- 07 Sep, 2023 10 commits
-
-
Paolo Abeni authored
Jijie Shao says: ==================== There are some bugfix for the HNS3 ethernet driver ==================== Link: https://lore.kernel.org/r/20230906072018.3020671-1-shaojijie@huawei.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jie Wang authored
HNS3 NIC does not support GSO partial packets segmentation. Actually tunnel packets for example NvGRE packets segment offload and checksum offload is already supported. There is no need to keep gso partial feature bit. So this patch removes it. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by:
Jie Wang <wangjie125@huawei.com> Signed-off-by:
Jijie Shao <shaojijie@huawei.com> Signed-off-by:
-
Yisen Zhuang authored
When sfp is absent or unidentified, the port type should be displayed as PORT_OTHERS, rather than PORT_FIBRE. Fixes: 88d10bd6 ("net: hns3: add support for multiple media type") Signed-off-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
-
Jijie Shao authored
We hope that tc qdisc and dcb ets commands can not be used crosswise. If we want to use any of the commands to configure tc, We must use the other command to clear the existing configuration. However, when we configure a single tc with tc qdisc, we can still configure it with dcb ets. Because we use mqprio_active as the tag of tc qdisc configuration, but with dcb ets, we do not check mqprio_active. This patch fix this issue by check mqprio_active before executing the dcb ets command. and add dcb_ets_active to replace HCLGE_FLAG_DCB_ENABLE and HCLGE_FLAG_MQPRIO_ENABLE at the hclge layer, Fixes: cacde272 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by:
-
Hao Chen authored
Now in hns3_dbg_uninit(), there may be concurrency between kfree buffer and read, it may result in memory error. Moving debugfs_remove_recursive() in front of kfree buffer to ensure they don't happen at the same time. Fixes: 5e69ea7e ("net: hns3: refactor the debugfs process") Signed-off-by:
Hao Chen <chenhao418@huawei.com> Signed-off-by:
-
Hao Chen authored
req1->tcam_data is defined as "u8 tcam_data[8]", and we convert it as (u32 *) without considerring byte order conversion, it may result in printing wrong data for tcam_data. Convert tcam_data to (__le32 *) first to fix it. Fixes: b5a0b70d ("net: hns3: refactor dump fd tcam of debugfs") Signed-off-by:
-
Jijie Shao authored
support query tx timeout threshold by debugfs Signed-off-by:
-
Jian Shen authored
Currently, the driver knocks the ring doorbell before updating the ring->last_to_use in tx flow. if the hardware transmiting packet and napi poll scheduling are fast enough, it may get the old ring->last_to_use in drivers' napi poll. In this case, the driver will think the tx is not completed, and return directly without clear the flag __QUEUE_STATE_STACK_XOFF, which may cause tx timeout. Fixes: 20d06ca2 ("net: hns3: optimize the tx clean process") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Lukasz Majewski authored
The KSZ9477 errata points out (in 'Module 4') the link up/down problems when EEE (Energy Efficient Ethernet) is enabled in the device to which the KSZ9477 tries to auto negotiate. The suggested workaround is to clear advertisement of EEE for PHYs in this chip driver. To avoid regressions with other switch ICs the new MICREL_NO_EEE flag has been introduced. Moreover, the in-register disablement of MMD_DEVICE_ID_EEE_ADV.MMD_EEE_ADV MMD register is removed, as this code is both; now executed too late (after previous rework of the PHY and DSA for KSZ switches) and not required as setting all members of eee_broken_modes bit field prevents the KSZ9477 from advertising EEE. Fixes: 69d3b36c ("net: dsa: microchip: enable EEE support") # for KSZ9477 Signed-off-by:
Lukasz Majewski <lukma@denx.de> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # Confirmed disabled EEE with oscilloscope. Reviewed-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230905093315.784052-1-lukma@denx.deSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2023-09-06 We've added 9 non-merge commits during the last 6 day(s) which contain a total of 12 files changed, 189 insertions(+), 44 deletions(-). The main changes are: 1) Fix bpf_sk_storage to address an invalid wait context lockdep report and another one to address missing omem uncharge, from Martin KaFai Lau. 2) Two BPF recursion detection related fixes, from Sebastian Andrzej Siewior. 3) Fix tailcall limit enforcement in trampolines for s390 JIT, from Ilya Leoshkevich. 4) Fix a sockmap refcount race where skbs in sk_psock_backlog can be referenced after user space side has already skb_consumed them, from John Fastabend. 5) Fix BPF CI flake/race wrt sockmap vsock write test where the transport endpoint is not connected, from Xu Kuohai. 6) Follow-up doc fix to address a cross-link warning, from Eduard Zingerman. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc bpf: bpf_sk_storage: Fix invalid wait context lockdep report s390/bpf: Pass through tail call counter in trampolines bpf: Assign bpf_tramp_run_ctx::saved_run_ctx before recursion check. bpf: Invoke __bpf_prog_exit_sleepable_recur() on recursion in kern_sys_bpf(). bpf, sockmap: Fix skb refcnt race after locking changes docs/bpf: Fix "file doesn't exist" warnings in {llvm_reloc,btf}.rst selftests/bpf: Fix a CI failure caused by vsock write ==================== Link: https://lore.kernel.org/r/20230906095117.16941-1-daniel@iogearbox.netSigned-off-by:
-
- 06 Sep, 2023 17 commits
-
-
Martin KaFai Lau authored
This patch checks the sk_omem_alloc has been uncharged by bpf_sk_storage during the __sk_destruct. Signed-off-by:
Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230901231129.578493-4-martin.lau@linux.dev
