argument description to explain that it is now also used for control path. Signed-off-by:
-
Vlad Buslov authored
Re-introduce mirred list spinlock, that was removed some time ago, in order to protect it from concurrent modifications, instead of relying on rtnl lock. Use tcf spinlock to protect mirred action private data from concurrent modification in init and dump. Rearrange access to mirred data in order to be performed only while holding the lock. Rearrange net dev access to always hold reference while working with it, instead of relying on rntl lock. Signed-off-by:
-
Vlad Buslov authored
As a preparation for removing dependency on rtnl lock from rules update path, all users of shared objects must take reference while working with them. Extend action ops with put_dev() API to be used on net device returned by get_dev(). Modify mirred action (only action that implements get_dev callback): - Take reference to net device in get_dev. - Implement put_dev API that releases reference to net device. Signed-off-by:
-
Vlad Buslov authored
Use tcf spinlock to protect vlan action private data from concurrent modification during dump and init. Use rcu swap operation to reassign params pointer under protection of tcf lock. (old params value is not used by init, so there is no need of standalone rcu dereference step) Remove rtnl assertion that is no longer necessary. Signed-off-by:
-
Vlad Buslov authored
Use tcf lock to protect tunnel key action struct private data from concurrent modification in init and dump. Use rcu swap operation to reassign params pointer under protection of tcf lock. (old params value is not used by init, so there is no need of standalone rcu dereference step) Remove rtnl lock assertion that is no longer required. Signed-off-by:
-
Vlad Buslov authored
Move read of skbmod_p rcu pointer to be protected by tcf spinlock. Use tcf spinlock to protect private skbmod data from concurrent modification during dump. Signed-off-by:
-
Vlad Buslov authored
Use tcf spinlock to protect private simple action data from concurrent modification during dump. (simple init already uses tcf spinlock when changing action state) Signed-off-by:
-
Vlad Buslov authored
Use tcf spinlock to protect private sample action data from concurrent modification during dump and init. Signed-off-by:
-
Vlad Buslov authored
Rearrange pedit init code to only access pedit action data while holding tcf spinlock. Change keys allocation type to atomic to allow it to execute while holding tcf spinlock. Take tcf spinlock in dump function when accessing pedit action data. Signed-off-by:
-
Vlad Buslov authored
Use tcf spinlock to protect ipt action private data from concurrent modification during dump. Ipt init already takes tcf spinlock when modifying ipt state. Signed-off-by:
-
Vlad Buslov authored
Use tcf spinlock and rcu to protect params pointer from concurrent modification during dump and init. Use rcu swap operation to reassign params pointer under protection of tcf lock. (old params value is not used by init, so there is no need of standalone rcu dereference step) Ife action has meta-actions that are compiled as standalone modules. Rtnl mutex must be released while loading a kernel module. In order to support execution without rtnl mutex, propagate 'rtnl_held' argument to meta action loading functions. When requesting meta action module, conditionally release rtnl lock depending on 'rtnl_held' argument. Signed-off-by:
-
Vlad Buslov authored
Use tcf spinlock to protect gact action private state from concurrent modification during dump and init. Remove rtnl assertion that is no longer necessary. Signed-off-by:
-
Vlad Buslov authored
Use tcf lock to protect csum action struct private data from concurrent modification in init and dump. Use rcu swap operation to reassign params pointer under protection of tcf lock. (old params value is not used by init, so there is no need of standalone rcu dereference step) Remove rtnl assertion that is no longer necessary. Signed-off-by:
-
Vlad Buslov authored
Use tcf spinlock to protect bpf action private data from concurrent modification during dump and init. Remove rtnl lock assertion that is no longer necessary. Signed-off-by:
-