-
Martin KaFai Lau authored
The commit c83597fa ("bpf: Refactor some inode/task/sk storage functions for reuse"), refactored the bpf_{sk,task,inode}_storage_free() into bpf_local_storage_unlink_nolock() which then later renamed to bpf_local_storage_destroy(). The commit accidentally passed the "bool uncharge_mem = false" argument to bpf_selem_unlink_storage_nolock() which then stopped the uncharge from happening to the sk->sk_omem_alloc. This missing uncharge only happens when the sk is going away (during __sk_destruct). This patch fixes it by always passing "uncharge_mem = true". It is a noop to the task/inode/cgroup storage because they do not have the map_local_storage_(un)charge enabled in the map_ops. A followup patch will be done in bpf-next to remove the uncharge_mem argument. A selftest is added in the next patch. Fixes: c83597fa ("bpf: Refactor some inode/task/sk storage functions for reuse") Signed-off-by:
-
Martin KaFai Lau authored
'./test_progs -t test_local_storage' reported a splat: [ 27.137569] ============================= [ 27.138122] [ BUG: Invalid wait context ] [ 27.138650] 6.5.0-03980-gd11ae1b1 #247 Tainted: G O [ 27.139542] ----------------------------- [ 27.140106] test_progs/1729 is trying to lock: [ 27.140713] ffff8883ef047b88 (stock_lock){-.-.}-{3:3}, at: local_lock_acquire+0x9/0x130 [ 27.141834] other info that might help us debug this: [ 27.142437] context-{5:5} [ 27.142856] 2 locks held by test_progs/1729: [ 27.143352] #0: ffffffff84bcd9c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x40 [ 27.144492] #1: ffff888107deb2c0 (&storage->lock){..-.}-{2:2}, at: bpf_local_storage_update+0x39e/0x8e0 [ 27.145855] stack backtrace: [ 27.146274] CPU: 0 PID: 1729 Comm: test_progs Tainted: G O 6.5.0-03980-gd11ae1b1 #247 [ 27.147550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 27.149127] Call Trace: [ 27.149490] <TASK> [ 27.149867] dump_stack_lvl+0x130/0x1d0 [ 27.152609] dump_stack+0x14/0x20 [ 27.153131] __lock_acquire+0x1657/0x2220 [ 27.153677] lock_acquire+0x1b8/0x510 [ 27.157908] local_lock_acquire+0x29/0x130 [ 27.159048] obj_cgroup_charge+0xf4/0x3c0 [ 27.160794] slab_pre_alloc_hook+0x28e/0x2b0 [ 27.161931] __kmem_cache_alloc_node+0x51/0x210 [ 27.163557] __kmalloc+0xaa/0x210 [ 27.164593] bpf_map_kzalloc+0xbc/0x170 [ 27.165147] bpf_selem_alloc+0x130/0x510 [ 27.166295] bpf_local_storage_update+0x5aa/0x8e0 [ 27.167042] bpf_fd_sk_storage_update_elem+0xdb/0x1a0 [ 27.169199] bpf_map_update_value+0x415/0x4f0 [ 27.169871] map_update_elem+0x413/0x550 [ 27.170330] __sys_bpf+0x5e9/0x640 [ 27.174065] __x64_sys_bpf+0x80/0x90 [ 27.174568] do_syscall_64+0x48/0xa0 [ 27.175201] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 27.175932] RIP: 0033:0x7effb40e41ad [ 27.176357] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d8 [ 27.179028] RSP: 002b:00007ffe64c21fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141 [ 27.180088] RAX: ffffffffffffffda RBX: 00007ffe64c22768 RCX: 00007effb40e41ad [ 27.181082] RDX: 0000000000000020 RSI: 00007ffe64c22008 RDI: 0000000000000002 [ 27.182030] RBP: 00007ffe64c21ff0 R08: 0000000000000000 R09: 00007ffe64c22788 [ 27.183038] R10: 0000000000000064 R11: 0000000000000202 R12: 0000000000000000 [ 27.184006] R13: 00007ffe64c22788 R14: 00007effb42a1000 R15: 0000000000000000 [ 27.184958] </TASK> It complains about acquiring a local_lock while holding a raw_spin_lock. It means it should not allocate memory while holding a raw_spin_lock since it is not safe for RT. raw_spin_lock is needed because bpf_local_storage supports tracing context. In particular for task local storage, it is easy to get a "current" task PTR_TO_BTF_ID in tracing bpf prog. However, task (and cgroup) local storage has already been moved to bpf mem allocator which can be used after raw_spin_lock. The splat is for the sk storage. For sk (and inode) storage, it has not been moved to bpf mem allocator. Using raw_spin_lock or not, kzalloc(GFP_ATOMIC) could theoretically be unsafe in tracing context. However, the local storage helper requires a verifier accepted sk pointer (PTR_TO_BTF_ID), it is hypothetical if that (mean running a bpf prog in a kzalloc unsafe context and also able to hold a verifier accepted sk pointer) could happen. This patch avoids kzalloc after raw_spin_lock to silent the splat. There is an existing kzalloc before the raw_spin_lock. At that point, a kzalloc is very likely required because a lookup has just been done before. Thus, this patch always does the kzalloc before acquiring the raw_spin_lock and remove the later kzalloc usage after the raw_spin_lock. After this change, it will have a charge and then uncharge during the syscall bpf_map_update_elem() code path. This patch opts for simplicity and not continue the old optimization to save one charge and uncharge. This issue is dated back to the very first commit of bpf_sk_storage which had been refactored multiple times to create task, inode, and cgroup storage. This patch uses a Fixes tag with a more recent commit that should be easier to do backport. Fixes: b00fa38a ("bpf: Enable non-atomic allocations in local storage") Signed-off-by:
-
Ilya Leoshkevich authored
s390x eBPF programs use the following extension to the s390x calling convention: tail call counter is passed on stack at offset STK_OFF_TCCNT, which callees otherwise use as scratch space. Currently trampoline does not respect this and clobbers tail call counter. This breaks enforcing tail call limits in eBPF programs, which have trampolines attached to them. Fix by forwarding a copy of the tail call counter to the original eBPF program in the trampoline (for fexit), and by restoring it at the end of the trampoline (for fentry). Fixes: 528eb2cb ("s390/bpf: Implement arch_prepare_bpf_trampoline()") Reported-by:
Leon Hwang <hffilwlqm@gmail.com> Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
__bpf_prog_enter_recur() assigns bpf_tramp_run_ctx::saved_run_ctx before performing the recursion check which means in case of a recursion __bpf_prog_exit_recur() uses the previously set bpf_tramp_run_ctx::saved_run_ctx value. __bpf_prog_enter_sleepable_recur() assigns bpf_tramp_run_ctx::saved_run_ctx after the recursion check which means in case of a recursion __bpf_prog_exit_sleepable_recur() uses an uninitialized value. This does not look right. If I read the entry trampoline code right, then bpf_tramp_run_ctx isn't initialized upfront. Align __bpf_prog_enter_sleepable_recur() with __bpf_prog_enter_recur() and set bpf_tramp_run_ctx::saved_run_ctx before the recursion check is made. Remove the assignment of saved_run_ctx in kern_sys_bpf() since it happens a few cycles later. Fixes: e384c7b7 ("bpf, x86: Create bpf_tramp_run_ctx on the caller thread's stack") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20230830080405.251926-3-bigeasy@linutronix.de
-
Sebastian Andrzej Siewior authored
If __bpf_prog_enter_sleepable_recur() detects recursion then it returns 0 without undoing rcu_read_lock_trace(), migrate_disable() or decrementing the recursion counter. This is fine in the JIT case because the JIT code will jump in the 0 case to the end and invoke the matching exit trampoline (__bpf_prog_exit_sleepable_recur()). This is not the case in kern_sys_bpf() which returns directly to the caller with an error code. Add __bpf_prog_exit_sleepable_recur() as clean up in the recursion case. Fixes: b1d18a75 ("bpf: Extend sys_bpf commands for bpf_syscall programs.") Signed-off-by:
-
Jakub Kicinski authored
sphinx complains about the use of "%PHYLINK_PCS_NEG_*": Documentation/networking/kapi:144: ./include/linux/phylink.h:601: WARNING: Inline literal start-string without end-string. Documentation/networking/kapi:144: ./include/linux/phylink.h:633: WARNING: Inline literal start-string without end-string. These are not valid symbols so drop the '%' prefix. Alternatively we could use %PHYLINK_PCS_NEG_\* (escape the *) or use normal literal ``PHYLINK_PCS_NEG_*`` but there is already a handful of un-adorned DEFINE_* in this file. Fixes: f99d471a ("net: phylink: add PCS negotiation mode") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/all/20230626162908.2f149f98@canb.auug.org.au/Signed-off-by:
Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vladimir Oltean says: ==================== tc-cbs offload fixes for SJA1105 DSA Yanan Yang has pointed out to me that certain tc-cbs offloaded configurations do not appear to do any shaping on the LS1021A-TSN board (SJA1105T). This is due to an apparent documentation error that also made its way into the driver, which patch 1/3 now fixes. While investigating and then testing, I've found 2 more bugs, which are patches 2/3 and 3/3. ==================== Signed-off-by: -
Vladimir Oltean authored
The blamed commit left this delta behind: struct sja1105_cbs_entry { - u64 port; - u64 prio; + u64 port; /* Not used for SJA1110 */ + u64 prio; /* Not used for SJA1110 */ u64 credit_hi; u64 credit_lo; u64 send_slope; u64 idle_slope; }; but did not actually implement tc-cbs offload fully for the new switch. The offload is accepted, but it doesn't work. The difference compared to earlier switch generations is that now, the table of CBS shapers is sparse, because there are many more shapers, so the mapping between a {port, prio} and a table index is static, rather than requiring us to store the port and prio into the sja1105_cbs_entry. So, the problem is that the code programs the CBS shaper parameters at a dynamic table index which is incorrect. All that needs to be done for SJA1110 CBS shapers to work is to bypass the logic which allocates shapers in a dense manner, as for SJA1105, and use the fixed mapping instead. Fixes: 3e77e59b ("net: dsa: sja1105: add support for the SJA1110 switch family") Signed-off-by:Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
After running command [2] too many times in a row: [1] $ tc qdisc add dev sw2p0 root handle 1: mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 [2] $ tc qdisc replace dev sw2p0 parent 1:1 cbs offload 1 \ idleslope 120000 sendslope -880000 locredit -1320 hicredit 180 (aka more than priv->info->num_cbs_shapers times) we start seeing the following error message: Error: Specified device failed to setup cbs hardware offload. This comes from the fact that ndo_setup_tc(TC_SETUP_QDISC_CBS) presents the same API for the qdisc create and replace cases, and the sja1105 driver fails to distinguish between the 2. Thus, it always thinks that it must allocate the same shaper for a {port, queue} pair, when it may instead have to replace an existing one. Fixes: 4d752508 ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc") Signed-off-by: -
Vladimir Oltean authored
More careful measurement of the tc-cbs bandwidth shows that the stream bandwidth (effectively idleslope) increases, there is a larger and larger discrepancy between the rate limit obtained by the software Qdisc, and the rate limit obtained by its offloaded counterpart. The discrepancy becomes so large, that e.g. at an idleslope of 40000 (40Mbps), the offloaded cbs does not actually rate limit anything, and traffic will pass at line rate through a 100 Mbps port. The reason for the discrepancy is that the hardware documentation I've been following is incorrect. UM11040.pdf (for SJA1105P/Q/R/S) states about IDLE_SLOPE that it is "the rate (in unit of bytes/sec) at which the credit counter is increased". Cross-checking with UM10944.pdf (for SJA1105E/T) and UM11107.pdf (for SJA1110), the wording is different: "This field specifies the value, in bytes per second times link speed, by which the credit counter is increased". So there's an extra scaling for link speed that the driver is currently not accounting for, and apparently (empirically), that link speed is expressed in Kbps. I've pondered whether to pollute the sja1105_mac_link_up() implementation with CBS shaper reprogramming, but I don't think it is worth it. IMO, the UAPI exposed by tc-cbs requires user space to recalculate the sendslope anyway, since the formula for that depends on port_transmit_rate (see man tc-cbs), which is not an invariant from tc's perspective. So we use the offload->sendslope and offload->idleslope to deduce the original port_transmit_rate from the CBS formula, and use that value to scale the offload->sendslope and offload->idleslope to values that the hardware understands. Some numerical data points: 40Mbps stream, max interfering frame size 1500, port speed 100M --------------------------------------------------------------- tc-cbs parameters: idleslope 40000 sendslope -60000 locredit -900 hicredit 600 which result in hardware values: Before (doesn't work) After (works) credit_hi 600 600 credit_lo 900 900 send_slope 7500000 75 idle_slope 5000000 50 40Mbps stream, max interfering frame size 1500, port speed 1G ------------------------------------------------------------- tc-cbs parameters: idleslope 40000 sendslope -960000 locredit -1440 hicredit 60 which result in hardware values: Before (doesn't work) After (works) credit_hi 60 60 credit_lo 1440 1440 send_slope 120000000 120 idle_slope 5000000 5 5.12Mbps stream, max interfering frame size 1522, port speed 100M ----------------------------------------------------------------- tc-cbs parameters: idleslope 5120 sendslope -94880 locredit -1444 hicredit 77 which result in hardware values: Before (doesn't work) After (works) credit_hi 77 77 credit_lo 1444 1444 send_slope 11860000 118 idle_slope 640000 6 Tested on SJA1105T, SJA1105S and SJA1110A, at 1Gbps and 100Mbps. Fixes: 4d752508 ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc") Reported-by:
Yanan Yang <yanan.yang@nxp.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Change MIN_TXD and MIN_RXD to allow set rx/tx value between 64 and 80 Olga Zaborska says: Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx value between 64 and 80. All igb, igbvf and igc devices can use as low as 64 descriptors. ==================== Signed-off-by: -
Bodong Wang authored
ACL flow table is required in switchdev mode when metadata is enabled, driver creates such table when loading each vport. However, not every vport is loaded in switchdev mode. Such as ECPF if it's the eswitch manager. In this case, ACL flow table is still needed. To make it modularized, create ACL flow table for eswitch manager as default and skip such operations when loading manager vport. Also, there is no need to load the eswitch manager vport in switchdev mode. This means there is no need to load it on regular connect-x HCAs where the PF is the eswitch manager. This will avoid creating duplicate ACL flow table for host PF vport. Fixes: 29bcb6e4 ("net/mlx5e: E-Switch, Use metadata for vport matching in send-to-vport rules") Fixes: eb8e9fae ("mlx5/core: E-Switch, Allocate ECPF vport if it's an eswitch manager") Fixes: 5019833d ("net/mlx5: E-switch, Introduce helper function to enable/disable vports") Signed-off-by:
Bodong Wang <bodong@nvidia.com> Reviewed-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
-
Jianbo Liu authored
In the cited commit, the mirred devices are recorded and checked while parsing the actions. In order to avoid system crash, the duplicate action in a single rule is not allowed. But the rule is actually break down into several FTEs in different tables, for either mirroring, or the specified types of actions which use post action infrastructure. It will reject certain action list by mistake, for example: actions:enp8s0f0_1,set(ipv4(ttl=63)),enp8s0f0_0,enp8s0f0_1. Here the rule is split to two FTEs because of pedit action. To fix this issue, when parsing the rule actions, reset if_count to clear the mirred devices array if the rule is split to multiple FTEs, and then the duplicate checking is restarted. Fixes: 554fe75c ("net/mlx5e: Avoid duplicating rule destinations") Signed-off-by:Jianbo Liu <jianbol@nvidia.com> Reviewed-by:
Vlad Buslov <vladbu@nvidia.com> Signed-off-by:
-
Eric Dumazet authored
syzbot/KCSAN reported data-races in iptunnel_xmit_stats() [1] This can run from multiple cpus without mutual exclusion. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. [1] BUG: KCSAN: data-race in iptunnel_xmit / iptunnel_xmit read-write to 0xffff8881353df170 of 8 bytes by task 30263 on cpu 1: iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline] iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87 ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662 __netdev_start_xmit include/linux/netdevice.h:4889 [inline] netdev_start_xmit include/linux/netdevice.h:4903 [inline] xmit_one net/core/dev.c:3544 [inline] dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560 __dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340 dev_queue_xmit include/linux/netdevice.h:3082 [inline] __bpf_tx_skb net/core/filter.c:2129 [inline] __bpf_redirect_no_mac net/core/filter.c:2159 [inline] __bpf_redirect+0x723/0x9c0 net/core/filter.c:2182 ____bpf_clone_redirect net/core/filter.c:2453 [inline] bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425 ___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954 __bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195 bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline] __bpf_prog_run include/linux/filter.h:609 [inline] bpf_prog_run include/linux/filter.h:616 [inline] bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423 bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045 bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996 __sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353 __do_sys_bpf kernel/bpf/syscall.c:5439 [inline] __se_sys_bpf kernel/bpf/syscall.c:5437 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read-write to 0xffff8881353df170 of 8 bytes by task 30249 on cpu 0: iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline] iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87 ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662 __netdev_start_xmit include/linux/netdevice.h:4889 [inline] netdev_start_xmit include/linux/netdevice.h:4903 [inline] xmit_one net/core/dev.c:3544 [inline] dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560 __dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340 dev_queue_xmit include/linux/netdevice.h:3082 [inline] __bpf_tx_skb net/core/filter.c:2129 [inline] __bpf_redirect_no_mac net/core/filter.c:2159 [inline] __bpf_redirect+0x723/0x9c0 net/core/filter.c:2182 ____bpf_clone_redirect net/core/filter.c:2453 [inline] bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425 ___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954 __bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195 bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline] __bpf_prog_run include/linux/filter.h:609 [inline] bpf_prog_run include/linux/filter.h:616 [inline] bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423 bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045 bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996 __sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353 __do_sys_bpf kernel/bpf/syscall.c:5439 [inline] __se_sys_bpf kernel/bpf/syscall.c:5437 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000018830 -> 0x0000000000018831 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 30249 Comm: syz-executor.4 Not tainted 6.5.0-syzkaller-11704-g3f86ed6e #0 Fixes: 039f5062 ("ip_tunnel: Move stats update to iptunnel_xmit()") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Taehee Yoo authored
team interface has used a dynamic lockdep key to avoid false-positive lockdep deadlock detection. Virtual interfaces such as team usually have their own lock for protecting private data. These interfaces can be nested. team0 | team1 Each interface's lock is actually different(team0->lock and team1->lock). So, mutex_lock(&team0->lock); mutex_lock(&team1->lock); mutex_unlock(&team1->lock); mutex_unlock(&team0->lock); The above case is absolutely safe. But lockdep warns about deadlock. Because the lockdep understands these two locks are same. This is a false-positive lockdep warning. So, in order to avoid this problem, the team interfaces started to use dynamic lockdep key. The false-positive problem was fixed, but it introduced a new problem. When the new team virtual interface is created, it registers a dynamic lockdep key(creates dynamic lockdep key) and uses it. But there is the limitation of the number of lockdep keys. So, If so many team interfaces are created, it consumes all lockdep keys. Then, the lockdep stops to work and warns about it. In order to fix this problem, team interfaces use the subclass instead of the dynamic key. So, when a new team interface is created, it doesn't register(create) a new lockdep, but uses existed subclass key instead. It is already used by the bonding interface for a similar case. As the bonding interface does, the subclass variable is the same as the 'dev->nested_level'. This variable indicates the depth in the stacked interface graph. The 'dev->nested_level' is protected by RTNL and RCU. So, 'mutex_lock_nested()' for 'team->lock' requires RTNL or RCU. In the current code, 'team->lock' is usually acquired under RTNL, there is no problem with using 'dev->nested_level'. The 'team_nl_team_get()' and The 'lb_stats_refresh()' functions acquire 'team->lock' without RTNL. But these don't iterate their own ports nested so they don't need nested lock. Reproducer: for i in {0..1000} do ip link add team$i type team ip link add dummy$i master team$i type dummy ip link set dummy$i up ip link set team$i up done Splat looks like: BUG: MAX_LOCKDEP_ENTRIES too low! turning off the locking correctness validator. Please attach the output of /proc/lock_stat to the bug report CPU: 0 PID: 4104 Comm: ip Not tainted 6.5.0-rc7+ #45 Call Trace: <TASK> dump_stack_lvl+0x64/0xb0 add_lock_to_list+0x30d/0x5e0 check_prev_add+0x73a/0x23a0 ... sock_def_readable+0xfe/0x4f0 netlink_broadcast+0x76b/0xac0 nlmsg_notify+0x69/0x1d0 dev_open+0xed/0x130 ... Reported-by: syzbot+9bbbacfbf1e04d5221f7@syzkaller.appspotmail.com Fixes: 369f61be ("team: fix nested locking lockdep warning") Signed-off-by:Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Quan Tian authored
__skb_get_hash_symmetric() was added to compute a symmetric hash over the protocol, addresses and transport ports, by commit eb70db87 ("packet: Use symmetric hash for PACKET_FANOUT_HASH."). It uses flow_keys_dissector_symmetric_keys as the flow_dissector to incorporate IPv4 addresses, IPv6 addresses and ports. However, it should not specify the flag as FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL, which stops further dissection when an IPv6 flow label is encountered, making transport ports not being incorporated in such case. As a consequence, the symmetric hash is based on 5-tuple for IPv4 but 3-tuple for IPv6 when flow label is present. It caused a few problems, e.g. when nft symhash and openvswitch l4_sym rely on the symmetric hash to perform load balancing as different L4 flows between two given IPv6 addresses would always get the same symmetric hash, leading to uneven traffic distribution. Removing the use of FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL makes sure the symmetric hash is based on 5-tuple for both IPv4 and IPv6 consistently. Fixes: eb70db87 ("packet: Use symmetric hash for PACKET_FANOUT_HASH.") Reported-by:
Lars Ekman <uablrek@gmail.com> Closes: https://github.com/antrea-io/antrea/issues/5457Signed-off-by:
Quan Tian <qtian@vmware.com> Reviewed-by:
-
- 05 Sep, 2023 8 commits
-
-
Olga Zaborska authored
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx value between 64 and 80. All igb devices can use as low as 64 descriptors. This change will unify igb with other drivers. Based on commit 7b1be198 ("e1000e: lower ring minimum size to 64") Fixes: 9d5c8243 ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by:
Olga Zaborska <olga.zaborska@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Olga Zaborska authored
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx value between 64 and 80. All igbvf devices can use as low as 64 descriptors. This change will unify igbvf with other drivers. Based on commit 7b1be198 ("e1000e: lower ring minimum size to 64") Fixes: d4e0fe01 ("igbvf: add new driver to support 82576 virtual functions") Signed-off-by:
Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by:
-
Olga Zaborska authored
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx value between 64 and 80. All igc devices can use as low as 64 descriptors. This change will unify igc with other drivers. Based on commit 7b1be198 ("e1000e: lower ring minimum size to 64") Fixes: 0507ef8a ("igc: Add transmit and receive fastpath and interrupt handlers") Signed-off-by:
Naama Meir <naamax.meir@linux.intel.com> Signed-off-by:
-
Geetha sowjanya authored
The smq value used in the CN10K NIX AQ instruction enqueue mailbox handler was truncated to 9-bit value from 10-bit value because of typecasting the CN10K mbox request structure to the CN9K structure. Though this hasn't caused any problems when programming the NIX SQ context to the HW because the context structure is the same size. However, this causes a problem when accessing the structure parameters. This patch reads the right smq value for each platform. Fixes: 30077d21 ("octeontx2-af: cn10k: Update NIX/NPA context structure") Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
-
Eric Dumazet authored
This is a follow up of commit 915d975b ("net: deal with integer overflows in kmalloc_reserve()") based on David Laight feedback. Back in 2010, I failed to realize malicious users could set dev->mtu to arbitrary values. This mtu has been since limited to 0x7fffffff but regardless of how big dev->mtu is, it makes no sense for igmpv3_newpack() to allocate more than IP_MAX_MTU and risk various skb fields overflows. Fixes: 57e1ab6e ("igmp: refine skb allocations") Link: https://lore.kernel.org/netdev/d273628df80f45428e739274ab9ecb72@AcuMS.aculab.com/Signed-off-by:
David Laight <David.Laight@ACULAB.COM> Cc: Kyle Zeng <zengyhkyle@gmail.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Sabrina Dubroca authored
This reverts commit ab046a5d. It was trying to work around an issue at the crypto layer by excluding ASYNC implementations of gcm(aes), because a bug in the AESNI version caused reordering when some requests bypassed the cryptd queue while older requests were still pending on the queue. This was fixed by commit 38b2f68b ("crypto: aesni - Fix cryptd reordering problem on gcm"), which pre-dates ab046a5d. Herbert Xu confirmed that all ASYNC implementations are expected to maintain the ordering of completions wrt requests, so we can use them in MACsec. On my test machine, this restores the performance of a single netperf instance, from 1.4Gbps to 4.4Gbps. Link: https://lore.kernel.org/netdev/9328d206c5d9f9239cae27e62e74de40b258471d.1692279161.git.sd@queasysnail.net/T/ Link: https://lore.kernel.org/netdev/1b0cec71-d084-8153-2ba4-72ce71abeb65@byu.edu/ Link: https://lore.kernel.org/netdev/d335ddaa-18dc-f9f0-17ee-9783d3b2ca29@mailbox.tu-dresden.de/ Fixes: ab046a5d ("net: macsec: preserve ingress frame ordering") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/11c952469d114db6fb29242e1d9545e61f52f512.1693757159.git.sd@queasysnail.netSigned-off-by:
-
Shigeru Yoshida authored
kcm_exit_net() should call mutex_destroy() on knet->mutex. This is especially needed if CONFIG_DEBUG_MUTEXES is enabled. Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Signed-off-by:
Shigeru Yoshida <syoshida@redhat.com> Link: https://lore.kernel.org/r/20230902170708.1727999-1-syoshida@redhat.comSigned-off-by:
-
valis authored
When the plug qdisc is used as a class of the qfq qdisc it could trigger a UAF. This issue can be reproduced with following commands: tc qdisc add dev lo root handle 1: qfq tc class add dev lo parent 1: classid 1:1 qfq weight 1 maxpkt 512 tc qdisc add dev lo parent 1:1 handle 2: plug tc filter add dev lo parent 1: basic classid 1:1 ping -c1 127.0.0.1 and boom: [ 285.353793] BUG: KASAN: slab-use-after-free in qfq_dequeue+0xa7/0x7f0 [ 285.354910] Read of size 4 at addr ffff8880bad312a8 by task ping/144 [ 285.355903] [ 285.356165] CPU: 1 PID: 144 Comm: ping Not tainted 6.5.0-rc3+ #4 [ 285.357112] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 285.358376] Call Trace: [ 285.358773] <IRQ> [ 285.359109] dump_stack_lvl+0x44/0x60 [ 285.359708] print_address_description.constprop.0+0x2c/0x3c0 [ 285.360611] kasan_report+0x10c/0x120 [ 285.361195] ? qfq_dequeue+0xa7/0x7f0 [ 285.361780] qfq_dequeue+0xa7/0x7f0 [ 285.362342] __qdisc_run+0xf1/0x970 [ 285.362903] net_tx_action+0x28e/0x460 [ 285.363502] __do_softirq+0x11b/0x3de [ 285.364097] do_softirq.part.0+0x72/0x90 [ 285.364721] </IRQ> [ 285.365072] <TASK> [ 285.365422] __local_bh_enable_ip+0x77/0x90 [ 285.366079] __dev_queue_xmit+0x95f/0x1550 [ 285.366732] ? __pfx_csum_and_copy_from_iter+0x10/0x10 [ 285.367526] ? __pfx___dev_queue_xmit+0x10/0x10 [ 285.368259] ? __build_skb_around+0x129/0x190 [ 285.368960] ? ip_generic_getfrag+0x12c/0x170 [ 285.369653] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 285.370390] ? csum_partial+0x8/0x20 [ 285.370961] ? raw_getfrag+0xe5/0x140 [ 285.371559] ip_finish_output2+0x539/0xa40 [ 285.372222] ? __pfx_ip_finish_output2+0x10/0x10 [ 285.372954] ip_output+0x113/0x1e0 [ 285.373512] ? __pfx_ip_output+0x10/0x10 [ 285.374130] ? icmp_out_count+0x49/0x60 [ 285.374739] ? __pfx_ip_finish_output+0x10/0x10 [ 285.375457] ip_push_pending_frames+0xf3/0x100 [ 285.376173] raw_sendmsg+0xef5/0x12d0 [ 285.376760] ? do_syscall_64+0x40/0x90 [ 285.377359] ? __static_call_text_end+0x136578/0x136578 [ 285.378173] ? do_syscall_64+0x40/0x90 [ 285.378772] ? kasan_enable_current+0x11/0x20 [ 285.379469] ? __pfx_raw_sendmsg+0x10/0x10 [ 285.380137] ? __sock_create+0x13e/0x270 [ 285.380673] ? __sys_socket+0xf3/0x180 [ 285.381174] ? __x64_sys_socket+0x3d/0x50 [ 285.381725] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 285.382425] ? __rcu_read_unlock+0x48/0x70 [ 285.382975] ? ip4_datagram_release_cb+0xd8/0x380 [ 285.383608] ? __pfx_ip4_datagram_release_cb+0x10/0x10 [ 285.384295] ? preempt_count_sub+0x14/0xc0 [ 285.384844] ? __list_del_entry_valid+0x76/0x140 [ 285.385467] ? _raw_spin_lock_bh+0x87/0xe0 [ 285.386014] ? __pfx__raw_spin_lock_bh+0x10/0x10 [ 285.386645] ? release_sock+0xa0/0xd0 [ 285.387148] ? preempt_count_sub+0x14/0xc0 [ 285.387712] ? freeze_secondary_cpus+0x348/0x3c0 [ 285.388341] ? aa_sk_perm+0x177/0x390 [ 285.388856] ? __pfx_aa_sk_perm+0x10/0x10 [ 285.389441] ? check_stack_object+0x22/0x70 [ 285.390032] ? inet_send_prepare+0x2f/0x120 [ 285.390603] ? __pfx_inet_sendmsg+0x10/0x10 [ 285.391172] sock_sendmsg+0xcc/0xe0 [ 285.391667] __sys_sendto+0x190/0x230 [ 285.392168] ? __pfx___sys_sendto+0x10/0x10 [ 285.392727] ? kvm_clock_get_cycles+0x14/0x30 [ 285.393328] ? set_normalized_timespec64+0x57/0x70 [ 285.393980] ? _raw_spin_unlock_irq+0x1b/0x40 [ 285.394578] ? __x64_sys_clock_gettime+0x11c/0x160 [ 285.395225] ? __pfx___x64_sys_clock_gettime+0x10/0x10 [ 285.395908] ? _copy_to_user+0x3e/0x60 [ 285.396432] ? exit_to_user_mode_prepare+0x1a/0x120 [ 285.397086] ? syscall_exit_to_user_mode+0x22/0x50 [ 285.397734] ? do_syscall_64+0x71/0x90 [ 285.398258] __x64_sys_sendto+0x74/0x90 [ 285.398786] do_syscall_64+0x64/0x90 [ 285.399273] ? exit_to_user_mode_prepare+0x1a/0x120 [ 285.399949] ? syscall_exit_to_user_mode+0x22/0x50 [ 285.400605] ? do_syscall_64+0x71/0x90 [ 285.401124] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 285.401807] RIP: 0033:0x495726 [ 285.402233] Code: ff ff ff f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 09 [ 285.404683] RSP: 002b:00007ffcc25fb618 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 285.405677] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 0000000000495726 [ 285.406628] RDX: 0000000000000040 RSI: 0000000002518750 RDI: 0000000000000000 [ 285.407565] RBP: 00000000005205ef R08: 00000000005f8838 R09: 000000000000001c [ 285.408523] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000002517634 [ 285.409460] R13: 00007ffcc25fb6f0 R14: 0000000000000003 R15: 0000000000000000 [ 285.410403] </TASK> [ 285.410704] [ 285.410929] Allocated by task 144: [ 285.411402] kasan_save_stack+0x1e/0x40 [ 285.411926] kasan_set_track+0x21/0x30 [ 285.412442] __kasan_slab_alloc+0x55/0x70 [ 285.412973] kmem_cache_alloc_node+0x187/0x3d0 [ 285.413567] __alloc_skb+0x1b4/0x230 [ 285.414060] __ip_append_data+0x17f7/0x1b60 [ 285.414633] ip_append_data+0x97/0xf0 [ 285.415144] raw_sendmsg+0x5a8/0x12d0 [ 285.415640] sock_sendmsg+0xcc/0xe0 [ 285.416117] __sys_sendto+0x190/0x230 [ 285.416626] __x64_sys_sendto+0x74/0x90 [ 285.417145] do_syscall_64+0x64/0x90 [ 285.417624] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 285.418306] [ 285.418531] Freed by task 144: [ 285.418960] kasan_save_stack+0x1e/0x40 [ 285.419469] kasan_set_track+0x21/0x30 [ 285.419988] kasan_save_free_info+0x27/0x40 [ 285.420556] ____kasan_slab_free+0x109/0x1a0 [ 285.421146] kmem_cache_free+0x1c2/0x450 [ 285.421680] __netif_receive_skb_core+0x2ce/0x1870 [ 285.422333] __netif_receive_skb_one_core+0x97/0x140 [ 285.423003] process_backlog+0x100/0x2f0 [ 285.423537] __napi_poll+0x5c/0x2d0 [ 285.424023] net_rx_action+0x2be/0x560 [ 285.424510] __do_softirq+0x11b/0x3de [ 285.425034] [ 285.425254] The buggy address belongs to the object at ffff8880bad31280 [ 285.425254] which belongs to the cache skbuff_head_cache of size 224 [ 285.426993] The buggy address is located 40 bytes inside of [ 285.426993] freed 224-byte region [ffff8880bad31280, ffff8880bad31360) [ 285.428572] [ 285.428798] The buggy address belongs to the physical page: [ 285.429540] page:00000000f4b77674 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbad31 [ 285.430758] flags: 0x100000000000200(slab|node=0|zone=1) [ 285.431447] page_type: 0xffffffff() [ 285.431934] raw: 0100000000000200 ffff88810094a8c0 dead000000000122 0000000000000000 [ 285.432757] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 [ 285.433562] page dumped because: kasan: bad access detected [ 285.434144] [ 285.434320] Memory state around the buggy address: [ 285.434828] ffff8880bad31180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 285.435580] ffff8880bad31200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 285.436264] >ffff8880bad31280: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 285.436777] ^ [ 285.437106] ffff8880bad31300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 285.437616] ffff8880bad31380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 285.438126] ================================================================== [ 285.438662] Disabling lock debugging due to kernel taint Fix this by: 1. Changing sch_plug's .peek handler to qdisc_peek_dequeued(), a function compatible with non-work-conserving qdiscs 2. Checking the return value of qdisc_dequeue_peeked() in sch_qfq. Fixes: 462dbc91 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Reported-by:
valis <sec@valis.email> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20230901162237.11525-1-jhs@mojatatu.comSigned-off-by:
-
- 04 Sep, 2023 5 commits
-
-
David S. Miller authored
Kuniyuki Iwashima says: ==================== af_unix: Fix four data-races. While running syzkaller, KCSAN reported 3 data-races with systemd-coredump using AF_UNIX sockets. This series fixes the three and another one inspiered by one of the reports. ==================== Signed-off-by: -
Kuniyuki Iwashima authored
As with sk->sk_shutdown shown in the previous patch, sk->sk_err can be read locklessly by unix_dgram_sendmsg(). Let's use READ_ONCE() for sk_err as well. Note that the writer side is marked by commit cc04410a ("af_unix: annotate lockless accesses to sk->sk_err"). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
-
Kuniyuki Iwashima authored
sk->sk_shutdown is changed under unix_state_lock(sk), but unix_dgram_sendmsg() calls two functions to read sk_shutdown locklessly. sock_alloc_send_pskb `- sock_wait_for_wmem Let's use READ_ONCE() there. Note that the writer side was marked by commit e1d09c2c ("af_unix: Fix data races around sk->sk_shutdown."). BUG: KCSAN: data-race in sock_alloc_send_pskb / unix_release_sock write (marked) to 0xffff8880069af12c of 1 bytes by task 1 on cpu 1: unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631 unix_release+0x59/0x80 net/unix/af_unix.c:1053 __sock_release+0x7d/0x170 net/socket.c:654 sock_close+0x19/0x30 net/socket.c:1386 __fput+0x2a3/0x680 fs/file_table.c:384 ____fput+0x15/0x20 fs/file_table.c:412 task_work_run+0x116/0x1a0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 read to 0xffff8880069af12c of 1 bytes by task 28650 on cpu 0: sock_alloc_send_pskb+0xd2/0x620 net/core/sock.c:2767 unix_dgram_sendmsg+0x2f8/0x14f0 net/unix/af_unix.c:1944 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 value changed: 0x00 -> 0x03 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 28650 Comm: systemd-coredum Not tainted 6.4.0-11989-g68433066 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
-
Kuniyuki Iwashima authored
unix_tot_inflight is changed under spin_lock(unix_gc_lock), but unix_release_sock() reads it locklessly. Let's use READ_ONCE() for unix_tot_inflight. Note that the writer side was marked by commit 9d6d7f1c ("af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress") BUG: KCSAN: data-race in unix_inflight / unix_release_sock write (marked) to 0xffffffff871852b8 of 4 bytes by task 123 on cpu 1: unix_inflight+0x130/0x180 net/unix/scm.c:64 unix_attach_fds+0x137/0x1b0 net/unix/scm.c:123 unix_scm_to_skb net/unix/af_unix.c:1832 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1955 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x148/0x160 net/socket.c:747 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2493 ___sys_sendmsg+0xc6/0x140 net/socket.c:2547 __sys_sendmsg+0x94/0x140 net/socket.c:2576 __do_sys_sendmsg net/socket.c:2585 [inline] __se_sys_sendmsg net/socket.c:2583 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2583 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffffffff871852b8 of 4 bytes by task 4891 on cpu 0: unix_release_sock+0x608/0x910 net/unix/af_unix.c:671 unix_release+0x59/0x80 net/unix/af_unix.c:1058 __sock_release+0x7d/0x170 net/socket.c:653 sock_close+0x19/0x30 net/socket.c:1385 __fput+0x179/0x5e0 fs/file_table.c:321 ____fput+0x15/0x20 fs/file_table.c:349 task_work_run+0x116/0x1a0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 4891 Comm: systemd-coredum Not tainted 6.4.0-rc5-01219-gfa0e21fa #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 9305cfa4 ("[AF_UNIX]: Make unix_tot_inflight counter non-atomic") Reported-by:
-
Kuniyuki Iwashima authored
user->unix_inflight is changed under spin_lock(unix_gc_lock), but too_many_unix_fds() reads it locklessly. Let's annotate the write/read accesses to user->unix_inflight. BUG: KCSAN: data-race in unix_attach_fds / unix_inflight write to 0xffffffff8546f2d0 of 8 bytes by task 44798 on cpu 1: unix_inflight+0x157/0x180 net/unix/scm.c:66 unix_attach_fds+0x147/0x1e0 net/unix/scm.c:123 unix_scm_to_skb net/unix/af_unix.c:1827 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 read to 0xffffffff8546f2d0 of 8 bytes by task 44814 on cpu 0: too_many_unix_fds net/unix/scm.c:101 [inline] unix_attach_fds+0x54/0x1e0 net/unix/scm.c:110 unix_scm_to_skb net/unix/af_unix.c:1827 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 value changed: 0x000000000000000c -> 0x000000000000000d Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 44814 Comm: systemd-coredum Not tainted 6.4.0-11989-g68433066 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 712f4aad ("unix: properly account for FDs passed over unix sockets") Reported-by:
Willy Tarreau <w@1wt.eu> Reviewed-by:
-
